Zebra MC9090-Z RFID Handheld Reader MC9090 RFID Regulatory Guide Microsoft® CE® and Windows Mobile® 6.1

MC9090 RFID

Regulatory Guide

Microsoft®CE®and Windows Mobile®6.1

© 2015 Symbol Technologies, Inc.
Zebra reserves the right to make changes to any product to improve
reliability, function, or design.
Zebra does not assume any product liability arising out of, or in connection
with, the application or use of any product, circuit, or application described
herein.
No license is granted, either expressly or by implication, estoppel, or
otherwise under any patent right or patent, covering or relating to any
combination, system, apparatus, machine, material, method, or process in
which Zebra products might be used. An implied license exists only for
equipment, circuits, and subsystems contained in Zebra products.

Warranty

For the complete Zebra hardware product warranty statement, go to:

http://www.zebra.com/warranty.

For Australia Only:

For Australia Only. This warranty is given by Zebra Technologies Asia
Pacific Pte. Ltd., 71 Robinson Road, #05-02/03, Singapore 068895,
Singapore. Our goods come with guarantees that cannot be excluded
under the Australia Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure. Zebra
Technologies Corporation Australia’s limited warranty above is in
addition to any rights and remedies you may have under the Australian
Consumer Law. If you have any queries, please call Zebra
Technologies Corporation at [phone]. You may also visit our
website: http://www.zebra.com for the most updated warranty terms.

Zebra Technologies Corporation
Lincolnshire, IL U.S.A.
http://www.zebra.com

Zebra and the Zebra head graphic are registered trademarks of ZIH
Corp. The Symbol logo is a registered trademark of Symbol
Technologies, Inc., a Zebra Technologies company.
© 2015 Symbol Technologies, Inc.

72-132871-02 Revision A — March 2015

Regulatory Information

This guide applies to Model Number: MC9090 RFID.
All Zebra devices are designed to be compliant with rules and

regulations in locations they are sold and will be labeled as
required.

Local language translations are available at the following
website: http://www.zebra.com/support.

Any changes or modifications to Zebra equipment, not
expressly approved by Zebra, could void the user's authority
to operate the equipment.

CAUTION Only use Zebra approved and UL Listed

accessories, battery packs and battery chargers.

Do NOT attempt to charge damp/wet mobile
computers or batteries. All components must be
dry before connecting to an external power
source.

Radio Devices

This device is an approved radio product. Model: MC9090.
Model Nos: for Regulatory Certifications:

MC9090R1 – Frequency 865.7-867.5 MHz
MC9090R6 – Frequency 902-928 MHz Max
MC9090R8 – Frequency 869.4-869.65 MHz
MC9090R6CN – For China
MC9090Z (MC9090ZU 902-928MHz Max, and
MC9090ZE 865.7 - 867.5MHz )

Bluetooth® Wireless Technology

This is an approved Bluetooth® product. For more information
or to view End Product Listing, please visit:

https://www.bluetooth.org/tpg/listings.cfm.

Power Supply

Use ONLY a LISTED, Type no. 50-14000 (12Vdc/ 3.33A) or
PWRS-14000 (12Vdc/ 3.33A), Direct Plug-In Power supply,
marked Class 2 or LPS (IEC60950-1, SELV). Use of
Alternative Power Supply will invalidate any approvals given
to this unit and may be dangerous.

Wireless Device Country Approvals

Regulatory markings, subject to certification, are applied to
the device signifying the radio(s) is/are approved for use in the
following countries: United States, Canada and Europe 1,2.
Please refer to the Zebra Declaration of Conformity (DoC) for
details of other country markings. This is available at

http://www.zebra.com/doc.

Note1: For 2.4GHz or 5GHz Products: Europe includes,
Austria, Belgium, Bulgaria, Czech Republic, Cyprus,
Denmark, Estonia, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovak Republic, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Note 2: The use of RFID Devices have varying restrictions of
use; please refer to the Zebra Declaration of Conformity
(DoC) for details.

Operation of the device without regulatory
approval is illegal. Select only the country in
which you are using this device. Any other
selection will make the operation of this device
illegal.

