How it Works
Zebra Technologies
Loading...
WMC7300715
User Manual
70 pgs2.05 Mb0

Zebra Technologies WMC7300715 User Manual

MOTOMESH 1.2
Wireless Modem Card
Users Guide
January 2007
6881011Y52-D
This page intentionally left blank.
6881011Y52-D January 2007
ii
MOTOMESH 1.2 Wireless Modem Card Users Guide
Copyrights
The Motorola products described in this document may include copyrighted Motorola computer programs. Laws in the United States and other countries reserve for Motorola certain exclusive rights for copyrighted computer programs. Accordingly, any copyrighted Motorola computer programs contained in the Motorola products described in this document may not be copied or reproduced in any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant either directly or by implication, estoppels or otherwise, any license under the copyrights, patents or patent applications of Motorola, except for the normal nonexclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Disclaimer
Please note that certain features, facilities and capabilities described in this document may not be applicable to or licensed for use on a particular system, or may be dependent upon the characteristics of a particular mobile subscriber unit or configuration of certain parameters. Please refer to your Motorola contact for further information.
Trademarks
Motorola, the Motorola logo, and all other trademarks identified as such herein are trademarks of Motorola, Inc. All other product or service names are the property of their respective owners.
Copyrights
© 2007, 2008 Motorola, Inc. All rights reserved. No part of this document may be reproduced, transmitted, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, without the prior written permission of Motorola, Inc.
6881011Y52-D January 2007
iii
This page intentionally left blank.
6881011Y52-D January 2007
iv
Table
of
Contents
Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
Chapter 1: Introduction ...........................................................................................1-1
General System Requirements .............................................................................................................................. 1-1
Windows XP Minimum System Requirements ................................................................................................ 1-1
Windows 2000 Minimum System Requirements ............................................................................................. 1-1
What’s in the Box .............................................................................................................................................1-2
External Connections and LED Indicators .................................................................................................................... 1-2
Chapter 2: Software Installation .............................................................................2-1
Installing MOTOMESH Client Software on Windows XP................................................................................... 2-1
Installing MOTOMESH Client Software on Windows 2000................................................................................ 2-7
Chapter 3: Wireless Modem Card Installation.......................................................3-1
Prerequisite Installation Information..................................................................................................................... 3-1
Working with the Antenna .................................................................................................................................... 3-1
Connecting the Antenna Assembly .................................................................................................................. 3-1
Disconnecting a Pigtail Antenna Assembly...................................................................................................... 3-2
Connecting the Magnetic Antenna Assembly (Optional) ................................................................................. 3-3
Installing the WMC6300 and the WMC7300 ....................................................................................................... 3-5
Installing the Wireless Modem Card ................................................................................................................3-5
Removing the Wireless Modem Card.............................................................................................................3-11
Chapter 4: MeshTray ...............................................................................................4-1
MeshTray System Tray Icon Status ...................................................................................................................... 4-1
Starting MeshTray ............................................................................................................................................ 4-2
MeshTray Tab Contents ........................................................................................................................................ 4-3
Status Tab ......................................................................................................................................................... 4-3
Configuration Tab ............................................................................................................................................ 4-5
Geographic Position ...................................................................................................................................................... 4-5
Geographic Reporting .............................................................................................................................................. 4-5
Control Channel Configuration ..................................................................................................................................... 4-6
Changing the Control Channel................................................................................................................................. 4-6
Enabling the WMCs Internal DHCP Server Feature ..................................................................................................... 4-7
Link Down When Unassociated Checkbox ................................................................................................................... 4-7
Setting a User Supplied IP Address ......................................................................................................................... 4-9
Configuring the DNS Address ............................................................................................................................ 4-10
6881011Y52-D January 2007
v
Geo Position Tab ............................................................................................................................................ 4-12
MeshTray Routing Tab................................................................................................................................... 4-12
