TC55
REGULATORY GUIDE
Zebra reserves the right to make changes to any product to improve reliability, function, or
design. Zebra does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any patent right or patent,
covering or relating to any combination, system, apparatus, machine, material, method, or
process in which Zebra products might be used. An implied license exists only for equipment,
circuits, and subsystems contained in Zebra products.
Warranty
For the complete Zebra hardware product warranty statement, go to:
http:/www.zebra.com/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems
Support. If there is a problem with the equipment, they will contact the Global Customer Support
at: http://www.zebra.com/support.
For the latest version of this guide go to: http://www.zebra.com/support.
Zebra Technologies Corporation
Lincolnshire, IL 60069, U.S .A.
http://www.zebra.com
© 2017 ZIH Corp and/or its affiliates. All rights reserved. ZEBRA and the stylized Zebra
head are trademarks of ZIH Corp, registered in many jurisdictions worldwide. All other
trademarks are the property of their respective owners.
MN000016A07 Rev. A — April 2017
Regulatory Information
This guide applies to Model Number TC55AH, TC55BH and TC55CH.
All Zebra devices are designed to be compliant with rules and regulations in
locations they are sold and will be labeled as required.
Local language translations are available at the following website:
http://www.zebra.com/support
Any changes or modifications to Zebra equipment, not expressly approved
by Zebra, could void the user's authority to operate the equipment.
CAUTION Use only UL Listed batteries, chargers and accessories that
have been approved for use with this product(s).
Do NOT attempt to charge damp/wet mobile computers or
batteries. All components must be dry before connecting to
an external power source.
Declared maximum operating temperature: 50°C.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the performance or
reliability of the Global Positioning System (GPS) hardware, operating
software or other aspects of this product. UL has only tested for fire, shock
or casualties as outlined in UL's Standard(s) for Safety for Information
Technology Equipment, UL60950-1. UL Certification does not cover the
performance or reliability of the GPS hardware and GPS operating software.
UL MAKES NO REPRESENTATIONS, WARRANTIES OR
CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE
OR RELIABILITY OF ANY GPS RELATED FUNCTIONS OF THIS
PRODUCT.
Bluetooth® Wireless Technology
This is an approved Bluetooth product. For more information or to view the
End Product Listing, please visit http://www.bluetooth.org/tpg/listings.cfm.
Wireless Device Country Approvals
Regulatory markings, subject to certification, are applied to the device
signifying the radio(s) is/are approved for use in the following countries:
United States, Canada, Japan, China, S. Korea, Australia, and Europe.
Please refer to the Declaration of Conformity (DoC) for details of other
country markings. This is available at http://www.zebra.com/doc.
Note: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Croatia,
Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic,
Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Operation of the device without regulatory approval is illegal.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d)
which will ensure the product operates on the correct channels for the
particular country of use.
Frequency of Operation - FCC and IC
Industry Canada Statement:
Caution: The device for the band 5150 - 5250 MHz is only for indoor usage
to reduce potential for harmful interference to co-Channel mobile satellite
systems. High power radars are allocated as primary users (meaning they
have priority) of 5250 - 5350 MHz and 5650-5850 MHz and these radars
could cause interference and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande 5150 - 5250 MHz
est réservé uniquement pour une utilisation à l'intérieur afin de réduire les
risques de brouillage préjudiciable aux systèmes de satellites mobiles
utilisant les mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés utilisateurs
principaux (c.-à-d., qu'ils ont la priorité) pour les bands 5250 - 5350 MHz et
5650 - 5850 MHz et que ces radars pourraient causer du brouillage et/ou
des dommages aux dispositifs LAN-EL.
Health and Safety Recommendations
Ergonomic Recommendations
CAUTION In order to avoid or minimize the potential risk of ergonomic
injury follow the recommendations below. Consult with your
local Health & Safety Manager to ensure that you are
adhering to your company’s safety programs to prevent
employee injury.
• Reduce or eliminate repetitive motion
• Maintain a neutral posture
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded
electronic systems in motor vehicles (including safety systems). Check with
the manufacturer or its representative regarding your vehicle. You should
also consult the manufacturer of any equipment that has been added to your
vehicle.
An air bag inflates with great force. DO NOT place objects, including either
installed or portable wireless equipment, in the area over the air bag or in the
air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
Position your device within easy reach. Be able to access your device
without removing your eyes from the road.