Country Roaming

This device incorporates the International Roaming feature
(IEEE802.11d) which will ensure the product operates on the
correct channels for the particular country of use.

Ad-Hoc Operation (802.11a Only)

Ad-Hoc operation is limited to Channels 36-48 (5150-5250
MHz). Use of this band is restricted to Indoor Use Only, any
other use will make the operation of this device illegal.

Frequency of Operation – FCC and IC

The use in the UNII (Unlicensed National Information
Infrastructure) band 1 5150-5250 MHz band is restricted to
Indoor Use Only; any other use will make the operation of this
device illegal.
The available channels for 802.11 b/g operation in the US are
Channels 1 to 11. The range of channels is limited by firmwae.

Industry Canada Statement:

Caution: The device for the band 5150-5250 MHz is only for
indoor usage to reduce potential for harmful interference to
co-Channel mobile satellite systems. High power radars are
allocated as primary users (meaning they have priority) of
5250-5350 MHz and 5650-5850 MHz and these radars could
cause interference and/or damage to LE-LAN devices.
Avertissement: Le dispositive fonctionnant dans la bande
5150-5250 MHz est réservé uniquement pour une utilisation à
l'intérieur afin de réduire les risques de brouillage
préjudiciable aux systèmes de satellites mobiles utilisant les
mêmes canaux.
Les utilisateurs de radars de haute puissance sont désignés
utilisateurs principaux (c.-à-d., qu'ils ont la priorité) pour les
bands 5250-5350 MHz et 5650-5850 MHz et que ces radars
pourraient causer du brouillage et/ou des dommages aux
dispositifs LAN-EL.

Health and Safety Recommendations

Ergonomic Recommendations

CAUTION In order to avoid or minimize the potential risk of

ergonomic injury follow the recommendations
below. Consult with your local Health & Safety
Manager to ensure that you are adhering to your
company’s safety programs to prevent employee
injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Warnings for Use of Wireless Devices

Please observe all warning notices with regard to the usage of
wireless devices.

Potentially Hazardous Atmospheres

You are reminded of the need to observe restrictions on the
use of radio devices in fuel depots, chemical plants etc. and
areas where the air contains chemicals or particles (such as
grain, dust, or metal powders) and any other area where you
would normally be advised to turn off your vehicle engine.

Class 1 Div 2 Product Regulatory Information

The following regulatory statements apply only to the Class 1
Div 2 products. The Class 1 Div 2 products are marked UL
Listed 3JDT. This equipment is suitable for use in Class 1
Division 2, groups A, B, C, and D or non-hazardous locations
only. Use only battery P/N 21-65587-XX or a Zebra approved
equivalent. The Class 1 Div 2 approved headset Part No.
200863-001 is the only Class 1 Div 2 approved accessory.
WARNING - Explosion Hazard - Do not use headsets,
memory cards or other accessories in any hazardous
locations unless they have been Zebra approved and certified
as Class 1 Div 2 devices.
WARNING - Explosion Hazard - Batteries must only be
changed or charged in an area known to be non-hazardous.
WARNING - Explosion Hazard - Components substitution
may impair Class 1, Div 2 suitability.

Pacemakers

Pacemaker manufacturers recommended that a minimum of
15cm (6 inches) be maintained between a handheld wireless
device and a pacemaker to avoid potential interference with
the pacemaker. These recommendations are consistent with
independent research and recommendations by Wireless
Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15cm (6
inches) from their pacemaker when turned ON.

• If you have any reason to suspect that interference is
taking place, turn OFF your device.

Hearing Aids

The wireless device may interfere with some hearing aids. In
the event of interference you may want to consult your
hearing aid supplier to discuss solutions.

Other Medical Devices

Please consult your physician or the manufacturer of the
medical device, to determine if the operation of your wireless
product may interfere with the medical device.

FCC / EU RF Exposure Guidelines

Safety Information

Reducing RF Exposure – Use Properly

Only operate the device in accordance with the instructions
supplied.

