MC93XX
Mobile Computer
User Guide
MN-003525-05 Rev A
Copyright
ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corporation, registered in many
jurisdictions worldwide. Google, Android, Google Play and other marks are trademarks of Google LLC. All other
trademarks are the property of their respective owners. ©2020 Zebra Technologies Corporation and/or its affiliates.
All rights reserved.
COPYRIGHTS & TRADEMARKS: For complete copyright and trademark information, go to www.zebra.com/
copyright.
WARRANTY: For complete warranty information, go to www.zebra.com/warranty
END USER LICENSE AGREEMENT: For complete EULA information, go to www.zebra.com/eula
Terms of Use
• Proprietary Statement
This manual contains proprietary information of Zebra Technologies Corporation and its subsidiaries (“Zebra
Technologies”). It is intended solely for the information and use of parties operating and maintaining the
equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any
other parties for any other purpose without the express, written permission of Zebra Technologies.
• Product Improvements
Continuous improvement of products is a policy of Zebra Technologies. All specifications and designs are
subject to change without notice.
• Liability Disclaimer
Zebra Technologies takes steps to ensure that its published Engineering specifications and manuals are
correct; however, errors do occur. Zebra Technologies reserves the right to correct any such errors and
disclaims liability resulting therefrom.
• Limitation of Liability
In no event shall Zebra Technologies or anyone else involved in the creation, production, or delivery of the
accompanying product (including hardware and software) be liable for any damages whatsoever (including,
without limitation, consequential damages including loss of business profits, business interruption, or loss of
business information) arising out of the use of, the results of use of, or inability to use such product, even if
Zebra Technologies has been advised of the possibility of such damages. Some jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you.
.
.
Revision History
Changes to the original guide are listed below:
Change Date Description
-01 Rev A 03/2019 Initial release.
-02 Rev A 07/2019 Updated to include MC93XX freezer configuration.
-03 Rev A 10/2019 Updated to include SE4750 Direct Part Marking (DPM)/Direct Part Marking - Wide
-04 Rev A 02/2020 Updated Installing a microSD Card section with supported SD cards.
-05 Rev A 03/2020 Changed KeyManager to KeyMappingMgr in the Keypads chapter.
(DPW), SE4770 scanner, and additional keypads.
2
Table of Contents
Copyright ......................................................................................................................... 2
Terms of Use .................................................................................................................. 2
Revision History .............................................................................................................. 2
About This Guide........................................................................................................ 10
Introduction ................................................................................................................... 10
Documentation Set ....................................................................................................... 10
Configurations .............................................................................................................. 11
Software Versions ......................................................................................................... 11
Chapter Descriptions .................................................................................................... 12
Notational Conventions ................................................................................................. 12
Related Documents ...................................................................................................... 13
Service Information ....................................................................................................... 13
Provide Documentation Feedback ................................................................................ 14
Getting Started............................................................................................................ 15
Introduction ................................................................................................................... 15
Unpacking ..................................................................................................................... 15
Device Features ........................................................................................................... 16
Setup ............................................................................................................................ 19
Installing a microSD Card ...................................................................................... 19
Backup Power ....................................................................................................... 24
Charging Temperature .......................................................................................... 24
Charging Spare Batteries ...................................................................................... 24
Google Account Setup .......................................................................................... 24
Zebra Visibility Services ........................................................................................ 25
Replacing the Battery in the Device ...................................................................... 25
Hot Swap Mode ..................................................................................................... 27
Accessing Device Settings .................................................................................... 28
Battery Management ..................................................................................................... 28
3
Table of Contents
Monitoring Battery Usage ...................................................................................... 28
Low Battery Notification ......................................................................................... 29
Battery Optimization .............................................................................................. 29
Real-Time Clock Backup ....................................................................................... 30
Setting the Date and Time ............................................................................................ 30
Display Settings ............................................................................................................ 30
Setting the Screen Brightness ............................................................................... 30
Setting Screen Timeout ......................................................................................... 31
Setting Screen Rotation ........................................................................................ 31
Setting Font Size ................................................................................................... 31
Setting Display Size .............................................................................................. 32
Ambient Display .................................................................................................... 33
Touch Panel Mode ................................................................................................ 33
Keyboard Backlight ............................................................................................... 34
Setting Notification LED ........................................................................................ 35
General Sound Setting .................................................................................................. 35
Wake-Up Sources ......................................................................................................... 36
Using the Device......................................................................................................... 38
Introduction ................................................................................................................... 38
Google Mobile Services ................................................................................................ 38
Home Screen ................................................................................................................ 38
Home Screen ................................................................................................................ 39
Setting Home Screen Rotation .............................................................................. 39
Status Bar .............................................................................................................. 40
Status Icons .................................................................................................... 40
Notification Icons ............................................................................................. 42
Managing Notifications .................................................................................... 42
Setting App Notifications ................................................................................. 43
Viewing Notification Settings for All Apps ....................................................... 44
Controlling Lock Screen Notifications ............................................................. 44
Notification Indicator ....................................................................................... 44
Quick Access Panel ........................................................................................ 44
Editing Icons on Quick Settings ............................................................................. 45
App Shortcuts and Widgets ................................................................................... 46
Adding an App Shortcut to the Home Screen ................................................. 46
Adding a Widget to the Home Screen ............................................................. 46
Moving Items on the Home Screen ................................................................. 47
Removing an App Shortcut or Widget from the Home Screen ....................... 47
Folders .................................................................................................................. 47
Creating a Folder ............................................................................................ 47
Naming Folders ............................................................................................... 47
Removing a Folder .......................................................................................... 48
4
Table of Contents
Home Screen Wallpaper ....................................................................................... 48
Using the Touchscreen ................................................................................................. 48
Keyboards ..................................................................................................................... 49
Virtual Keyboard Configuration ............................................................................. 49
Enabling Virtual Keyboards ............................................................................. 49
Switching Between Virtual Keyboards ............................................................ 49
Physical Keyboard Configuration .......................................................................... 49
Enabling Physical Keyboards ......................................................................... 49
Using the Enterprise Keyboard ............................................................................. 49
Numeric Tab ................................................................................................... 50
Alpha Tab ........................................................................................................ 50
Additional Character Tab ................................................................................ 50
Scan Tab ......................................................................................................... 51
Do Not Disturb Feature ................................................................................................. 51
Limit Sounds and Vibrations ........................................................................... 51
Total Silence ................................................................................................... 51
Alarms Only .................................................................................................... 52
Priority Notifications Only ................................................................................ 52
Silence Sounds During Certain Times ............................................................ 53
Silence Sounds During Events and Meetings ................................................. 53
Turn Sounds Back On ..................................................................................... 53
Override Do Not Disturb for Specific Apps ............................................................ 54
Apps .............................................................................................................................. 54
Accessing Apps ............................................................................................................ 57
Switching Between Recent Apps .......................................................................... 57
Un-Locking the Screen .......................................................................................... 58
Smart Lock ............................................................................................................ 60
Resetting the Device ..................................................................................................... 61
Performing a Soft Reset ................................................................................................ 62
Performing a Hard Reset ....................................................................................... 62
Suspend Mode .............................................................................................................. 62
Transferring Files with a Host Computer via USB ........................................................ 62
Transferring Files .......................................................................................................... 62
Transferring Photos ............................................................................................... 63
Disconnect from the Host Computer ..................................................................... 63
Applications ................................................................................................................ 64
Introduction ................................................................................................................... 64
Battery Manager ........................................................................................................... 64
Heater Control .............................................................................................................. 67
Status .................................................................................................................... 67
Advanced .............................................................................................................. 68
Files ............................................................................................................................. 70
5
Table of Contents
Contacts ....................................................................................................................... 71
Adding a Contact ................................................................................................... 71
Editing Contacts .................................................................................................... 71
Deleting Contacts .................................................................................................. 71
Camera ........................................................................................................................ 72
Taking Photos .............................................................................................................. 73
Taking a Panoramic Photo .................................................................................... 74
Recording Videos .................................................................................................. 74
Photo Settings ....................................................................................................... 75
Rear Camera .................................................................................................. 76
Video Settings ................................................................................................. 76
Rear Camera .................................................................................................. 77
Photos .......................................................................................................................... 78
Working with Albums ...................................................................................... 79
Sharing an Album .................................................................................................. 80
Deleting an Album ........................................................................................... 80
Working with Photos ....................................................................................... 81
Viewing and Browsing Photos ........................................................................ 81
Cropping a Photo ............................................................................................ 81
Setting a Photo as a Contact Icon .................................................................. 82
Sharing a Photo .............................................................................................. 82
Deleting a Photo ............................................................................................. 83
Working with Videos .............................................................................................. 83
Watching a Video ............................................................................................ 83
Sharing a Video .............................................................................................. 83
Deleting a Video .............................................................................................. 83
DataWedge Demonstration .......................................................................................... 84
Scanner Selection ................................................................................................. 85
Sound Recorder ........................................................................................................... 86
PTT Express Voice Client ............................................................................................. 86
PTT Audible Indicators ................................................................................................. 87
PTT Notification Icons ........................................................................................... 87
Enabling PTT Communication ............................................................................... 87
Selecting a Talk Group .......................................................................................... 88
PTT Communication .............................................................................................. 88
Creating a Group Call ..................................................................................... 88
Responding with a Private Response ................................................................... 88
Disabling PTT Express Voice Client Communication ............................................ 89
RxLogger ..................................................................................................................... 90
RxLogger Utility ............................................................................................................ 91
Diagnostic Tool ............................................................................................................ 92
Settings ................................................................................................................. 95
Battery Test Information ........................................................................................ 95
6
Table of Contents
GPS Test Information ............................................................................................ 96
System Test Information ....................................................................................... 96
WLAN Test Information ......................................................................................... 96
