Zebra P620 Quick Start & Operator's Manual

P620

Quick Start

&

Operator’s Guide

******************************************************************************

Quick Start

Set-up

1. Unpack your Zebra Card Printer

After unpacking your Zebra Card Printer, make sure the following items are included:

Power Cords
Interface Cables
2 Laminate Cassettes

Card Output Hopper
Printer Driver CD
Documentation CD

Card Weight
Transport Key Tool

If any items are missing, please contact your dealer.

2. Install Card Cleaning Tape

The pink Card Cleaning Tape (packed separately)
must be installed before using the printer. See
page 2-2 in the Media Handling section of the
Operator’s Guide for loading instructions.

3. Install Card Output Hopper

Remove Card Output Hopper from packaging and
hook onto right hand side of printer.

Quick Start.pmd 1-15-04 1-1

4. Loading Printing Ribbon

Open cover and insert Printing Ribbon per Media
Handling instructions on page 2-3 of the
Operator’s Guide.

5. Loading the Top and Bottom Laminate

Remove top and bottom laminate cassettes.
Load laminate into cassettes and place
cassettes back in printer, making sure that
cassettes have been installed properly and
locked into position. See page 2-4 of the
Operator’s Guide.

6. Loading Cards

Place cards in card hopper per Media Handling
instruction on page 2-1of the Operator’s Guide.

7. Window’s Print Driver Set-up

See section 5, Window’s Printer Driver, for
complete instructions on loading your driver.

8. Maintenance

While operating your P620 Card Printer, it is very important to maintain it properly. If
you have any questions about your new Zebra Card Printer, please contact your
dealer, technician, or visit our website at www.cards.zebra.com.

Thank you for choosing a Zebra Card Printer!

Quick Start.pmd 1-15-04 1-2