International

The device complies with internationally recognized standards
covering human exposure to electromagnetic fields from radio
devices. For information on "International" human exposure to
electromagnetic fields refer to the Zebra Declaration of
Conformity (DoC) at: http://www.zebra.com/doc.

Europe

Handheld Devices

To comply with EU RF exposure requirements, this device
must be operated in the hand with a minimum separation
distance of 23cm or more from a person's body. Other
operating configurations should be avoided.

Industry Canada Statement

Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set
forth foa na uncontrolled environment. This equipment should
be installed and operated with minimum distance 23cm
between the radiator and your body.
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs
mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux
rayonnements IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un
minimum de 23 cm de distance entre la source de
rayonnement et votre corps.

Laser Devices

Complies with 21CFR1040.10 and 1040.11 except for
deviations pursuant to Laser Notice No. 50, dated June 24,

2007.

EN60825-1: 2007
IEC60825-1 (Ed. 2.0)
The laser classification is marked on one of the labels on the
device.

CAUTION Use of controls, adjustments or performance of

procedures other than those specified herein
may result in hazardous laser light exposure.

Class 2 laser scanners use a low power, visible light diode. As
with any very bright light source, such as the sun, the user

should avoid staring directly into the light beam. Momentary
exposure to a Class 2 laser is not known to be harmful.

Scanner Labeling

CAUTION - CLASS 3R LASER LIGHT WHEN OPEN. AVOID DIRECT EYE EXPOSURE
ATTENTION - LUMIÈRE LASER DE CLASSE 3R, EN CAS D'OUVERTURE. EXPOSITION
DANGEREUSE AU FAISCEAU VORSICHT - LASERLICHT KLASSE 3R, WENN
ABDECKUNG GEÖFFNET. DIREKTE BESTRAHLUNG DER AUGEN VERMEIDEN.

Batteries

Taiwan - Recycling

EPA (Environmental Protection
Administration) requires dry battery
producing or importing firms in
accordance with Article 15 of the Waste
Disposal Act are required to indicate the recycling marks on
the batteries used in sales, giveaway or promotion. Contact a
qualified Taiwanese recycler for proper battery disposal.

Battery Information

Zebra rechargeable battery packs are designed and
constructed to the highest standards within the industry.
However, there are limitations to how long a battery can
operate or be stored before needing replacement. Many
factors affect the actual life cycle of a battery pack, such as
heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some
irreversible deterioration in overall battery quality may occur.
Store batteries at half of full charge in a dry, cool place,
removed from the equipment to prevent loss of capacity,
rusting of metallic parts and electrolyte leakage. When storing
batteries for one year or longer, they should be charged and
discharged at least once a year. If an electrolyte leakage is
observed, avoid any contact with affected area and properly
dispose of the battery. Batteries must be charged within the
32° to 104° F (0° to +40° C) ambient temperature range.
Replace the battery when a significant loss of run time is
detected.
Standard warranty period for all Zebra batteries is 30 days,
regardless if the battery was purchased separately or included
as part of the mobile computer.

CAUTION Risk of explosion if battery is replaced by an

Battery Safety Guidelines

• The area in which the units are charged should be clear of
debris and combustible materials or chemicals. Particular
care should be taken where the device is charged in a non
commercial environment.

• Follow battery usage, storage, and charging guidelines
found in the user's guide.

• Improper battery use may result in a fire, explosion, or
other hazard.

• To charge the mobile device battery, the battery and
charger temperatures must be between +32 ºF and +104
ºF (0 ºC and +40 ºC)

• Do not use incompatible batteries and chargers. Use of an
incompatible battery or charger may present a risk of fire,
explosion, leakage, or other hazard. If you have any

incorrect type.
Dispose of batteries according to instructions.

questions about the compatibility of a battery or a charger,
contact Zebra support.

• For devices that utilize a USB port as a charging source,
the device shall only be connected to products that bear
the USB-IF logo or have completed the USB-IF
compliance program.

• [For WAN devices requiring compliance to IEEE 1725,
provide an explanation of security implementation, per
IEEE 1725 clause 10.2.1, that provides a method of
authentication that ensures compatibility between a
specific host device and the battery.]

• Do not disassemble or open, crush, bend or deform,
puncture, or shred.

