Zebra Technologies TC83BH User Manual

TC8300

LASER LIGHT - DO NOT STARE INTO BEAM. CLASS 2 LASER PRODUCT.

LASERLICHT - NICHT IN DEN STRAHL BLICKEN. LASER KLASSE 2. LUMIÉRE

LASER - NE PAS REGARDER DANS LE FAISCEAU. APPAREIL À LASER DE

CLASSE 2

. 630-680nm, 1mW

CAUTION- CLASS 2 LASER LIGHT WHEN OPEN. DO NOT STARE INTO THE BEAM. ATTENTION-LUMIÉRE

LASER DE CLASSE 2 EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU. VORSICHT-

LASERLICHT KLASSE 2 WENN ABDECKUNG GEÖFFNET. NICHT IN DEN STRAHL BLICKEN.

COMPLIES WITH 21CFR1040.10 & 1040.11 EXCEPT FOR DEVIATIONS PURSUANT TO LASER

NOTICE NO. 50, DATED JUNE 24, 2007 AND IEC/EN 60825-1:2014.

◰ݹ䗀ሴⴤ㿶ݹᶏ2㊫◰ݹӗ૱

⌘᜿˖ᢃᔰᰦ৺㚄䬱ཡ᭸ᰦᴹ2㊫◰ݹ䗀ሴⴤ㿶ݹᶏ

2

3

1

Standard

DPM

12

3

Regulatory
Guide

MN-003364-01 Rev.A 03/19

Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA

www.zebra.com

ZEBRA and the stylized Zebra head are trademarks of Zebra
Technologies Corporation, registered in many jurisdictions worldwide.
All other trademarks are the property of their respective owners. ©2019
Zebra Technologies Corporation and/or its affiliates. All rights reserved.

Warranty

For the complete Zebra hardware product
warranty statement, go to: zebra.com/warranty.

Service Information

Before you use the unit, it must be configured to
operate in your facility’s network and run your
applications.

If you have a problem running your unit or using
your equipment, contact your facility’s Technical
or Systems Support. If there is a problem with
the equipment, they will contact the Zebra Global
Customer Support at zebra.com/support.

For the latest version of this guide go to:
zebra.com/support.

Software Support

Zebra wants to ensure that customers have the
latest entitled software at the time of device
purchase in order to keep the device operating at
peak performance levels. To confirm that your
Zebra device has the latest entitled software
available at the time of purchase, visit

zebra.com/support.

Check for the latest software from Support >
Products, or search for the device and select
Support > Software Downloads.

If your device does not have the latest entitled
software as of your device purchase date, e-mail
Zebra at [e-mail] and
ensure you include the following essential device
information:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are
requesting.

If it is determined by Zebra that your device is
entitled to the latest version of software, as of the
date you purchased your device, you will receive
an e-mail containing a link directing you to a
Zebra Web site to download the appropriate
software.

Regulatory Information

This device is approved under Zebra Technologies
Corporation.

This guide applies to the following model numbers:
TC83B0 and TC83BH.

All Zebra devices are designed to be compliant with
the rules and regulations in locations they are sold
and will be labeled as required.

Local language translations are available at the
following website: zebra.com/support

Any changes or modifications to Zebra equipment,
not expressly approved by Zebra, could void the
user’s authority to operate the equipment.

Declared maximum operating temperature: 50°C.

CAUTION:

Only use Zebra approved and UL Listed accessories,
battery packs and battery chargers.

Do NOT attempt to charge damp/wet mobile comput
ers or batteries. All components must be dry before
connecting to an external power source.

.

Bluetooth® Wireless
Technology

This is an approved Bluetooth® product. For more
information or to view the End Product Listing,
please visit bluetooth.org/tpg/listings.cfm

.

Wireless Device Country
Approvals

Regulatory markings subject to certification are
applied to the device signifying the radio(s) is/are
approved for use in the following countries and
continents: United States, Canada, Japan, China,
South Korea, Australia, and Europe.

Please refer to the Declaration of Conformity (DoC)
for details of other country markings. This is
available at: zebra.com/doc

Note: Europe includes Austria, Belgium, Bulgaria,
Croatia, Czech Republic, Cyprus, Denmark,
Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania,
Slovak Republic, Slovenia, Spain, Sweden,
Switzerland, and the United Kingdom.

CAUTION: Operation of the device without regulatory

approval is illegal.

