P1086664-001 ZXP Series 1 and 3 Mac OSX Driver Installation Guide i
ii ZXP Series 1 and 3 Mac OSX Driver Installation Guide P1086664-001
Introduction
The purpose of this document is to describe how to install the Zebra ZXP Series 1
and ZXP Series 3 Card Printer driver on a computer running the Mac OS X operating
system.
The Zebra ZXP Series 1 and ZXP Series 3 Card Printer driver for Mac OS X supports
monochrome and color printing, single- and double-sided printing, mag encoding,
and provides information about the printer and ribbon.
Installation
The Zebra ZXP Series 1 and ZXP Series 3 Card Printer driver for Mac OS X
supports—and has been tested on—the following version of Mac OS X:
• Mac OS X Yosemite (Version 10.10) 64 bit OS
• Mac OS X El Capitan (Version 10.11) 64 bit OS
P1086664-001 ZXP Series 1 and 3 Mac OSX Driver Installation Guide 1
Installation
Extracting les
Extracting les
Double-click on the Unied_Zebra_ZXPS3_S1_Card_Printer_Mac_Driver-1.0.0.0.pkg
binary le to initiate installation of the driver.
Note • The installation can be performed only in Administrator mode—type the
Administrator password when prompted.
Important • Ensure the Security & Privacy settings of the system are set to “Allow
apps downloaded from: Anywhere.”
The installation program will check to see if the software can be installed on the
computer—click Continue to proceed, or click Cancel to stop the installation.
Follow the instructions presented at the Introduction window and click Continue.
2 ZXP Series 1 and 3 Mac OSX Driver Installation Guide P1086664-001
Installation
Extracting les
The License window will display the End User License Agreement (EULA)—click
Print to print the EULA, click Save to save the EULA as a le on the computer, click
Go Back to return to the Introduction window, or click Continue to proceed with the
installation.
At the License Agreement acceptance dialog, click Agree to agree the terms of the
EULA proceed with the installation, or click Disagree to quit the installer. Click Read License to return to the License window.
P1086664-001 ZXP Series 1 and 3 Mac OSX Driver Installation Guide 3
Installation
Extracting les
Select the appropriate printer type: USB, or Ethernet.
4 ZXP Series 1 and 3 Mac OSX Driver Installation Guide P1086664-001
USB Printer Driver Installation
Select USB Printer and click Continue.
Installation
USB Printer Driver Installation
Important • Do not plug in the USB printer until prompted to do so, or after the
installation is complete.
The Installation Type window will be displayed and shows the space needed to install
the necessary les.
Click Install to continue, or click Go Back to return to the Printer Type window.
The Following les will be copied into the Mac System during installation.
After completing the installation, the window will display the installation successful
message; click Close.
6 ZXP Series 1 and 3 Mac OSX Driver Installation Guide P1086664-001
Ethernet Printer Driver Installation
Select Ethernet Printer and click Continue.
Installation
Ethernet Printer Driver Installation
Select the printer type by clicking the radio button next to the printer: ZXPS 11 for the
ZXP Series 1, ZXPS 31 for the ZXP Series 3 (single-sided), or ZXPS 32 for the ZXP
Series 3 (double-sided).
From the drop-down list, select the desired printer.
P1086664-001 ZXP Series 1 and 3 Mac OSX Driver Installation Guide 7
Installation
Ethernet Printer Driver Installation
The Installation Type window will be displayed and shows the space needed to install
the necessary les.
Click Install to continue, or click Go Back to return to the Printer Type window.
The following les will be copied to the following directory.
8 ZXP Series 1 and 3 Mac OSX Driver Installation Guide P1086664-001
Installation
Ethernet Printer Driver Installation
After completing the installation, the window will display the installation successful
message; click Close.
P1086664-001 ZXP Series 1 and 3 Mac OSX Driver Installation Guide 9
Installation
Uninstall
Uninstall
Note • The driver uninstall can only be performed in Administrator mode.
To uninstall the Zebra ZXP Series 1 and ZXP Series 3 Card Printer Mac OS X Driver,
type “ZebraZXPS3-S1DriverUninstall” in the Spotlight Search (which is available in
the top right corner of the screen, or use Command + Space). The uninstall app can
also be located in the application directory.
10 ZXP Series 1 and 3 Mac OSX Driver Installation Guide P1086664-001
Installation
Uninstall
The uninstaller will prompt for the administrator password two times, enter the
administrator password and click OK to proceed.
The uninstaller will remove the driver les and installed printers. Click OK to close
the installer.
P1086664-001 ZXP Series 1 and 3 Mac OSX Driver Installation Guide 11
12 ZXP Series 1 and 3 Mac OSX Driver Installation Guide P1086664-001
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.