• Severe impact from dropping any battery-operated device
on a hard surface could cause the battery to overheat.

• Do not short circuit a battery or allow metallic or conductive
objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert foreign
objects into the battery, immerse or expose to water or
other liquids, or expose to fire, explosion, or other hazard.

• Do not leave or store the equipment in or near areas that
might get very hot, such as in a parked vehicle or near a
radiator or other heat source. Do not place battery into a
microwave oven or dryer.

• Battery usage by children should be supervised.

• Please follow local regulations to promptly dispose of used
re-chargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery has been
swallowed.

• In the event of a battery leak, do not allow the liquid to
come in contact with the skin or eyes. If contact has been
made, wash the affected area with large amounts of water
and seek medical advice.

• If you suspect damage to your equipment or battery,
contact Zebra support to arrange for inspection.

Radio Frequency Interference Requirements­FCC

Note: This equipment has been tested and
found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and

receiver

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician

for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.

Radio Frequency Interference Requirements­Canada

This Class B digital apparatus complies with Canadian ICES-

003.
Cet appareil numérique de la classe B est conforme à la
norme NMB-003 du Canada.

Radio Transmitters

For RLAN Devices:
The use of 5 GHz RLAN's, for use in Canada, have the
following restrictions:

• Restricted Band 5.60 - 5.65 GHz
This device complies with RSS 210 of Industry Canada.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
Ce dispositif est conforme à la norme CNR-210 d'Industrie
Canada applicable aux appareils radio exempts de licence.
Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage
reçu, y compris un brouillage susceptible de provoquer un
fonctionnement indésirable.
Label Marking: The Term "IC:" before the radio certification
only signifies that Industry Canada technical specifications
were met.

Marking and European Economic Area
(EEA)

The use of 2.4GHz RLAN’s, for use through the EEA, have
the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the
frequency range 2.400 -2.4835 GHz.

• Maximum radiated transmit power of 2W ERP in the
frequency range 865.6-867.6MHz

The use of 5GHz RLANs has varying restrictions for use
within the EEA; please refer to the Zebra Declaration of
Conformity (DoC) for details at: http://www.zebra.com/doc.
Bluetooth® Wireless Technology for use through the EEA has
the following restrictions:

• Maximum radiated transmit power of 100mW EIRP in the
frequency range 2.400 -2.4835 GHz

RFID Devices, for use through the EEA, operating in the

869.4 – 869.65 MHz frequency band have the following

restrictions:

• Maximum radiated transmit power of 500mW ERP with a
10% Duty Cycle in the frequency range 869.4 -

869.65MHz.

Statement of Compliance

Zebra hereby, declares that this device is in compliance with
the essential requirements and other relevant provisions of
Directives 1999/5/EC and 2011/65/EU. Declaration of
Conformities may be obtained from: http://www.zebra.com/

doc.

Korea Warning Statement for Class B ITE

韥눺 ꩡ끞녅껽驩ꓭ

%鞾韥韥
閵뇊끞
ꗞꭖ뭪겕韥韥 

Other Countries

Ukraine

This equipment corresponds to requirements of the Technical
Regulation No. 1057, 2008 on restrictions as to the use of some
dangerous substances in electric and electronic devices.

Mexico

Restrict Frequency Range to: 2.450 - 2.4835 GHz.

Sri Lanka

Restrict Frequency Range to: 2.400 - 2.430 GHz.

Declarações Regulamentares para MC9090

Nota: "A marca de certificação se aplica ao Transceptor,
modelo MC9090. Este equipamento opera em caráter
secundário, isto é, não tem direito a proteção contra
interferência prejudicial, mesmo de estações do mesmo tipo,
e não pode causar interferência a sistemas operando em
caráter primário.”
Para maiores informações sobre ANATEL consulte o site:
www.anatel.gov.br

넩 韥韥鱉 閵뇊끞 % 鞾  냱ꈑ 놹녅볁놶뼞麦ꈒ냹 뼑
韥韥ꈑ꫑늱ꈑ閵뇊꾅꫑ꩡ끞뼍鱉阸냹ꑞ놶 냱ꈑ
뼍ꐥ ꑝ麕덵꾢꾅꫑ꩡ끞뼕ꯍ넽걪鱽鲙 

Taiwan

South Korea

Waste Electrical and Electronic
Equipment (WEEE)

English: For EU Customers: All products at the end of their life must be
returned to Zebra for recycling. For information on how to return product,
please go to: http://www.zebra.com/weee.