.

Country Roaming

This device incorporates the International Roaming
feature (IEEE802.11d), which will ensure the
product operates on the correct channels for the
particular country of use.

Wi-Fi Direct

Operation is limited to the following channels/bands
as supported in the country of use:

• Channels 1 - 11 (2412 - 2462 MHz)

• Channels 36 - 48 (5150 - 5250 MHz)

• Channels 149 - 165 (5745 - 5825 MHz)

Frequency of Operation – FCC
and IC

5 GHz Only

Industry Canada Statement

CAUTION: The device for the band 5,150 - 5,250 MHz

is only for indoor usage to reduce potential for harmful
interference to co-Channel mobile satellite systems.
High power radars are allocated as primary users
(meaning they have priority) of 5,250 - 5,350 MHz and
5,650 - 5,850 MHz and these radars could cause in
terference and/or damage to LE-LAN devices.

AVERTISSEMENT: Le dispositive fonctionnant dans la

bande 5,150 - 5,250 MHz est réservé uniquement
pour une utilisation à l'intérieur afin de réduire les
risques de brouillage préjudiciable aux systèmes de
satellites mobiles utilisant les mêmes canaux. Les
utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu'ils ont la
priorité) pour les bands 5,250 - 5,350 MHz et 5,650 ­5,850 MHz et que ces radars pourraient causer du
brouillage et/ou des dommages aux dispositifs LAN­EL.

2.4 GHz Only

The available channels for 802.11 operation in the
US are Channels 1 to 11. The range of channels is
limited by firmware.

Health and Safety
Recommendations

Ergonomic Recommendations

CAUTION: In order to avoid or minimize the potential

risk of ergonomic injury follow the recommendations
below. Consult with your local Health & Safety Man
ager to ensure that you are adhering to your compa
ny's safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within
easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

-

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Vehicle Installation

RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles (including safety systems). Check with the
manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer
about any equipment that has been added to your
vehicle.

An air bag inflates with great force. DO NOT place
objects, including either installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. If in-vehicle
wireless equipment is improperly installed and the
air bag inflates, serious injury could result.

Position the device within easy reach. Be able to
access the device without removing your eyes from
the road.

NOTE: Connection to an alert device that will

cause a vehicle horn to sound or lights to flash
on receipt of a call on public roads is not
permitted.

IMPORTANT: Before installing or using, check

state and local laws regarding windshield
mounting and use of equipment.

For Safe Installation

• Do not put your phone in a location that
obstructs the drivers vision or interferes with
the operation of the Vehicle.

• Do not cover an airbag.

Safety on the Road

Do not take notes or use the device while driving.
Jotting down a “to do” list or flipping through your
address book takes attention away from your
primary responsibility, driving safely.

When driving a car, driving is your first
responsibility - Give full attention to driving. Check
the laws and regulations on the use of wireless
devices in the areas where you drive. Always obey
them.

When using a wireless device behind the wheel of
a car, practice good common sense and remember
the following tips:

1. Get to know your wireless device and any

features such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.

2. When available, use a hands free device.

3. Let the person you are speaking with know you

-

are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice, and even heavy traffic
can be hazardous.

4. Dial sensibly and assess the traffic; if possible,

place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.

5. Do not engage in stressful or emotional

conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations that have
the potential to divert your attention from the
road.

6. Use your wireless phone to call for help. Dial

the Emergency services, (9-1-1 in the US, and

1-1-2 in Europe) or other local emergency
number in the case of fire, traffic accident or
medical emergencies. Remember, it is a free
call on your wireless phone! The call can be
made regardless of any security codes and
depending on a network, with or without a SIM

-

-

card inserted.

7. Use your wireless phone to help others in

emergencies. If you see an auto accident, crime
in progress or other serious emergency where
lives are in danger, call the Emergency
Services, (9-1-1 in the US, and 1-1-2 in Europe)
or other local emergency number, as you would
want others to do for you.

8. Call roadside assistance or a special non-

emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic
signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be
stolen, call roadside assistance or other special
non-emergency wireless number.

“The wireless industry reminds you to use your
device / phone safely when driving”.

Warnings for Use of Wireless
Devices

CAUTION: Please observe all warning notices with re

gard to the usage of wireless devices.

