Zebra Technologies TC56CJ User Manual
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL USA
http://www.zebra.com
Zebra and the stylized Zebra head are trademarks of
ZIH Corp., registered in many jurisdictions worldwide.
All other trademarks are the property of their
respective owners.
© 2016 Symbol Technologies LLC, a subsidiary of
Zebra Technologies Corporation. All rights reserved.
Touch Computer
Zebra reserves the right to make changes to any
product to improve reliability, function, or design.
Zebra does not assume any product liability arising
out of, or in connection with, the application or use of
any product, circuit, or application described herein.
No license is granted, either expressly or by
implication, estoppel, or otherwise under any patent
right or patent, covering or relating to any
combination, system, apparatus, machine, material,
method, or process in which Zebra products might be
used. An implied license exists only for equipment,
circuits, and subsystems contained in Zebra products.
TC56
Regulatory Guide
MN-002957-01 Revision A — January 2017
Additional Information
For information on using the TC56, refer to the TC56 User Guide available at: http://www.zebra.com/support.
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to model numbers: TC56CJ, TC56DJ.
All Zebra devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
Local language translations are available at the following website: www.zebra.com/support.
Any changes or modifications to Zebra equipment, not expressly approved by Zebra, could void the user’s authority to operate the equipment.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the
performance or reliability of the Global Positioning
System (GPS) hardware, operating software, or other
aspects of this product. UL has only tested for fire,
shock, or casualties as outlined in UL's Standard(s) for
Safety for Information Technology Equipment,
UL60950-1. UL Certification does not cover the
performance or reliability of the GPS hardware and
GPS operating software. UL makes no representations,
warranties, or certifications whatsoever regarding the
performance or reliability of any GPS related functions
of this product.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information or to view the End Product Listing, please visit https://www.bluetooth.org/tpg/listings.cfm.
Wireless Device Country Approvals
Regulatory markings subject to certification are applied to the device signifying the radio(s) is/are approved for use in the following countries and continents: United States, Canada, Japan, China, South Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for details of other country markings. This is available at: http://www.zebra.com/doc.
Note: Europe includes Austria, Belgium, Bulgaria,
Croatia, Czech Republic, Cyprus, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland, and the United Kingdom.
Country Selection
Select only the country in which the device will be used. Any other selection will make the operation of this device illegal.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d), which will ensure the product operates on the correct channels for the particular country of use.
Wi-Fi Direct / Hotspot
Operation is limited to the following channels/bands as supported in the country of use:
• Channels 1 - 11 (2412 - 2462 MHz)
• Channels 36 - 48 (5150 - 5250 MHz)
• Channels 149 - 165 (5745 - 5825 MHz)
Frequency of Operation – IC
5 GHz Only
Industry Canada Statement
2.4 GHz Only
The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware.
Health and Safety Recommendations
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy
reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles (including
safety systems). Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer about any equipment that has
been added to your vehicle.
An air bag inflates with great force. DO NOT place objects,
including either installed or portable wireless equipment, in
the area over the air bag or in the air bag deployment area.
If in-vehicle wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Position the device within easy reach. Be able to access the device without removing your eyes from the road.
For Safe installation
• Do not put your phone in a location that obstructs
the drivers vision or interferes with the operation of
the Vehicle.
• Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility Give full attention to driving. Check the laws and
regulations on the use of wireless devices in the areas
where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good common sense and remember the following tips:
1. Get to know your wireless device and any features
such as speed dial and redial. If available, these
features help you to place your call without taking
your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic
or hazardous weather conditions. Rain, sleet, snow,
ice, and even heavy traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be
stationary. If you need to make a call while moving,
dial only a few numbers, check the road and your
mirrors, then continue.
5. Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and
suspend conversations that have the potential to
divert your attention from the road.
6. Use your wireless phone to call for help. Dial the
Emergency services, (9-1-1 in the US, and 1-1-2 in
Europe) or other local emergency number in the
case of fire, traffic accident or medical emergencies.
Remember, it is a free call on your wireless phone!
The call can be made regardless of any security
codes and depending on a network, with or without a
SIM card inserted.
7. Use your wireless phone to help others in
emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives
are in danger, call the Emergency Services, (9-1-1 in
the US, and 1-1-2 in Europe) or other local
emergency number, as you would want others to do
for you.
8. Call roadside assistance or a special nonemergency wireless assistance number when
necessary. If you see a broken-down vehicle posing
no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured, or a
vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless
number.
“The wireless industry reminds you to use your device / phone safely when driving”.
Warnings for Use of Wireless Devices
Potentially Hazardous Atmospheres – Vehicles Use
You are reminded of the need to observe restrictions on
the use of radio devices in fuel depots, chemical plants
etc. and areas where the air contains chemicals or
particles (such as grain, dust, or metal powders) and
any other area where you would normally be advised to
turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your device offers a ‘flight mode’ or similar feature, consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or healthcare facilities. These requests are designed to prevent possible interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a
minimum of 15 cm (6 inches) be maintained between a
handheld wireless device and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with independent
research and recommendations by Wireless
Technology Research.
Persons with Pacemakers:
• Should ALWAYS keep the device more than 15cm (6
inches) from their pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to
minimise the potential for interference.
• If you have any reason to suspect that interference
is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the operation of your wireless product may interfere with the medical device.
RF Exposure Guidelines
Reducing RF Exposure – Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized
standards covering human exposure to
electromagnetic fields from radio devices. For
information on 'International' human exposure to
electromagnetic fields, refer to the Zebra Declaration of
Conformity (DoC) at http://www.zebra.com/doc.