Bulgarish: За клиенти от ЕС: След края на полезния им живот
всички продукти трябва да се връщат на Zebra за рециклиране. За
информация относно връщането на продукти, моля отидете на
адрес: http://www.zebra.com/weee.

Čeština: Pro zákazníky z EU: Všechny produkty je nutné po skonèení
jejich životnosti vrátit spoleènosti Zebra k recyklaci. Informace o zpùsobu
vrácení produktu najdete na webové stránce:
http://www.zebra.com/weee.
Dansk: Til kunder i EU: Alle produkter skal returneres til Zebra til recirku­lering, når de er udtjent. Læs oplysningerne om returnering af produkter
på: http://www.zebra.com/weee.
Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende
ihrer Lebensdauer zum Recycling an Zebra zurückgesandt werden.
Informationen zur Rücksendung von Produkten finden Sie unter:
http://www.zebra.com/weee.

Ελληνικά: Για πελάτες στην Ε.Ε.: Όλα τα προϊόντα, στο τέλος της
διάρκειας ζωής τους, πρέπει να επιστρέφονται στην Zebra για
ανακύκλωση. Για περισσότερες πληροφορίες σχετικά με την επιστροφή
ενός προϊόντος, επισκεφθείτε τη διεύθυνση http://www.zebra.com/weee
στο Διαδίκτυο.

Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada
taaskasutamise eesmärgil Zebra'ile. Lisainformatsiooni saamiseks toote
tagastamise kohta külastage palun aadressi:
http://www.zebra.com/weee.
Español: Para clientes en la Unión Europea: todos los productos
deberán entregarse a Zebra al final de su ciclo de vida para que sean
reciclados. Si desea más información sobre cómo devolver un producto,
visite: http://www.zebra.com/weee.
Français : Clients de l'Union Européenne : Tous les produits en fin de
cycle de vie doivent être retournés à Zebra pour recyclage. Pour de plus
amples informations sur le retour de produits, consultez:
http://www.zebra.com/weee.
Italiano: per i clienti dell'UE: tutti i prodotti che sono giunti al termine del
rispettivo ciclo di vita devono essere restituiti a Zebra al fine di consen­tirne il riciclaggio. Per informazioni sulle modalità di restituzione, visitare
il seguente sito Web: http://www.zebra.com/weee.
Latviešu: ES klientiem: visi produkti pēc to kalpošanas mūža beigām ir
jānogādā atpakaļ Zebra otrreizējai pārstrādei. Lai iegūtu informāciju par
produktu nogādāšanu Zebra, lūdzu, skatiet: http://www.zebra.com/weee.

ų: ES vartotojams: visi gaminiai, pasibaigus jų eksploatacijos lai-

Lietuvi

kui, turi būti grąžinti utilizuoti į kompaniją „Zebra“. Daugiau informacijos,
kaip grąžinti gaminį, rasite: http://www.zebra.com/weee.
Magyar: Az EU-ban vásárlóknak: Minden tönkrement terméket a Zebra
vállalathoz kell eljuttatni újrahasznosítás céljából. A termék visszajut­tatásának módjával kapcsolatos tudnivalókért látogasson el a:
http://www.zebra.com/weee weboldalra.
Malti: Għal klijenti fl-UE: il-prodotti kollha li jkunu waslu fl-aħħar tal-ħajja
ta' l-użu tagħhom, iridu jiġu rritornati għand Zebra għar-riċiklaġġ. Għal
aktar tagħrif dwar kif għandek tirritorna l-prodott, jekk jogħġbok żur:
http://www.zebra.com/weee.
Nederlands: Voor klanten in de EU: alle producten dienen aan het einde
van hun levensduur naar Zebra te worden teruggezonden voor recycling.
Raadpleeg http://www.zebra.com/weee voor meer informatie over het
terugzenden van producten.
Polski: Klienci z obszaru Unii Europejskiej: Produkty wycofane z eksp­loatacji nale¿y zwróciæ do firmy Zebra w celu ich utylizacji. Informacje
na temat zwrotu produktów znajduj¹ siê na stronie internetowej
http://www.zebra.com/weee.
Português: Para clientes da UE: todos os produtos no fim de vida
devem ser devolvidos à Zebra para reciclagem. Para obter informações
sobre como devolver o produto, visite: http://www.zebra.com/weee.
Românesc: Pentru clienţii din UE: Toate produsele, la sfârşitul duratei
lor de funcţionare, trebuie returnate la Zebra pentru reciclare. Pentru
informaţii despre returnarea produsului, accesaţi:
http://www.zebra.com/weee.