Note: Connection to an alert device that will cause a vehicle horn to sound or
lights to flash, on receipt of a call on public roads, is not permitted.
IMPORTANT
Before installing or using, check state and local laws regarding windshield
mounting and use of equipment.
For Safe installation
• Do not put your phone in a location that obstructs the drivers vision or
interferes with the operation of the Vehicle.
• Do not cover an airbag.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to do” list
or flipping through your address book takes attention away from your
primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full attention to
driving. Check the laws and regulations on the use of wireless devices in the
areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good
common sense and remember the following tips:
1. Get to know your wireless device and any features such as speed dial
and redial. If available, these features help you to place your call without
taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice, and even heavy traffic can be hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention
from the road.
6. Use your wireless phone to call for help. Dial the Emergency services, (91-1 in the US, and 1-1-2 in Europe) or other local emergency number in
the case of fire, traffic accident or medical emergencies. Remember, it is
a free call on your wireless phone! The call can be made regardless of
any security codes and depending on a network, with or without a SIM
card inserted.
7. Use your wireless phone to help others in emergencies. If you see an
auto accident, crime in progress or other serious emergency where lives
are in danger, call the Emergency Services, (9-1-1 in the US, and 1-1-2 in
Europe) or other local emergency number, as you would want others to
do for you.
8. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency wireless number.
“The wireless industry reminds you to use your device / phone safely when
driving.”
Warnings for Use of Wireless Devices
Please observe all warning notices with regard to the usage of wireless
devices.
Potentially Hazardous Atmospheres - Vehicles Use
You are reminded of the need to observe restrictions on the use of radio
devices in fuel depots, chemical plants etc. and areas where the air contains
chemicals or particles (such as grain, dust, or metal powders) and any other
area where you would normally be advised to turn off your vehicle engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by
airport or airline staff. If your device offers a 'flight mode' or similar feature,
consult airline staff as to its use in flight.
Safety in Hospitals
Wireless devices transmit radio frequency energy and may affect medical
electrical equipment.
Wireless devices should be switched off wherever you are requested to do
so in hospitals, clinics or healthcare facilities. These requests are designed
to prevent possible interference with sensitive medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm
(6 inches) be maintained between a handheld wireless device and a
pacemaker to avoid potential interference with the pacemaker. These
recommendations are consistent with independent research and
recommendations by Wireless Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15 cm (6 inches) from their
pacemaker when turned ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the potential
for interference.
• If you have any reason to suspect that interference is taking place, turn
OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to
determine if the operation of your wireless product may interfere with the
medical device.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering
human exposure to electromagnetic fields from radio devices. For
information on “International” human exposure to electromagnetic fields
refer to the Zebra Declaration of Conformity (DoC) at
http://www.zebra.com/doc.
For further information on the safety of RF energy from wireless devices see http://www.zebra.com/corporateresponsibility located under Wireless
Communications and Health.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only Zebra
tested and approved belt-clips, holsters, and similar accessories to ensure
EU Compliance.
US and Canada
Phones (placed to ear or used with headset)
Use only Zebra tested and approved belt-clips, holsters, and similar
accessories to ensure FCC Compliance. The use of third-party belt-clips,
holsters, and similar accessories may not comply with FCC RF exposure
compliance requirements, and should be avoided. The FCC has granted an
Equipment Authorization for these model phones with all reported SAR
levels evaluated as in compliance with the FCC RF emission guidelines.
SAR information on these model phones is on file with the FCC and can be
found under the Display Grant section of http://www.fcc.gov/oet/ea/fccid.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna
used for this transmitter must not be co-located or operating in conjunction
with any other transmitter/antenna except those already approved in this
filing.
LED Devices
1. LED Compliance Statement:
2. Complies with IEC 62471:2006 and EN 62471:2008.
3. Classified as “EXEMPT RISK GROUP” according to IEC 62471:2006.
Power Supply
Use ONLY an approved UL LISTED ITE (IEC/EN 60950-1, LPS) power
supply with electrical ratings: Output 5 VDC, min 1.2 A, with a maximum
ambient temperature of at least 50 °C. Use of alternative power supply will
invalidate any approvals given to this unit and may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration)
requires dry battery producing or importing firms in
accordance with Article 15 of the Waste Disposal Act
are required to indicate the recycling marks on the
batteries used in sales, giveaway or promotion. Contact a qualified
Taiwanese recycler for proper battery disposal.
Battery Information
CAUTION Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to instructions.