Potentially Hazardous
Atmospheres – Vehicles Use

You are reminded of the need to observe
restrictions on the use of radio devices in fuel
depots, chemical plants etc. and areas where the air
contains chemicals or particles (such as grain, dust,
or metal powders) and any other area where you
would normally be advised to turn off your vehicle
engine.

Safety in Aircraft

Switch off your wireless device whenever you are
instructed to do so by airport or airline staff. If your
device offers a ‘flight mode’ or similar feature,
consult airline staff as to its use in flight.

Safety in Hospitals

Wireless devices transmit radio frequency energy
and may affect medical electrical equipment.

Wireless devices should be switched off wherever
you are requested to do so in hospitals, clinics or
healthcare facilities. These requests are designed to
prevent possible interference with sensitive medical
equipment.

Pacemakers

Pacemaker manufacturers recommended that a
minimum of 15 cm (6 inches) be maintained
between a handheld wireless device and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with independent research and recommendations
by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15
cm (6 inches) from their pacemaker when
turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker
to minimize the potential for interference.

• If you have any reason to suspect that
interference is taking place, turn OFF your
device.

Other Medical Devices

Please consult your physician or the manufacturer
of the medical device, to determine if the operation
of your wireless product may interfere with the
medical device.

RF Exposure Guidelines

Safety Information

Reducing RF Exposure - Use Properly

Only operate the device in accordance with the
instructions supplied.

International

The device complies with internationally recognized
standards covering human exposure to
electromagnetic fields from radio devices. For
information on “International” human exposure to
electromagnetic fields refer to the Zebra
Declaration of Conformity (DoC) at: zebra.com/doc

For further information on the safety of RF energy
from wireless devices - see zebra.com/

responsibility located under Corporate

Responsibility.

Europe

Handheld Devices

This device was tested for typical body worn
operation. Use only Zebra tested and approved
belt-clips, holsters, and similar accessories to
ensure EU Compliance.

US and Canada

Co-located Statement

To comply with FCC RF exposure compliance
requirement, the antenna used for this transmitter
must not be co-located or operating in conjunction
with any other transmitter/antenna except those
already approved in this filling.

-

Handheld Devices

This device was tested for typical body worn
operation. Use only Zebra tested and approved
belt-clips, holsters, and similar accessories to
ensure FCC Compliance. The use of third-party
belt-clips, holsters, and similar accessories may not
comply with FCC RF exposure compliance
requirements, and should be avoided.

Laser Devices

Class 2 laser scanners use a low power, visible
light diode. As with any very bright light source
such as the sun, the user should avoid staring
directly into the light beam. Momentary exposure to
a Class 2 laser is not known to be harmful.

CAUTION:

mance of procedures other than those specified herein
may result in hazardous laser light exposure.

Use of controls, adjustments, or the perfor

Scanner Labeling

Labels Read

1. Laser Light - do not stare into beam Class 2

Laser product.

2. Caution - Class 2 laser light when open. Do not

stare into the beam.

3. (Standard) Complies with 21 CFR1040.10 and

1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007,
AND IEC 60825-1 (Ed.2.0), EN 60825-1:2007
AND IEC/EN 60825-1:2014.

(DPM) Complies with 21 CFR1040.10 and

1040.11 except for deviations pursuant to
Laser Notice No. 50, dated June 24, 2007 AND
IEC/EN 60825-1:2014.

LED Devices

Classified as ‘EXEMPT RISK GROUP’ according to
IEC 62471:2006 and EN 62471:2008.

Pulse duration: SE4750: 1.7ms

Power Supply

Use ONLY a Zebra approved Nationally
Recognized Test Laboratory (NRTL) Certified ITE
(LPS/SELV) power supply with electrical ratings:
Output 5.4 VDC, min 3 A, with a maximum ambient

temperature of at least +50°C. Use of alternative
power supply will invalidate any approvals given to
this unit and may be dangerous.

Batteries

.

Taiwan - Recycling

EPA
(Environmental
Protection
Administration)
requires dry
battery producing
or importing firms in accordance with Article 15 of
the Waste Disposal Act are required to indicate the
recycling marks on the batteries used in sales,
giveaway or promotion. Contact a qualified
Taiwanese recycler for proper battery disposal.

Battery Information

CAUTION: Risk of explosion if battery is replaced by

an incorrect type. Dispose of batteries according to
instructions.