Slovenčina: Pre zákazníkov z krajín EU: Všetky výrobky musia byť po
uplynutí doby ich životnosti vrátené spoločnosti Zebra na recykláciu.
Bližšie informácie o vrátení výrobkov nájdete na:
http://www.zebra.com/weee.

Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske
dobe vrniti podjetju Zebra za reciklažo. Za informacije o vraèilu izdelka
obišèite: http://www.zebra.com/weee.

Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautet­tava kierrätettäväksi Zebra-yhtiöön, kun tuotetta ei enää käytetä. Lisäti­etoja tuotteen palauttamisesta on osoitteessa
http://www.zebra.com/weee.
Svenska: För kunder inom EU: Alla produkter som uppnått sin livslängd
måste returneras till Zebra för återvinning. Information om hur du return­erar produkten finns på http://www.zebra.com/weee.
Türkçe: AB Müşterileri için: Kullanım süresi dolan tüm ürünler geri
dönüştürme için Zebra'ya iade edilmelidir. Ürünlerin nasıl iade edileceği
hakkında bilgi için lütfen şu adresi ziyaret edin:
http://www.zebra.com/weee.

Turkish WEEE Statement of Compliance

EEE Yönetmeli?ine Uygundur

End-user License Agreement

These license terms are an agreement between you and
zebra Technologies, Inc. (“Company”). Please read them.
They apply to the software included on this device. The
software also includes any separate media on which you
received the software.

The software on this device includes software licensed by
Company from Microsoft Corporation or its affiliate.

The terms also apply to any

• updates,

• supplements,

• Internet-based services, and

• support services

for this software, unless other terms accompany those items. If so,
those terms apply.

As described below, using some features also operates as your
consent to the transmission of certain standard computer
information for Internet-based services.

By using the software, including use on this device, you accept
these terms. If you do not accept them, do not use the device or
software. Instead, contact Company to determine its return policy
for a refund or credit.
WARNING: If the software contains voice operated technologies,
then operating this software requires user attention. Diverting
attention away from the road while driving can possibly cause an
accident or other serious consequence. Even occasional, short
diversions of attention can be dangerous if your attention is
diverted away from your driving task at a critical time. Company
and Microsoft make no representations, warranties or other
determinations that ANY use of this software is legal, safe, or in
any manner recommended or intended while driving or otherwise
operating a motor vehicle.
If you comply with these license terms, you have the rights below.

1. USE RIGHTS.
You may use the software on the device with which you acquired
the software.

2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE
RIGHTS.

a.Specific Use. Company designed this device for a specific

use. You may only use the software for that use.

b.Included Microsoft Programs and Additional Required

Licenses. Except as provided below, these license terms
apply to all Microsoft programs included with the software. If
the license terms with any of those programs give you other
rights that do not expressly conflict with these license terms,
you also have those rights.

i. This agreement does not grant you any rights with respect

to the Windows Mobile Device Center, Microsoft ActiveSync
or Microsoft Outlook 2007 Trial which are subject to the
licenses accompanying those items.

c. Speech Recognition. If the software includes speech

recognition component(s), you understand that speech
recognition is an inherently statistical process and that
recognition errors are inherent in the process. Neither
Company nor Microsoft or their suppliers shall be liable for
any damages arising out of errors in the speech recognition
process.

d.Phone Functionality. If the device software includes phone

functionality, all or certain portions of the device software
may be inoperable if you do not have and maintain a
service account with a wireless telecommunication carrier
(“Mobile Operator”), or if the Mobile Operator’s network is
not operating or configured to operate with the device.

