TC5301
Regulatory Guide
MN-004401-01EN-P
March 15, 2022
Zebra Technologies |
3 Overlook Point |
Lincolnshire, IL 60069 USA
zebra.com/support
ZEBRA and the stylized Zebra head are
trademarks of Zebra Technologies Corp.,
registered in many jurisdictions
worldwide. All other trademarks are the
property of their respective owners.
© 2022 Zebra Technologies Corp. and/or
its affiliates. All rights reserved.
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following model number: TC5301
All Zebra devices are designed to be compliant with the rules and
regulations in the locations they are sold and will be labeled as
required.
Local language translation / Tradução do idioma local / Übersetzung
in die lokale Sprache / Raduccion de idioma local / Traduction en
langue locale / Prijevod na lokalni jezik / Traduzione in lingua locale
/ 現地語の翻訳 / 현지 언어 번역 / Перевод на местный язык / 本地
語言翻譯 / 本地语言翻译 / Yerel dil çeviri /Tłumaczenie na język
lokalny: zebra.com/support
Any changes or modifications to Zebra equipment not expressly
approved by Zebra could void the user’s authority to operate the
equipment.
Declared maximum operating temperature: 50°C
For use only with Zebra approved and UL Listed mobile devices,
Zebra approved, and UL Listed/Recognized battery packs.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information on
the Bluetooth SIG listing, please visit bluetooth.com.
Regulatory Markings
Regulatory markings subject to certification are applied to the device
signifying the radio(s) is/are approved for use. Refer to the
Declaration of Conformity (DoC) for details of other country
markings. The DOC is available at: zebra.com/doc.
The regulatory marks specific to this device (including FCC and
ISED) are available on the screen of the device by following these
instructions:
Go to Settings > Regulatory.
CAUTION: Only use Zebra approved and
NRTL-certified accessories, battery packs, and battery
chargers. Do NOT attempt to charge damp/wet mobile
computers, printers or batteries. All components must
be dry before connecting to an external power source.
Health and Safety Recommendations
Ergonomic Recommendations
In order to avoid or minimize the potential risk of ergonomic injury,
always follow good ergonomic workplace practices. Consult with
your local Health and Safety Manager to ensure that you are
adhering to your company’s safety programs to prevent employee
injury.
Safety on the Road
Give your full attention to driving. Obey the laws and regulations on
the use of wireless devices in the areas where you drive.
The wireless industry reminds you to use your device / phone
safely when driving.
Restricted Use Locations
Remember to observe restrictions and obey all signs and
instructions on the use of electronic devices in restricted use
locations.
Safety in Hospitals and Aircraft
NOTE: Wireless devices transmit radio frequency
energy that may affect medical electrical equipment
and aircraft’s operation. Wireless devices should be
switched off wherever you are requested to do so in
staff. These requests are designed to prevent possible interference
with sensitive equipments.
hospitals, clinics, healthcare facilities or by airline
RF Exposure Guidelines
Safety Information
Reducing RF Exposure – Use Properly
instructions supplied.
The device complies with internationally recognized standards
covering human exposure to electromagnetic fields. For
information on international human exposure to electromagnetic
fields, refer to the Zebra Declaration of Conformity (DoC) at
zebra.com/doc.
Use only Zebra tested and approved headset, belt-clips, holsters,
and similar accessories to ensure RF exposure compliance. If
applicable, follow the instructions for use as detailed in the
accessory guide.
The use of third-party belt clips, holsters, and similar accessories
may not comply with RF exposure compliance requirements and
should be avoided.
For further information on the safety of RF energy from wireless
devices, refer to RF exposure and assessment standards section
at zebra.com/responsibility.
Handheld or Body-Worn Devices
To satisfy RF exposure requirements, this device must operate
with a minimum separation distance of 1.5 cm or more from a
user's body and nearby persons.
To satisfy RF exposure requirements, this device must be
hand-use only and, where applicable, use only with Zebra tested
and approved accessories.
Only operate the device in accordance with the
Laser Devices
Class 2 laser scanners use a low power, visible light
diode. As with any very bright light source such as the
beam. Momentary exposure to a Class 2 laser is not known to be
harmful.