Use only Zebra approved batteries. Accessories which have battery
charging capability are approved for use with the following battery models:
• 82-164807-01 (3.7Vdc, 2940 mAh)
• 82-172087-01 (3.7Vdc, 4410 mAh)
Note: '-02' version - Brazil sku.
Zebra rechargeable battery packs are designed and constructed to the
highest standards within the industry.
However, there are limitations to how long a battery can operate or be stored
before needing replacement. Many factors affect the actual life cycle of a
battery pack, such as heat, cold, harsh environmental conditions and severe
drops.
When batteries are stored over six (6) months, some irreversible
deterioration in overall battery quality may occur. Store batteries at half of full
charge in a dry, cool place, removed from the equipment to prevent loss of
capacity, rusting of metallic parts and electrolyte leakage. When storing
batteries for one year or longer, the charge level should be verified at least
once a year and charged to half of full charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Zebra batteries is one year, regardless if the
battery was purchased separately or included as part of the mobile
computer. For more information on Zebra batteries, please visit:
http://www.zebra.com/batterybasics
Battery Safety Guidelines
• The area in which the units are charged should be clear of debris and
combustible materials or chemicals. Particular care should be taken
where the device is charged in a non commercial environment.
• Follow battery usage, storage, and charging guidelines found in the
user's guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger
temperatures must be between 0 ºC and +45 ºC (+32 ºF and +113 ºF)
• Do not use incompatible batteries and chargers. Use of an incompatible
battery or charger may present a risk of fire, explosion, leakage, or other
hazard. If you have any questions about the compatibility of a battery or a
charger, contact Zebra Global Customer Support.
• For devices that utilize a USB port as a charging source, the device shall
only be connected to products that bear the USB-IF logo or have
completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard
surface could cause the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive objects to
contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the
battery, immerse or expose to water or other liquids, or expose to fire,
explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get very
hot, such as in a parked vehicle or near a radiator or other heat source.
Do not place battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-chargeable
batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been swallowed.
• In the event of a battery leak, do not allow the liquid to come in contact
with the skin or eyes. If contact has been made, wash the affected area
with large amounts of water and seek medical advice.
• If you suspect damage to your equipment or battery, contact Zebra
Global Customer Support to arrange for inspection.
Use with Hearing Aids
When some wireless devices are used near some hearing devices (hearing
aids and cochlear implants), users may detect a buzzing, humming, or
whining noise. Some hearing devices are more immune than others to this
interference noise, and wireless devices also vary in the amount of
interference they generate. In the event of interference you may want to
consult your hearing aid supplier to discuss solutions.
The wireless telephone industry has developed ratings for some of their
mobile phones, to assist hearing device users in finding phones that may be
compatible with their hearing devices. Not all phones have been rated.
Zebra terminals that are rated have the rating included on the Declaration of
Conformity (DoC) at http://www.zebra.com/doc.
The ratings are not guarantees. Results will vary depending on the user's
hearing device and hearing loss. If your hearing device happens to be
vulnerable to interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing device is the best way
to evaluate it for your personal needs.
ANSI C63.19 Rating System
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to
generate less interference to hearing devices than phones that are not
labeled. M4 is the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to
be more usable with a hearing device's telecoil (“T Switch” or “Telephone
Switch”) than unrated phones. T4 is the better/higher of the two ratings.
(Note that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of
interference. Your hearing device manufacturer or hearing health
professional may help you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to experience interference
noise from mobile phones.
Hearing Aid Compatibility
This phone has been tested and rated for use with hearing aids for some of
the wireless technologies that it uses. However, there may be some newer
wireless technologies used in this phone that have not been tested yet for
use with hearing aids. It is important to try the different features of this phone
thoroughly and in different locations, using your hearing aid or cochlear
implant, to determine if you hear any interfering noise. Consult your service
provider or the manufacturer of this phone for information on hearing aid
compatibility. If you have questions about return or exchange policies,
consult your service provider or phone retailer.
This phone has been tested to ANSI C63.19-2011 and rated for use with
hearing aids as follows:
• TC55AH: M4/T4 and TC55CH: M4/T3.
This device is marked HAC showing compliance with the applicable
requirements of the FCC.
This device is not HAC compliant during Voice Over IP / WLAN (VOIP) calls.