WWAN Test Information ........................................................................................ 96
Bluetooth Test Information .................................................................................... 96
Device Central ............................................................................................................. 97
Paging an RS6000 Ring Scanner ................................................................................ 98
Data Capture................................................................................................................ 99
Introduction ................................................................................................................... 99
Integrated Imager .......................................................................................................... 99
Operational Modes ................................................................................................ 99
Laser Scanner ............................................................................................................. 100
RS507/RS507X Hands-Free Imager .......................................................................... 100
RS6000 Bluetooth Ring Scanner ................................................................................ 100
DS3678 Digital Scanner .............................................................................................. 100
Scanning Considerations ............................................................................................ 101
Barcode Capture with Imager ..................................................................................... 101
Barcode Capture with Laser Scanner ......................................................................... 102
Scanning with RS507/RS507X Hands-Free Imager ................................................... 103
Scanning with RS6000 Bluetooth Ring Scanner ......................................................... 105
Scanning with the DS3608 USB Scanner or DS3678 Bluetooth Scanner .................. 106
Pairing the RS507/RS507X/RS6000 Hands-Free Imager .......................................... 107
Pairing Using Near Field Communication ................................................................... 107
Pairing in HID Mode Using Near Field Communication ...................................... 108
Pairing Using Simple Serial Interface (SSI) ......................................................... 109
Pairing Using Bluetooth Human Interface Device ............................................... 110
Pairing a Bluetooth Scanner ................................................................................ 111
Pairing Using Bluetooth Human Interface Device ............................................... 111
DataWedge ......................................................................................................... 112
Enabling DataWedge ................................................................................................. 113
Disabling DataWedge .......................................................................................... 113
Wireless ..................................................................................................................... 114
Introduction ................................................................................................................. 114
Wireless Local Area Networks .................................................................................... 114
Connecting to a Wi-Fi Network ................................................................................... 114
Removing a Wi-Fi Network .................................................................................. 116
Bluetooth ............................................................................................................. 116
Adaptive Frequency Hopping .............................................................................. 116
7
Table of Contents
Security ....................................................................................................................... 117
Bluetooth Profiles ................................................................................................ 117
Bluetooth Power States ....................................................................................... 118
Bluetooth Radio Power ........................................................................................ 118
Enabling Bluetooth ........................................................................................ 118
Disabling Bluetooth ....................................................................................... 119
Discovering Bluetooth Device(s) ................................................................... 119
Changing the Bluetooth Name ............................................................................ 119
Connecting to a Bluetooth Device ................................................................. 119
Selecting Profiles on the Bluetooth Device ......................................................... 120
Unpairing a Bluetooth Device .............................................................................. 120
Using a Bluetooth Headset .................................................................................. 120
Near Field Communications ........................................................................................ 120
Reading NFC Cards ............................................................................................ 121
Sharing Information Using NFC .......................................................................... 122
Cast ..................................................................................................................... 122
Accessories............................................................................................................... 123
Introduction ................................................................................................................. 123
MC93XX Accessories ................................................................................................. 123
1-Slot USB Charge Cradle with Spare Battery Charger ...................................... 127
Charging the Battery ........................................................................................... 128
Charging Temperature .................................................................................. 128
4-Slot Charge Only ShareCradle ............................................................................... 129
Charging the Battery ........................................................................................... 129
Battery Charging in the 4-Slot Charge Only ShareCradle ................................... 130
Charging Temperature .................................................................................. 130
4-Slot Ethernet ShareCradle ...................................................................................... 131
Battery Charging in the 4-Slot Ethernet ShareCradle ......................................... 131
Charging Temperature .................................................................................. 132
4-Slot Spare Battery Charger ..................................................................................... 133
16-Slot Spare Battery Charger .................................................................................... 134
USB Charge/Com Snap-on Cup ................................................................................ 135
Connecting the USB Charge Cable to Device ........................................................... 136
Connecting the USB Charge/Com Snap-on Cup Cable to Host Computer ......... 136
Charging the Device .................................................................................................. 138
Disconnecting the USB Charge/Com Snap-on Cup ............................................ 138
MC93XX Charge Only Adapter .................................................................................. 140
Charge Only Adapter Installation ........................................................................ 141
Rubber Boot ............................................................................................................... 143
Installing the Hand Strap ............................................................................................ 145
Un-powered Forklift Mount ......................................................................................... 146
8
Table of Contents
Maintenance and Troubleshooting ......................................................................... 148
Introduction ................................................................................................................. 148
Maintaining the Device ................................................................................................ 148
Battery Safety Guidelines ........................................................................................... 148
Cleaning Instructions .................................................................................................. 149
Approved Cleanser Active Ingredients ................................................................ 149
Harmful Ingredients ............................................................................................. 149
Device Cleaning Instructions ............................................................................... 150
Special Cleaning Notes ....................................................................................... 150
Cleaning Materials Required ............................................................................... 150
Cleaning Frequency ............................................................................................ 150
Cleaning the Device ............................................................................................ 150
Housing ......................................................................................................... 150
Display .......................................................................................................... 150
Exit Window .................................................................................................. 151
Cleaning Battery Connectors .............................................................................. 151
Cleaning Cradle Connectors ............................................................................... 151
Troubleshooting .......................................................................................................... 152
MC93XX .............................................................................................................. 152
Specifications............................................................................................................ 155
Introduction ................................................................................................................. 155
MC93XX Technical Specifications ...................................................................... 155
Keypads..................................................................................................................... 159
Introduction ................................................................................................................. 159
Removing and Replacing Keypads ............................................................................. 159
58-Keys Alpha Numeric Function Keypad ................................................................. 163
53-Keys Standard Keypad ......................................................................................... 166
53-Keys IBM-5250 Emulator Keypad ......................................................................... 169
53-Keys IBM-3270 Emulator Keypad ......................................................................... 172
53-Keys VT Emulator Keypad ............................................................................. 175
43-Keys Shifted Alpha Keypad .................................................................................. 178
34-Keys Numeric Keypad .......................................................................................... 181
29-Keys Shifted Alpha Keypad .................................................................................. 184
Keypad Special Functions ......................................................................................... 187
Special Characters ..................................................................................................... 188
Index........................................................................................................................... 190
9
About This Guide
Introduction
This guide provides information about using the MC93XX mobile computer and accessories.
NOTE: Screens pictured in this guide are samples and can differ from actual screens.
Documentation Set
The documentation set provides information for specific user needs, and includes:
• MC93XX Quick Start Guide - describes how to get the device up and running.
• MC93XX User Guide - describes how to use the device.
• MC93XX Integrator Guide - describes how to set up the device and accessories.
• MC93XX Regulatory Guide - provides all regulatory, service, and EULA information for the device.
10
Configurations
MC93XX used in this guide refers to all configurations, except where noted. MC93XX refers to the Trigger
configuration.
This guide covers the following configurations:
Table 1 Configurations
About This Guide
Configuration Radios Display Memory
MC93XX–G Base WLAN: IEEE 802.11
a/b/g/n/ac/d/h/i/r/w
WPAN: Bluetooth v5.0
Low Energy
Package 1
MC93XX–G Base +
NFC (Tap to Pair) +
Vibrator Motor
Package 2
Package 1 +
Front and Rear
Facing Cameras
MC93XX-G Freezer +
NFC (Tap to Pair) +
Vibrator Motor
WLAN: IEEE 802.11
a/b/g/n/ac/d/h/i/r/w
WPAN: Bluetooth v5.0
Low Energy
WLAN: IEEE 802.11
a/b/g/n/ac/d/h/i/r/w
WPAN: Bluetooth v5.0
Low Energy
WLAN: IEEE 802.11
a/b/g/n/ac/d/h/i/r/w
WPAN: Bluetooth v5.0
Low Energy
4.3" WVGA (800
x 480) LCD
4.3" WVGA (800
x 480) LCD
4.3" WVGA (800
x 480) LCD
4.3" WVGA (800
x 480) LCD.
Optically Bonded
to the Touch
Panel.
4 GB RAM /
32 GB Flash
4 GB RAM /
32 GB Flash
4 GB RAM /
32 GB Flash
4 GB RAM /
32 GB Flash
Data Capture
Options
SE965 1D,
SE4750-SR 2D,
SE4850-ER 2D
SE4750DPM
SE4750DPW
SE4770 2D
SE965 1D,
SE4750-SR 2D,
SE4850-ER 2D
SE4750DPM
SE4750DPW
SE4770 2D
SE965 1D,
SE4750-SR 2D,
SE4850-ER 2D
SE4770 2D
SE965 1D,
SE4750-SR 2D,
SE4850-ER 2D
SE4770 2D
Operating
System
Android-based
GMS 8.1.0
Android-based
GMS 8.1.0
Android-based
GMS 8.1.0
Android-based
GMS 8.1.0
Software Versions
To determine the current software versions:
1. Swipe down from the Status bar to open the Quick Settings bar.
2. Touch > System.
3. Touch About phone.
11
4. Scroll to view the following information:
• Status
• Battery information
• SW components
• Legal information
• Model
• Android version
• Android security patch level
• Kernel version
• Build Fingerprint
• Build number.
To determine the device serial number, touch About phone > Status.
• Serial number
Chapter Descriptions
About This Guide
Topics covered in this guide are as follows:
• Getting Started provides information on getting the device up and running for the first time.
• Using the Device provides basic instructions for using the device with Android OS, including powering on
and resetting the device.
• Applications describes the applications installed on the device.
• Data Capture provides information for capturing barcode data using the internal scanner and optional scan
modules and Bluetooth scanner.
• Wireless provides information on the various wireless options.
• Accessories describes the available accessories and how to use them with the device.
• Maintenance and Troubleshooting includes instructions on cleaning and storing the device, and provides
troubleshooting solutions for potential problems during device operation.
• Specifications provides the technical specifications for the device.
• Keypads provides keypad descriptions and special character generation tables.
Notational Conventions
The following conventions are used in this document:
• Bold text is used to highlight the following:
• Dialog box, window and screen names
• Drop-down list and list box names
• Check box and radio button names
• Icons on a screen
• Key names on a keypad
• Button names on a screen.
12
• Bullets (•) indicate:
• Action items
• Lists of alternatives
• Lists of required steps that are not necessarily sequential.
• Sequential lists (for example, those that describe step-by-step procedures) appear as numbered lists.
Related Documents
• MC93XX Mobile Computer Quick Start Guide, p/n MN-003413-xx
• MC93XX Regulatory Guide, p/n MN-003409-xx
• MC93XX Mobile Computer Integrator Guide, p/n MN-003445-xx
• RS507/RS507X Hands-free Imager Product Reference Guide, p/n 72E-12082-xx
• DS36X8 Product Reference Guide, p/n MN-002689-xx
• RS6000 User Guide, MN-002704-xx
• DS2278 Digital Scanner Product Reference Guide, p/n, MN-002915-xx.
About This Guide
For the latest version of this guide and all guides, go to: http://www.zebra.com/support
Service Information
If you have a problem with your equipment, contact Customer Support for your region. Contact information is
available at: www.zebra.com/support.
When contacting support, please have the following information available:
• Serial number of the unit (found on manufacturing label)
• Model number or product name (found on manufacturing label)
• Software type and version number
Customer Support responds to calls by email or telephone within the time limits set forth in support
agreements.
If the problem cannot be solved by Customer Support, you may need to return the equipment for servicing and
will be given specific directions. We are not responsible for any damages incurred during shipment if the
approved shipping container is not used. Shipping the units improperly can possibly void the warranty.Remove
the microSD card from the device before shipping for service.
If the device was purchased from a business partner, contact that business partner for support.
If the manufacturing label is worn or missing, use an NFC enabled device to read the NFC tag under the
battery compartment. You can download the NFC Reader application for free from the Google Play store.
.
13
About This Guide
Figure 1 Manufacturing Label Location
Manufacturing Label
NFC Tag (Inside the battery compartment.)
NFC Symbol
Provide Documentation Feedback
If you have comments, questions, or suggestions about this guide, send an email to
EVM-Techdocs@zebra.com
.
14
Getting Started
Introduction
This chapter provides the features of the device and explains how to set it up for the first time.
Unpacking
Carefully remove all protective material from the device and save the shipping container for later
storage and shipping.
Verify the following items are in the box:
• Device
• Lithium-ion battery
• Regulatory Guide.
Inspect the equipment for damage. If any equipment is missing or damaged, contact the Zebra
Support Center immediately.
15
Device Features
Figure 2 MC93XX Front View
1
2
Getting Started
13
12
11
10
3
4
5
6
7
Table 2 MC93XX Features - Front View
Number Item Function
1 Ambient Light
Controls display and keyboard backlight.
Sensor
2 Front Facing
Use to take photos and videos.
Camera
NOTE: The front camera is available only on the premium configurations.
3 Display Displays all information needed to operate the device.
4 Speaker Side
Provides audio output for video and music playback.
Port
5 Trigger Initiates data capture when a scan application is enabled.
6 P1 - Dedicated
Initiates push-to-talk communications (programmable).
PTT Key
7 Battery Release
Releases the battery from the device.
Latch
NOTE: To release the battery, simultaneously press the battery release latches
on both the sides of the device.
9
8
16
Getting Started
Table 2 MC93XX Features - Front View (Continued)
Number Item Function
8 Battery Provides power for operating the device.
9 Microphone Use for communications in Handset mode.
10 Keypad Use to enter data and navigate on screen functions.
11 Power Button Press and hold to turn on the device. Press to turn on or off the screen.
Press and hold to select one of these options:
Power off - Turn off the device.
Restart - Restart the device when software stops responding.
12 Center Scan
Button
13 Charger/Decode
Status LED
Figure 3 MC93XX Back View
Initiates data capture when a scan application is enabled.
Indicates battery charging status while charging, app generated
notifications, and data capture status.
15
14
16
20
19
18
17
17
Getting Started
Table 3 MC93XX Features - Back View
Number Item Function
14
Passive NFC Tag
(Inside the battery
compartment.)
Provides secondary product label information (configuration, serial
number and manufacture data code) in the event that the readable
product label is worn or missing.
15 Battery Release
Releases the battery from the device.
Latch
16 Side Speaker Port Provides audio output for video and music playback.
17 Scanner Exit
Provides data capture using the scanner/imager.