SE5500
sun, the user should avoid staring directly into the light
CAUTION: Use of controls, adjustments, or the
performance of procedures other than those specified
in the supplied product documentation may result in
hazardous laser light exposure.
• Wavelength: 500-570 nm
• Maximum Output: 1 mW
• Pulse Duration: 4 ms
• Beam Divergence: 18°
• Repetition Rate: 16.7 ms
Scanner Labeling
Complies with 21 CFR1040.10 and 1040.11 except for
2
deviations pursuant to Laser Notice No. 56, dated May
08, 2019 and IEC/EN 60825-1:2014
1
Labels read:
1. Laser Light — do not stare into beam Class 2 Laser product.
500-570 mm 1 mW 4 ms
2. Complies with 21 CFR1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 56, DATED May 08,
2019 and IEC/EN 60825-1:2014.
LED Devices
Classified as ‘EXEMPT RISK GROUP’ according to
IEC 62471:2006 and EN 62471:2008.
• Pulse Duration of 17.7 ms for SE4720
• Pulse Duration of CW for SE5500
Weights & Measures
For devices that incorporate a 'Legal for Trade' weighing or
measuring instrument, Weights & Measures regulations place
responsibility of DEVICE OWNER to notify their local Weight &
Measures Authority and follow any Placing-in-Trade requirements.
These steps must be done prior to using the device to perform
measurement based financial transactions. More information can
be found at www.zebra.com/weights-measures.
Power Supply
WARNING ELECTRICAL SHOCK: Use only a Zebra
approved, Certified ITE SELV power supply with
appropriate electrical ratings. Use of alternative power
supply will invalidate any approvals given to this unit
and may be dangerous.
Batteries and Power Packs
This information applies to Zebra-approved batteries and power
packs containing batteries.
Battery Information
for use with the following battery models:
CAUTION: Risk of explosion if battery is replaced by
an incorrect type. Dispose of batteries according to
instructions.
Use only Zebra approved batteries. Accessories
which have battery charging capability are approved
• Model BT-000442 (3.85 VDC, 4680 mAh)
• Model BT-000442B (3.85 VDC, 4680 mAh)
• Model BT-000442A (3.85 VDC, 7000 mAh)
• Model BT-000442C (3.85 VDC, 4680 mAh)
Zebra approved rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations as to how long a battery can operate
or be stored before needing replacement. Many factors affect the
actual life cycle of a battery pack such as heat, cold, harsh
environmental conditions, and severe drops.
When batteries are stored over six months, some irreversible
deterioration in overall battery quality may occur. Store batteries at
half charge in a dry, cool place, removed from the equipment to
prevent loss of capacity, rusting of metallic parts, and electrolyte
leakage. When storing batteries for one year or longer, the charge
level should be verified at least once a year and charged to half
charge.
Replace the battery when a significant loss of run time is detected.
• Standard warranty period for all Zebra batteries is one year,
regardless if the battery was purchased separately or included
as part of the host device. For more information on Zebra
batteries, please visit: zebra.com/batterydocumentation and
select the Battery Best Practices link.
Battery Safety Guidelines
IMPORTANT – SAFETY INSTRUCTIONS – SAVE
THESE INSTRUCTIONS
WARNING – When using this product basic safety
precautions should always be followed, including the
following:
The area in which the units are charged should be
chemicals. Particular care should be taken where the device is
charged in a non-commercial environment.
clear of debris and combustible materials or
• Read all the instructions before using the product.
• Follow battery usage, storage, and charging guidelines found in
the user's guide.
• Improper battery use may result in a fire, explosion, or other
hazard.
• To charge the mobile device battery, the battery and charger
temperatures must be between 0°C and +40°C
(+32°F and +104°F).
• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any questions
about the compatibility of a battery or a charger, contact Zebra
support.
• Do not disassemble or open, crush, bend or deform, puncture,
or shred. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion, or risk of
injury.
• Severe impact from dropping any battery-operated device on a
hard surface could cause the battery to overheat.
• Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.
• Do not modify, disassemble, or remanufacture, attempt to insert
foreign objects into the battery, immerse or expose to water,
rain, snow or other liquids, or expose to fire, explosion, or other
hazard.
• Do not leave or store the equipment in or near areas that might
get very hot, such as in a parked vehicle or near a radiator or
other heat source. Do not place battery into a microwave oven
or dryer.
• To reduce the risk of injury, close supervision is necessary when
used near children.
• Please follow local regulations to promptly dispose of used
re-chargeable batteries.
• Do not dispose of batteries in fire. Exposure to temperatures
over 100°C (212°F) may cause explosion.
• Seek medical advice immediately if a battery has been
swallowed.
• In the event of a battery leak, do not allow the liquid to come in
contact with the skin or eyes. If contact has been made, wash
the affected area with large amounts of water and seek medical
advice.
• If you suspect damage to your equipment or battery, contact
Zebra support to arrange for inspection.
• Do not use a power pack in excess of its output rating. Overload
outputs may result in risk of fire or injury to persons.
• Have service performed by a qualified Zebra service center.
This will insure safety of the product is maintained.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance
with Directives 2014/53/EU and 2011/65/EU.
Any radio operation limitations within EEA countries are identified
in Appendix A of EU Declaration of Conformity. The full text of the
EU Declaration of Conformity is available at: www.zebra.com/doc.
EU Importer: Zebra Technologies B.V
Address: Mercurius 12, 8448 GX Heerenveen, Netherlands
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life,
please refer to recycling/disposal advice at: zebra.com/weee.
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any
interference received including interference that may cause
undesired operation.
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules.These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Radio Frequency Interference Requirements – Canada
Innovation, Science and Economic Development Canada ICES-003
Compliance Label: CAN ICES-3 (B)/NMB-3(B)
This device complies with Innovation, Science and Economic
Development Canada’s licence-exempt RSSs. Operation is subject
to the following two conditions: (1) This device may not cause
interference; and (2) This device must accept any interference,
including interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l'appareil ne doit pas produire de
brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radio électrique subi même si le brouillage est susceptible
d'en compromettre le fonctionnement.
This device is restricted to indoor use when operating in the 5150 to
5350 MHz frequency range.
Lorsqu'il fonctionne dans la plage de fréquences 5 150- 5350 MHz,
cet appareil doit être utilisé exclusivement en extérieur.
RF Exposure Requirements - FCC and ISED
The FCC has granted an Equipment Authorization for this device
with all reported SAR levels evaluated in compliance with the FCC
RF emission guidelines. SAR information on this device is on file
with the FCC and can be found under the Display Grant section of
fcc.gov/oet/ea/fccid.
To satisfy RF exposure requirements, this device must operate with
a minimum separation distance of 1.5 cm or more from a user's
body and nearby persons.
Pour satisfaire aux exigences d’exposition aux RF, cet appareil doit
fonctionner à une distance minimale de séparation de 1.5 cm ou
plus du corps de l’utilisateur et des personnes à proximité.
Pour satisfaire aux exigences d’exposition aux RF, cet appareil doit
être cheville utilisé manuellement uniquement, le cas échéant,
uniquement utilisé avec les accessoires approuvés et testés par
Zebra.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the
antenna used for this transmitter must not be co-located (within 20
cm) or operating in conjunction with any other transmitter/antenna
except those already approved in this filling.
This device is marked HAC showing compliance with the applicable
requirements of FCC Part 68 and ISED CS-03-Part 5.
日本
Brasil
Este produto está homologado pela Anatel de acordo com os
procedimentos regulamentados para avaliação da conformidade de
produtos para telecomunicações e atende aos requisitos técnicos
aplicados, incluindo os liYDmites de exposição da Taxa de
Absorção Específica referente a campos elétricos, magnéticos e
eletromagnéticos de radiofrequência.