Radio Frequency Interference Requirements-FCC
Note: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radio Frequency Interference Requirements Canada
CAN ICES-3(B)/ NMB-3(B)
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the following restrictions:
• Restricted Band 5.60 - 5.65 GHz
This device complies with RSS 210 of Industry Canada. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada
applicable aux appareils radio exempts de licence. Son fonctionnement est
sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu,
y compris un brouillage susceptible de provoquer un fonctionnement
indésirable.
Label Marking: The Term “IC:” before the radio certification only signifies that
Industry Canada technical specifications were met.
Marking and European Economic Area (EEA)
The use of 5GHz RLAN’s throughout the EEA, have the following restriction:
• 5.15 - 5.35 GHz is restricted to indoor use only.
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with
Directive 2011/65/EU and 1999/5/EC or 2014/53/EU (2014/53/EU
supersedes 1999/5/EC from 13th June 2017). The full text of the EU
Declaration of Conformity is available at the following internet address:
http://www.zebra.com/doc.
Korea Warning Statement for Class B ITE
기 종별 사 용 자 안 내 문
B급 기기
( 가정용 방송통신기
자재 )
이 기기는 가정용 (B 급 ) 전자파적합기기로서 주로 가정
에서 사용하는 것을 목적으로 하며 , 모든 지역에서 사용
할 수 있습니다 .
Other Countries
Australia
Use of 5 GHz RLAN's in Australia is restricted in the following band 5.60 -
5.65GHz.
Brazil
Declarações Regulamentares para TC55AH
Nota: “A marca de certificação se aplica ao Transceptor, modelo TC55AH.
Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando em caráter
primário.”
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br.
Este equipamento opera em caráter secundário, isto é, não tem direito a
proteção contra interferência prejudicial, mesmo de estações do mesmo
tipo, e não pode causar interferência a sistemas operando em caráter
primário.
Este produto está homologado pela Anatel, de acordo com os
procedimentos regulamentados pela Resolução n°242/2000 e atende aos
requisitos técnicos aplicados, incluindo os limites de exposição da Taxa de
Absorção Específica referente a campos elétricos, magnéticos e
eletromagnéticos de radiofrequência, de acordo com as Resoluções n°
303/2002 e 533/2009.
Este dispositivo está em conformidade com as diretrizes de exposição à
radiofrequência quando posicionado pelo menos 1.5 centímetros de
distância do corpo. Para maiores informações, consulte o site da Anatel.
Chile
“Este equipo cumple con la Resolución No 403 de 2008, de la Subsecretaria
de telecomunicaciones, relativa a radiaciones electromagnéticas.”
China
通过访问以下网址可下载当地语言支持的产品说明书
http://www.zebra.com/contact
确认进网标贴和证书真 u 伪可查询网址 : http://www.tenaa.com.cn/
Hong Kong
In accordance with HKTA1039, the band 5.15GHz - 5.35GHz is for indoor
operation only.
Mexico
Restrict Frequency Range to: 2.450 - 2.4835 GHz.
La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.
South Korea
해당 무선설비는 운용 중 전파혼신 가능성이 있음
당해 무선설비 는전파혼 신 가능성이 있으므로 인명안전과 관련된 서비스는
할 수 없습니다 .
Tai wa n
臺灣
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均
不得擅自變更頻率、加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干
擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機
設備之干擾。
在 5.25 - 5.35 秭赫頻帶內操作之無線資訊傳輸設備，限於室內使用。
減少電磁波影響，請妥適使用。
SAR 標準值 2.0W/kg ；送測產品實測值為：0.768 W/kg
Turkey
Bu cihaz Türkçe karakterlerin tamamını ihtiva eden ETSI TS 123.038 V8.0.0
(veya sonraki sürümün kodu) ve ETSI TS 123.040 V8.1.0 (veya sonraki
sürümün kodu) teknik özelliklerine uygundur.
Ukraine
Дане обладнання відповідає вимогам технічного регламенту №1057, №
2008 на обмеження щодо використання деяких небезпечних речовин в
елек тричних та електронних пристроях.
Thailand
เครื่องโทรคมนาคมและอุปกรณนี้ มีความสอดคลองตามขอกําหนดของ
กทช .
Waste Electrical and Electronic
Equipment (WEEE)
English: For EU Customers: All products at the end of their life must be
returned to Zebra for recycling. For information on how to return product,
please go to: http://www.zebra.com/weee
Français : Clients de l'Union Européenne : Tous les produits en fin de cycle
de vie doivent être retournés à Zebra pour recyclage. Pour de plus amples
informations sur le retour de produits, consultez :
http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos deberán
entregarse a Zebra al final de su ciclo de vida para que sean reciclados. Si
desea más información sobre cómo devolver un producto, visite:
http://www.zebra.com/weee.