Use only Zebra approved batteries. Accessories
which have battery charging capability are
approved for use with the following battery models:

• Model 82-176054-01(4.2 VDC, 6700 mAh)

• Model BT-000380 (4.2 VDC, 7000 mAh).
Zebra approved rechargeable battery packs are

designed and constructed to the highest standards
within the industry.

However, there are limitations to how long a battery
can operate or be stored before needing
replacement. Many factors affect the actual life
cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.

When batteries are stored over six (6) months,
some irreversible deterioration in overall battery
quality may occur. Store batteries at half of full
charge in a dry, cool place, removed from the
equipment to prevent loss of capacity, rusting of
metallic parts and electrolyte leakage. When
storing batteries for one year or longer, the charge
level should be verified at least once a year and
charged to half of full charge.

-

Replace the battery when a significant loss of run
time is detected.

Standard warranty period for all Zebra batteries is
one year, regardless if the battery was purchased
separately or included as part of the mobile
computer or bar code scanner. For more
information on Zebra batteries, please visit:

zebra.com/batterybasics

Battery Safety Guidelines

The area in which the units are charged should be
clear of debris and combustible materials or
chemicals. Particular care should be taken where
the device is charged in a non-commercial
environment.

• Follow battery usage, storage, and charging
guidelines found in the user's guide.

• Improper battery use may result in a fire,
explosion, or other hazard.

• To charge the mobile device battery, the
battery and charger temperatures must be
between +32°F and +113°F (0°C and +45°C).

• Do not use incompatible batteries and
chargers. Use of an incompatible battery or
charger may present a risk of fire, explosion,
leakage, or other hazard. If you have any
questions about the compatibility of a battery or
a charger, contact Zebra support.

Radio Frequency Interference
Requirements-FCC

Note: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:

.

• Reorient or relocate the receiving antenna

合 格 证

• Increase the separation between the
equipment and receiver

• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected

• Consult the dealer or an experienced radio/TV
technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.

Radio Frequency Interference
Requirements - Canada

Innovation, Science and Economic Development
Canada ICES-003 Compliance Label: ICES-3 (B)/
NMB-3(B)

Radio Transmitters

This device complies with Industry Canada's
licence-exempt RSSs. Operation is subject to the
following two conditions: (1) This device may not
cause interference; and (2) This device must
accept any interference, including interference that
may cause undesired operation of the device.

Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radio
électrique subi même si le brouillage est
susceptible d'en compromettre le fonctionnement.

For RLAN Devices:
The use of 5 GHz RLAN in Canada has the

following restriction:

• Restricted Band 5.60 - 5.65 GHz

Pour les équipements RLAN:
L'utilisation de la bande RLAN 5 GHz au Canada

présente les limitations suivantes :

• "Bande restreinte 5.60 - 5.65 GHz

Label Marking: The Term 'IC:' before the radio
certification only signifies that Industry Canada
technical specifications were met.

Etiquette de marquage: Le terme "IC" avant la
certification radio signifie que le produit est
compatible avec le spécification Industrie Canada

Marking and
European Economic

Area (EEA)

The use of 5 GHz RLAN throughout the EEA has
the following restrictions:

• 5.15 - 5.35 GHz is restricted to indoor use only.

Statement of Compliance

Zebra hereby declares that this radio equipment is
in compliance with Directives 2014/53/EU and
2011/65/EU.

The full text of the EU Declaration of Conformity is
available at the following internet address:
zebra.com/doc.

Japan (VCCI) - Voluntary
Control Council for Interference
Class B ITE

この装置は、クラス B 情報技術装置です。この
装置は、家庭環境で使用することを目的として
いますが、この装置がラジオやテレビジョ ン受
信機に近接して使用されると、受信障害を引き
起こすことがあり ます。 取扱説明書に従って正
しい取り扱いをして下さ
い。 VCCI-B

Korea Warning Statement for

Class B ITE

기 종 별 사 용 자 안 내 문
B급 기기

( 가정용
방송통신기자
재)

이 기기는 가정용 (B 급 )
전자파적합기기로서 주로
가정에서 사용하는 것을
목적으로 하며 , 모든
지역에서 사용할 수
있습니다 .

Other Countries

Australia

The use of 5 GHz RLAN in Australia is restricted in
the following band 5.60 – 5.65 GHz.