For further information on the safety of RF energy from
wireless devices, see https://www.zebra.com/us/en/
about-zebra/company-information/corporateresponsibility.html located under Corporate
Responsibility.
Europe
This device was tested for typical body worn operation. Use only Zebra tested and approved belt clips, holsters, and similar accessories to ensure EU Compliance.
US and Canada
This device was tested for typical body worn operation.
Use only Zebra tested and approved belt-clips,
holsters, and similar accessories, always follow the
instruction for use as detailed in the accessory User
Guide, to ensure FCC Compliance. The use of thirdparty belt clips, holsters, and similar accessories may
not comply with FCC RF exposure compliance
requirements, and should be avoided. The FCC has
granted an Equipment Authorization for these model
phones with all reported SAR levels evaluated as in
compliance with the FCC RF emission guidelines. SAR
information on these model phones is on file with the
FCC and can be found under the Display Grant section
of http://www.fcc.gov/oet/ea/fccid.
Co-located statement
To comply with FCC RF exposure compliance
requirement, the antenna used for this transmitter must
not be co-located or operating in conjunction with any
other transmitter/antenna except those already
approved in this filling.
LED Devices
Classified as 'EXEMPT RISK GROUP' according to IEC 62471:2006 and EN 62471:2008.
Power Supply
Use ONLY a Zebra approved UL LISTED ITE (IEC/EN
60950-1, LPS/SELV) power supply with electrical
ratings: Output 5 VDC, min 1.2 A, with a maximum
ambient temperature of at least 50°C. Use of
alternative power supply will invalidate any approvals
given to this unit and may be dangerous.
Power Supply (Fast Charging)
Use ONLY a Zebra approved UL LISTED ITE (IEC/EN
60950-1, LPS/SELV) power supply with electrical
ratings: Output 5 VDC, min 2.5 A, with a maximum
ambient temperature of at least 50°C. Use of
alternative power supply will invalidate any approvals
given to this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental
Protection
Administration)
requires dry battery
producing or
importing firms in
accordance with Article 15 of the Waste Disposal Act
are required to indicate the recycling marks on the
batteries used in sales, giveaway or promotion. Contact
a qualified Taiwanese recycler for proper battery
disposal.
Battery Information
Use only Zebra approved batteries. Accessories which have battery charging capability are approved for use with the following battery models:
• Model Number BT-000314 (3.6 VDC, 4,300 mAh).
Zebra rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can
operate or be stored before needing replacement.
Many factors affect the actual life cycle of a battery
pack, such as heat, cold, harsh environmental
conditions and severe drops.
When batteries are stored over six (6) months, some
irreversible deterioration in overall battery quality may
occur. Store batteries at half of full charge in a dry, cool
place, removed from the equipment to prevent loss of
capacity, rusting of metallic parts and electrolyte
leakage. When storing batteries for one year or longer,
the charge level should be verified at least once a year
and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one
year, regardless if the battery was purchased
separately or included as part of the mobile computer or
bar code scanner. For more information on Zebra
batteries, please visit: http://www.zebra.com/
batterybasics.
Battery Safety Guidelines
The area in which the units are charged should be clear of debris and combustible materials or chemicals. Particular care should be taken where the device is charged in a non commercial environment.
• Follow battery usage, storage, and charging
guidelines found in the user's guide.
• Improper battery use may result in a fire, explosion,
or other hazard.
• To charge the mobile device battery, the battery and
charger temperatures must be between +32°F and
+104°F (0°C and +40°C).
• Do not use incompatible batteries and chargers. Use
of an incompatible battery or charger may present a
risk of fire, explosion, leakage, or other hazard. If
you have any questions about the compatibility of a
battery or a charger, contact Zebra support.
• For devices that utilize a USB port as a charging
source, the device shall only be connected to
products that bear the USB-IF logo or have
completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform,
puncture, or shred.
• Severe impact from dropping any battery-operated
device on a hard surface could cause the battery to
overheat.
• Do not short circuit a battery or allow metallic or
conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose
to water or other liquids, or expose to fire, explosion,
or other hazard.
• Do not leave or store the equipment in or near areas
that might get very hot, such as in a parked vehicle
or near a radiator or other heat source. Do not place
battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose
of used re-chargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has
been swallowed.
• In the event of a battery leak, do not allow the liquid
to come in contact with the skin or eyes. If contact
has been made, wash the affected area with large
amounts of water and seek medical advice.
• If you suspect damage to your equipment or battery,
contact Zebra support to arrange for inspection.
Use with Hearing Aids - FCC
When some wireless devices are used near some
hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining
noise. Some hearing devices are more immune than
others to this interference noise, and wireless devices
also vary in the amount of interference they generate.
In the event of interference, you may want to consult
your hearing aid supplier to discuss solutions.
The wireless telephone industry has developed ratings
for some of their mobile phones to assist hearing
device users in finding phones that may be compatible
with their hearing devices. Not all phones have been
rated. Zebra terminals that are rated have the rating
included on the Declaration of Conformity (DoC) at
http://www.zebra.com/doc.
The ratings are not guarantees. Results will vary
depending on the user's hearing device and hearing
loss. If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal
needs.
ANSI C63.19 Rating System
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less
interference to hearing devices than phones that are
not labeled. M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC
requirements and are likely to be more usable with a
hearing device's telecoil ('T Switch' or 'Telephone
Switch') than unrated phones. T4 is the better/higher of
the two ratings. (Note that not all hearing devices have
telecoils in them.)