Български: За клиенти от ЕС: След края на полезния им живот всички
продукти трябва да се връщат на Zebra за рециклиране. За
информация относно връщането на продукти, моля отидете на адрес:
http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende
ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden.
Informationen zur Rücksendung von Produkten finden Sie unter
http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del
rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consentirne il
riciclaggio. Per informazioni sulle modalità di restituzione, visitare il
seguente sito Web: http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida devem
ser devolvidos à Zebra para reciclagem. Para obter informações sobre
como devolver o produto, visite: http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde
van hun levensduur naar Zebra te worden teruggezonden voor recycling.
Raadpleeg http://www.zebra.com/weee voor meer informatie over het
terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z
eksploatacji nale¿y zwróciæ do firmy Zebra w celu ich utylizacji. Informacje
na temat zwrotu produktów znajduj¹ siê na stronie internetowej
http://www.zebra.com/weee.
Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení jejich
životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu vrácení
produktu najdete na webové stránce: http://www.zebra.com/weee.
Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada
taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra
vállalathoz kell eljuttatni újrahasznosítás céljából. A termék
visszajuttatásának módjával kapcsolatos tudnivalókért látogasson el a
http://www.zebra.com/weee weboldalra.
Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe
vrniti podjetju Zebra za reciklažo. Za informacije o vraèilu izdelka obišèite:
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd
måste returneras till Zebra för återvinning. Information om hur du returnerar
produkten finns på http://www.zebra.com/weee.
Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava
kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja
tuotteen palauttamisesta on osoitteessa http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til
recirkulering, når de er udtjent. Læs oplysningerne om returnering af
produkter på: http://www.zebra.com/weee.
Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της διάρκειας
ζωής τους, πρέπει να επιστρέφονται στην Zebra για ανακύκλωση. Για
περισσότερες πληροφορίες σχετικά με την επιστροφή ενός προϊόντος,
επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee στο Διαδίκτυο.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja ta' lużu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal aktar
tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur:
http://www.zebra.com/weee.
Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po
uplynutí doby ich životnosti vrátené spoločnosti Zebra na recykláciu. Bližšie
informácie o vrátení výrobkov nájdete na: http://www.zebra.com/weee.
Lietuvių: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos laikui,
turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos, kaip
grąžinti gaminį, rasite: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir
jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par
produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee.
Hrvatski: Za kupce u Europskoj uniji: Svi se proizvodi po isteku vijeka
trajanja moraju vratiti tvrtki Zebra na recikliranje. Informacije o načinu
vraćanja proizvoda potražite na web-stranici: www.zebra.com/weee.
TURKISH WEEE Statement of Compliance
EEE Yönetmeliğine Uygundur
Software Support
Zebra wants to ensure that customers have the latest release of entitled
software at the time of product purchase.
To confirm that your Zebra device shipped with the latest release of entitled
software, visit: www.zebra.com/support. Check for the latest software from
Software Downloads > Product Line/Product > Go.
If your device does not have the latest entitled software release as of your
product purchase date, please e-mail a request to Zebra at:
entitlementservices@zebra.com.
You must include the following essential device information with your
request:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest software
release, you will receive an e-mail containing a link directing you to a Zebra
web site to download the appropriate software.
CMM Disclosure
部件名称
(Parts)
金属部件
(Metal Parts)
电路模块
(Circuit Modules)
电缆及电缆组件
(Cables and Cable
Assemblies)
有害物质
铅
(Pb)汞(Hg)镉(Cd)
OOO O O O
XOO O O O
OOO O O O
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
部件名称
(Parts)
塑料和聚合物部件
有害物质
铅
(Pb)汞(Hg)镉(Cd)
OOO O O O
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
(Plastic and Polymeric
Parts)
光学和光学组件
XOX O O O
(Optics and Optical
Components)
电池
XOO O O O
(Batteries)
本表格依据SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限
量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规
定的限量要求。( 企业可在此处，根据实际情况对上表中打 “×” 的技术原
因进行进一步说明。）
This table was created to comply with China RoHS requirements.