Routing Table.............................................................................................................................................................. 4-13
Neighbor Table............................................................................................................................................................ 4-13
Threshold..................................................................................................................................................................... 4-13
Routing Icons .............................................................................................................................................................. 4-13
MeshTray Security Tab .................................................................................................................................. 4-14
Require Authentication to IAP Connections................................................................................................................ 4-14
Authentication Control for Incoming Connections ................................................................................................ 4-15
IAP Authentication...................................................................................................................................................... 4-16
Peer Authentication ..................................................................................................................................................... 4-16
MeshTray Authentication Activity Tab.......................................................................................................... 4-17
Chapter 5: Customer Information...........................................................................5-1
Customer Service Information .............................................................................................................................. 5-1
Obtaining Support ............................................................................................................................................ 5-1
System Information ....................................................................................................................................................... 5-1
Return Material Request................................................................................................................................................ 5-2
Radio Products and Services Division........................................................................................................................... 5-2
Radio Products and Services Division Telephone Numbers .................................................................................... 5-2
Returning System Components to Motorola ................................................................................................................. 5-2
Returning FREs ............................................................................................................................................................. 5-2
Chapter 6: Certification and Safety Information ...................................................6-1
FCC Regulatory Information ................................................................................................................................6-1
FCC Information .............................................................................................................................................. 6-1
FCC RF Radiation Exposure Statement ........................................................................................................... 6-2
Safety Information for the MEA WMC7300.................................................................................................... 6-2
FCC RF Radiation Exposure Statement ........................................................................................................... 6-3
Safety Information for the MOTOMESH Products .............................................................................................. 6-3
Safety Certification........................................................................................................................................... 6-3
WMC7300 Product Label Example.................................................................................................................. 6-4
6881011Y52-D January 2007
vi
List of Figures
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
List
of
Figures
Figure 1-1 WMC showing Antenna Port and LED Indicators .............................................................. 1-2
Figure 2-1 MOTOMESH Setup - Welcome Dialog (XP)..................................................................... 2-2
Figure 2-2 MOTOMESH Setup – Startup Options (XP) ...................................................................... 2-2
Figure 2-3 MOTOMESH Setup - Ready to Install (XP)....................................................................... 2-3
Figure 2-4 MOTOMESH Setup - Previously Installed Software Detected (XP).................................. 2-3
Figure 2-5 MOTOMESH Setup - Uninstalling Software (XP) ............................................................. 2-4
Figure 2-6 MOTOMESH Setup - Installing Files Window (XP).......................................................... 2-4
Figure 2-7 Software Installation Dialog Box ........................................................................................ 2-5
Figure 2-8 Software Installation Dialog Box ........................................................................................ 2-5
Figure 2-9 Software Installation Dialog Box – Select Options............................................................. 2-6
Figure 2-10 Figure 2-11 Figure 2-12 Figure 2-13
Figure 2-14 MOTOMESH Setup - Software Previously Installed (W2K)......................................... 2-9
Figure 2-15 Figure 2-16 Figure 2-17 Figure 2-18 Figure 2-19 Figure 2-20 Figure 2-21 Figure 2-22
Figure 3-1 Attach the Antenna to the WMC6300 or the WMC7300 .................................................... 3-2
Figure 3-2 Magnetic Mount Antenna, N-Type SMA to MMCX adapter, and WMC6300................... 3-3
Figure 3-3 Antenna Cable end connecting to MMCX adapter.............................................................. 3-4
Figure 3-4 N-Type SMA to the MMCX adapter connecting to the WMC6300 ................................... 3-4
Figure 3-5 Installing the Wireless Modem Card ................................................................................... 3-5
Figure 3-6 Proper Orientation of Antenna............................................................................................. 3-6
Figure 3-7 Found New Hardware Popup Dialog box............................................................................ 3-6
Figure 3-8 Found New Hardware Wizard – Serial PC Card ................................................................. 3-7