Brazil

Declarações Regulamentares para TC83B0/
TC83BH - Brasil

Nota: A marca de certificação se aplica ao
Transceptor, mod TC83B0/TC83BH. Este
equipamento não tem direito à proteção contra
interferência prejudicial e não pode causar
interferência em Sistemas devidamente
autorizados.

Para maiores informações sobre ANATEL consulte
o site: www.anatel.gov.br.

Este produto está homologado pela Anatel, de
acordo com os procedimentos regulamentados
pela Resolução n°242/2000 e atende aos
requisitos técnicos aplicados, incluindo os limites
de exposição da Taxa de Absorção Específica
referente a campos elétricos, magnéticos e
eletromagnéticos de radiofrequência, de acordo
com as Resoluções n° 303/2002 e 533/2009.

“Este dispositivo está em conformidade com as
diretrizes de exposição à radiofrequência quando
posicionado pelo menos a 1.8 centímetros de
distância do corpo.”

Chile

Conforme a Resolución 755 parte j.1), se ajustará
el dispositivo a operar en interiores en las
siguientes bandas con una potencia máxima
radiada no superior a 150mW:

• 2.400 a 2.483,5 MHz

• 5.150 a 5.250MHz

• 5.250 a 5.350MHz

• 5.470 a 5.725MHz

• 5.725 a 5.850MHz
Además, de acuerdo con Resolución 755, para la

banda 5150-5250MHz la operación del equipo
estará restringida al interior de inmuebles y la
densidad de potencia radiada máxima no supera
7,5mW/MHz en cualquier banda de 1MHz y

0.1875mW/25kHz en cualquier banda de 25kHz.
Para la tecnología NFC en la banda 13.553 a

13.567 kHz, la intensidad de campo eléctrico no
excederá 20 mV/m a 30 metros, conforme a
Resolucion 755 parte Art 1. e).

China

通过访问以下网址可下载当地语言支持的产品说明
书

zebra.com/support

锂电池安全警示语 :
警告： 请勿拆装，短路，撞击，挤压或者投入火中
注意： 如果电池被不正确型号替换，或出现鼓胀，

会存在爆炸及其他危险
请按说明处置使用过的电池
电池浸水后严禁使用

Eurasian Customs Union

Данный продукт соответствует требованиям
знака EAC.

Hong Kong

In accordance with HKTA1039, the band 5.15GHz -

5.35GHz is for indoor operation only.

Mexico

La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.

South Korea

해당 무선설비는 운용 중 전파혼신 가능성이 있음
해당 무선설비는 전파혼신 가능성이 있으므로

인명안전과 관련된 서비스는 할 수 없습니다

Taiwan

臺灣
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公

司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性及功能。

第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合

法通信；經發現有干擾現象時，應立即停用，並改
善至無干擾時方得繼續使用。

前項合法通信，指依電信法規定作業之無線電通
信。

低功率射頻電機須忍受合法通信或工業、科學及醫
療用電波輻射性電機設備之干擾。

應避免影響附近雷達系統之操作
公司資訊
台灣斑馬科技股份有限公司 / 台北市信義區松高路 9

號13樓

Turkey

Bu cihaz Türkçe karakterlerin tamamını ihtiva eden
ETSI TS 123.038 V8.0.0 (veya sonraki
sürümünkodu) ve ETSI TS 123.040 V8.1.0 (veya
sonraki sürümün kodu) teknik özelliklerine
uygundur.

Ukraine

Дане обладнання відповідає вимогам технічного
регламенту № 1057, 2008 на обмеження щодо
використання деяких небезпечних речовин в
електричних та електронних пристроях.

Thailand

เครื่ องโทรคมนาคมและอุ ปกรณ นี้
มี ความสอดคล องตามข อกําหนดของ กทช .

Waste Electrical and
Electronic Equipment
(WEEE)

English: For EU Customers: All products at the

end of their life must be returned to Zebra for
recycling. For information on how to return product,
please go to: zebra.com/weee

Français: Clients de l'Union Européenne: Tous les
produits en fin de cycle de vie doivent être
retournés à Zebra pour recyclage. Pour de plus
amples informations sur le retour de produits,
consultez : zebra.com/weee

Español: Para clientes en la Unión Europea: todos
los productos deberán entregarse a Zebra al final
de su ciclo de vida para que sean reciclados. Si
desea más información sobre cómo devolver un
producto, visite: zebra.com/weee

Bulgarish: За клиенти от ЕС: След края на
полезния им живот всички продукти трябва да

.