Hearing devices may also be measured for immunity to
this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Hearing Aid Compatibility
This phone has been tested and rated for use with
hearing aids for some of the wireless technologies that
it uses. However, there may be some newer wireless
technologies used in this phone that have not been
tested yet for use with hearing aids. It is important to try
the different features of this phone thoroughly and in
different locations using your hearing aid or cochlear
implant to determine if you hear any interfering noise.
Consult your service provider or the manufacturer of
this phone for information on hearing aid compatibility.
If you have questions about return or exchange
policies, consult your service provider or phone retailer.
This phone has been tested to ANSI C63.19 and rated for use with hearing aids; it received an M3 and T3 rating. This device is marked HAC showing compliance with the applicable requirements of the FCC.
Radio Frequency Interference Requirements-FCC
Note: This equipment has
been tested and found to
comply with the limits for a
Class B digital device,
pursuant to Part 15 of the
FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio
communications. However there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and
receiver
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV
technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Radio Frequency Interference Requirements- Canada
CAN ICES-3 (B)/NMB-3(B)
Radio Transmitters
This device complies with Industry Canada's licenceexempt RSSs. Operation is subject to the following two
conditions: (1) This device may not cause interference;
and (2) This device must accept any interference,
including interference that may cause undesired
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie
Canada applicables aux appareils radio exempts de
licence. L'exploitation est autorisée aux deux conditions
suivantes: (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter
tout brouillage radio électrique subi même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the
following restrictions:
• Restricted Band 5.60 - 5.65 GHz
Pour les équipements RLAN:
L'utilisation de la bande RLAN 5 GHz au Canada
présente les limitations suivantes :
• Bande restreinte 5.60 - 5.65 GHz
Label Marking: The Term 'IC:' before the radio
certification only signifies that Industry Canada
technical specifications were met.
Etiquette de marquage: Le terme "IC" avant la certification radio signifie que le produit est compatible avec le spécification Industrie Canada.
Marking and European Economic Area (EEA)
The use of 2.4GHz RLAN’s, for use through the EEA, have the following restrictions:
CAUTION Only use Zebra approved and UL
Listed accessories, battery packs and battery
chargers.
Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be
dry before connecting to an external power
source.
Declared maximum operating temperature: 50°C.
CAUTION Operation of the device
without regulatory approval is illegal.
CAUTION The device for the band
5150-5250 MHz is only for indoor usage to
reduce potential for harmful interference to
co-Channel mobile satellite systems. High
power radars are allocated as primary users
(meaning they have priority) of 5250-5350
MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to
LE-LAN devices.
AVERTISSEMENT Le dispositive
fonctionnant dans la bande 5150-5250
MHz est réservé uniquement pour une
utilisation à l'intérieur afin de réduire
les risques de brouillage préjudiciable
aux systèmes de satellites mobiles
utilisant les mêmes canaux. Les
utilisateurs de radars de haute
puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité)
pour les bands 5250-5350 MHz et
5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou
des dommages aux dispositifs LANEL.
CAUTION In order to avoid or minimize
the potential risk of ergonomic injury follow
the recommendations below. Consult with
your local Health & Safety Manager to
ensure that you are adhering to your
company's safety programs to prevent
employee injury.
NOTE Connection to an alert device
that will cause a vehicle horn to sound
or lights to flash on receipt of a call on
public roads is not permitted.
IMPORTANT Before installing or using,
check state and local laws regarding
windshield mounting and use of
equipment.
CAUTION Please observe all warning
notices with regard to the usage of wireless
devices.
Safety Information
CAUTION Risk of explosion if battery is
replaced by an incorrect type. Dispose of
batteries according to instructions.
Review Copy
• Maximum radiated transmit power of 100 mW EIRP
in the frequency range 2.400 - 2.4835 GHz.
• 5.15 - 5.35 GHz is restricted to indoor use only.
Bluetooth® Wireless Technology for use through the EEA has the following restrictions:
• Maximum radiated transmit power of 100mW EIRP
in the frequency range 2.400 - 2.4835 GHz.
Statement of Compliance
Zebra hereby declares that this radio equipment is in
compliance with Directive 2011/65/EU and 1999/5/EC
or 2014/53/EU (2014/53/EU supersedes 1999/5/EC
from 13th June 2017). The full text of the EU
Declaration of Conformity is available at the following
internet address: http://www.zebra.com/doc.
Korea Warning Statement for Class B ITE
Other Countries
Australia
Use of 5GHz RLAN’s in Australia is restricted in the following band 5.60 – 5.65GHz.
Brazil (UNWANTED EMISSIONS - ALL PRODUCTS)
Declarações Regulamentares para TC56DJ Brazil
Nota: A marca de certificação se aplica ao
Transceptor, modelo TC56DJ. Este equipamento opera
em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de
estações do mesmo tipo, e não pode causar
interferência a sistemas operando em caráter primário.
Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br
Este produto está homologado pela Anatel, de acordo
com os procedimentos regulamentados pela
Resolução n°242/2000 e atende aos requisitos
técnicos aplicados, incluindo os limites de exposição
da Taxa de Absorção Específica referente a campos
elétricos, magnéticos e eletromagnéticos de
radiofrequência, de acordo com as Resoluções n° 303/
2002 e 533/2009.
Chile
Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria de telecomunicaciones, relativa a radiaciones electromagnéticas.