Zebra Technologies Corporation End User License
Agreement
BY INSTALLING AND/OR USING THIS PRODUCT, YOU ACKNOWLEDGE THAT YOU HAVE
READ THIS AGREEMENT, UNDERSTAND IT AND AGREE TO BE BOUND ITS TERMS. IF
YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, ZEBRA IS NOT WILLING TO
LICENSE THE PRODUCT TO YOU, AND YOU MUST NOT USE OR INSTALL THIS
PRODUCT.
Grant of License. Zebra grants you (“Licensee” or “you”) a personal, nonexclusive,
nontransferable, nonassignable, no cost license to use the software and documentation
(“Product(s)”) subject to the terms and conditions of this Agreement. You shall use the Products
only for your internal business purposes, exclusively to support Zebra devices. Any use of the
Products outside of the conditions set fo rth herein is strictly prohibited and will be deemed a
breach of this Agreement resulting in immediate termination of your License. In the event of a
breach of this Agreement, Zebra will be entitled to all available remedies at law or in equity
(including immediate injunctive relief and repossession of all Products unless Licensee is a
Federal agency of the United States Government).
You shall not distribute, sublicense, rent, loan, lease, export, re-export, resell, ship or divert or
cause to be exported, re-exported, resold, shipped or diverted, directly or indirectly, the
Products under this Agreement. You shall not, and shall not permit others to: (i) modify,
translate, decompile, bootleg, reverse engineer, disassemble, or extract the inner workings of
the Products, (ii) copy the look-and-feel or functionality of the Products; (iii) remove any
proprietary notices, marks, labels, or logos from the Products; (iv) rent or transfer all or some of
the Products to any other party without Zebra's prior written consent; or (v) utilize any computer
software or hardware which is designed to defeat any copy protection device, should the
Products be equipped with such a protection device.
Title to all copies of Products will not pass to Licensee at any time and remains vested
exclusively in Zebra. All intellectual property developed, originated, or prepared by Zebra in
connection with the Products remain vested exclusively in Zebra, and this Agreement does not
grant to Licensee any intellectual property rights.
Portions of the Products are protected by United States patent and copyright laws, international
treaty provisions, and other ap plicable laws. Therefore, you must treat the Products like any
other copyrighted material (e.g., a book or musical recording) except that you may make one
copy of the Product solely for back-up purposes. Unauthorized duplication of the Products
constitutes copyright infringement, and in the United States is punishable in federal court by fine
and imprisonment.
Disclaimer. ZEBRA MAKES, AND YOU RECEIVE, NO WARRANTIES OF ANY KIND,
WHETHER EXPRESS, IMPLIED, STATUTORY, OR IN ANY COMMUNICATION WITH YOU.
ZEBRA SPECIFICALLY DISCLAIMS ANY WARRANTY INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILTY, NONINFRINGEMENT, OR FITNESS FOR A
PARTICULAR PURPOSE. THE PRODUCTS ARE PROVIDED “AS IS.” ZEBRA DOES NOT
WARRANT THAT THE PRODUCTS WILL MEET YOUR REQUIREMENTS, OR THAT THE
OPERATION OF THE PRODUCTS WILL BE UNINTERRUPTED OR ERROR FREE, OR THAT
DEFECTS IN THE PRODUCTS WILL BE CORRECTED. ZEBRA MAKES NO WARRANTY
WITH RESPECT TO THE CORRECTNESS, ACCURACY, OR RELIABILITY OF THE
PRODUCTS. Some jurisdictions do not allow the exclusion of implied warranties, so the above
exclusion may not apply to you.
Limitation of Liability. THE TOTAL LIABILITY OF ZEBRA UNDER THIS AGREEMENT FOR
DAMAGES SHALL NOT EXCEED THE FAIR MARKET VALUE OF THE PRODUCTS
LICENSED UNDER THIS AGREEMENT. IN NO EVENT WILL ZEBRA BE LIABLE IN ANY
WAY FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES
OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST BUSINESS PROFITS, OR
LIABILITY OR INJURY TO THIRD PERSONS, WHETHER FORESEEABLE OR NOT,
REGARDLESS OF WHETHER ZEBRA HAS BEEN ADVISED OF THE POSSIBLITY OF SUCH
DAMAGES. Some jurisdictions do not permit limitations of liability for incidental or
consequential damages, so the above exclusions may not apply to you. This Limitation of
Liability provision survives the termination of this Agreement and applies notwithstanding any
contrary provision in this Agreement. Licensee must bring any action under this Agreement
within one (1) year after the cause of action arises.
