Rechargeable
Li-Ion Battery
Regulatory Guide
MN-004411-01EN-P
May 3, 2022
Zebra Technologies |
3 Overlook Point |
Lincolnshire, IL 60069 USA
zebra.com
ZEBRA and the stylized Zebra head are
trademarks of Zebra Technologies Corp.,
registered in many jurisdictions
worldwide. All other trademarks are the
property of their respective owners. ©
2022 Zebra Technologies Corp. and/or
its affiliates. All rights reserved.
Regulatory Information
This device is approved under Zebra
Technologies Corporation.
This guide applies to the following model
number: BT-000442B
All Zebra devices are designed to be
compliant with the rules and regulations in
the locations they are sold and will be labeled
as required.
Local language translation / Tradução do
idioma local / Übersetzung in die lokale
Sprache / Raduccion de idioma local /
Traduction en langue locale / Prijevod na
lokalni jezik / Traduzione in lingua locale / 現
地語の翻訳 / 현지 언어 번역 / Перевод на
местный язык / 本地語言翻譯 / 本地语言翻译
/ Yerel dil çeviri /Tłumaczenie na język
lokalny: zebra.com/support
Any changes or modifications to Zebra
equipment not expressly approved by Zebra
could void the user’s authority to operate the
equipment.
Declared maximum operating temperature:
50°C
For use only with Zebra approved and UL
Listed mobile devices, Zebra approved, and
UL Listed/Recognized battery packs.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For
more information on the Bluetooth SIG
listing, please visit bluetooth.com.
Regulatory Markings
Regulatory markings subject to certification
are applied to the device signifying the
radio(s) is/are approved for use. Refer to the
Declaration of Conformity (DoC) for details
of other country markings. The DOC is
available at: zebra.com/doc.
Safety in Hospitals and Aircraft
NOTE: Wireless devices transmit
radio frequency energy that may
affect medical electrical equipment
and aircraft’s operation. Wireless
devices should be switched off wherever you
are requested to do so in hospitals, clinics,
healthcare facilities or by airline staff. These
requests are designed to prevent possible
interference with sensitive equipments.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure – Use
Properly
Only operate the device in accordance with
the instructions supplied.
The device complies with internationally
recognized standards covering human
exposure to electromagnetic fields. For
information on international human exposure
to electromagnetic fields, refer to the Zebra
Declaration of Conformity (DoC) at
zebra.com/doc.
For further information on the safety of RF
energy from wireless devices, refer to RF
exposure and assessment standards section
at zebra.com/responsibility.
Batteries and Power Packs
This information applies to Zebra-approved
batteries and power packs containing
batteries.
Battery Information
CAUTION: Risk of explosion if
battery is replaced by an incorrect
type. Dispose of batteries according
to instructions.
Use only Zebra approved batteries.
Accessories which have battery charging
capability are approved for use with the
following battery models:
Model BT-000442B (3.85 VDC, 4680 mAh)
Zebra approved rechargeable battery packs
are designed and constructed to the highest
standards within the industry.
However, there are limitations as to how
long a battery can operate or be stored
before needing replacement. Many factors
affect the actual life cycle of a battery pack
such as heat, cold, harsh environmental
conditions, and severe drops.
When batteries are stored over six months,
some irreversible deterioration in overall
battery quality may occur. Store batteries at
half charge in a dry, cool place, removed
from the equipment to prevent loss of
capacity, rusting of metallic parts, and
electrolyte leakage. When storing batteries
for one year or longer, the charge level
should be verified at least once a year and
charged to half charge.
Replace the battery when a significant loss
of run time is detected.
Standard warranty period for all Zebra
batteries is one year, regardless if the
battery was purchased separately or
included as part of the host device. For more
information on Zebra batteries, please visit:
zebra.com/batterydocumentation and select
the Battery Best Practices link.