Conforme a Resolución 755 parte j.1), se ajustará el dispositivo a operar en interiores en las siguientes bandas con una potencia máxima radiada no superior a 150mW:
• 2.400 hasta 2.483,5 MHz
• 5.150 hasta 5.250MHz
• 5.250 hasta 5.350MHz
• 5.725 hasta 5.850MHz
Además, de acuerdo con Resolución 755, para la
banda 5150-5250MHz la operación del equipo estará
restringida al interior de inmuebles y la densidad de
potencia radiada máxima no supera 7,5mW/MHz en
cualquier banda de 1MHz y 0.1875mW/25kHz en
cualquier banda de 25kHz.
China
抩扖幎桽ⅴₚ几⧏♾ₚ戌㇢⦿幼岏㞾㖐䤓ℶ❐広㢝
www.zebra.com/support
䫽帳扪几㪖心✛幐䦮↹♾㩴幱几⧏ KWWS
ZZZWHQDDFRPFQ
撪䓝㰈⬱ℐ嬎䣢宕 :
㆙࿌㸸実⊧㉮塭炻䞕嶗炻㑆↣炻㋌⌳ㆾ侭㈽ℍ䀓⍲
㯜烊
ὀព㸸ዴᯝ䓝㰈塓ᶵ㬋䠖✳⎟㚧㌊炻ㆾ↢䍘溻偨炻Ể
⬀⛐䆮䁠⍲℞Ṿ⌙昑
庆㖘広㢝⮓函∎䞷扖䤓䟄㻯
㦻ℶ❐䟄䭐戟⺓㹣⛇㟅䘖᧤6$5᧥㦏⮶⋋
:NJ᧨䶵⚗⦌⹅㪖 *% 䤓尐㻑ᇭ
⚗㫋幐᧶
Eurasian Customs Union
Данный продукт соответствует требованиям знака EAC.
Hong Kong
In accordance with HKTA1039, the band 5.15GHz -
5.35GHz is for indoor operation only.
Mexico
Restrict Frequency Range to: 2.450 – 2.4835 GHz.
La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su
operación no deseada.
South Korea
䟊╏ ⱨ㉔㉘⽸⏈ 㟨㟝 㩅 㤸䑀䝰㐔 ᴴ⏙㉥㢨 㢼㢀
䚨Gⱨ㉔㉘⽸⏈G㤸䑀䝰㐔Gᴴ⏙㉥㢨G㢼㡰⦐G㢬⮹
㙼㤸ḰGḴ⥜═G㉐⽸㏘⏈G䚔G㍌G㛺㏩⏼␘
Taiwan
㬌姕⁁㗗䁢ẩ㤕⭊㇞姕妰䘬ˤ ᶵ怑䓐㕤ᶨ凔㴰屣
侭ⶪ⟜ˤ
娚姕⁁䘬天≇傥㗗㍸ὃ➭⚢䘬炻㌫㍷㔠㒂㋽
䌚 , ⨺橼㑕㓦☐ㅱ䓐ᶵ㗗姕⁁䘬天ㆾ䫔Ḵ≇傥ˤ
咉䋲
⇝┮䘖榊㽱懊⺓㊶榊㳮丰䚕戵㽤
䶻◐ℛ㬬
倢⨚㆞崜巘⚗㫋⇝┮䘖⺓櫊榊㳮᧨槭倢峀♾᧨⏻
⚇ᇬ⟕壮㒥∎䞷劔⧖ₜ㈦㝔呹帙㦃櫊䘖ᇬ┯⮶┮䘖㒥
帙㦃☮岼岗䔈㊶♙┮厌ᇭ
䶻◐⥪㬬
⇝┮䘖⺓櫊榊㳮∎䞷ₜ㈦㈀檎歪咹⸘⏷♙㞍⚗㽤
抩≰᧷倢䤋䚍㦘㞍䚍廰㣑᧨㑘䵚☂⋫䞷᧨₵㟈⠓咂
䎰㞍㣑㡈㈦儋儛∎䞷ᇭ
ⓜ檔⚗㽤抩≰᧨㖖∬榊㽤≰尞⸩⇫㯼䎰偩榊抩≰ᇭ
⇝┮䘖⺓櫊榊㳮檗㉜♦⚗㽤抩≰㒥ぴ㯼ᇬ䱠⸇♙携䣑
䞷榊㽱懊⺓㊶榊㳮岼⌨㞍ᇭ
䂪⺠榊䭐㽱㈀檎᧨嵚ⰴ拸∎䞷
⨚壮 7&'-6$5 㲨䄥⋋ :NJ᧷抐䂻䞱❐䂻
⋋䍉᧶:NJ
Turkey
%XFLKD]7¾UN©HNDUDNWHUOHULQWDPDPóQóLKWLYDHGHQ
(76,769YH\DVRQUDNLV¾U¾P¾Q
NRGXYH(76,769YH\DVRQUDNL
V¾U¾P¾QNRGXWHNQLN¸]HOOLNOHULQHX\JXQGXU
Ukraine
Дане обладнання відповідає вимогам технічного
регламенту № 1057, 2008 на обмеження щодо
використання деяких небезпечних речовин в
електричних та електронних пристроях.
Thailand
ࡳ࠻࡚ࡻࡤ࠾ࡵࡎ࡚࠻ࡘࡐࡩ࠻ࡘࡴࡧࡤࡒ࠸࡚ࡊࡿࡐࡼ
ࡘ࠻࡞ࡩࡘࡡࡤࡋ࠻ࡼࡤ࠾ࡌࡩࡘ࠹ࡼࡤ࠸ࡪࡢࡐࡋ࠹ࡤ࠾࠸ࡎࡁ
Turkish WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur.
English: For EU Customers: All products at the end of their
life must be returned to Zebra for recycling. For information
on how to return product, please go to: http://
www.zebra.com/weee.