Maintenance. Unless provided for in a separate agreement, Zebra shall not be responsible for
maintenance or field service of the Products.
High Risk Activities. The Products are not fault-tolerant and are not designed, manufactured or
intended for use or resale as on-line control software in hazardous environments requiring failsafe performance, such as in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control, direct life support machines, or weapons systems, in
which the failure of the Products could lead directly to death, personal injury, or severe physical
or environmental damage (“High Risk Activities”). Zebra and its suppliers specifically disclaim
any express or implied warranty of fitness for High Risk Activities, and if you elect to use the
Products in any High Risk Activities, you agree to indemnify, defend, and hold Zebra harmless
from and against any and all costs, damages, and losses related to that use.
U.S. Government. If you are acquiring the Products on behalf of any unit or agency of the U.S.
Government, the following shall apply. Use, duplication, or disclosure of the Products is subject
to the restrictions set forth in subparagraphs (c) (1) and (2) of the Commercial Computer
Software - Restricted Rights clause at FAR 52.227-19 (JUNE 1987), if applicable, unless being
provided to the Department of Defense. If being provided to the Department of Defense, use,
duplication, or disclosure of the Products is subject to the restricted rights set forth in
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at
DFARS 252.227-7013 (OCT 1988), if applicable. Products may or may not include a Restricted
Rights notice, or other notice referrin g specifically to the terms and conditions of this
Agreement. The terms and conditio ns of this Agreement shall each continue to apply, but only
to the extent that such terms and conditions are not inconsistent with the rights provided to you
under the aforementioned provisions of the FAR and DFARS, as applicable to the particular
procuring agency and procurem ent transaction.
Governing Law. This Agreement shall be governed by the laws of the United States of America
to the extent that they apply and otherwise by the laws of the State of New York without regard
to its conflict of laws provisions.
Compliance with Laws. Licensee will comply with all applicable laws and regulations, including
export laws and regulations of the United States. Licensee will not, without the prior
authorization of Zebra and the appropriate governmental authority of the United States, in any
form export or re-export, sell or resell, ship or reship, or divert, through direct or indirect means,
any item or technical data or direct or indirect products sold or otherwise furnished to any
person within any territory for wh ich the United States Government or any of its agencies at the
time of the action, requires an export license or other governmental approval. Violation of this
provision will be a material breach of this Agreement, permitting immediate termination by
Zebra.
Third Party Software. The Products may contain one or more items of Third-Party Software. The
terms of this Agreement govern your use of any Third-Party Software UNLESS A SEPARATE
THIRD-PARTY SOFTWARE LICENSE IS INCLUDED, IN WHICH CASE YOUR USE OF THE
THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARATE THIRD-PARTY
LICENSE.
Open Source Software. The Products may contain one or more items of Open Source Software.
Open Source Software is software covered by a publicly available license governed solely
under Copyright law, whereas the complete terms and obligations of such license at tach to a
licensee solely through the act of copying, using and/or distribution of the licensed software,
such obligations often include one or more of attribution obligations, distribution obligations,
copyleft obligations, and intellectual property encumbrances. The use of any Open Source
Software is subject to the terms and conditions of this Agreement as well as the terms and
conditions of the corresponding license of each Open Source Software package. If there is a
conflict between the terms and conditions of this Agreement and the terms and conditions of the
Open Source Software license, the applicable Open Source Software license will take
precedence. Copies of the licenses for the included Open Source Software, if any, as well as
their attributions, acknowledgements, and software information details, are provided in the
electronic copy of this Agreement, which is available in the Legal Notices or README file
associated with the Product. Zebra is required to reproduce the software licenses,
acknowledgments and copyright notices as provided by the authors and owners, thus, all such
information is provided in its native language form, without modification or translation.
Depending on the license terms of the specific Open Source Software, source code may not be
provided. Please reference and review the entire Open Source Software information to identify
which Open Source Software packages have source code provided or available. For
instructions on how to obtain a copy of any source code made publicly available by Zebra
related to Open Source Software distributed by Zebra, you may send your request (including
the Zebra Product name and version, along with the Open Source Software specifics) in writing
to: Zebra Technologies Corporation, Open Source Software Management, One Zebra Plaza,
Holtsville, NY 11742 USA.
To view additional information regarding licenses, acknowledgements and required copyright
notices for open source packages used in this Zebra product, touch Settings > About phone >
Legal information > Open source licenses.
Loading...