中国
通过访问以下网址可下载当地语言支持的产品说明书
zebra.com/support
如果配套使用外部电源适配器，请确保其已通过 CCC 认证
（一） 符合 “ 微功率短距离无线电发射设备目录和技术要求 ” 的具体
条款和使用场景，采用的天线类型和性能，控制、调整及开关等使用
方法；
（二）不得擅自改变使用场景或使用条件、扩大发射频率范围、加大
发射功率 （包括额 外加装射频功率放大器），不得擅自更改发射
天线；
（三）不得对其他合法的无线电台 （站）产生有害干扰，也不得提出
免受有害干扰保护；
（四）应当承受辐射射频能量的工业、科学及医疗 （ISM）应用设备
的干扰或其他合法的无线电台 （站）干扰；
（五）如对其他合法的无线电台 （站）产生有害干扰时，应立即停止
使用，并采取措施消除干扰后方可继续使用；
（六）在航空器内和依据法律法规、国家有关规定、标准划设的射电
天文台、气象雷达站、卫星地球站 （含测控、测距、接收、导航站）
等军民用无线电台 （站）、机场等的电磁环境保护区域内使用微功率
设备，应当遵守电磁环境保护及相关行业主管部门的规定；
（七）禁止在以机场跑道中心点为圆心、半径 5000 米的区域内使用
各类模型遥控器；
（八）有关支持的工作环境条件，请参阅本指南的最高工作温度以及
电池信息和电源信息部分。
产品中有害物质的名称及含量
有害物质
部件名称 (Parts)
铅 (Pb) 汞 (Hg) 镉 (Cd)
金属部件 X O O O O O
电路模块 X O O O O O
电缆及电缆组件 O O O O O O
塑料和聚合物部件 O O O O O O
光学和光学组件 O O O O O O
电池 X O O O O O
本表格依据SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 SJ/T 11364--2014 规
定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 SJ/T
11364--2014 规定的限量要求。(企业可在此处，根据实际情况对上表中打
“×”的技术原因进行进一步说明。）
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二
苯醚
(PBDE)
Евразийский Таможенный Союз (EAC)
Данный продукт соответствует требованиям знака EAC.
France
Cet appareil a été testé et déclaré conforme aux limites applicables
d'exposition aux radiofréquences (RF).
Le débit d'absorption spécifique (DAS) local quantifie l'exposition de
l'utilisateur aux ondes électromagnétiques de l'équipement
concerné.
Les valeurs DAS les plus élevées sont disponibles sur la déclaration
de conformité (DoC) disponible sur: zebra.com/doc.
México
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su
operación no deseada.
한국
전자파흡수율
본 제품의 전자파흡수율은 과학기술정보통신부의 「전자파
인체보호기준」을 만족합니다 . 본 제품은 국립전파연구원의
「전자파흡수율 측정기준」에 따라 최대 출력 조건에서 머리에
근접하여 시험되었으며 , 최대 전자파흡수율 측정값은 다음과
같습니다 .
모델명 : TC5301
전자파흡수율 (SAR : Specified Absorption Rate) 은 휴대전화를
사용할 때 인체에 흡수될 수 있는 전자파의 양으로 우리나라는
국제권고기준인 2 W/kg 보다 엄격한 1.6 W/kg 기준을 적용하고
있습니다 .
그러나 일상생활에서는 최대출력보다 현저히 낮은 출력 상태에서
통신이 이루어지므로 전자파흡수율은 위 시험 결과보다 매우
낮습니다 .
전자파흢율에 대한 자세한 정보는 국립전파연구원 (www.rra.go.kr)
또는 제조사 홈페이지에서 확인할 수 있습니다 .
臺灣
低功率電波輻射性電機管理辦法
取得審驗證明之低功率射頻器材，非經核准，公司、商號或使用者均
不得擅自變更頻率、加大功率或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合法通信；經發現有
干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電通信。低功率射頻
器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干
擾。
應避免影響附近雷達系統之操作
公司資訊
台灣斑馬科技股份有限公司
限用物質含有情況標示聲明書
設備名稱
單元 Unit
印刷電路板及電子組件 − O O O O O
金屬零件 − O O O O O
電纜及電纜組件 O O O O O O
塑料和聚合物零件 O O O O O O
光學與光學元件 O O O O O O
備考 1. 〝超出0.1 wt % 〞及〝超出 0.01 wt %〞係指限用物質之百分比含
量超出百分比含量基準值。
備考 2.〝 O 〞係指該項限用物質之百分比含量未超出百分比含量基準值。
備考 3. 〝−〞係指該項限用物質為排除項目。
Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the
percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
Note 2: “O” indicates that the percentage content of the restricted substance
does not exceed the percentage of reference value of presence.