Français: Clients de l'Union Européenne: Tous les produits
en fin de cycle de vie doivent être retournés à Zebra pour
recyclage. Pour de plus amples informations sur le retour
de produits, consultez : http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los
productos deberán entregarse a Zebra al final de su ciclo
de vida para que sean reciclados. Si desea más
información sobre cómo devolver un producto, visite: http://
www.zebra.com/weee.
Bulgarish: За клиенти от ЕС: След края на полезния им
живот всички продукти трябва да се връщат на Zebra за
рециклиране. За информация относно връщането на
продукти, моля отидете на адрес: http://www.zebra.com/
weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte
müssen am Ende ihrer Lebensdauer zum Recycling an
Zebra zurückgesandt werden. Informationen zur
Rücksendung von Produkten finden Sie unter http://
www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti
al termine del rispettivo ciclo di vita devono essere restituiti
a Zebra al fine di consentirne il riciclaggio. Per informazioni
sulle modalità di restituzione, visitare il seguente sito Web:
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim
de vida devem ser devolvidos à Zebra para reciclagem.
Para obter informações sobre como devolver o produto,
visite: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen
aan het einde van hun levensduur naar Zebra te worden
teruggezonden voor recycling. Raadpleeg http://
www.zebra.com/weee voor meer informatie over het
terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty
wycofane z eksploatacji należy zwrócić do firmy Zebra w
celu ich utylizacji. Informacje na temat zwrotu produktów
znajdują się na stronie internetowej http://www.zebra.com/
weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné
po skonèení jejich životnosti vrátit spoleènosti Zebra
k recyklaci. Informace o zpùsobu vrácení produktu najdete
na webové stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea
lõppedes tagastada taaskasutamise eesmärgil Zebra'ile.
Lisainformatsiooni saamiseks toote tagastamise kohta
külastage palun aadressi: http://www
.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement
terméket a Zebra vállalathoz kell eljuttatni újrahasznosítás
céljából. A termék visszajuttatásának módjával kapcsolatos
tudnivalókért látogasson el a http://www.zebra.com/weee
weboldalra.
Svenska: För kunder inom EU: Alla produkter som uppnått
sin livslängd måste returneras till Zebra för återvinning.
Information om hur du returnerar produkten finns på http://
www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki
tuotteet on palautettava kierrätettäväksi Zebra-yhtiöön, kun
tuotetta ei enää käytetä. Lisätietoja tuotteen
palauttamisesta on osoitteessa http://www.zebra.com/
weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til
Zebra til recirkulering, når de er udtjent. Læs oplysningerne
om returnering af produkter på: http://www.zebra.com/
weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο
τέλος της διάρκειας ζωής τους, πρέπει να επιστρέφονται
στην Zebra για ανακύκλωση. Για περισσότερες
πληροφορίες σχετικά με την επιστροφή ενός προϊόντος,
επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο
Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-
aħħar tal-ħajja ta' l-użu tagħhom, iridu jiġu rritornati għ
and
Zebra għar-riċiklaġġ. Għal aktar tagħrif dwar kif għandek
tirritorna l-prodott, jekk jogħġbok żur: http://
www
.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la
sfârşitul duratei lor de funcţionare, trebuie returnate la
Zebra pentru reciclare. Pentru informaţii despre returnarea
produsului, accesaţi: http://www.zebra.com/weee.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku
življenjske dobe vrniti podjetju Zebra za reciklažo. Za
informacije o vračilu izdelka obiščite: http://
www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky
musia byť po uplynutí doby ich životnosti vrátené
spoločnosti Zebra na recykláciu. Bližšie informácie o
vrátení výrobkov nájdete na: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų
eksploatacijos laikui, turi būti grąžinti utilizuoti į kompaniją
„Zebra“. Daugiau informacijos, kaip grąžinti gaminį, rasite:
http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas
mūža beigām ir jānogādā atpakaļ Zebra otrreizējai
pārstrādei. Lai iegūtu informāciju par produktu nogādāšanu
Zebra, lūdzu, skatiet: http://www
.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm
ürünler geri dönüştürme için Zebra'ya iade edilmelidir.
Ürünlerin nasıl iade edileceği hakkında bilgi için lütfen şu
adresi ziyaret edin: http://www.zebra.com/weee.
End User License Agreement
IMPORTANT PLEASE READ CAREFULLY: This End User
License Agreement (“EULA”) is a legal agreement between
you (either an individual or a single entity) (“Licensee”) and
Zebra International Holdings Corporation (“Zebra”) for
software, owned by Zebra and its affiliated companies and
its third party suppliers and licensors, that accompanies
this EULA, which includes machine-readable instructions
used by a processor to perform specific operations other
than machine-readable instructions used for the sole
purpose of booting hardware during a startup sequence
(“Software”). BY USING THE SOFTWARE, YOU
ACKNOWLEDGE ACCEPTANCE OF THE TERMS OF
THIS EULA. IF YOU DO NOT ACCEPT THESE TERMS,
DO NOT USE THE SOFTWARE.
