Zebra Z-Perform 1000D User Manual
Media Type
Label
Adhesive
Type
Permanent
Receipt
Removable
Tag
No Adhesive
Wristband
Environment
Indoor
Material Type
Paper
Outdoor
Synthetic
Properties
Cold Temperature
Printing
Technology
Direct Thermal
(no Ribbon Required)
Deep Freeze
High Temperature
Thermal Transfer
(Ribbon Required)
Ultra High
Temperature
Finish
Matte
High Tack
Gloss
Chemical Resistance
-
Z-Perform™ 1000D
Note: Z-Perform 1000D is not recommended for applications involving long term exposure
to sunlight, extreme heat or for application on a PVC surface.
Additional Features
No ribbon required for direct thermal printing, therefore only one stock item needed
Produces high contrast black images with recommended Zebra printers
Good adhesion to a wide variety of surfaces
ISEGA approval for direct contact with dry and moist non-fatty foods
Adhesive complies with European food regulations EC 1935/2004, EU 10/2011 and BfR
XIV for direct contact with dry, moist and such kind of fatty foodstuffs which have a
reduction factor of at least 3
Adhesive complies with FDA 175.105 for direct contact with dry foodstuffs, or
alternatively separated by a functional barrier
Latex free adhesive
Suggested Applications
Indoor general purpose labelling
Labelling of most packaging materials
Shipping labels
Picking and receiving in warehousing applications
Shelf edge labelling, product and price labelling in retail
Product Identification
©2015 ZIH Corp. All rights reserved.
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
REV. 2 - December 2015
Description
Caliper
Facestock
Matte white uncoated thermal imaging paper
79 microns
Adhesive
Permanent acrylic adhesive
12 microns
Liner
60gsm glassine liner
51 microns
Total
142 microns ±10%
Recommended Zebra Printers:
Mobile, desktop, mid-range and highperformance thermal printers
Minimum Application Temperature:
When the label is applied, the environment
and surface should be above this temperature
5C
Service Temperature Range:
Following correct application and appropriate
dwell time (usually 24hrs) the media will
withstand this temperature range
-20C to 50C
Recommended Storage Conditions:
Storage of product before use
6 months duration when stored at 20C to
25C at 40% to 50% RH
Expected Life Span in Application:
Following correct application and appropriate
dwell time (usually 24hrs) we expect, but do
not warrant, a life span as indicated
Indoor use, for up to 1 year
Technical Specifications
Product Performance and Suitability
The information contained in this document is to be used for guidance only and is not
intended for use in setting specifications. All purchasers of Zebra products shall be solely
responsible for independently determining if the product conforms to all requirements of
their unique application.
For testing of this material, please order from the ZipShip price list or order sample roll
SAMPLE65345 for mid-range and industrial printers or SAMPLE65345-D for desktop
printers.
©2015 ZIH Corp. All rights reserved.
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners.
REV. 2 - December 2015
Loading...