.

.

се връщат на Zebra за рециклиране. За
информация относно връщането на продукти,
моля отидете на адрес: zebra.com/weee

.

Deutsch: Für Kunden innerhalb der EU: Alle
Produkte müssen am Ende ihrer Lebensdauer zum
Recycling an Zebra zurückgesandt werden.
Informationen zur Rücksendung von Produkten
finden Sie unter zebra.com/weee

.

Italiano: per i clienti dell'UE: tutti i prodotti che sono
giunti al termine del rispettivo ciclo di vita devono
essere restituiti a Zebra al fine di consentirne il
riciclaggio. Per informazioni sulle modalità di
restituzione, visitare il seguente sito Web:

zebra.com/weee

.

Português: Para clientes da UE: todos os
produtos no fim de vida devem ser devolvidos à
Zebra para reciclagem. Para obter informações
sobre como devolver o produto, visite: zebra.com/

weee.

Nederlands: Voor klanten in de EU: alle producten
dienen aan het einde van hun levensduur naar
Zebra te worden teruggezonden voor recycling.
Raadpleeg zebra.com/weee

voor meer informatie

over het terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej:

Produkty wycofane z eksploatacji należy zwrócić
do firmy Zebra w celu ich utylizacji. Informacje na
temat zwrotu produktów znajdują się na stronie
internetowej zebra.com/weee

.

Čeština: Pro zákazníky z EU: Všechny produkty je
nutné po skonèení jejich životnosti vrátit
spoleènosti Zebra k recyklaci. Informace o zpùsobu
vrácení produktu najdete na webové stránce:

zebra.com/weee

.

Eesti: EL klientidele: kõik tooted tuleb nende eluea
lõppedes tagastada taaskasutamise eesmärgil
Zebra'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi:

zebra.com/weee

.

Magyar: Az EU-ban vásárlóknak: Minden
tönkrement terméket a Zebra vállalathoz kell
eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a zebra.com/weee
weboldalra.

Svenska: För kunder inom EU: Alla produkter som
uppnått sin livslängd måste returneras till Zebra för
återvinning. Information om hur du returnerar
produkten finns på zebra.com/weee

.

Suomi: Asiakkaat Euroopan unionin alueella:
Kaikki tuotteet on palautettava kierrätettäväksi
Zebra-yhtiöön, kun tuotetta ei enää käytetä.
Lisätietoja tuotteen palauttamisesta on osoitteessa

zebra.com/weee

.

Dansk: Til kunder i EU: Alle produkter skal
returneres til Zebra til recirkulering, når de er
udtjent. Læs oplysningerne om returnering af
produkter på: zebra.com/weee

.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα,
στο τέλος της διάρκειας ζωής τους, πρέπει να
επιστρέφονται στην Zebra για ανακύκλωση. Για
περισσότερες πληροφορίες σχετικά με την
επιστροφή ενός προϊόντος, επισκεφθείτε τη
διεύθυνση zebra.com/weee

στο Διαδίκτυο.

Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu
waslu fl-aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu
rritornati għand Zebra għar-riċiklaġġ. Għal aktar
tagħrif dwar kif għandek tirritorna l-prodott, jekk
jogħġbok żur: zebra.com/weee

.

Românesc: Pentru clienţii din UE: Toate
produsele, la sfârşitul duratei lor de funcţionare,
trebuie returnate la Zebra pentru reciclare. Pentru
informaţii despre returnarea produsului, accesaţi:

zebra.com/weee

.

Slovenski: Za kupce v EU: vsi izdelki se morajo po
poteku življenjske dobe vrniti podjetju Zebra za
reciklažo. Za informacije o vračilu izdelka obiščite:

zebra.com/weee

.

Slovenčina: Pre zákazníkov z krajín EU: Všetky
výrobky musia byť po uplynutí doby ich životnosti
vrátené spoločnosti Zebra na recykláciu. Bližšie
informácie o vrátení výrobkov nájdete na:

zebra.com/weee

.

Lietuvių: ES vartotojams: visi gaminiai, pasibaigus
jų eksploatacijos laikui, turi būti grąžinti utilizuoti į
kompaniją „Zebra“. Daugiau informacijos, kaip
grąžinti gaminį, rasite: zebra.com/weee

.