1. GRANT OF LICENSE. Zebra grants you, End-User
Customer, the following rights provided that you comply
with all terms and conditions of this EULA: For Software
associated with Zebra hardware, Zebra hereby grants you
a limited, personal, non-exclusive license during the term of
this Agreement to use the Software solely and exclusively
for your internal use in support of the operation of your
associated Zebra hardware and for no other purpose. To
the extent that any portion of the Software is provided to
you in a manner that is designed to be installed by you, you
may install one copy of the installable Software on one hard
disk or other device storage for one printer, computer,
workstation, terminal, controller, access point or other
digital electronic device, as applicable (an “Electronic
Device”), and you may access and use that Software as
installed on that Electronic Device so long as only one copy
of such Software is in operation. For a standalone
Software application, you may install, use, access, display
and run only the number of copies of the Software to which
you are entitled. You may make one copy of the Software in
machine readable form for backup purposes only, provided
that the backup copy must include all copyright or other
proprietary notices contained on the original. In the
absence of a support contract, you are entitled, for a period
of ninety (90) days from when the instance of Software (or
hardware including the Software) are first shipped by Zebra
or downloaded by End-User Customer, to obtain, if
available, updates, from Zebra and operational technical
support, not including implementation, integration or
deployment support (“Entitlement Period”). You may not
obtain updates from Zebra after the Entitlement Period,
unless covered by a Zebra support contract or other written
agreement with Zebra.
Certain items of the Software may be subject to open
source licenses. The open source license provisions may
override some of the terms of this EULA. Zebra makes the
applicable open source licenses available to you on a Legal
Notices readme file available on your device and/or in
System Reference guides or in Command Line Interface
(CLI) Reference guides associated with certain Zebra
products.
1.1 Authorized Users. For a standalone Software
application, the licenses granted are subject to the
condition that you ensure the maximum number of
authorized users accessing and using the Software either
alone or concurrently is equal to the number of user
licenses for which you are entitled to use either through a
Zebra channel partner member or Zebra. You may
purchase additional user licenses at any time upon
payment of the appropriate fees to the Zebra channel
partner member or Zebra.
1.2 Software Transfer. You may only transfer this EULA
and the rights to the Software or updates granted herein to
a third party in connection with the support or sale of a
device which the Software accompanied or in connection
with a standalone Software application during the
Entitlement Period or as covered by a Zebra support
contract. In such event, the transfer must include all of the
Software (including all component parts, the media and
printed materials, any upgrades, and this EULA) and you
may not retain any copies of the Software. The transfer
may not be an indirect transfer, such as a consignment.
Prior to the transfer, the end user receiving the Software
must agree to all the EULA terms. If Licensee is purchasing
Zebra Products and licensing Software for end use by a
U.S. Government end user, Licensee may transfer such
Software license, but only if: (i) Licensee transfers all
copies of such Software to the U.S. Government end user
or to an interim transferee, and (ii) Licensee has first
obtained from the transferee (if applicable) and ultimate
end user an enforceable end user license agreement
containing restrictions substantially identical to the ones
contained in this Agreement. Except as stated in the
foregoing, Licensee and any transferee(s) authorized by
this provision may not otherwise use or transfer or make
available any Zebra software to any third party nor permit
any party to do so.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Zebra
reserves all rights not expressly granted to you in this
EULA. The Software is protected by copyright and other
intellectual property laws and treaties. Zebra or its
suppliers own the title, copyright and other intellectual
property rights in the Software. The Software is licensed,
not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not
reverse engineer, decompile, disassemble, or otherwise
attempt to discover the source code or algorithms of, the
Software (except and only to the extent that such activity is
expressly permitted by applicable law not withstanding this
limitation), or modify, or disable any features of, the
Software, or create derivative works based on the
Software. You may not rent, lease, lend, sublicense or
provide commercial hosting services with the Software.
4. CONSENT TO USE OF DATA. You agree that Zebra and
its affiliates may collect and use technical information
gathered as part of the product support services related to
the Software provided to you that does not personally
identify you. Zebra and its affiliates may use this
information solely to improve their products or to provide
customized services or technologies to you. At all times
your information will be treated in accordance with Zebra's
Privacy Policy, which can be viewed at: http://
www.zebra.com.
5. LOCATION INFORMATION. The Software may enable
you to collect location-based data from one or more client
devices which may allow you to track the actual location of
those client devices. Zebra specifically disclaims any
liability for your use or misuse of the location-based data.
You agree to pay all reasonable costs and expenses of
Zebra arising from or related to third party claims resulting
from your use of the location-based data.
6. SOFTWARE RELEASES. During the Entitlement
Period, Zebra or Zebra's channel partner members may
make available to you software releases as they become
available after the date you obtain your initial copy of the
Software. This EULA applies to all and any component of
the release that Zebra may make available to you after the
date you obtain your initial copy of the Software, unless
Zebra provides other license terms along with such
release. To receive Software provided through the release,
you must first be licensed for the Software identified by
Zebra as entitled to the release. We recommend that you
periodically check availability of a Zebra support contract to
ensure that you are entitled to receive any available
Software releases. Some features of the Software may
require you to have access to the internet and may be
subject to restrictions imposed by your network or internet
provider.
7. EXPORT RESTRICTIONS. You acknowledge that the
Software is subject to export restrictions of various
countries. You agree to comply with all applicable
international and national laws that apply to the Software,
including all the applicable export restriction laws and
regulations.
8. ASSIGNMENT. You may not assign this Agreement or
any of your rights or obligations hereunder (by operation of
law or otherwise) without the prior written consent of Zebra.
Zebra may assign this Agreement and its rights and
obligations without your consent. Subject to the foregoing,
this Agreement shall be binding upon and inure to the
benefit of the parties to it and their respective legal
representatives, successors and permitted assigns.
9. TERMINATION. This EULA is effective until terminated.
Your rights under this License will terminate automatically
without notice from Zebra if you fail to comply with any of
the terms and conditions of this EULA. Zebra may
terminate this Agreement by offering you a superseding
Agreement for the Software or for any new release of the
Software and conditioning your continued use of the
Software or such new release on your acceptance of such
superseding Agreement. Upon termination of this EULA,
you must cease all use of the Software and destroy all
copies, full or partial, of the Software.