Window
18 Camera Flash Provides illumination for the camera.
NOTE: Camera is available only on some configurations.
19 NFC Antenna Provides communication with other NFC-enabled devices.
NOTE: NFC antenna is available only on the premium configurations.
20 Rear Camera Takes photos and videos.
NOTE: The rear camera is available only on the premium configurations.
18
Setup
To start using the device for the first time:
• Install a microSD card (optional)
• Install the battery
• Charge the device
• Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the keypad module.
Refer to the documentation provided with the card for more information, and follow the manufacturer’s
recommendations for use. It is strongly recommended that prior to use, you must format the microSD card on
the device.
NOTE: The following microSD cards were tested and are validated for use with the MC93XX:
• SanDisk 16GB (SDSDQ-016G-A11M)
• SanDisk 32GB (SDSDQ-032G-A11M)
• SanDisk 64GB (SDSDQUA-064G-U46A)
• SanDisk 128GB (SDSDQUI-128G-A46)
• SanDisk 200GB (SDSDQUAN-200G-A4A).
Getting Started
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card. Proper ESD pre-
cautions include, but are not limited to, working on an ESD mat and ensuring that the operator is properly grounded.
1. Power off the device.
2. Remove the battery.
3. Using a Torx T8 screwdriver with a large grip, remove the two keypad latch screws from inside the battery
slot.
Figure 4 Remove Keypad Latch Screws
Keypad Latch Screws
19
Getting Started
4. Slide the keypad latches toward the bottom of the device.
Figure 5 Release Keypad Latches
Screwdriver
Keypad Latches
NOTE: If the keypad latches are hard to move, use a screwdriver to gently slide them towards the bottom of the device.
5. Turn the device over so that the keypad is visible.
6. Using a Torx T8 screwdriver with a large grip, remove the two keypad assembly screws from the top of the
keypad.
Figure 6 Remove Keypad
Keypad Screws
Keypad
microSD Card Holder
20
Getting Started
7. Lift the keypad from the device.
8. Slide the microSD card holder to the Open position.
Figure 7 Open microSD Card Holder
9. Lift the microSD card holder.
Figure 8 Lift microSD Card Holder
10.Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on each
side of the door.
Figure 9 Insert microSD Card into Holder
21
Getting Started
11.Close the microSD card holder door and slide the door to the Lock position.
Figure 10 Close and Lock microSD Card in Holder
12.Align the keypad along the bottom ridge of the device, and then lay it flat.
Figure 11 Replace Keypad
22
Getting Started
13.Using a Torx T8 screwdriver with a large grip and a long shaft, secure the keypad to the device using the
two screws. Torque screws to 5.8 kgf-cm or 5.0 lbf-in.
Figure 12 Replace Keypad Screws
Keypad Screws
14.Turn the device over so that the keypad latches are visible.
15.Slide both the keypad latches toward the top of the device.
Figure 13 Slide Keypad Latches
Keypad Latches
23
Getting Started
16.Using a Torx T8 screwdriver, replace the two keypad latch screws inside the battery slot and torque to 5.8
kgf-cm or 5.0 lbf-in.
Figure 14 Replace Keypad Latch Screws
Keypad Latch Screws
17.Insert the battery.
18.Press and hold the Power key to power on the device.
Backup Power
The device is equipped with a super-capacitor (supercap) to provide backup power to the device when the
main battery is removed. The supercap will retain random access memory (RAM) data in memory for
approximately five minutes after the main battery is removed during Hot Swap.
IMPORTANT: The supercap is automatically charged from the main battery and requires approximately fifteen
minutes to fully charge.
Charging Temperature
Charge batteries in temperatures from 0°C to 40°C (32°F to 104°F). The device or cradle always performs
battery charging in a safe and intelligent manner. At higher temperatures, for example at approximately +37°C
(+98°F), the device or cradle may for small periods of time alternately enable and disable battery charging to
keep the battery at acceptable temperatures. The device and cradle indicates when charging is disabled due to
abnormal temperatures via its LED.
Charging Spare Batteries
See the Accessories section for information on using accessories to charge spare batteries.
Google Account Setup
NOTE: You must connect the device to the internet in order to set up a Google™ account.
A Google account is only required on devices with GMS software.
24
The first time the device starts, the Setup Wizard displays. Follow the on-screen instructions to set up a Google
account, configure Google Pay
information, and enable backup or restore features.
Zebra Visibility Services
The device captures and provides device analytics to a system administrator. The first time the device boots
(or after a Factory reset), the Zebra Services agreement screen displays.
Figure 15 Zebra Services
Getting Started
™ for purchasing items from the Google Play ™ store, to enter your personal
1. Touch the Device Data switch to disable the device from sending analytics data. Zebra recommends
keeping this option enabled.
2. Touch OK.
Replacing the Battery in the Device
To replace the battery:
1. Push in the two primary Battery Release buttons.
The battery ejects slightly. With Hot Swap mode, when you remove the battery, the display turns off and the
device enters a low power state. The device retains RAM data for approximately five minutes. Replace the
battery within five minutes to preserve memory persistence.
25
Getting Started
Figure 16 Primary Battery Releases
2. Push in the secondary battery release buttons on the sides of the battery.
Figure 17 Secondary Battery Releases
3. Remove the battery from the battery slot.
Figure 18 Remove Battery
26
Getting Started
4. Align the battery with the battery slot.
Figure 19 Inserting the Battery
5. Push the battery into the battery slot.
6. Press battery firmly into the battery well. Ensure that both the battery release buttons on the sides of the
device return to the home position. You will hear an audible click sound indicating that both the battery
release buttons on the sides of the device have returned to the home position locking the battery in place.
Figure 20 Press Battery In
7. Press the Power button to turn on the device.
Hot Swap Mode
The device provides a Hot Swap mode where you can replace the battery without powering off the device.
When you remove the battery, the display turns off and the devices enters the Hot Swap mode. WLAN and
Bluetooth connectivity are retained for the first 30 seconds (indicated by a flashing amber LED). After 30
seconds, the device enters a critical suspend mode with RAM data persistence for approximately 5 minutes. In
the critical suspend mode, WLAN and Bluetooth radios are disabled and will only resume if you insert a battery
with sufficient charge into the device.
CAUTION: To prevent damage to the device, DO NOT perform a hot swap during a device boot up session.
IMPORTANT: The supercap requires time to recharge after performing a Hot Swap or after the main battery is
fully depleted. It can take up to 15 minutes to fully charge the supercap. Hot Swap mode will not retain data
27
unless the supercap is fully charged.
Accessing Device Settings
To access device settings:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. On the Home screen, swipe up from the bottom of the screen and touch .
Battery Management
NOTE: Prior to checking the battery charge level, remove the device from any AC power source (cradle or cable).
To check the charge status of the main battery, open Settings and touch System > About phone > Battery
Information.
Battery present status indicates if the battery is present and Battery level lists the battery charge (as a
percentage of fully charged). The battery percentage can also be viewed next to the battery icon in the quick
access panel. Swipe down with two fingers from the status bar to open the quick access panel.
Getting Started
Monitoring Battery Usage
The Battery screen provides battery charge details, power management options, and a list of apps that
consume the most battery power.
Use the power management options to extend battery life, or touch an app to display details about its power
consumption. Different apps display different information. Some apps include buttons that open screens with
settings to adjust power use. Use the DISABLE or FORCE CLOSE buttons to turn off apps that consume too
much power.
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Battery.
28
Figure 21 Battery Screen
Getting Started
Low Battery Notification
When the battery state of charge drops below 15% on the standard battery and 30% on the freezer battery, a
notification displays indicating a low battery. The battery status icon changes to . You must either replace or
charge the battery using one of the charging accessories.
When the battery state of charge drops below 9% on the standard battery and 20% on the freezer battery, a
notification displays indicating a very low battery. The battery status icon changes to . You must either
replace or charge the battery using one of the charging accessories.
When the battery state of charge drops below 6% on the standard and freezer batteries, the device goes into
critical suspend mode to retain data. The screen turns off. You must replace the battery or charge the device
using one of the charging accessories to retain data.
NOTE: If you place a device with a deeply discharged battery on a device charger, the battery has to pre-charge to an op-
erational voltage level before the device can resume operation. This is indicated via the blinking amber LED. You must avoid
deeply discharging the battery as it can reduce the overall battery health.
Battery Optimization
Observe the following battery saving tips:
• Set the screen to turn off after a short period of non-use.
• Reduce screen brightness.
• Turn off all wireless radios when not in use.
• Turn off automatic syncing for Email, Calendar, Contacts, and other apps.
• Minimize use of apps that keep the device from suspending, for example, music and video apps.
29
Real-Time Clock Backup
The device provides a Real-time Clock (RTC) backup feature. The device saves the system time at regular
intervals to a backup file in persistent storage.
If the system time is not the latest when the device re-boots, the device uses the time from the backup file to
update the RTC. Wi-Fi authentication certificates are validated using the restored time. Using the correct time
from the Wi-Fi network, the system time and the RTC are updated.
Setting the Date and Time
You are only required to set the time zone or set the date and time if the wireless LAN does not support
Network Time Protocol (NTP).
To set the date and time:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch System > Date & time.
3. Touch Automatic date & time to disable automatic date and time synchronization.
Getting Started
4. Touch Update Interval.
5. Select the interval time to synchronize your device time from the network.
6. Touch Set date.
7. In the calendar, set today’s date.
8. Touch OK.
9. Touch Set time.
10.Touch the green circle, drag to the current hour and then release.
11.Touch the green circle, drag to the current minute and then release.
12.Touch AM or PM.
13.Touch OK.
14.Touch Select time zone.
15.Select the current time zone from the list.
16.Touch Use 24-hour format.
17.Touch .
Display Settings
Use Display settings to change the screen brightness, enable night light, change the background image,
enable screen rotation, control the keyboard backlight, set sleep time, and change font size.
Setting the Screen Brightness
To manually set the screen brightness using the touchscreen:
30
1. Swipe down with two fingers from the Status bar to open the Quick Access panel.
2. Slide the icon to adjust the screen brightness level.
Figure 22 Brightness Slider
To manually set the screen brightness using the keypad see Keypad Special Functions.
Setting Screen Timeout
To set the screen sleep time:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Display > Sleep.
3. Select one of the sleep values.
• 15 seconds
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 30 minutes (default)
• Never
Getting Started
4. Touch .
Setting Screen Rotation
By default, screen rotation is disabled.
To enable screen rotation:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Display > Advanced.
3. Touch Auto-rotate screen.
NOTE: To change the Home screen rotation, see Setting Home Screen Rotation.
4. Touch .
Setting Font Size
To set the size of the font in system apps:
1. Swipe down from the Status bar to open the Quick Settings panel and then touch .
31
2. Touch Display > Advanced.
3. Touch Font size.
Figure 23 Font Settings
Getting Started
4. Select one of the font size values.
• Small
• Default
• Large
• Largest.
5. Touch .
Setting Display Size
By default, display size is set to default.
To change the display size:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Display > Advanced.
3. Touch Display size.
4. Touch - and + to change the display size.
• Small
• Default
• Large.
5. Touch .
32
Ambient Display
The Ambient display setting wakes the screen when notifications are received.
To disable ambient display:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Display > Advanced.
3. Touch Ambient display.
4. In the When to show section, enable or disable an option using the switch.
5. Touch .
Touch Panel Mode
The device display is able to detect touches using a finger, a conductive-tip stylus, or gloved finger.
NOTE: A glove can be made of medical latex, leather, cotton, or wool.
For optimal performance use a Zebra certified stylus.
Getting Started
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Display > Advanced.
3. Touch Touch panel mode.
Figure 24 Touch Panel Mode Dialog Box
4. Select:
a. Glove and Finger (Screen Protector off) to use a finger or a gloved finger on the screen without a
screen protector.
b. Stylus and Finger (Screen Protector off) to use a finger or a stylus on the screen without a screen
protector.
c. Finger Only to use a finger on the screen.
d. Glove and Finger (Screen Protector on) to use a finger or a gloved finger on the screen with a screen
protector.
e. Stylus and Finger (Screen Protector on) to use a finger or a stylus on the screen with a screen
protector.