Battery Safety Guidelines
IMPORTANT – SAFETY
INSTRUCTIONS – SAVE THESE
INSTRUCTIONS
WARNING – When using this
product basic safety precautions
should always be followed,
including the following:
The area in which the units are charged
should be clear of debris and combustible
materials or chemicals. Particular care
should be taken where the device is charged
in a non-commercial environment.
• Read all the instructions before using the
product.
• Follow battery usage, storage, and
charging guidelines found in the user's
guide.
• Improper battery use may result in a fire,
explosion, or other hazard.
• To charge the mobile device battery, the
battery and charger temperatures must be
between
0°C and +40°C (+32°F and +104°F).
• Do not use incompatible batteries and
chargers. Use of an incompatible battery
or charger may present a risk of fire,
explosion, leakage, or other hazard. If you
have any questions about the compatibility
of a battery or a charger, contact Zebra
support.
• Do not disassemble or open, crush, bend
or deform, puncture, or shred. Damaged or
modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion, or risk of injury.
• Severe impact from dropping any
battery-operated device on a hard surface
could cause the battery to overheat.
• Do not short circuit a battery or allow
metallic or conductive objects to contact
the battery terminals.
• Do not modify, disassemble, or
remanufacture, attempt to insert foreign
objects into the battery, immerse or
expose to water, rain, snow or other
liquids, or expose to fire, explosion, or
other hazard.
• Do not leave or store the equipment in or
near areas that might get very hot, such as
in a parked vehicle or near a radiator or
other heat source. Do not place battery
into a microwave oven or dryer.
• To reduce the risk of injury, close
supervision is necessary when used near
children.
• Please follow local regulations to promptly
dispose of used re-chargeable batteries.
• Do not dispose of batteries in fire.
Exposure to temperatures over 100°C
(212°F) may cause explosion.
• Seek medical advice immediately if a
battery has been swallowed.
• In the event of a battery leak, do not allow
the liquid to come in contact with the skin
or eyes. If contact has been made, wash
the affected area with large amounts of
water and seek medical advice.
• If you suspect damage to your equipment
or battery, contact Zebra support to
arrange for inspection.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this radio
equipment is in compliance with Directives
2014/53/EU and 2011/65/EU.
Any radio operation limitations within EEA
countries are identified in Appendix A of EU
Declaration of Conformity. The full text of the
EU Declaration of Conformity is available at:
zebra.com/doc.
EU Importer: Zebra Technologies B.V
Address: Mercurius 12, 8448 GX
Heerenveen, Netherlands
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the
end of their life, please refer to recycling/disposal
advice at: zebra.com/weee.
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received including interference that
may cause undesired operation.
NOTE: This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules.These limits are
designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try
to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Radio Frequency Interference Requirements – Canada
Innovation, Science and Economic Development
Canada ICES-003 Compliance Label: CAN ICES-3
(B)/NMB-3(B)
This device complies with Innovation, Science and
Economic Development Canada’s licence-exempt
RSSs. Operation is subject to the following two
conditions: (1) This device may not cause
interference; and (2) This device must accept any
interference, including interference that may cause
undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu
dans le présent appareil est conforme aux CNR
d’Innovation, Sciences et Développement
économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes : (1)
l'appareil ne doit pas produire de brouillage, et (2)
l'utilisateur de l'appareil doit accepter tout
brouillage radio électrique subi même si le
brouillage est susceptible d'en compromettre le
fonctionnement.
RF Exposure Requirements - FCC and ISED
The FCC has granted an Equipment Authorization
for this device with all reported SAR levels
evaluated in compliance with the FCC RF emission
guidelines. SAR information on this device is on file
with the FCC and can be found under the Display
Grant section of fcc.gov/oet/ea/fccid.