10. DISCLAIMER OF WARRANTY. UNLESS
SEPARATELY STATED IN A WRITTEN EXPRESS
LIMITED WARRANTY, ALL SOFTWARE PROVIDED BY
ZEBRA IS PROVIDED “AS IS” AND ON AN “AS
AVAILABLE” BASIS, WITHOUT WARRANTIES OF ANY
KIND FROM ZEBRA, EITHER EXPRESS OR IMPLIED.
TO THE FULLEST EXTENT POSSIBLE PURSUANT TO
APPLICABLE LAW, ZEBRA DISCLAIMS ALL
WARRANTIES EXPRESS, IMPLIED, OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, IMPLIED
WARRANTIES OF MERCHANTABILITY, SATISFACTORY
QUALITY OR WORKMANLIKE EFFORT, FITNESS FOR A
PARTICULAR PURPOSE, RELIABILITY OR
AVAILABILITY, ACCURACY, LACK OF VIRUSES, NON
INFRINGEMENT OF THIRD PARTY RIGHTS OR OTHER
VIOLATION OF RIGHTS. ZEBRA DOES NOT WARRANT
THAT THE OPERATION OF THE SOFTWARE WILL BE
UNINTERRUPTED OR ERROR FREE. TO THE EXTENT
THAT THE SOFTWARE COVERED BY THIS EULA
INCLUDES EMULATION LIBRARIES, SUCH EMULATION
LIBRARIES DO NOT WORK 100% CORRECTLY OR
COVER 100% OF THE FUNCTIONALITY BEING
EMULATED, ARE OFFERED “AS IS” AND WITH ALL
FAULTS, AND ALL THE DISCLAIMERS AND
LIMITATIONS CONTAINED IN THIS PARAGRAPH AND
THIS AGREEMENT APPLY TO SUCH EMULATION
LIBRARIES. SOME JURISDICTIONS DO NOT ALLOW
EXCLUSIONS OR LIMITATIONS OF IMPLIED
WARRANTIES, SO THE ABOVE EXCLUSIONS OR
LIMITATIONS MAY NOT APPLY TO YOU. NO ADVICE OR
INFORMATION, WHETHER ORAL OR WRITTEN,
OBTAINED BY YOU FROM ZEBRA OR ITS AFFILIATES
SHALL BE DEEMED TO ALTER THIS DISCLAIMER BY
ZEBRA OF WARRANTY REGARDING THE SOFTWARE,
OR TO CREATE ANY WARRANTY OF ANY SORT FROM
ZEBRA.
11. THIRD-PARTY APPLICATIONS. Certain third party
applications may be included with, or downloaded with this
Software. Zebra makes no representations whatsoever
about any of these applications. Since Zebra has no control
over such applications, you acknowledge and agree that
Zebra is not responsible for such applications. You
expressly acknowledge and agree that use of third party
applications is at your sole risk and that the entire risk of
unsatisfactory quality, performance, accuracy and effort is
with you. You agree that Zebra shall not be responsible or
liable, directly or indirectly, for any damage or loss,
including but not limited to any damage to or loss of data,
caused or alleged to be caused by, or in connection with,
use of or reliance on any such third party content, products,
or services available on or through any such application.
You acknowledge and agree that the use of any third-party
application is governed by such third party application
provider's Terms of Use, License Agreement, Privacy
Policy, or other such agreement and that any information or
personal data you provide, whether knowingly or
unknowingly, to such third-party application provider, will be
subject to such third party application provider's privacy
policy, if such a policy exists. ZEBRA DISCLAIMS ANY
RESPONSIBILITY FOR ANY DISCLOSURE OF
INFORMATION OR ANY OTHER PRACTICES OF ANY
THIRD PARTY APPLICATION PROVIDER. ZEBRA
EXPRESSLY DISCLAIMS ANY WARRANTY REGARDING
WHETHER YOUR PERSONAL INFORMATION IS
CAPTURED BY ANY THIRD PARTY APPLICATION
PROVIDER OR THE USE TO WHICH SUCH PERSONAL
INFORMATION MAY BE PUT BY SUCH THIRD PARTY
APPLICATION PROVIDER.
12. LIMITATION OF LIABILITY. ZEBRA WILL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND ARISING
OUT OF OR RELATING TO THE USE OR THE INABILITY
TO USE THE SOFTWARE OR ANY THIRD PARTY
APPLICATION, ITS CONTENT OR FUNCTIONALITY,
INCLUDING BUT NOT LIMITED TO DAMAGES CAUSED
BY OR RELATED TO ERRORS, OMISSIONS,
INTERRUPTIONS, DEFECTS, DELAY IN OPERATION
OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO
CONNECT, NETWORK CHARGES, IN-APP
PURCHASES, AND ALL OTHER DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES EVEN IF ZEBRA HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. SOME JURISDICTIONS DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO
YOU. NOTWITHSTANDING THE FOREGOING, ZEBRA'S
TOTAL LIABILITY TO YOU FOR ALL LOSSES,
DAMAGES, CAUSES OF ACTION, INCLUDING BUT NOT
LIMITED TO THOSE BASED ON CONTRACT, TORT, OR
OTHERWISE, ARISING OUT OF YOUR USE OF THE
SOFTWARE OR THIRD PARTY APPLICATIONS, OR ANY
OTHER PROVISION OF THIS EULA, SHALL NOT
EXCEED THE FAIR MARKET VALUE OF THE
SOFTWARE OR AMOUNT PURCHASER PAID
SPECIFICALLY FOR THE SOFTWARE. THE
FOREGOING LIMITATIONS, EXCLUSIONS, AND
DISCLAIMERS (INCLUDING SECTIONS 10, 11, 12, AND
15) SHALL APPLY TO THE MAXIMUM EXTENT
PERMITTED BY APPLICABLE LAW, EVEN IF ANY
REMEDY FAILS ITS ESSENTIAL PURPOSE.