5. Touch .
33
Keyboard Backlight
To manually set the keyboard backlight brightness and timeout using the touchscreen:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Display > Advanced.
3. Touch Keyboard backlight.
Figure 25 Keyboard Light
Getting Started
4. Touch Keyboard light level, and then slide the icon to adjust the brightness level.
Figure 26 Brightness SliderLight
5. Touch Keyboard light timeout and select one of the timeout values.
• 6 seconds (default)
• 10 seconds
• 15 seconds
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes
• Always on
6. By default, Adaptive keyboard brightness is enabled, touch the switch to enable the device to automatically
adjust the display backlight based on ambient lighting condition.
NOTE: If you use the keyboard keys to adjust the keyboard backlight, the system disables Automatic Keyboard backlight
adjustments.
7. Touch .
34
Setting Notification LED
The Charging/Notification LED lights blue when an application, such as email and VoIP, generates a
programmable notification or to indicate when the device is connected to a Bluetooth device. By default, LED
notifications are enabled. To change the notification setting:
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Apps & notifications > Notifications.
3. Touch Blink light to toggle the notification on or off.
4. Touch .
General Sound Setting
Use the Sound settings to configure media and alarm volumes.
To access sound settings:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
Getting Started
2. Touch Sound.
3. Touch an option to set sounds.
Figure 27 Sound Screen
• Zebra volume controls
• Ring volume - Controls the ringtone volume.
• Media volume - Controls the music, games, and media volume.
• Alarm volume - Controls the alarm clock volume.
• Notifications volume - Controls the notification volume.
• Scanner volume - Controls the scanner volume.
• Volume presets
• - Mutes the ring, notifications, and scanner so that the device does not make sounds or vibrate.
• - All sounds except media and alarms are silenced and vibrate mode is active.
35
Getting Started
• - Enables all sounds at the user defined levels.
• Do Not Disturb preferences - Mutes some or all sounds and vibrations.
• Priority only allows - Use to set the priorities for the following:
• Reminders - Switch on or off.
• Events - Switch on or off.
• Alarms - This is always enabled.
• Block visual disturbances
• Block when screen is on - This option prevents notifications from displaying over the screen
(peeking) while you are actively using the device.
• Block when screen is off - This option prevents notifications from turning on the screen or pulsing
the LED light when a new notification is received while you are not using the device.
• Automatic rules - Choose when to automatically silence the device. Touch a default rule, such as
Weekend or Weeknight, or create your own rule. To create your own rule, tap Add more and then Time
rule.
• Phone ringtone - Touch to select a sound to play when the phone rings.
• Advanced - Touch to display advanced sound options.
• Default notification sound - Touch to select a sound to play for all system notifications.
• Default alarm sound - Touch to select a sound to play for alarms.
• Other sounds and vibrations
• Screen locking sounds - Play a sound when locking and unlocking the screen (default – enabled).
• Charging sounds - Not applicable.
• Touch sounds - Play a sound when making screen selections (default – enabled).
• Vibrate on tap - Vibrate the device when making screen selections (default – disabled).
• Key press sounds - Play a sound when making keyboard button selections (default – disabled)
NOTE: You can adjust the sound volume which is set at a default of 50% for the key press. Go to Settings > System >
Languages & input > Physical keyboard > Volume on keypress, and set the volume as required.
• Emergency alerts - Touch to configure emergency broadcast settings and notifications.
Wake-Up Sources
By default the device wakes from suspend mode when you press the power button. You can configure the
device to wake when you press the PTT or Scan buttons on the left side of the device.
The P1 key only wakes the unit in its default configuration (when it acts as the PTT key). The SCAN key (if
enabled), and the Grip Trigger will wake the unit from suspend for all key mappings.
NOTE: The P2 can be mapped as a trigger key and can act as a wake-up source. However, if it is mapped to something
else, the P2 key will not wake the device.
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Wake-Up Sources.
36
Getting Started
Figure 28 Wake-Up Sources
3. Touch one or more of the options:
• By default P1 is enabled. Touch P1 check box to disable the right scan button.
• Touch SCAN check box to enable the right scan button. A check appears in the check box.
• By default GRIP_TRIGGER is enabled. Touch GRIP_TRIGGER check box to disable the left scan
button.
4. Touch .
37
Using the Device
Introduction
This chapter describes the screens, status and notification icons, and controls on the device, and
provides basic instructions for using the device.
Google Mobile Services
NOTE: This section applies to Google Mobile Services (GMS) devices only.
Devices with GMS contain apps and services that provide additional functionality.
GMS includes:
• Apps - GMS adds a variety of Google apps and associated widgets including Chrome, Gmail,
Drive, and Maps.
• Services:
• Speech to Text - Allows for free format speech to text in many languages for both connected
and disconnected network. Launch by touching the microphone icon on the keyboard.
• TalkBack Service - Provides spoken feedback on various parts of the user interface. To enable,
go to Settings > Accessibility.
• Network Location Provider - Adds a location provider which uses mobile network tower
information and Wi-Fi access point information to provide a location without using GPS. To
enable, go to Settings > Security & location > Location.
• Widevine DRM - Enables Digital Rights Management (DRM) so that protected streaming video
content can be played. Enable DRM Info from the Google Play
• Google Cloud Messaging - Allows the device to receive data from the server and other devices
on the same connection.
• Backup and Restore - Allows the users settings and apps to be backed up to a Google server
and subsequently restored from that server after a factory reset.
• Google Accounts - Create and use a Google account to synchronize mail, files, music, photos,
contacts and calendar events.
™ store.
Home Screen
Turn on the device to display the Home screen. Depending on the configuration, the Home screen may
appear different. Contact your system administrator for more information.
38
After a suspend or screen time-out, the Home screen displays with the lock slider. Touch the screen and slide
up to unlock. For screen locking information, see Un-Locking the Screen.
The Home screen provides additional screens for placement of widgets and shortcuts. Swipe the screen left or
right to view the additional screens.
Home Screen
1
2
3
Using the Device
4
5
The Home screen consists of the following:
Table 4 Home Screen Items
Item Description
1 — Status Bar Displays the time, status icons (right side), and notification icons (left side). For
2 — Widgets Launches stand-alone applications that run on the Home screen. See App
3 — Folder Contains apps.
4 — Shortcut Icons Opens applications installed on the device. See App Shortcuts and Widgets for
7
6
more information see Status Bar and Managing Notifications.
Shortcuts and Widgets for more information.
more information.
8
5 — Back Displays the previous screen.
6 — Home Displays the Home screen.
7 — Recent Button Displays recently used applications.
8 — All Apps Icon Opens the APPS window.
Setting Home Screen Rotation
By default the Home screen rotation is disabled.
39
Using the Device
To enable Home screen rotation:
1. Touch and hold anywhere on the Home screen until the options appear.
2. Touch HOME SETTINGS.
3. Touch the Allow Home screen rotation switch.
4. Touch .
5. Rotate the device.
Figure 29 Rotated Home Screen
Status Bar
The Status bar displays the time, notification icons (left side), and status icons (right side).
NOTE: Some Status icons may not appear in the Status bar if there are too many icons to display.
Figure 30 Notification and Status Icons
If there are more notifications than can fit in the Status bar, two dots display indicating that more notifications
exist. Swipe down from the Status bar to open the Notification panel and view all notifications and status.
Status Icons
Table 5 Status Icons
Icon Description
Notification Icons
Alarm is active.
Status Icons
Main battery is fully charged.
Main battery is partially drained.
40
Using the Device
Table 5 Status Icons (Continued)
Icon Description
Main battery charge is low.
Main battery charge is very low.
Main battery is charging.
All sounds, except media and alarms, are silenced and vibrate mode is active.
Do Not Disturb mode active.
Airplane Mode is active. All radios are turned off.
Bluetooth is on.
The device is connected to a Bluetooth device.
Connected to a Wi-Fi network.
Not connected to a Wi-Fi network or no Wi-Fi signal.
Connected to an Ethernet network.
Speakerphone enabled.
Indicates that the Orange key is locked.
Indicates that the Blue key is pressed.
Indicates that the Blue key is locked.
Indicates that the ALT key is pressed.
Indicates that the CTRL key is pressed.
Indicates that the Shift key is pressed.
Indicates that the Shift key is locked.
Indicates that the Large Key Indicator is selected.
NOTE: To enable the large key indicator, go to Settings > Accessibility > Display > Large Key Indicator.
Indicates that the Blue Key and SHIFT key are pressed enabling CAPSLOCK.
41
Using the Device
Notification Icons
Table 6 Notification Icons
Icon Description
Main battery is low.
More notifications are available for viewing.
Data is syncing.
Indicates an upcoming event. GMS devices only.
Open Wi-Fi network is available.
Song is playing.
Problem with sign-in or sync has occurred.
Device is uploading data.
Device is downloading data when animated and download is complete when static.
Device is connected to or disconnected from virtual private network (VPN).
Preparing internal storage by checking it for errors.
USB debugging is enabled on the device.
Indicates that RxLogger app is running.
Indicates the Bluetooth scanner is connected to the device.
Indicates the RS6000 is connected to the device in HID mode.
Managing Notifications
Notification icons report the arrival of new messages, calendar events, alarms, and ongoing events. When a
notification occurs, an icon appears in the Status bar with a brief description. See Notification Icons for a list of
possible notification icons and their description. Open the Notification panel to view a list of all the notifications.
To open the Notification panel, drag the Status bar down from the top of the screen.
42
Figure 31 Notification Panel
Using the Device
To respond to a notification, open the Notification panel and then touch a notification. The Notification panel
closes and the corresponding app opens.
To clear all notifications, open the Notification panel and then touch CLEAR ALL. All event-based notifications
are removed. Ongoing notifications remain in the list.
To close the Notification panel, swipe the Notification panel up.
Setting App Notifications
To set notification settings for a specific app:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Apps & notifications > Notifications > App notifications.
3. Select an app.
4. Select an available option:
• On / Off - Select to turn all notifications from this app On (default) or Off.
• Allow notification dot - Do not allow this app to add a notification dot to the app icon.
• Allow interruptions - Do not allow notifications from this app to make sound, vibrate, or pop
notifications on the screen.
• Override Do Not Disturb - Allow these notifications to interrupt when Do Not Disturb is set to Priority
Only.
• Categories - Do not allow specific types of notifications from this app.
• Additional settings in the app - Open the app settings.
NOTE: To change the notification settings for an app, slide the notification slightly left or right and touch .
43
Using the Device
Viewing Notification Settings for All Apps
To view the notification settings for all apps:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Apps & Notifications.
3. Scroll down to Notifications to view how many apps have notifications turned off.
4. To set or view notifications settings for a specific app, see Setting App Notifications.
Controlling Lock Screen Notifications
To control whether notifications can be seen when the device is locked:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Apps & notifications > Notifications.
3. Touch On the lock screen and select one of the following:
• Show all notification content (default)
• Don’t show notifications at all.
Notification Indicator
The Charging/Notification LED lights blue when an app, such as email and VoIP, generates a programmable
notification or to indicate when the device is connected to a Bluetooth device. By default, LED notifications are
enabled.
To change the notification setting:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Apps & notifications > Notifications.
3. Touch Blink light to toggle the notification on or off.
Quick Access Panel
Use the Quick Access panel to access frequently used settings (for example, Airplane mode).
Figure 32 Quick Settings Bar
To see the full Quick Access panel:
• If the device is locked, swipe down once.
• If the device is unlocked, swipe down once with two fingers, or twice with one finger.
• If the Quick Settings bar is open, touch the Down arrow.
44
Using the Device
Figure 33 Quick Access Panel
NOTE: Not all icons are pictured. Icons may vary.
To change a setting, touch the icon:
• Display brightness - Use the slider to decrease or increase the brightness of the screen.
• Wi-Fi network - Turn Wi-Fi on or off. To open Wi-Fi settings, touch the Wi-Fi network name.