中国
通过访问以下网址可下载当地语言支持的产品说明
书 zebra.com/support
产品中有害物质的名称及含量
有害物质
多
部件名称
铅 汞 镉
金属部件 O O O O O O
电路模块 X O O O O O
电缆及电缆组件O O O O O O
塑料和聚合
物部件
光学和光学
组件
电池 O O O O O O
外部电源 O O O O O O
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含
量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料
中的含量超出 GB/T 26572 规定的限量要求。(
企业可在此处，根据实际情况对上表中打“×”的
技术原因进行进一步说明。
O O O O O O
O O O O O O
多
六
价
铬
溴
溴
二
联
苯
苯
醚
Евразийский Таможенный Союз (EAC)
Данный продукт соответствует требованиям
знака EAC.
México
La operación de este equipo está sujeta a las
siguientes dos condiciones: (1) es posible que este
equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe
aceptar cualquier interferencia, incluyendo la que
pueda causar su operación no deseada.
臺灣
低功率電波輻射性電機管理辦法
取得審驗證明之低功率射頻器材，非經核准，公
司、商號或使用者均不得擅自變更頻率、加大功率
或變更原設計之特性及功能。
低功率射頻器材之使用不得影響飛航安全及干擾合
法通信；經發現有干擾現象時，應立即停用，並改
善至無干擾時方得繼續使用。
前述合法通信，指依電信管理法規定作業之無線電
通信。低功率射頻器材須忍受合法通信或工業、科
學及醫療用電波輻射性電機設備之干擾。
公司資訊
台灣斑馬科技股份有限公司 / 台北市信義區松高路
9 號 13 樓
行政院環保署 (EPA) 要求乾電
池製造或進口商，需依廢棄物
清理法第 15 條之規定，於販
售、贈
送或促銷的電池上標示回收標
商，以正確棄置電池。
限用物質含有情況標示聲明書
設備名稱
單元 Unit
印刷電路板
及電子組件
金屬零件 O O O O O O
電纜及電纜組件O O O O O O
塑料和聚合
物零件
光學與光學元件O O O O O O
打印頭 O O O O O O
備考 1. 〝超出 0.1 wt % 〞及〝超出 0.01 wt % 〞
係指限用物質之百分比含量超出百分比含量基
準值。
備考 2. 〝 O 〞係指該項限用物質之百分比含量未
超出百分比含量基準值。
備考 3. 〝−〞係指該項限用物質為排除項目。
Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01
wt%” indicate that the percentage content of the
restricted substance exceeds the reference
percentage value of presence condition.
Note 2: “O” indicates that the percentage content of
the restricted substance does not exceed the
percentage of reference value of presence.
Note 3: The “−” indicates that the restricted substance
corresponds to the exemption.
誌。請聯絡合格的台灣回收廠
型號 （型式）
BT-000442B
限用物質及其化學符號
多
六
溴
鉛 汞 鎘
− O O O O O
O O O O O O
價
聯
鉻
苯
多溴
二苯
醚
TÜRK WEEE Uyumluluk Beyanı
EEE Yönetmeliğine Uygundur.
ประเทศไทย
เครื่ องโทรคมนาคมและอุ ปกรณ์นี้
มี ความสอดคล้ องตามข้ อกำหนดของ กทช .
United Kingdom
Statement of Compliance
radio equipment is in compliance with the Radio
Equipment Regulations 2017 and the Restriction of
the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment Regulations
2012.
Any radio operation limitations within UK are
identified in Appendix A of UK Declaration of
Conformity.
The full text of the UK Declaration of Conformity is
available at: zebra.com/doc.
UK Importer: Zebra Technologies Europe Limited
Address: Dukes Meadow, Millboard Rd, Bourne
End, Buckinghamshire, SL8 5XF
Zebra hereby declares that this
Warranty
For the complete Zebra hardware product warranty
statement, go to: zebra.com\warranty.
Service Information
Before you use the unit, it must be configured to
operate in your facility's network and run your
applications.
If you have a problem running your unit or using
your equipment, contact your facility's Technical or
System Support. If there is a problem with the
equipment, they will contact Zebra support at
zebra.com\support.
For the latest version of the guide go to:
zebra.com\support.
Additional Information
For information on using the BT-000442B, refer to
the TC5X/TC7X product guide available at:
zebra.com/support.
Loading...