Latviešu: ES klientiem: visi produkti pēc to
kalpošanas mūža beigām ir jānogādā atpakaļ

Zebra otrreizējai pārstrādei. Lai iegūtu informāciju
par produktu nogādāšanu Zebra, lūdzu, skatiet:

zebra.com/weee

.

Türkçe: AB Müşterileri için: Kullanım süresi dolan
tüm ürünler geri dönüştürme için Zebra'ya iade
edilmelidir. Ürünlerin nasıl iade edileceği hakkında
bilgi için lütfen şu adresi ziyaret edin: zebra.com/

weee.

Turkish WEEE Statement
of Compliance

EEE Yönetmeliğine Uygundur.

End User License
Agreement

For complete EULA information, go to

www.zebra.com/eula

.

CMM Disclosure

部件名称

(Parts)

铅

(Pb)汞(Hg)镉(Cd)

金属部件

(Metal Parts)

电路模块

(Circuit Modules)

电缆及电缆组件

(Cables and Cable
Assemblies)

塑料和聚合物部
件

(Plastic and
Polymeric Parts)

光学和光学组件

(Optics and Optical
Components)

电池

(Batteries)

OOO O O O

XOO O O O

OOO O O O

OOO O O O

OOO O O O

OOO O O O

本表格依据 SJ/T 11364 的规定编制。

O: 表示该有害物质在该部件所有均质材料中的含

量均在 GB/T 26572 规定的限量要求以下。

X: 表示该有害物质至少在该部件的某一均质材料

中的含量超出 GB/T 26572 规定的限量要求。(
企业可在此处，根据实际情况对上表中打 “×”
的技术原因进行进一步说明。）

This table was created to comply with China
RoHS requirements.

限用物質含有情況標示聲明書

設備名稱： 移動式電腦

Equipment name

單元

Unit

印刷電路板及電子組件 O O O O O O
金屬零件 _ O O O O O
電纜及電纜組件 O O O O O O
塑料和聚合物零件 O O O O O O
光學與光學元件 O O O O O O

備考 1. 〝超出0.1 wt % 〞及〝超出 0.01 wt % 〞係指限用
物質之百分比含量超出百分比含量基準值。

Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%”
indicate that the percentage content of the restricted
substance exceeds the reference percentage value of
presence condition.

備考 2. 〝○ 〞係指該項限用物質之百分比含量未超出百分
比含量基準值。

Note 2: “ ○ ” indicates that the percentage content of the
restricted substance does not exceed the percentage of
reference value of presence.

備考 3. 〝−〞係指該項限用物質為排除項目。
Note 3: The “−” indicates that the restricted substance

corresponds to the exemption.

有害物质

六价铬

多溴联苯

(PBB)

)

+6

(Cr

六價鉻

多溴二苯醚

(PBDE)

(PBB)

多溴聯苯

(Cr(VI))

型號 （型式）： TC83B0
Type designation (Type)

限用物質及其化學符號

Restricted substances and its

chemical symbols

鉛 (Pb)

汞 (Hg)

鎘 (Cd)

多溴二苯醚

限用物質含有情況標示聲明書

設備名稱： 移動式電腦

Equipment name

單元

Unit

印刷電路板及電子組件 O O O O O O
金屬零件 _ O O O O O
電纜及電纜組件 O O O O O O
塑料和聚合物零件 O O O O O O
光學與光學元件 O O O O O O

備考 1. 〝超出0.1 wt % 〞及〝超出 0.01 wt % 〞係指限用
物質之百分比含量超出百分比含量基準值。

Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%”
indicate that the percentage content of the restricted
substance exceeds the reference percentage value of
presence condition.

備考 2. 〝○ 〞係指該項限用物質之百分比含量未超出百分
比含量基準值。

Note 2: “ ○ ” indicates that the percentage content of the
restricted substance does not exceed the percentage of
reference value of presence.

備考 3. 〝−〞係指該項限用物質為排除項目。
Note 3: The “−” indicates that the restricted substance

corresponds to the exemption.

(PBDE)

型號 （型式）： TC83BH
Type designation (Type)

限用物質及其化學符號

Restricted substances and its

chemical symbols

鉛 (Pb)

六價鉻

汞 (Hg)

鎘 (Cd)

)

+6

(Cr

(PBB)

多溴二苯醚

(PBDE)

多溴聯苯