Figure 3-9 Found New Hardware Wizard - Loading Files.................................................................... 3-7
Figure 3-10 Figure 3-11 Figure 3-12 Figure 3-13 Figure 3-14 Figure 3-15
MOTOMESH Setup - MOTOMESH Installed Successfully (XP)................................. 2-6
MOTOMESH Setup - Installer Setup Dialog Box (W2K)) ............................................ 2-7
MOTOMESH Setup – Startup Options Dialog Box (W2K)........................................... 2-8
MOTOMESH Setup - Ready to Install (W2K)............................................................... 2-8
Confirm Action – Remove Existing Components........................................................... 2-9
Removing Previous Software From Your Computer (W2K).......................................... 2-9
Confirm File Deletion (W2K)....................................................................................... 2-10
Uninstalling Software – Deleting Files (W2K)............................................................. 2-10
Installing Files Window (W2K).................................................................................... 2-11
Performing Setup Actions (W2K)................................................................................. 2-11
MOTOMESH Setup - Select Options Dialog Box........................................................ 2-12
MOTOMESH Installed Successfully (W2K)................................................................ 2-13
Hardware Installation Dialog Box................................................................................... 3-8
Found New Hardware Wizard – Complete ..................................................................... 3-8
Found New Hardware Wizard......................................................................................... 3-9
Found New Hardware Wizard Loading Files.................................................................. 3-9
Hardware Installation Dialog Box - WMC6300 PC Card............................................. 3-10
Found New Hardware Wizard Complete...................................................................... 3-10
6881011Y52-D January 2007
vii
List of Figures
Figure 3-16 Figure 3-17 Figure 3-18 Figure 3-19
Figure 4-1 MeshTray Status Tab........................................................................................................... 4-3
Figure 4-2 MeshTray Configuration Tab .............................................................................................. 4-5
Figure 4-3 Password Protection Panel................................................................................................... 4-6
Figure 4-4 MeshTray and Windows TCPIP, DHCP, and DNS Setting Options................................... 4-8
Figure 4-5 Control Panel – Network and Internet Connections Icon.................................................... 4-9
Figure 4-6 Network and Dial-up Connections Window........................................................................ 4-9
Figure 4-7 Local Area Connection Properties Dialog Box ................................................................... 4-9
Figure 4-8 Local Area Connection Properties Dialog Box ................................................................. 4-11
Figure 4-9 MeshTray Geo Position Tab.............................................................................................. 4-12
Figure 4-10 Figure 4-11 Figure 4-12 Figure 4-13
Found New Hardware - Wizard Complete.................................................................... 3-11
Unplug or Eject Hardware Icon .................................................................................... 3-11
Safe to Remove Hardware - WMC6300 Card............................................................... 3-11
Removing the WMC6300 from the PCMCIA slot........................................................ 3-12
MeshTray Routing Tab ................................................................................................. 4-13
MeshTray Security Tab................................................................................................. 4-14
Peer Authentication – Add New Group ........................................................................ 4-16
MeshTray Authentication Activity Tab ........................................................................ 4-17
6881011Y52-D January 2007
viii
List of Tables
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
List
of
Tables
Table 4-1 MeshTray Icon States .......................................................................................................... 4-1
Table 4-2 Status Tab - Adapter Information Section........................................................................... 4-3
Table 4-3 Geographic Reporting section ............................................................................................. 4-5
Table 4-4 Routing Tab Icons ............................................................................................................. 4-13
Table 4-5 Authentication Control Icons............................................................................................. 4-15
Table 4-6 IAP Authentication Dialog ................................................................................................ 4-16
6881011Y52-D January 2007
ix
List of Tables
This page intentionally left blank.
6881011Y52-D January 2007
x
List of Procedures
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
List
of
Procedures
Procedure 2-1 Procedure 2-2 Procedure 3-1 Procedure 3-2 Procedure 3-3 Procedure 3-4 Procedure 3-5 Procedure 4-1 Procedure 4-2 Procedure 4-3 Procedure 4-4
MOTOMESH Client Software Installation on Windows XP ..................................... 2-1
MOTOMESH Client Software Installation on Windows 2000 .................................. 2-7
Connecting the Antenna Assembly............................................................................. 3-1
Disconnecting the Antenna Assembly........................................................................ 3-2
Installing the Magnetic Mount Antenna Assembly .................................................... 3-3
Installing the Wireless Modem Card .......................................................................... 3-5
Removing the Wireless Modem Card....................................................................... 3-11
Starting MeshTray ...................................................................................................... 4-2
Changing the Control Channel.................................................................................... 4-6
Setting a User Supplied Address................................................................................. 4-9
Configuring the DNS Address.................................................................................. 4-10
6881011Y52-D January 2007
xi
List of Procedures
This page intentionally left blank.
