Zebra Technologies RFID-R402-2 Users manual

Closing the printer

Hold the top cover and press the cover
lock to release.

Lower the top cover. The ribbon carriage
automatically folds up into place.

Press down until the cover snaps closed.

Reporting Damage

If you discover damage or missing parts:

■

Immediately notify and file a damage report with the shipping company.

Zebra Technologies Corporation is not responsible for any damage
incurred during shipment of the printer and will not cover the repair of
this damage under its warranty policy.

■

Keep the carton and all packing material for inspection.

■

Notify the authorized reseller

This section describes how to set up your printer for the first time and use
the most common operating procedures for loading media in tear-off mode
and loading ribbon.

Modes of Printing

You can operate this printer in two different modes: tear-off or peel-off.

■

Standard tear-off mode allows you to tear off each label (or a strip of
labels) after it is printed.

■

In optional peel-off mode, the backing material is peeled away from the
label as it is printed. After this label is removed, the next one is printed.

The printer typically uses roll media, but you can use fan-fold media as
well.

For procedures to use optional modes and features, refer to the Using
Options section.

Getting Started