3. SCOPE OF LICENSE. The software is licensed, not sold. This
agreement only gives you some rights to use the software.
Company and Microsoft reserve all other rights. Unless applicable
law gives you more rights despite this limitation, you may use the
software only as expressly permitted in this agreement. In doing
so, you must comply with any technical limitations in the software
that allow you to use it only in certain ways. You may not:

• work around any technical limitations in the software;

• reverse engineer, decompile or disassemble the software;

• make more copies of the software than specified in this
agreement;

• publish the software for others to copy;

• rent, lease or lend the software; or

• use the software for commercial software hosting services.

Except as expressly provided in this agreement, rights to access
the software on this device do not give you any right to implement
Microsoft patents or other Microsoft intellectual property in
software or devices that access this device.
You may use remote access technologies in the software such as
Remote Desktop Mobile to access the software remotely from a
computer or server. You are responsible for obtaining any licenses
required for use of the protocols to access other software.

4. INTERNET-BASED SERVICES. Microsoft provides Internet-

based services with the software. Microsoft may change or cancel
them at any time.

a.Consent for Internet-Based Services. The software

features described below connect to Microsoft or service
provider computer systems over the Internet. In some cases,
you will not receive a separate notice when they connect. You
may switch off some of these features or not use them. For
more information about these features, visit http://
go.microsoft.com/fwlink/?LinkId=81931.

By using these features, you consent to the transmission
of this information. Microsoft does not use the information to

identify or contact you.
Device Information. The following features use Internet
protocols, which send to the appropriate systems device
information, such as your Internet protocol address, the type of
operating system, browser and name and version of the
software you are using, and the language code of the device
where you installed the software. Microsoft uses this
information to make the Internet-based services available to
you.

• Windows Mobile Update Feature. The Windows Mobile

Update feature provides you the ability to obtain and install
software updates on your device if updates are available.
You may choose not to use this feature. Company and/or
your Mobile Operator may not support this feature or an
update for your device.

• Windows Media Digital Rights Management. Content

owners use Windows Media digital rights management
technology (WMDRM) to protect their intellectual property,
including copyrights. This software and third party software
use WMDRM to play and copy WMDRM-protected content.
If the software fails to protect the content, content owners
may ask Microsoft to revoke the software’s ability to use
WMDRM to play or copy protected content. Revocation does
not affect other content. When you download licenses for
protected content, you agree that Microsoft may include a
revocation list with the licenses. Content owners may require
you to upgrade WMDRM to access their content. Microsoft
software that includes WMDRM will ask for your consent
prior to the upgrade. If you decline an upgrade, you will not
be able to access content that requires the upgrade.

b.Misuse of Internet-based Services. You may not use these

services in any way that could harm them or impair anyone
else’s use of them. You may not use the services to try to gain
unauthorized access to any service, data, account or network
by any means.

5. NOTICES ABOUT THE MPEG-4 VISUAL STANDARD. The

software may include MPEG-4 visual decoding technology. This
technology is a format for data compression of video information.
MPEG LA, L.L.C. requires this notice:

USE OF THIS PRODUCT IN ANY MANNER THAT
COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS
PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO
(A) DATA OR INFORMATION (i) GENERATED BY AND
OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT
THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND
(ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES
SPECIFICALLY AND SEPARATELY LICENSED BY MPEG
LA, L.L.C.

If you have questions about the MPEG-4 visual standard,
please contact MPEG LA, L.L.C., 250 Steele Street, Suite 300,
Denver, CO 80206; www.mpegla.com.

6. DIGITAL CERTIFICATES. The software uses digital certificates
in X.509 format. These digital certificates are used for
authentication.