6881011Y52-D January 2007
xii
Chapter 1: Introduction
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
This guide will assist you with the use, installation, and configuration of the WMC6300 and the WMC7300 Wireless Modem Card (WMC). Due to the physical similarities of the two WMC cards, many of the explanations and procedures described in this manual apply to both cards except where expressly noted.
In addition, a section describing the MeshTray application, which is used for direct user interface with the Wireless Modem Card, is also included.
Chapter
1
General System Requirements
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .
Host computers must comply with the following minimum requirements to ensure optimal performance of the WMC6300 and the WMC7300.
Windows XP Minimum System Requirements
• Laptop or Notebook PC running the Microsoft Windows XP
(Service Pack 1) operating system
• 500 MHz Processor
• 10 MB of available hard disk storage
• Keyboard, Mouse, CD-ROM drive or DVD drive
• Available Type II PCMCIA card slot in the Host device
Windows 2000 Minimum System Requirements
• Laptop or Notebook PC running Microsoft Windows 2000
• (Service Pack 3) operating system
• 500 MHz Processor
• 10 MB of available hard disk storage
6881011Y52-D January 2007
1-1
Chapter 1: Introduction
• Keyboard, Mouse, CD-ROM drive or DVD drive
• Available Type II PCMCIA card slot in the Host device
What’s in the Box
Each MEA WMC6300 and WMC7300 (Wireless Modem Card) is a full-featured wireless networking interface. The following is a list of the items provided with each Wireless Modem Card:
• WMC6300 or a WMC7300 Wireless Modem Card
• Antenna with a MMCX connector
• Wireless Modem Card Software and Documentation CD ROM
The CD ROM contains a PDF version of the Wireless Modem Card User’s Guide. The CD also contains an installation executable to load Adobe Acrobat Reader software if it is not already resident on your computer.
External Connections and LED Indicators
The WMC6300 and the WMC7300 Wireless Modem Card is designed for insertion into an industry­standard Type II PCMCIA card slot located in a Host device. The Wireless Modem Cards have an antenna port to connect the external antenna and two LED Indicators. As shown in Figure 1-1 the red LED is the transmit indicator and the green LED is the receive indicator.
Figure 1-1 WMC showing Antenna Port and LED Indicators
6881011Y52-D January 2007
1-2
Chapter
2
Chapter 2: Software Installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . .
This chapter will assist you with the software installation portion of the process and is further separated into two main sections: Installing MOTOMESH Client Software on Windows XP and Installing MOTOMESH Client Software on Windows 2000.
Installing MOTOMESH Client Software on Windows XP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .
The following procedure outlines the installation of the MOTOMESH client software on a typical Windows XP platform. Some of the steps may vary slightly based on the configuration of the individual computers.
If you are running Windows XP Service Pack 2 (SP2), Windows Firewall is turned on by default. It is recommended that you disable the firewall when using your Wireless Modem Card.
Procedure 2-1 MOTOMESH Client Software Installation on Windows XP
1
Close and exit any existing MOTOMESH applications running on the computer prior to installation.
2
Insert the Software and Documentation CD into the CD-ROM drive.
3
If the installation program does not start automatically, open the Windows Start menu. Click on Run
then type the following into the dialog box: d:\setupmotomeshclient.exe
where d: specifies the CD-ROM drive and click the OK button.
4
Click the Next button to continue the installation process.
5
The MOTOMESH Setup dialog box will be displayed as shown in Figure 2-1.
6881011Y52-D January 2007
2-1
Chapter 2: Software Installation
6
Click the Next button to continue the installation process.
Figure 2-1 MOTOMESH Setup - Welcome Dialog (XP)
7
In the Startup Options dialog make your selection by checking or un-checking the available options. Click on the Next button to continue the installation process.