• Bluetooth settings - Turn Bluetooth on or off. To open Bluetooth settings, touch Bluetooth.
• Do not disturb - Control how and when to receive notifications.
• Airplane mode - Turn Airplane mode on or off. When Airplane mode is on the device does not connect to
Wi-Fi or Bluetooth.
• Auto-rotate - Lock the device’s orientation in portrait or landscape mode or set to automatically rotate.
• Flashlight - Turn flashlight on or off. Turn camera flash on or off.
The thermal protection safety feature for the camera provides the following behavior if the temperature
range is 40°C or above:
• If the flashlight is kept on for a certain period of time, it is automatically turned off and cannot be turned
back on for a period of time until it has cooled off.
• During the cooling off period, the camera cannot be turned on. If you attempt to use the camera, a
message displays indicating to try again after a period of time.
• Cast - Share phone content on Chromecast or a television with Google Cast built-in. Touch cast screen to
display a list of devices, then touch a device to begin casting.
Editing Icons on Quick Settings
The first several setting tiles from the Quick Access panel become the Quick Settings bar.
To move a setting tile:
1. Open the Quick Access panel.
2. Touch .
3. Touch and drag a setting tile to another location.
4. Release the tile.
45
Using the Device
5. Touch to save tiles and return to the Quick Access panel.
To add a setting tile:
1. Open the Quick Access panel.
2. Touch .
3. Slide the Quick Settings panel up to reveal additional tiles.
4. Touch and drag a setting tile from the Drag to add tiles area to the main area.
5. Release the tile.
6. Touch to save tiles and return to Quick Access panel.
To remove a setting tile:
1. Open the Quick Access panel.
2. Touch .
3. Touch and drag a setting tile to the Drag here to remove area.
4. Release the tile.
5. Touch to save tiles and return to Quick Access panel.
App Shortcuts and Widgets
App shortcuts placed on the Home screen allow quick and easy access to apps. Widgets are self-contained
apps placed on the Home screen to access frequently used features.
Adding an App Shortcut to the Home Screen
To add an app shortcut to the Home screen:
1. Go to the desired Home screen.
2. Swipe up from the bottom of the screen.
3. Scroll through the list to find the app icon.
4. Touch and hold the icon until the Home screen appears.
5. Position the icon on the screen and then release.
Adding a Widget to the Home Screen
To add a widget to the Home screen:
1. Go to the desired Home screen.
2. Touch and hold until the menu appears.
3. Touch WIDGETS.
4. Scroll through the list to find the widget.
5. Touch and hold the widget until the Home screen appears.
46
Using the Device
6. Position the widget on the screen and then release.
Moving Items on the Home Screen
To move app shortcuts or widgets on the Home screen:
1. Touch and hold the item until it floats on the screen.
2. Drag the item to a new location. Pause at the edge of the screen to drag the item onto an adjacent Home
screen.
3. Lift finger to place the item on the Home screen.
Removing an App Shortcut or Widget from the Home Screen
To remove an app shortcut or widget from the Home screen:
1. Go to the desired Home screen.
2. Touch and hold the app shortcut or widget icon until it floats on the screen.
3. Drag the icon to X Remove at the top of the screen and then release.
Folders
Use Folders to organize similar applications together. Tap the folder to open and display items in the folder.
Creating a Folder
There must be at least two app icons on the Home screen.
To create a folder:
1. Go to the desired Home screen.
2. Touch and hold one app icon.
3. Drag the icon and stack on top of another icon.
4. Lift and release.
Naming Folders
To name a folder:
1. Touch the folder.
Figure 34 Open Folder
Title Area
47
2. Touch the title area and enter a folder name using the keyboard.
3. Touch on the keyboard.
4. Touch anywhere on the Home screen to close the folder. The folder name appears under the folder.
Removing a Folder
To remove a folder:
1. Touch and hold the folder icon until it enlarges.
2. Drag the folder to X Remove and release.
Home Screen Wallpaper
To change the Home screen wallpaper:
1. Touch and hold the screen until the menu appears.
2. Touch WALLPAPERS.
Using the Device
3. Touch Photos or Gallery to select a photo or select one of the pre-installed wallpapers.
4. Touch Set wallpaper.
Using the Touchscreen
Use the multi-tap sensitive screen to operate the device.
• Tap - Tap to:
• Select items on the screen.
• Type letters and symbols using the on-screen keyboard.
• Press on-screen buttons.
• Tap and Hold - Tap and hold:
• An item on the Home screen to move it to a new location or to the trash.
• An item in Apps to create a shortcut on the Home screen.
• The Home screen to open a menu for customizing the Home screen.
• An empty area on the Home screen until the menu appears.
• Drag - Tap and hold an item for a moment and then move finger on the screen until reaching the new
position.
• Swipe - Move finger up and down or left and right on the screen to:
• Unlock the screen.
• View additional Home screens.
• View additional app icons in the Launcher window.
• View more information on an app’s screen.
• Double-tap - Tap twice on a web page, map, or other screen to zoom in and out.
• Pinch - In some apps, zoom in and out by placing two fingers on the screen and pinching them together (to
zoom out) or spreading them apart (to zoom in).
48
Keyboards
The device provides the following types of keyboards:
• Gboard
• Enterprise Keyboard
NOTE: By default the Enterprise and Virtual Keyboards are disabled.
Virtual Keyboard Configuration
Enabling Virtual Keyboards
To enable virtual keyboards:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch System > Languages & input > Virtual keyboard.
3. Touch Show virtual keyboard.
Using the Device
4. Touch Manage keyboards.
5. Touch a keyboard to enable.
Switching Between Virtual Keyboards
To switch between keyboards, touch in a text box to display the current keyboard.
• On the Gboard keyboard, touch and hold .
• On the Enterprise keyboard, touch .
Physical Keyboard Configuration
Enabling Physical Keyboards
To enable physical keyboards:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch System > Languages & input > Physical keyboard.
3. In the Keyboard assistance area, touch Show virtual keyboard.
4. Touch Keyboard shortcuts helper to view available shortcuts.
5. In the Keyboard press area, touch Sound on keypress.
6. Touch Volume on keypress to adjust the audible click on keypress. The default volume is set at 50%.
Using the Enterprise Keyboard
The Enterprise Keyboard contains the following keyboards:
• Numeric
49
Using the Device
• Alpha
• Special characters
• Data capture.
NOTE: The Enterprise keyboard supports English (US), English (UK), French, German, Spanish and Italian. When a key-
board language is selected in Settings, the corresponding keyboard language displays.
Numeric Tab
To access the numeric keyboard, touch the 123 tab. The keys displayed vary on the app being used. For
example, an arrow displays in Contacts, however Done displays in Email account setup.
Figure 35 Numeric Keyboard
Alpha Tab
To access the alpha keyboard, touch the EN tab.
Figure 36 Alpha Keyboard
Additional Character Tab
To access additional characters, touch the #*/ tab.
Figure 37 Symbols Keyboard
50
Using the Device
Touch to enter emoji icons in a text message.
Figure 38 Emoji Keyboard
Touch ABC to return to the Symbols keyboard.
Scan Tab
The Scan tab provides an easy data capture feature for scanning barcodes.
Figure 39 Scan Keyboard
Do Not Disturb Feature
This mode mutes the device so that it does not make sounds or vibrate.
For example, use Do Not Disturb to:
• Automatically limit sounds at night or during events
• Mute interruptions other than alarms
• Get alerted to messages only from favorite contacts.
Limit Sounds and Vibrations
Mute the device completely, or let through the important alarms or important calls.
Total Silence
To completely mute the device so that it does not make a sound or vibrate, choose Total silence.
In Total silence mode:
• Alarms do not make noise.
• Device does not vibrate or make sounds when receiving a message, or notification.
• Sounds from music, videos, games, and other media are muted.
51
Using the Device
NOTE: All alarms are silenced in Total silence mode.
1. Swipe down with two fingers from the Status bar to open the Quick Access panel.
2. Touch Do not disturb > Total silence.
3. Choose Until you turn it off or select a time period.
4. Touch Done.
When Total Silence is on, appears in the quick access panel and the Status bar.
To turn off Total Silence, open quick access panel and touch Total silence.
Alarms Only
To mute the device so that you hear alarms, choose Alarms only. This option does not mute sounds from
music, videos, games, or other media.
1. Swipe down with two fingers from the status bar to open the quick access panel.
2. Touch Do not disturb > Alarms only.
3. Choose Until you turn it off or select a time period.
4. Touch Done.
When Alarms Only is on, appears in the quick access panel and the Status Bar.
To turn off Alarms Only, open the Quick Access panel and touch Alarms only.
NOTE: To quickly turn on Alarms Only, with the screen on, press and hold the Volume Down button until the volume is all
the way down. Then, press Volume Down again to turn on Alarms Only.
To turn off Alarms Only, press either the Volume Up or Volume Down button and the touch END NOW in the
alert message.
Priority Notifications Only
To only be interrupted by important notifications, choose Priority only. This option does not mute sounds from
music, videos, games, or other media.
Before turning on Priority Only mode, set the notification priorities:
1. Swipe down from the status bar to open the quick settings bar and then touch .
2. Touch Sound > Do not disturb > Priority only allows.
3. Set priorities.
• Alarms: Disabled by default.
• Reminders and Events: Switch on or off.
• Messages: Choose From anyone, From contacts only, From starred contacts only, or none. To
star contacts, use the Contacts applications.
• Repeat callers: Choose whether to let the device ring if the same person calls again within 15 minutes.
After setting notification priorities, turn on Priority Only mode to limit interruptions. The priority notifications
make a sound or vibrate based on the current ringer volume, but other notifications will be silenced.
1. Swipe down with two fingers from the status bar to open the quick access panel.
52
Using the Device
2. Touch Do not disturb > Priority only.
3. Choose Until you turn it off or select a time period.
4. Tap Done.
When Priority Only is on, appears in the quick access panel and the Status Bar.
To turn off Priority Only, open quick access panel and touch Priority only.
Silence Sounds During Certain Times
To automatically silence the device during certain times, like at night or on weekends:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Sound > Do Not Disturb preferences.
3. Touch a default Weekend or Weeknight. Or, to make a new rule, touch Add more > Time rule.
4. Enter a rule name.
5. Touch OK.
6. Edit the new rule:
• Rule name - Rename the rule.
• Days, Start time, and End time - Set the rule's schedule.
• Do Not Disturb preferences - Choose whether the rule uses Alarms only, Priority only, or Total
silence.
• Alarm can override end time - Allow the alarm to continue to make sound until the next alarm begins.
7. Touch the On/Off switch at the top to turn on the rule.
Silence Sounds During Events and Meetings
To automatically silence the device during events or meetings, set an event rules.
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Sound > Do Not Disturb preferences.
3. To edit the default rule, touch Event. Or, to create a new rule, touch Add rule > Event rule.
4. Edit the rule settings.
• Rule name - Rename the rule.
• During events for - Select which Google Calendar events the rule uses.
• Where reply is - Set to: Yes, Maybe, or Not replied, Yes or Maybe, or Yes.
• Do Not Disturb preferences - Choose whether the rule uses Priority only, Alarms only, or Total
silence.
5. Touch the On/Off switch at the top to turn on the rule.
Turn Sounds Back On
When the device is in Do Not Disturb mode, Alarms only or Priority only display as , or Total silence displays
as .
To turn off Do Not Disturb, either:
53
Using the Device
• In the Quick Access panel, touch Alarms only, Priority only, or Total silence.
• Press the Volume Down button and touch End Now.
Override Do Not Disturb for Specific Apps
To let through notifications from specific apps:
1. Swipe down from the Status bar to open the Quick Settings bar and then touch .
2. Touch Apps & notifications > Notifications > App notifications.
3. Touch an app.
4. Touch Override Do Not Disturb.
Apps
The APPS screen displays icons for all installed apps. The table below lists the apps installed on the device.
Refer to the device Integrator Guide for Android Version 8.1 for information on installing and uninstalling apps.