7. CONNECTIVITY SOFTWARE. Your device package may
include Windows Mobile Device Center or Microsoft ActiveSync
software. If it is included, then you may install and use it in
accordance with the license terms that are provided with it. If no
license terms are provided, then you may install and use only one
(1) copy of the software on a single computer.

8. NETWORK ACCESS. If you are using a network, such as an
employer network, the network administrator may limit features or
functionality on your device.

9. PRODUCT SUPPORT. Contact Company for support options.
Refer to the support number provided with the device.

10. LINKS TO THIRD PARTY WEBSITES. If the software
provides links to third party websites, those links are provided to
you only as a convenience, and the inclusion of any link does not
imply an endorsement of the third party website by Microsoft.

11. BACKUP COPY. You may make one backup copy of the
software. You may use it only to reinstall the software on the
device.

12. PROOF OF LICENSE. If you acquired the software on the
device, or on a disc or other media, a genuine Certificate of
Authenticity label with a genuine copy of the software identifies
licensed software. To be valid, this label must be affixed to the
device, or included on or in Company’s software packaging. If you
receive the label separately, it is not valid. You should keep the
label on the device or packaging to prove that you are licensed to
use the software. To identify genuine Microsoft software, see

http://www.howtotell.com.

13. TRANSFER TO A THIRD PARTY. You may transfer the
software only with the device, the Certificate of Authenticity label,
and these license terms directly to a third party. Before the
transfer, that party must agree that these license terms apply to
the transfer and use of the software. You may not retain any
copies of the software including the backup copy.

14. NOT FAULT TOLERANT. The software is not fault tolerant.
Company installed the software on the device and is responsible
for how it operates on the device.

15. RESTRICTED USE. The Microsoft software was designed for
systems that do not require fail-safe performance. You may not
use the Microsoft software in any device or system in which a
malfunction of the software would result in foreseeable risk of
injury or death to any person. This includes operation of nuclear
facilities, aircraft navigation or communication systems and air
traffic control.

16. NO WARRANTIES FOR THE SOFTWARE. The software is
provided “as is”. You bear all risks of using it. Microsoft gives no
express warranties, guarantees or conditions. Any warranties you
receive regarding the device or the software do not originate from,
and are not binding on, Microsoft or its affiliates. When allowed by
your local laws, Company and Microsoft exclude implied
warranties of merchantability, fitness for a particular purpose and
non-infringement.

17. LIABILITY LIMITATIONS. You can recover from Microsoft and
its affiliates only direct damages up to fifty U.S. Dollars (U.S.
$50.00), or equivalent in local currency. You cannot recover any
other damages, including consequential, lost profits, special,
indirect or incidental damages.

This limitation applies to:

• anything related to the software, services, content
(including code) on third party internet sites, or third party
programs, and

• claims for breach of contract, breach of warranty,
guarantee or condition, strict liability, negligence, or other
tort to the extent permitted by applicable law.

It also applies even if Microsoft should have been aware of the
possibility of the damages. The above limitation may not apply to
you because your country may not allow the exclusion or limitation
of incidental, consequential or other damages.

18. EXPORT RESTRICTIONS. The software is subject to United

States export laws and regulations. You must comply with all
domestic and international export laws and regulations that apply
to the software. These laws include restrictions on destinations,
end users and end use. For additional information, see

www.microsoft.com/exporting.

Software Support

Zebra wants to ensure that customers have the latest release
of entitled software at the time of product purchase.

To confirm that your Zebra device shipped with the latest
release of entitled software, visit:

http://www.zebra.com/support.

Check for the latest software from Software Downloads >
Product Line/Product > Go.

If your device does not have the latest entitled software
release as of your product purchase date, please e-mail a
request to Zebra at: [e-mail].

You must include the following essential device information
with your request:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are requesting.

If it is determined by Zebra that your device is entitled to the
latest software release, you will receive an e-mail containing a
link directing you to a Zebra website to download the
appropriate software.

Service Information

If you have a problem using the equipment, contact your
facility’s Technical or Systems Support. If there is a problem
with the equipment, they will contact Zebra Support at:

http://www.zebra.com/support.

For the latest version of this guide go to:

http://www.zebra.com/support.