It is recommended that the “Automatically Launch MeshTray at Startup” checkbox is selected; allowing MeshTray to be available each time the computer is restarted and whenever a Wireless Modem Card (WMC) is inserted.
Figure 2-2 MOTOMESH Setup – Startup Options (XP)
8
The Ready to Install dialog displays the Install Folder location and the Shortcut Folder name that will be used to install the MOTOMESH software. Click on the Next button to proceed with the installation process.
6881011Y52-D January 2007
2-2
MOTOMESH 1.2 Wireless Modem Card Users Guide
Figure 2-3 MOTOMESH Setup - Ready to Install (XP)
9
If MOTOMESH has been previously installed on your computer, the Information dialog box will be displayed as shown in
Figure 2-4.
Select the Uninstall button to remove the existing MOTOMESH drivers and continue the installation process. If you choose not to continue, click the Cancel button.
Figure 2-4 MOTOMESH Setup - Previously Installed Software Detected (XP)
6881011Y52-D January 2007
2-3
Chapter 2: Software Installation
10
If you choose to continue with the installation, the Removing Programs From Your Computer dialog will be displayed to indicate the progress of the uninstall operation.
When the operation has completed, click on the Close button to dismiss the dialog.
Figure 2-5 MOTOMESH Setup - Uninstalling Software (XP)
11
The Installing Files window will be automatically dismissed as soon as file installation has completed.
Figure 2-6 MOTOMESH Setup - Installing Files Window (XP)
12
The Performing Setup Actions dialog displays a status bar to indicate the progress of the installation.
6881011Y52-D January 2007
2-4
MOTOMESH 1.2 Wireless Modem Card Users Guide
13
14
A Software Installation dialog indicates that the software is not Windows Logo tested, select the Continue Anyway button to complete the installation process.
Figure 2-7 Software Installation Dialog Box
If a second Software Installation dialog box is displayed as shown in Figure 2-8. Click on the Continue Anyway button to complete the installation process.
15
Figure 2-8 Software Installation Dialog Box
Select the Continue Anyway button if additional windows display on the screen containing the same screen contents as in the step above.
6881011Y52-D January 2007
2-5
Chapter 2: Software Installation
16
The Select Options dialog box will be displayed as shown in Figure 2-9. This installation screen allows the user to view the ReadMe file during the installation and to run MeshTray immediately following installation. Click on the Next button to proceed with the installation process.
Figure 2-9 Software Installation Dialog Box – Select Options
17
If selected, the ReadMe file will be displayed. Review the contents of the file and then dismiss the dialog box by clicking on the X located in the upper right corner of the dialog.
You MUST close the ReadMe file to complete the installation.
18
From the MOTOMESH Installed Successfully dialog click on the Finish button to exit.
Be sure to close the ReadMe file (if you elected to view it in the earlier steps), otherwise the dialog shown below will not be displayed.
Figure 2-10 MOTOMESH Setup - MOTOMESH Installed Successfully (XP)
6881011Y52-D January 2007
2-6
MOTOMESH 1.2 Wireless Modem Card Users Guide
Installing MOTOMESH Client Software on Windows 2000
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. .
The following procedure outlines the installation of MOTOMESH client software on a typical Windows 2000 platform. Some of the steps may vary slightly based on the configuration of an individual computer.
Complete the following procedure to install the MOTOMESH client software:
Procedure 2-2 MOTOMESH Client Software Installation on Windows 2000
1
Close and exit any existing MOTOMESH applications running on the computer prior to installation.
2
3
4
Insert the MOTOMESH Software and Documentation CD into the CD-ROM drive. The installation should begin automatically.
If the installation program does not start automatically, select Start | Run then type
d:\setupmotomeshclient.exe (where d: specifies the CD-ROM drive)
Click the OK button.
The MOTOMESH Setup program will be displayed as shown in Figure 2-11, select the Next button to continue the installation process.
Figure 2-11 MOTOMESH Setup - Installer Setup Dialog Box (W2K))
6881011Y52-D January 2007
2-7
Loading...
+ 49 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use