Table 7 Apps
Icon Description
Battery Manager - Displays battery information, including charge level, status, health and wear
level.
Bluetooth Pairing Utility – Use to pair with the device by scanning a barcode.
Calculator - Provides the basic and scientific arithmetic functions.
Calendar - Use to manage events and appointments.
Camera - Take photos or record videos. For more information see Camera.
Chrome - Use to access the Internet or intranet.
Clock - Use to schedule alarms for appointments or as a wake-up.
Contacts - Use to manage contact information. See Contacts for more information.
54
Using the Device
Table 7 Apps (Continued)
Icon Description
DataWedge - Enables data capture using the imager.
Device Central - Use to display detailed information about the device and connected
peripherals. See Device Central for more information.
Diagnostic Tool - Use to diagnose the device.
Drive - Upload photos, videos, documents, and other files to personal storage site.
Duo - A one-to-one video calling app (WWAN only).
DWDemo - Provides a way to demonstrate the data capture features using the imager. See
DataWedge Demonstration for more information.
Email - Use to send and receive email.
Files - Organize and manage files on the device. See Files for more information.
Gmail - Use to send and receive email using a Google email account.
Google - Launches Google ™ search app.
Hangouts - Use to communicate with friends using text messages and photos.
Heater Control - Use to check the status on the heater and sensors when using the device in
cold environments. For more information, see Heater Control.
Keep- Use to create, edit, and share notes.
License Manager - Use to manage software licenses on the device.
55
Using the Device
Table 7 Apps (Continued)
Icon Description
Maps - Use to see your location on a map (with public transit, traffic, or satellite overlays).
Search for any business or place of interest. Provides turn-by-turn navigation with voice
guidance, traffic-avoidance, and alternate routes, for drivers, cyclists, walkers, and users of
public transportation.
Photos - Use to sync photos with Google account. For more information, see Photo Settings.
Play Movies & TV - View movies and video on your device.
Play Music - Use to listen to music.
Play Store - Download music, movies, books, and Android apps and games from the Google
Play Store.
PTT Express - Use to launch PTT Express client for VoIP communication.
RxLogger - Use to diagnose device and app issues. See the device Integrator Guide for
Android Version 8.1 for more information.
RxLogger Utility - Use to view, backup, and archive RxLogger data.
Settings - Use to configure the device.
Sound Recorder - Use to record audio.
StageNow - Allows the device to stage a device for initial use by initiating the deployment of
settings, firmware, and software.
Velocity - Opens the Ivanti (formerly Wavelink) terminal emulation app.
Voice Search - Use to perform searches by asking questions.
56
Using the Device
Table 7 Apps (Continued)
Icon Description
Worry Free Wifi Analyzer - A diagnostic intelligent app. Use to diagnose surrounding area and
display network stats, such as coverage hole detection, or AP in vicinity. Refer to the Worry Free
Wi-Fi Analyzer Administrator Guide for Android.
YouTube - Use to view videos on the YouTube
Zebra Bluetooth - Use to configure Bluetooth logging.
Accessing Apps
All apps installed on the device are accessed using the APPS window.
1. On the Home screen, swipe up from the bottom of the screen.
Figure 40 APPS Window Example
™ web site.
Slide the APPS window up or down to view more app icons. Touch an icon to open the app.
Switching Between Recent Apps
To switch between recent apps:
1. Touch . A window appears on the screen with icons of recently used apps.
57
Figure 41 Recently Used Apps
Using the Device
2. Slide the apps displayed up and down to view all recently used apps.
3. Swipe left or right to remove app from the list and force close the app.
4. Touch an icon to open an app or touch to return to the current screen.
Un-Locking the Screen
Use the Lock screen to protect access to data on the device. Some email accounts require locking the screen.
Refer to the device Integrator Guide for information on setting up the locking feature.
When locked, a pattern, PIN, or password is required to unlock the device. Press the Power button to lock the
screen. The device also locks after a pre-defined time-out.
Press and release the Power button to wake the device. The Lock screen displays. Swipe the screen up to
unlock. If the Pattern screen unlock feature is enabled, the Pattern screen appears instead of the Lock screen.
If the PIN or Password screen unlock feature is enabled, enter the PIN or password after unlocking the screen.
58
Figure 42 Lock Screen
Figure 43 PIN Screen
Using the Device
59
Figure 44 Pattern Screen
Using the Device
Figure 45 Password Screen
Smart Lock
Keep the device unlocked in some situations, like when the device is in your holster or near a specific location.
With Smart Lock, the user will not need to unlock the device with a PIN, pattern, or password.
To enable Smart Lock:
60
Using the Device
1. Ensure that a screen lock feature (PIN, pattern, or password) is enabled.
2. Swipe down from the Status bar to open the Quick Settings bar and then touch .
3. Touch Security & location > Smart Lock.
4. Enter the PIN, pattern, or password to continue.
Figure 46 Smart Lock Screen
5. Select one of the options:
• On-body detection
• Trusted places
• Trusted devices
• Trusted face
• Voice Match.
6. Follow the on-screen instructions for setting up each option.
Resetting the Device
The reset functions include the following:
• Soft reset
• Hard reset
• Enterprise reset- Refer to the device Integrator Guide for more information.
• Factory reset - Refer to the device Integrator Guide for more information.
61
Performing a Soft Reset
Perform a soft reset if applications stop working.
1. Press and hold the Power button until the menu appears.
2. Touch Restart.
The device reboots.
Performing a Hard Reset
CAUTION: Performing a hard reset with a microSD card installed in the device may cause damage or data corruption to the
microSD card. All un-saved data is lost after performing a hard reset.
Perform a hard reset if the device stops responding.
1. Simultaneously press the Power, Center Scan and Trigger buttons for at least four seconds.
2. When the screen turns off, release the buttons.
The device reboots.
Using the Device
Suspend Mode
The device goes into suspend mode when you press the Power button or after a period of inactivity (set in the
Display settings window).
To wake the device from Suspend mode, press the Power button or the configured wake-up sources. The Lock
screen displays. Swipe the screen up to unlock. If the Pattern screen unlock feature is enabled, the Pattern
screen appears instead of the Lock screen. If the PIN or Password screen unlock feature is enabled, enter the
PIN or password after unlocking the screen. See Un-Locking the Screen.
NOTE: If you enter the PIN, password, or pattern incorrectly five times, you must wait 30 seconds before trying again.
If you forget the PIN, password, or pattern contact your system administrator.
The device will wake on the detection of AC/DC power if it is either in suspend mode or powered off.
Transferring Files with a Host Computer via USB
Connect the device to a host computer using a USB cradle to transfer files between the device and the host
computer.
When connecting the device to a host computer, follow the host computer’s instructions for connecting and
disconnecting USB devices, to avoid damaging or corrupting files.
Transferring Files
NOTE: Use Transfer files to copy files between the device (internal memory) and the host computer.
1. Place the device into a USB cradle or into the USB snap on cup.
2. Pull down the Notification panel and touch USB charging this device.
By default, Charge this device is selected.
62
Using the Device
Figure 47 Use USB to Dialog Box
3. Touch Transfer files.
4. On the host computer, open a file explorer application.
5. Locate the device as a portable device.
6. Open the Internal storage folder.
7. Copy files to and from the device or delete files as required.
Transferring Photos
To transfer photos using Photo Transfer Protocol:
NOTE: Use Photo Transfer Protocol (PTP) to copy photos from the internal memory to the host computer.
1. Place the device into a USB cradle.
2. Pull down the Notification panel and touch USB charging this device.
3. Touch Transfer photos (PTP).
4. On the host computer, open a file explorer application.
5. Open the Internal storage folder.
6. Copy or delete photos as required.
Disconnect from the Host Computer
To disconnect the device from the host computer:
CAUTION: Carefully follow the host computer’s instructions to disconnect USB devices correctly to avoid losing information.
1. On the host computer, unmount the device.
2. Remove the device from the cradle.
63
Applications
Introduction
This section describes the applications installed on the device.
Battery Manager
The Battery Manager provides detailed information about the battery.
To open Battery Manager, swipe up from the bottom of the Home screen and touch .
64
Figure 48 Battery Manager Screen
Applications
Table 8 Battery Icon Description
Battery
Icon
Battery charge level.
Battery charging.
Battery charge level is below 15 (Standard Battery) and
9% (Freezer Battery)%.
• Battery level - The current battery charge level as a percentage. Displays -% when level is unknown.
• Time until full - The amount of time until the battery is fully charged.
• Time since charging - The amount of time since the device began charging.
• Time until empty - The amount of time until the battery is empty.
• Battery status
• Not charging - The device is not charging.
• Charging over AC - The device is connected to AC power and charging.
• Charging over USB - The device is connected to a host computer with a USB cable and charging.
• Discharging - That the battery is discharging.
• Full - That the battery is fully charged.
• Unknown - The battery status is unknown.
Description
65
Applications
• Battery health - The health of the battery. If a critical error occurs, appears. Touch to view the error
description.
• Decommission - The battery is past its useful life and should be replaced. See system administrator.
• Good - The battery is good.
• Charge error - An error occurred while charging. See system administrator.
• Over Current - An over-current condition occurred. See system administrator.
• Dead - The battery has no charge. Replace the battery.
• Over Voltage - An over-voltage condition occurred. See system administrator.
• Below Temperature - The battery temperature is below the operating temperature. See system
administrator.
• Failure Detected - A failure has been detected in the battery. See system administrator.
• Unknown - See system administrator.
• Wear level - The health of the battery in graphical form. When the wear level exceeds 80%, the bar color
changes to red.
• Advanced info - Touch to view additional battery information.
• Battery present status - Indicates that the battery is present.
• Battery level - The battery charge level as a percentage of scale.
• Battery scale - The battery scale level used to determine battery level (100).
• Battery voltage - The current battery voltage in millivolts.
• Battery temperature - The current battery temperature in degrees Centigrade.
• Battery technology - The type of battery.
• Battery current - The average current into or out of the battery over the last second in mAh.
• Battery manufacture date - The date of manufacture.
• Battery serial number - The battery serial number. The number matches the serial number printed on
the battery label.
• Battery part number - The battery part number.
• Battery rated capacity - Lists the rated capacity of the backup battery in mAh.
• Battery decommission status - Indicates if the battery is past its life span.
• Battery Good - The battery is in good health.
• Decommissioned Battery - The battery is past its useful life and should be replaced.
• Base cumulative charge - Cumulative charge using Zebra charging equipment only.
• Battery present capacity - Maximum amount of charge that could be pulled from the battery under the
present discharge conditions if the battery were fully charged.
• Battery health percentage - With a range from 0 to 100, this is the ratio of “present_capacity” to
“design_capacity” at a discharge rate of “design_capacity”.
• % decommission threshold - The default % decommission threshold for a gifted battery as 80%.
• Battery present charge - Amount of usable charge remaining in the battery at present under the
current discharge conditions.
• Battery total cumulative charge - The total accumulated charge in all chargers.
• Battery time since first use - The time passed since the battery was placed in a Zebra terminal for the
first time.
• Battery error status - The error status of the battery.
• App version - The application version number.
66
Heater Control
The Heater Control application provides information about the sensors and heater applicable to the freezer
device. To open the Heater Control, swipe up from the bottom of the Home screen and touch .
IMPORTANT: Heater Control app is only applicable to freezer configurations.
The scanner exit window heater ensures optimum scanner performance in freezer applications.
Status
Figure 49 Heater Control - Status
Applications
The Status tab displays:
TEMPERATURE for the following:
• Display
• Vent
• Scanner Window
• Scanner Bay.
HUMIDITY for the following:
• Vent
67
HEATER for the following:
• Scanner Window (default - enabled). This option should always be enabled for the heater to function
properly. Disable this option only if you are performing debugging activities on the heater system.
Advanced
Figure 50 Heater Control - Advanced
Applications
• In the HEATER area, tap to disable SCANNER WINDOW HEATER. By default this option is enabled.
