TC51/TC52/TC56
Accessories
Regulatory Guide
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following Model Numbers: SHARECRADLEMC, SHARECRADLE-ME, SHARECRADLE-01, CBL-TC51-USB1-01
and KT-TC51-ENET1-01.
All Zebra devices are designed to be compliant with the rules and
regulations in the locations they are sold and will be labeled as
required.
Local language translation / Tradução do idioma local / Übersetzung in
die lokale Sprache / Raduccion de idioma local / Traduction en langue
locale / Prijevod na lokalni jezik / Traduzione in lingua locale / 現地語の
翻訳 / 현지 언어 번역 / Перевод на местный язык / 本地語言翻譯 / 本
地语言翻译 / Yerel dil çeviri /Tłumaczenie na język lokalny:
zebra.com/support
Any changes or modifications to Zebra equipment not expressly
approved by Zebra could void the user's authority to operate the
equipment.
Health and Safety Recommendations
Ergonomic Recommendations
In order to avoid or minimize the potential risk of ergonomic injury,
always follow good ergonomic workplace practices. Consult with your
local Health and Safety Manager to ensure that you are adhering to
your company’s safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Power Supply
Model Description
SHARECRADLE-MC 5-Slot Charge Only Cradle - Charges up to
five devices.
4-Slot Charge Only Cradle with 4-Slot Battery
Charger - Charges up to four devices and up
to four spare batteries.
20-Slot Battery Charger - Charges up to 20
spare batteries.
SHARECRADLE-ME 5-Slot Ethernet Cradle - Charges up to five
devices and provides Ethernet
communication.
SHARECRADLE-01 1-Slot USB Cradle - Charges one device and
allows USB communication to the device with
an additional micro USB cable.
4-Slot Battery Charger - Charges four spare
batteries.
CBL-TC51-USB1-01 Rugged Charge/USB Cable - Snap-on cable
for charging and USB communication.
Cradle Model: SHARECRADLE-MC,
SHARECRADLE-ME
Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 62368-1, SELV)
power supply with electrical ratings: Output 12 VDC, min 9 A, with a
maximum ambient temperature of at least 40°C. Use of alternative
power supply will invalidate any approvals given to this unit and may
be dangerous.
Cradle Model: SHARECRADLE-01
Use ONLY a Zebra approved UL LISTED ITE (IEC/EN 62368-1, SELV)
power supply with electrical ratings: Output 12 VDC, min 4.16 A, with a
maximum ambient temperature of at least 40°C. Use of alternative
power supply will invalidate any approvals given to this unit and may
be dangerous.
USB Charge Cable: CBL-TC51-USB1-01
Use ONLY an approved UL LISTED ITE (IEC/EN 62368-1, LPS/SELV)
power supply with electrical ratings: Output 5 VDC, min 1.2 A, with a
maximum ambient temperature of at least 50°C. Use of alternative
power supply will invalidate any approvals given to this unit and may
be dangerous.
Fast Charging
Use ONLY an approved UL LISTED ITE (IEC/EN 62368-1, LPS/SELV)
power supply with electrical ratings: Output 5 VDC, min 2.5 A, with a
maximum ambient temperature of at least 50°C. Use of alternative
power supply will invalidate any approvals given to this unit and may
be dangerous.
Radio Frequency Interference Requirements FCC
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference
Requirements - Canada
Innovation, Science and Economic Development Canada ICES-003
Compliance Label: CAN ICES-3 (B)/NMB-3(B)
Marking and European Economic
Area (EEA)
Statement of Compliance
Zebra hereby declares that this device is in compliance with all
applicable Directives, 2014/30/EU, 2014/35/EU and 2011/65/EU.
The full text of the EU Declaration of Conformity is available at:
zebra.com/doc.
EU Importer : Zebra Technologies B.V
Address: Mercurius 12, 8448 GX Heerenveen, Netherlands
Zebra reserves the right to make changes to any product to improve
reliability, function, or design. Zebra does not assume any product
liability arising out of, or in connection with, the application or use of
any product, circuit, or application described herein. No license is
granted, either expressly or by implication, estoppel, or otherwise
under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or
process in which the products might be used. An implied license exists
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL, U.S.A.
ZEBRA and the stylized Zebra head are trademarks of Zebra
Technologies Corporation, registered in many jurisdictions worldwide.
All other trademarks are the property of their respective owners.
©2021 Zebra Technologies Corporation and/or its affiliates. All rights
reserved.
MN-002870-03EN Revision A — April 2021
Japan (VCCI) - Voluntary Control Council for
Interference
Class B ITE
この装置は、クラス B 情報技術装置です。この装置は、家庭
環境で使用することを目的としていますが、この装置がラジ
オやテレビジョン受信機に近接して使用されると、受信障害
を引き起こすことがあります。 取扱説明書に従って正しい取
り扱いをして下さい。 VCCI-B
Korea Warning Statement for Class B ITE
기 종 별 사 용 자 안 내 문
B 급 기기
( 가정용
방송통신기자재 )
이 기기는 가정용(B 급) 전자파적합기기로서 주로
가정에서 사용하는 것을 목적으로 하며 , 모든
지역에서 사용할 수 있습니다 .
中国
合格证 :
Eurasian Customs Union
Евразийский Таможенный Союз
Данный продукт соответствует требованиям знака EAC.
Ukraine
Дане обладнання відповідає вимогам технічного регламенту №
1057, 2008 на обмеження щодо використання деяких небезпечних
речовин в електричних та електронних пристроях.
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life, please
refer to recycling/disposal advice at: zebra.com/weee.
Turkish WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur.
产品中有害物质的名称及含量
有害物质
部件名称
(Parts)
铅
汞
镉
(Hg)
金属部件
(Metal Parts)
电路模块
(Circuit Modules)
电缆及电缆组件
(Cables and Cable
Assemblies)
塑料和聚合物部件
(Plastic and Polymeric
Parts)
光学和光学组件
(Optics and Optical
Components)
电池
(Batteries)
(Pb)
X O O O O O
X O O O O O
O O O O O O
O O O O O O
O O O O O O
O O O O O O
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11364--
2014 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11364--2014 规定的限量要求。( 企业可在此处，根据实际情况对
上表中打 “×” 的技术原因进行进一步说明。）
This table was created to comply with China RoHS requirements.
(Cd)
六价铬
(Cr(VI))
(PBB)
多溴联苯
(PBDE)
多溴二苯醚
Zebra hereby declares that this device is in compliance with
Electromagnetic Compatibility Regulations 2016, the Electrical
Equipment (Safety) Regulations 2016 and the Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012.
The full text of the UK Declaration of Conformity is available at:
zebra.com/doc.
UK Importer: Zebra Technologies Europe Limited
Address: Dukes Meadow, Millboard Rd, Bourne End,
Buckinghamshire, SL8 5XF
United Kingdom
Statement of Compliance
Warranty
For the complete Zebra hardware product warranty statement, go to:
zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your
facility’s network and run your applications.
If you have a problem running your unit or using your equipment,
contact your facility’s Technical or Systems Support. If there is a
problem with the equipment, they will contact the Zebra Global
Customer Support at zebra.com/support.
For the latest version of this guide go to: zebra.com/support.
Loading...