Zebra ST6056 Omnii ST6056 Hard Shell Holster for Expansion Back English

Installation Instruction ST6056 Hard Shell Holster

1. Installation for left or right hand use

STEP 1.

REMOVE PHILIPS
SCREW ON SIDE
OF HOLSTER

WITH METAL
BAR PINCHED

SLIDE HOLSTER
UP TO REMOVE

PINCH METAL
BAR TOWARD
HOLSTER

STEP 2.

POSITION HOLSTER FACING
OPPOSITE DIRECTION AND
SLIDE METAL BAR INTO SIDE
CHANNEL ON HOLSTER

September 02, 2010

STEP 3. STEP 4.

Page 1 of 2 Part No. 1005241 Revision A

REINSTALL SCREW.
SCREW SHOULD BE TIGHTENED ONE­QUARTER TURN BEYOND FINGER
TIGHT. (OR TORQUE 9.0±1.0 IN-LBS).

DO NOT OVERTIGHTEN.

STEP 5.

FINISHED SETUP

(RIGHT HANDED USERS)

FINISHED SETUP

(LEFT HANDED USERS)

COMPANY HEADQUARTERS AND CANADIAN SERVICE CENT RE

PSION TEKLOGIX
2100 Meadowvale Boulevard, Mississauga
Ontario, Canada L5N 7J9
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]

Page 2 of 2 Part No. 1005241 Revision A