• In the ADVANCED area, tap to enable LOGGING. Logging allows you to log data for the heating system
(heaters and sensors). The data resides in the
• Click TEST HEATER to perform a diagnostic test on the heating system.
NOTE: Heater tests must be performed in an ambient environment with temperature of less than +30° C.
/sdcard/HeaterLogs location in a .csv file on the device.
68
Figure 51 Heater Test
Applications
Once the tests are complete the results screen displays.
Figure 52 Heater Test (Status after Functional Check)
69
Files
Applications
Use the Files app to view and manage files on the device.
To open Files, swipe up from the bottom of the screen and touch .
Figure 53 Files Screen
Sort
• Touch and hold an item to open the File Operations menu. Select an option:
• - Share the file with other devices.
• - Delete the file.
• - View additional options.
• Open with - Select which app is used to open the file.
• Select all - Select all folders and files.
• Copy to... - Copy the file.
• Move to... - Move the file or folder to a new location.
• Compress - Compress the selected file(s) into a ZIP file.
• Rename - Rename the file.
• Touch the Sort drop-down to sort files by name, type, size, or date.
• - View all file locations.
• - Search for a specific file on the device.
• / - Change the folder to display items as a list / grid.
• - Open the options menu.
• New Window - Create a new Files window.
• New Folder - Create a new folder.
• Select all - Select all folders and files.
• Show/Hide internal storage - Show or hide internal storage.
70
Contacts
Use the Contacts app to manage contacts.
From a Home or Apps screen, touch Contacts to open to the main list of contacts. Contacts are listed in
alphabetical order. Swipe up or down to scroll through the list.
Adding a Contact
1. In the Contacts app, touch .
2. If there is more than one account with contacts, touch the one you want to use.
3. Type the contact’s name and other information. Touch a field to start typing, and swipe down to view all
categories.
4. To open a menu with preset labels, such as Home or Work for an email address, touch the label to the right
of the item of contact information. Or, to create your own label, touch Custom in the menu.
5. Touch the check mark next to Add New Contact.
Applications
Editing Contacts
1. In the Contacts app, touch a contact name to edit.
2. Touch .
3. Edit the contact information.
4. Touch SAVE.
Deleting Contacts
1. In the Contacts app, touch a contact name to delete.
2. Touch .
3. Touch Delete.
4. Touch DELETE to confirm.
71
Camera
Applications
This section provides information for taking photos and recording videos using the integrated digital cameras.
The device saves photos and videos on the microSD card, if installed and the storage path is changed manually. By
default, or if a microSD card is not installed, the device saves photos and videos on the internal storage.
platform-based products, you can use the imager and camera simultaneously. By default, third-party camera
applications are associated with the Datawedge Profile0 where scanning is enabled. In these applications the
Scan button initiates the scan session. If you do not want scanning to be enabled in the application, you must
associate a new Datawedge profile with the application and disable scanning.
NOTE: The native Google camera application is associated with a hidden DataWedge profile. The scanning functionality is
temporarily disabled when the Google camera application is being used. If a third-party camera application is utilized the
scanning functionality will not be disabled allowing the simultaneous use of the scanner and the camera. This will have a
direct impact on the image quality. It is strongly recommended that you use the native Google camera application.
On SDM660
72
Taking Photos
NOTE: See Photo Settings for camera setting descriptions.
1. Swipe up from the bottom of the Home screen and touch Camera.
Figure 54 Camera Mode
Applications
Filters
Scene Mode
Camera Switch
HDR
Settings
Gallery
Shutter Button
Camera Mode
2. If necessary, touch the Camera Mode icon and touch .
3. To switch between the rear camera and front camera (if available), touch .
4. Frame the subject on the screen.
5. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear
on the screen.
6. Touch an area on the screen to focus. The focus circle appears. The two bars turn green when in focus.
7. Touch .
The camera takes a photo and a shutter sound plays.
The photo momentarily displays as a thumbnail in the lower left corner.
73
Taking a Panoramic Photo
Panorama mode creates a single wide image by panning slowly across a scene.
1. Swipe up from the bottom of the Home screen and touch Camera.
Figure 55 Panoramic Mode
Applications
2. Touch the Camera Mode icon and touch .
3. Frame one side of the scene to capture.
4. Touch and slowly pan across the area to capture. A small white square appears inside the button
indicating the capture is in progress.
If you are panning too quickly, the message Too fast appears.
5. Touch to end the shot. The panorama appears immediately and a progress indicator displays while it
saves the image.
Recording Videos
1. Swipe up from the bottom of the Home screen and touch Camera.
2. Touch the camera mode menu and touch .
Figure 56 Video Mode
74
Color Effect
Applications
Camera Switch
Audio
Settings
Gallery
3. To switch between the rear camera and front camera (if available), touch .
4. Point the camera and frame the scene.
5. To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear
on the screen.
6. Touch to start recording.
The video time remaining appears in the top left of the screen.
7. Touch to the end recording.
The video momentarily displays as a thumbnail in the lower left corner.
Photo Settings
In Photo mode, photo settings appear on screen. Touch to display the photo settings options.
Camera Mode
Shutter Button
75
Applications
Rear Camera
• Flash - Select whether the camera relies on its light meter to decide whether a flash is necessary, or to turn
it on or off for all shots.
• Off - Disable flash.
• Auto - Adjust flash automatically depending upon light meter (default).
• On - Enable flash upon taking a photo.
• Picture size - The size (in pixels) of the photo to: 13M pixels (default), 8M pixels, 5M pixels, 3M pixels,
HD 1080, 2M pixels, HD720, 1M pixels, WVGA, VGA, or QVGA.
• Picture quality - Set the picture quality setting to: Low, Standard (default) or High.
• Countdown timer - Select Off (default), 2 seconds, 5 seconds or 10 seconds.
• Storage – Set the location to store the photo to: Phone or SD Card.
• Face Detection - Select to turn face detection Off (default) or On.
• ISO - Set camera sensitivity to light to: Auto (default), ISO Auto (HJR), ISO100, ISO200, ISO400, ISO800
or ISO1600.
• Exposure - Set the exposure settings to: +2, +1, 0(default), -1 or -2.
• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors:
• Incandescent - Adjust the white balance for incandescent lighting.
• Fluorescent - Adjust the white balance for florescent lighting.
• Auto - Adjust the white balance automatically (default).
• Daylight - Adjust the white balance for daylight.
• Cloudy - Adjust the white balance for a cloudy environment.
• Chroma Flash - Sets the camera to take two pictures, one with flash and one without flash. The two
images are combined to produce a final image with the sharpness and clarity and bright color tones from a
picture with the flash, coupled with the natural colors of a picture without a flash. Options: Off (default) or
On.
• Redeye reduction - Helps eliminate redeye effect. Options: Disabled (default), or Enable.
• ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled).
• Anti Banding - Allows the camera to avoid problems caused by artificial light sources that are not constant.
These sources cycle (flicker) fast enough to go unnoticed to the human eye, appearing continuous. The
camera’s eye (its sensor) can still see this flicker. Options: Auto (default), 60 Hz, 50 Hz, or Off.
Video Settings
In Video mode, video settings appear on screen. Touch to display the video settings options.
76
Applications
Rear Camera
• Flash - Select whether Rear-facing Camera relies on its light meter to decide whether a flash is necessary,
or to turn it on or off for all shots.
• Off - Disable flash (default).
• Torch - Turn flash on continuously.
• Video quality - Set video quality to: HD 1080p (default), HD 720p, SD 480p.
• Video duration - Set to: 30 seconds (MMS), or 30 minutes (default).
• Storage – Set the location to store the photo to: Phone (default) or SD Card.
• White balance - Select how the camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors.
• Incandescent - Adjust the white balance for incandescent lighting.
• Fluorescent - Adjust the white balance for florescent lighting.
• Auto - Adjust the white balance automatically (default).
• Daylight - Adjust the white balance for daylight.
• Cloudy - Adjust the white balance for a cloudy environment.
• Image Stabilization - Set to reduce blurry videos due to device movement. Options: On or Off (default).
77
Photos
Applications
NOTE: The device supports the following image formats: jpeg, gif, png, and bmp.
The device supports the following video formats: H.263, H.264, and MPEG4 Simple Profile.
Available on device with GMS only.
Use Photos to:
• View photos
• Play videos
• Perform basic editing of photos
• Set photos as wallpaper
• Set photos as a contact photo
• Share photos and videos.
Photos presents all photos and videos stored on the internal memory.
To open Photos, swipe up from the bottom of the Home screen and touch Photos.
By default, Photos opens to the photos view.
Figure 57 Photos View
Touch Albums to view photos sorted by albums.
78
Figure 58 Albums View
Applications
• Touch an album to view its contents. The photos and videos in the album appear in chronological order.
• Touch a photo or video in an album to view it.
• Touch to return to the main screen.
Working with Albums
Albums are groups of images and videos in folders. Touch an album to open it. The photos and videos are
listed in a chronologically ordered grid. The name of the album displays at the top of the screen.
79
Figure 59 Photos Inside an Album
Applications
Swipe up to scroll through the images.
Sharing an Album
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch Albums.
3. Touch an album.
4. Touch > Select.
5. Select all photos in the album.
6. Touch . The Share menu opens.
7. Touch an app to share the selected albums.
8. Follow the instructions within the selected app.
Deleting an Album
To delete an album and its contents:
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch Albums.
3. Touch an album.
4. Touch > Select.
5. Select all photos in the album.
6. Touch .
80
Applications
7. Touch Move to trash to delete the album.
Working with Photos
Use Photos to view photos on the internal memory.
Viewing and Browsing Photos
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a photo.
Figure 60 Photo Example
3. Swipe left or right to view the next or previous photo in the album.
4. Turn the device to view the photo in upright (portrait) or sideways (landscape) orientation. The photo is
displayed (but not saved) in the new orientation.
5. Touch the photo to view the controls.
6. Double-tap the screen to zoom in, or pinch two fingers together or spread them apart to zoom in or out.
7. Drag the photo to view parts that are not in view.
Cropping a Photo
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a photo to view the controls.
3. Touch > . The cropping tool appears.
81
Figure 61 Cropping Tool
Applications
4. Use the cropping tool to select the portion of the photo to crop.
• Drag from the inside of the cropping area to move it.
• Drag an edge of the cropping area to resize it to any proportion.
5. Touch DONE.
6. Touch SAVE to save a copy of the cropped photo. The original version is retained.
Setting a Photo as a Contact Icon
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch the photo to open it.
3. Touch > Use as.
4. Touch Contact photo.
5. In the Contacts app, touch a contact.
6. Touch the white box and crop the photo accordingly.
7. Touch Done.
Sharing a Photo
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch an album to open it.
3. Touch a photo to open it.
4. Touch .
82
5. Touch the app to use to share the selected photo.
6. Follow the instructions within the selected app.
Deleting a Photo
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a photo to open it.
3. Touch .
4. Touch MOVE TO TRASH.
Working with Videos
Use Photos to view and share videos.
Watching a Video
1. Swipe up from the bottom of the Home screen and touch Photos.
Applications
2. Touch a video to play.
3. Touch the screen to view the playback controls.
Sharing a Video
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a video to open it.
3. Touch . The Share menu appears.
4. Touch the app to use to share the selected video.
5. Follow the instructions within the selected app.
Deleting a Video
1. Swipe up from the bottom of the Home screen and touch Photos.
2. Touch a video to open it.
3. Touch .
4. Touch MOVE TO TRASH to delete the video.
83
DataWedge Demonstration
NOTE: DataWedge is enabled on the Home screen.To disable this feature, go to the DataWedge settings and disable the
Launcher profile.
Use DataWedge Demonstration to demonstrate data capture functionality.
Figure 62 DataWedge Demonstration Window
Applications
Table 9 DataWedge Demonstration Icons
Icon Description
Illumination Imager illumination is on. Touch to turn illumination off.
Imager illumination is off. Touch to turn illumination on.
Data Capture The data capture function is through the internal imager.
A Bluetooth scanner is connected.
A Bluetooth scanner is not connected.