Note 3: The “ − ” indicates that the restricted substance corresponds to the
exemption.
/ 台北市信義區松高路 9 號 13 樓
行政院環保署 (EPA) 要求乾電池製造或進口商，
需依廢棄物清理法第 15 條之規定，於販售、贈
送或促銷的電池上標示回收標誌。請聯絡合格的
台灣回收廠商，以正確棄置電池。
型號 （型式）
六價鉻
(Cr+6)
TC5301
多溴聯
(PBB)
多溴二苯
苯
醚
(PBDE)
Restricted substances and its chemical symbols
鉛
(Pb)汞(Hg)鎘(Cd)
限用物質及其化學符號
TÜRK WEEE Uyumluluk Beyanı
EEE Yönetmeliğine Uygundur.
ประเทศไทย
เครื่ องวิทยุ คมนาคมนี้มี อัตราการดู ดกลืนพลั งงานจำเพาะ (Specific
Absorption Rate SAR) อั นเนื่ องมาจากเครื่ องวิ ทยุคมนาคมเท่ ากั บ
• TC5301 0.764 w/kg
ซึ่งสอดคล้องตามมาตรฐานความปลอดภัยต่อสุขภาพของมนุษย์จากการใช้เ
ครื่องวิทยุคมนาคมที่คณะกรรมการกิจการโทรคมนาคมแห่งชาติประกาศกํา
หนด
United Kingdom
Statement of Compliance
Zebra hereby declares that this radio equipment is in
2017 and the Restriction of the Use of Certain Hazardous
Substances in Electrical and Electronic Equipment Regulations
2012.
Any radio operation limitations within UK are identified in Appendix
A of UK Declaration of Conformity.
The full text of the UK Declaration of Conformity is available at:
zebra.com/doc.
UK Importer: Zebra Technologies Europe Limited
Address:
Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8
5XF
compliance with the Radio Equipment Regulations
Warranty
For the complete Zebra hardware product warranty statement, go
to: zebra.com\warranty.
Service Information
Before you use the unit, it must be configured to operate in your
facility's network and run your applications.
If you have a problem running your unit or using your equipment,
contact your facility's Technical or System Support. If there is a
problem with the equipment, they will contact Zebra support at
zebra.com\support.
For the latest version of the guide go to: zebra.com\support.
Software Support
Zebra wants to ensure that customers have the latest entitled
software at the time of device purchase in order to keep the device
operating at peak performance levels. To confirm that your Zebra
device has the latest entitled software available at the time of
purchase, go to zebra.com/support.
Check for the latest software from Support > Products, or search for
the device and select Support > Software Downloads.
If your device does not have the latest entitled software as of your
device purchase date, e-mail Zebra at
entitlementservices@zebra.com and ensure you include the
following essential device information:
• Model number
• Serial number
• Proof of purchase
• Title of the software download you are requesting.
If it is determined by Zebra that your device is entitled to the latest
version of software, as of the date you purchased your device, you
will receive an e-mail containing a link directing you to a Zebra Web
site to download the appropriate software.
Additional Information
For information on using the TC5301, refer to the TC5301 product
guide available at: zebra.com/support.
この デバイ ス と 一緒に販売 さ れ てい る 充電式バ ッ テ リ ーには、 回
収、 処理、 リ サイ ク ルで き る 貴重な 金属やその他の素材が含 まれ て
いま す。 充電式バ ッ テ リ ー パ ッ ク を安全 に廃棄す る方法につい て
は、 最寄 り の リ サイ クル セ ン タ ー にお 問い合わせ く だ さ い。
Loading...