13. INJUNCTIVE RELIEF. You acknowledge that, in the
event you breach any provision of this Agreement, Zebra
will not have an adequate remedy in money or damages.
Zebra shall therefore be entitled to obtain an injunction
against such breach from any court of competent
jurisdiction immediately upon request without posting bond.
Zebra's right to obtain injunctive relief shall not limit its right
to seek further remedies.
14. MODIFICATION. No modification of this Agreement shall be binding unless it is in writing and is signed by an authorized representative of the party against whom enforcement of the modification is sought.
15. U.S. GOVERNMENT END USERS RESTRICTED
RIGHTS. This provision only applies to U.S. Government
end users. The Software is a "commercial item" as that
term is defined at 48 C.F.R. Part 2.101, consisting of
“commercial computer software” and “computer software
documentation” as such terms are defined in 48 C.F.R. Part
252.227-7014(a)(1) and 48 C.F.R. Part 252.2277014(a)(5), and used in 48 C.F.R. Part 12.212 and 48
C.F.R. Part 227.7202, as applicable. Consistent with 48
C.F.R. Part 12.212, 48 C.F.R. Part 252.227-7015, 48 C.F.R.
Part 227.7202-1 through 227.7202-4, 48 C.F.R. Part
52.227-19, and other relevant sections of the Code of
Federal Regulations, as applicable, the Software is
distributed and licensed to U.S. Government end users (a)
only as a commercial item, and (b) with only those rights as
are granted to all other end users pursuant to the terms and
conditions contained herein.
16. APPLICABLE LAW. This EULA is governed by the laws
of the state of Illinois, without regard to its conflict of law
provisions. This EULA shall not be governed by the UN
Convention on Contracts for the International Sale of
Goods, the application of which is expressly excluded.
Software Support
Zebra wants to ensure that customers have the latest
entitled software at the time of device purchase in order
to keep the device operating at peak performance
levels. To confirm that your Zebra device has the latest
entitled software available at the time of purchase, visit
http://www.zebra.com/support.
Check for the latest software from Support > Products, or search for the device and select Support > Software Downloads.
If your device does not have the latest entitled software as of your device purchase date, e-mail Zebra at entitlementservices@zebra.com and ensure you include the following essential device information:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled
to the latest version of software, as of the date you
purchased your device, you will receive an e-mail
containing a link directing you to a Zebra Web site to
download the appropriate software.
Warranty
For the complete Zebra hardware product warranty statement, go to: http://www.zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s network and run your applications.
If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support. If there is a problem with the equipment, they will contact the Zebra Global Customer Support at http:/ /www.zebra.com/support.
For the latest version of this guide go to: http:// www.zebra.com/support.
CMM Disclosure
㦻嫷㫋∬㗽 6-7䤓屓⸩冥Ⓟᇭ
2嫷䯉年㦘⹂䓸德⦷年捷ↅ㓏㦘⧖德㧟㠨₼䤓⚺摞⧖⦷
*%7屓⸩䤓棟摞尐㻑ⅴₚᇭ
; 嫷䯉年㦘⹂䓸德咂⺠⦷年捷ↅ䤓㩟⧖德㧟㠨₼䤓⚺
摞怔⒉*%7屓⸩䤓棟摞尐㻑ᇭ←₩♾⦷㷳
⮓᧨㫈㗽⸭棔㍔⑄⺈ₙ嫷₼㓢ಯರ䤓㔏㦾☮⥯扪嫛扪
㷴広㢝ᇭ᧥
This table was created to comply with China RoHS requirements.
韥눺ꙹ ꩡ끞녅껽驩ꓭ
% 鞾韥韥
閵뇊끞
ꗞꭖ뭪겕韥녅녡
넩韥韥鱉閵뇊끞 % 鞾
놹녅볁놶뼞韥韥ꈑ늱ꈑ
閵뇊꾅ꩡ끞뼍鱉阸냹ꑞ놶냱ꈑ
뼍ꐥ ꑝ麕덵꾢꾅ꩡ끞뼕ꯍ
넽걪鱽鲙
⚗㫋幐
Waste Electrical and Electronic Equipment (WEEE)
䜞Ԭ〦
(Parts)
ᴿᇩ⢟䍞
䫻
(Pb)⊔(Hg)䭿(Cd)
ޣԭ䬢
(Cr(VI))
ཐ⓪㚊㤥
(PBB)
ཐ⓪ӂ㤥䟐
(PBDE)
䠇ኔ䜞Ԭ
(Metal Parts)
XOO O O O
⭫䐥⁗ඍ
(Circuit
Modules)
XOO O O O
⭫㔼⭫㔼㓺Ԭ
(Cables and
Cable
Assemblies)
OOO O O O
ງᯏૂ㚐⢟䜞
Ԭ
(Plastic and
Polymeric
Parts)
OOO O O O
ݿᆜૂݿᆜ㓺Ԭ
(Optics and
Optical
Components)
OOO O O O
⭫⊖
(Batteries)
XOO O O O
Review Copy
Loading...