Zebra PolyE 3100T User Manual
Media Type
Label
Film Type
Polyethylene
Receipt
Polyolefin
Tag
Polypropylene
Wristband
Polyester
Material Type
Paper
Polyimide
Synthetic
Properties
Cold Temperature
Printing
Technology
Direct Thermal
(no Ribbon
Required)
Deep Freeze
Thermal Transfer
(Ribbon Required)
High Temperature
Ultra High
Temperature
Adhesive
Type
Permanent
Removable
High Tack
No Adhesive
Chemical Resistance
-
Finish
Matte
Environment
Indoor
Gloss
Outdoor
PolyE 3100T Gloss
Additional Features
Low cost, topcoated gloss polyethylene label
Good adhesion on a variety of substrates
Good flexibility and conformability for labelling curved surfaces
Pure polyethylene facestock means it is environmentally-friendly and recyclable
Good tear and water resistance properties
Adhesive complies with European food regulation EC 1935/2004, EU 10/2011 and BfR
Recommendation XIV for direct contact with dry, moist and such kind of fatty foodstuffs
which have a reduction factor of at least 3
Adhesive complies with FDA 175.105 for direct contact with dry foodstuffs, or
alternatively separated by a functional barrier
Suggested Applications
Labelling of HDPE bottles and cans e.g. toiletries and food packaging
Work in progress labels
Pallet labelling suitable for recycling with shrink-wrap
Cost effective outdoor labelling for plants, garden and DIY products (approx. 9 months)
Medium-life product and box labelling
Shelf-edge labelling
Gloss materials are not suitable for fanfold applications
©2015 ZIH Corp. All rights reserved.
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdicti ons worldwide. All other trademarks are the property of their respective owners.
REV. 1 - December 2015
Description
Caliper
Facestock
Gloss white topcoated polyethylene film
82 microns
Adhesive
Permanent acrylic adhesive
19 microns
Liner
61gsm glassine liner
54 microns
Total
155 microns ±10%
Recommended Zebra Printers:
Recommended Zebra Ribbons:
Desktop, mid-range and high-performance
thermal printers
3200, 4800, 5095
Minimum Application Temperature:
When the label is applied, the environment and
surface should be above this temperature
5C
Service Temperature Range:
Following correct application and appropriate
dwell time (usually 24hrs) the media will
withstand this temperature range
-20C to 80C
Recommended Storage Conditions:
Storage of product before use
1 year duration when stored at 20C to 25C
at 40 to 50% RH
Expected Life Span in Application:
Following correct application and appropriate
dwell time (usually 24hrs) we expect, but do
not warrant, a life span as indicated
Indoor use, 1 year+
Outdoor use, up to 1 year
Technical Specifications
Product Performance and Suitability
The information contained in this document is to be used for guidance only and is not
intended for use in setting specifications. All purchasers of Zebra products shall be solely
responsible for independently determining if the product conforms to all requirements of
their unique application.
For testing of this material, please order from the ZipShip price list or order sample roll
SAMPLE22700 for mid-range and industrial printers or SAMPLE22700-D for desktop
printers.
©2015 ZIH Corp. All rights reserved.
Zebra and the stylized Zebra head are trademarks of ZIH Corp., registered in many jurisdicti ons worldwide. All other trademarks are the property of their respective owners.
REV. 1 - December 2015
Loading...