The data capture function is through the rear camera.
84
Table 9 DataWedge Demonstration Icons (Continued)
Scan Mode Imager is in picklist mode. Touch to change to normal scan mode.
NOTE: See the device Integrator Guide for Android Version 8.1 for information on DataWedge configuration.
Scanner Selection
To select a scanner, touch > Settings > Scanner selection.
See Data Capture for more information.
Applications
Icon Description
Imager is in normal scan mode. Touch to change to picklist mode.
Opens a menu to view the application information or to set the
application DataWedge profile.
Either press the programmable button or touch the yellow scan button to capture data. The data appears in the
text field below the yellow button.
85
Sound Recorder
Use Sound Recorder to record audio messages.
Recordings are saved on the microSD card (if installed) or the internal storage and are available in the Play
Music application (GMS devices).
Figure 63 Sound Recorder Application
Applications
PTT Express Voice Client
NOTE: PTT Express Voice Client enables Push-To-Talk (PTT) communication between disparate enterprise devices. Le-
veraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express delivers simple PTT communication
without requiring a voice communication server.
• Group Call: Press and hold the PTT (Talk) button to start communicating with other voice client users.
• Private Response: Double-press the PTT button to respond to the originator of the last broadcast or to
make a Private Response.
86
PTT Audible Indicators
The following tones provide helpful cues when using the voice client.
• Talk Tone: Double chirp. Plays when the Talk button is depressed. This is a prompt for you to start talking.
• Access Tone: Single beep. Plays when another user just finished a broadcast or response. You can now
initiate a Group Broadcast or Private Response.
• Busy Tone: Continuous tone. Plays when the Talk button is depressed and another user is already
communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60 seconds).
• Network Tone:
• Three increasing pitch beeps. Plays when PTT Express acquires the WLAN connection and the service
is enabled.
• Three decreasing pitch beeps. Plays when PTT Express loses the WLAN connection or the service is
disabled.
PTT Notification Icons
Notification icons indicate the current state of the PTT Express Voice client.
Applications
Table 10 PTT Express Icon Descriptions
Status Icon Description
The PTT Express Voice client is disabled.
The PTT Express Voice client is enabled but not connected to a WLAN.
The PTT Express Voice client is enabled, connected to a WLAN, and listening on the Talk
Group indicated by the number next to the icon.
The PTT Express Voice client is enabled, connected to a WLAN, and communicating on the
Talk Group indicated by the number next to the icon.
The PTT Express Voice client is enabled, connected to a WLAN, and in a private response.
The PTT Express Voice client is enabled and muted.
The PTT Express Voice client is enabled but it is not able to communicate due to a VoIP
telephony call in progress.
Enabling PTT Communication
1. Swipe up from the bottom of the Home screen and touch .
2. Slide the Enable/Disable Switch to the ON position. The button changes to ON.
87
Selecting a Talk Group
One of 32 Talk Groups can be selected by PTT Express users. However, only one talk group may be enabled
at a time on the device. Touch one of the 32 Talk Groups. The selected Talk Group is highlighted.
PTT Communication
NOTE: This section describes the default PTT Express client configuration. Refer to the PTT Express V1.2 User Guide for
detailed information on using the client.
Figure 64 PTT Button
Applications
P1 - Dedicated PTT Key
Creating a Group Call
1. Press and hold the PTT button (or the Talk button on the headset) and listen for the talk tone.
If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure that
PTT Express and the WLAN are enabled.
2. Start talking after hearing the talk tone.
NOTE: Holding the button for more than 60 seconds (default) drops the call, allowing others to make Group calls. Release
the button when finished talking to allow others to make calls.
Responding with a Private Response
The Private Response can only be initiated once a Group Call has been established. The initial Private
Response is made to the originator of the Group Call.
1. Wait for an access tone.
2. Within 10 seconds, double-press the PTT button, and listen for the talk tone.
88
Applications
3. If you hear a busy tone, release the button and wait a moment before making another attempt. Ensure that
PTT Express and the WLAN are enabled.
4. Start talking after the talk tone plays.
5. Release the button when finished talking.
Disabling PTT Express Voice Client Communication
1. Swipe up from the bottom of the Home screen and touch .
2. Slide the Enable/Disable Switch to the OFF position. The button changes to OFF.
3. Touch .
89
RxLogger
RxLogger is a comprehensive diagnostic tool that provides app and system metrics. Create custom plug-ins
that work seamlessly with this tool. RxLogger diagnoses device and application issues, and tracks information
for: CPU load, memory load, memory snapshots, battery consumption, power states, wireless logging, TCP
dumps, Bluetooth logging, logcat, ANR dumps, etc. All logs and files generated are saved in flash storage on
the device (internal or external).
Figure 65 RxLogger
Applications
90
RxLogger Utility
RxLogger Utility is a data monitoring application for viewing logs in the device while RxLogger is running.
Access the logs and RxLogger Utility features in the App View or the Overlay View.
In the App View, view logs in the RxLogger Utility.
Figure 66 RxLogger Utility App View
Applications
Refer to the for detailed information on the RxLogger Utility.
91
Diagnostic Tool
The Diagnostic Tool is a utility that determines the health of the device. Use the Diagnostic Tool to
troubleshoot the device.
1. Swipe up from the bottom of the Home screen and touch .
Figure 67 Diagnostic Tool
Applications
2. Touch RUN TEST. The app tests all enabled subsystems (by default, only the Battery and System tests).
See Settings to enable subsystem tests.
92
Figure 68 Test Passed Screen
Applications
Figure 69 Test Failed Screen
3. To view each subsystem test, touch Subsystem Tests.
93
Figure 70 Subsystem Screen
Applications
4. Touch one of the subsystems to view details.
Table 11 Subsystem Test Result Indicators
Status Icon Description
Test passed.
Test failed.
Test not supported or not enabled.
94
Figure 71 Battery Subsystem Details
Applications
Settings
By default only the Battery and System tests are enabled. To enable other tests:
1. Touch > Settings.
2. Touch to the left of the test name. A green box with a checkmark appears.
3. Touch SAVE.
4. Touch Yes to confirm.
5. Touch .
Battery Test Information
The Battery Test obtains the following information:
• Battery Level - Current battery charge level
• Battery Voltage - Current battery voltage
• Status - Whether the battery is charging (on AC power) or discharging (on battery power)
• Power Source - Whether the device is receiving power from the battery or from an external source
• Temperature - Current battery temperature
• Health Percentage - Indicates the ratio of present capacity to design capacity at a discharge rate of design
capacity.
• Backup Battery Voltage - Backup battery voltage. The MC93XX has a supercapacitor and not a backup
battery, so this statistic will always display as 0 V.
• Manufacture Date - Manufacture date of the battery.
95
GPS Test Information
Not supported on this device.
System Test Information
Use the System Test to determine if the CPU or memory loads are too high, there are too many processes
running on the device, or storage on the device is almost full.
The System Test obtains the following information:
• CPU Load - Amount of CPU being used
• Free Physical Memory - Amount of RAM available
• Free Storage - Amount of internal Flash memory available
• Process Count - Number of processes currently running.
WLAN Test Information
Applications
If the WiFi radio is not present or disabled, skip this test. This test determines if the device’s WLAN
configuration is correct or whether there is any connection with an access point or network.
The WLAN test obtains the following information:
• WLAN Enabled - WLAN radio is enabled or disabled
• WLAN Status - Current status of association with the access point
• ESSID - Name of the wireless network
• BSSID - MAC address of the connected access point
• MAC Address - Device’s MAC address
• Signal - Strength of the Wi-Fi signal (in dBm)
• IP Address - IP address of the device.
WWAN Test Information
Not supported on this device.
Bluetooth Test Information
The Bluetooth Test obtains the following information:
• Enabled - Whether the Bluetooth radio is enabled or disabled
• Status - Whether the device is paired to another Bluetooth device
• Connectable/Discoverable - Whether the device is discoverable or able to connect
• Address - Bluetooth radio MAC address
• Name - Bluetooth name for the device.
96
Device Central
Device Central displays detailed information about the device and connected peripherals and supports the
following Zebra devices:
• RS507/RS507X Hands-free Imager
• RS6000 Bluetooth Ring Scanner
• DS3678 Digital Scanner.
Device Central features include:
• Discovering and pairing with supported peripherals via Bluetooth or corded connection.
• Paging a connected RS6000 Ring Scanner.
• Displaying the connection status of peripherals.
• Displaying information for a connected peripheral in the notification bar.
Figure 72 Device Central Screen
Applications
97
Paging an RS6000 Ring Scanner
Use Page button to easily locate the currently connected RS6000 Ring Scanner:
1. With the RS6000 Ring Scanner connected, swipe up from the bottom of the Home screen, and touch .
NOTE: The RS6000 Ring Scanner must be within 10 m (32 ft) of the device.
2. Touch RS6000. The Device Details screen displays.
Figure 73 Page RS6000
Applications
3. Under the RS6000 peripheral information, touch Page to page the RS6000. The paged RS6000 beeps and
vibrates.
To stop paging, press the scan trigger of the RS6000. On a triggerless RS6000, reset the RS6000 to stop
paging. Refer to the RS6000 User Guide.
98
Data Capture
Introduction
This chapter provides information for capturing barcode data using the internal camera and optional
scan modules and Bluetooth scanner.
The device offers the following data capture options:
• Imager (SE4750-SR 2D, SE4850-ER 2D, SE4770 2D, SE4750DPM, and SE4750DPW).
• Laser Scanner (SE965 1D).
• Bluetooth (RS507/RS507X Hands-free imager, RS6000 Bluetooth Ring Scanner, and DS3678
Digital Barcode Scanner).
NOTE: DataWedge is installed and enabled on the device by default.
By default, the good decode beep is set to system volume (Notifications). The good decode beep can be set to
another sound (Music and Media), and the volume can be independently controlled. See the DataWedge section
in the Integrator Guide for more information.
Integrated Imager
The device with an integrated 2D imager has the following features:
• Omnidirectional reading of a variety of barcode symbologies, including the most popular linear,
postal, PDF417, Digimarc, and 2D matrix code types.
• Advanced intuitive laser aiming cross-hair and dot aiming for easy point-and-shoot operation.
The imager uses imaging technology to take a picture of a barcode, and executes state-of-the-art
software decoding algorithms to extract the barcode data from the image.
Operational Modes
The device with an integrated imager supports two modes of operation, listed below. Activate each
mode by pressing the Scan button.
• Decode mode - The device attempts to locate and decode enabled barcodes within its field of view.
The imager remains in this mode as long as you hold the scan button, or until it decodes a barcode.
NOTE: To enable Pick List Mode, configure in DataWedge or set in an application using a API command.
• Pick List mode - Selectively decode a barcode when more than one barcode is in the device’s field
of view by moving the aiming crosshair or dot over the required barcode. Use this feature for pick
99
Data Capture
lists containing multiple barcodes and manufacturing or transport labels containing more than one barcode
type (either 1D or 2D).
Laser Scanner
The device with a laser scanner has the following features:
• Reading of a variety of barcode symbologies, including the most popular linear, and 1D code types.
• Intuitive laser aiming for easy point-and-shoot operation.
RS507/RS507X Hands-Free Imager
The RS507/RS507X Hands-free Imager is a wearable barcode scan solution for both 1D and 2D barcode
symbologies.
Figure 74 RS507/RS507X Hands-Free Imager
Refer to the RS507/RS507X Hands-free Imager Product Reference Guide for more information.
RS6000 Bluetooth Ring Scanner
The RS6000 Bluetooth Ring Scanner is a wearable barcode scan solution for both 1D and 2D barcode
symbologies.
Figure 75 RS6000 Bluetooth Ring Scanner
Refer to the RS6000 Bluetooth Ring Scanner Product Reference Guide for more information.
DS3678 Digital Scanner
The cordless DS3678 combines superior 1D and 2D omnidirectional barcode scanning performance and
advanced ergonomics in a lightweight design. See the DS36X8 Product Reference Guide for more information.
100
Loading...