Zebra MC9060-G RFID Handheld Mobile Computer MC906R-G Licensing, Patent and Regulatory Information for Windows CE.Net English

Revision A — April 2005
72-68921-02

For the latest version of this guide go to: http://www.symbol.com/manuals.

Licensing, Patent and Regulatory Information

For Embedded Windows® CE .NET

MC906R-G RFID

© 2004-2005 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or

design.
Symbol does not assume any product liability arising out of, or in connection with, the

application or use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any
patent right or patent, covering or relating to any combination, system, apparatus, machine,

material, method, or process in which Symbol products might be used. An implied license
exists only for equipment, circuits, and subsystems contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other
product names mentioned in this manual may be trademarks or registered trademarks of their
respective companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300

http://www.symbol.com

Patents

This product is covered by one or more of the patents listed on the Web site:

www.symbol.com/patents.

Warranty

For the complete Symbol hardware product warranty statement, go to:

http://www.symbol.com/warranty.

[phone]
Contact local distributor or call

[phone] Outside US
1-800-347-0178 Inside US

Inside Spain 91 324 40 00

Canada 905-629-7226

1-631-738-2400

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the

recommendations below. Consult with your local Health & Safety Manager to
ensure that you are adhering to your company's safety programs to prevent
employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural/neutral position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Regulatory Information

All Symbol devices are designed to be compliant with rules and regulations in locations they
are sold and will be labeled as required. Any changes or modifications to Symbol
Technologies equipment, not expressly approved by Symbol Technologies, could void the
user's authority to operate the equipment. Antenna's, use only the supplied or an approved
replacement antenna. Unauthorized antennas, modifications, or attachments could cause
damage and may violate regulations.

Distributor Operations
Europe/Mid-East

Sales Support
Latin America

Sweden/Sverige 08 445 29 00 Outside Spain [phone]

South Africa 11-809 5311 Spain/España
Netherlands/Nederland 315-271700 Norway/Norge [phone]
Italy/Italia 2-484441 Mexico/México 5-520-1835
France 01-40-96-52-21 Germany/Deutschland 6074-49020
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
Australia 1-800-672-906 Austria/Österreich 01-5055794-0
United Kingdom 0800 328 2424 Asia/Pacific [phone]

Taiwanese recycler for proper battery disposal.
recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified
firms in accordance with Article 15 of the Waste Disposal Act are required to indicate the
EPA (Environmental Protection Administration) requires dry battery producing or importing

United States 1-800-653-5350

there is a problem with the equipment, they will contact the Symbol Support Center:
If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support. If

Before you use the unit, it must be configured to operate in your facility’s network and run your applications.

Service Information

Taiwan

between +32° F and +104° F (0° C and +40° C).
To charge the battery for the mobile device, battery and charger temperatures must be

Battery Charging Note

Radio Modules

This device contains an approved radio module. This module is identified below:

• Symbol RLAN (11Mbps DSSS) radio module, Type: 21-64436.

Power Supply

Use only a Symbol-approved power supply output rated 11-16 Vdc and minimum 2A. The
power supply is certified to EN60950 with SELV outputs. Use of alternative power supply will
invalidate any approval given to this device and may be dangerous.
Benutzen Sie nur eine Symbol Technologies genehmigt in den Ausgabe: 11-16Vdc und
minimum 2A. Die Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben.

FCC RF Exposure Guidelines

Reducing RF Influence - Use Properly

It is advisable to use the device only in the normal operating position and it is recommended
that no part of the human body be allowed to come too close to the antenna during operation
of the equipment.

Handheld Devices

To comply with FCC RF exposure requirements, this device must be operated in the hand and
must operate with a minimum separation distance of 20 cm or more from a person's body.
Other operating configurations should be avoided.

Laser Devices

Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-

1:1994+A11:1996. The laser classification is marked on one of the labels on the device.

Class 1 Laser devices are not considered to be hazardous when used for their intended

purpose. The following statement is required to comply with US and international

regulations:

Caution: Use of controls, adjustments or performance of procedures other than those

specified herein may result in hazardous laser light exposure.

• Class 2 laser scanners use a low power, visible light diode. As with any very
bright light source, such as the sun, the user should avoid staring directly into
the light beam. Momentary exposure to a Class 2 laser is not known to be
harmful.

Laser Labels

In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to
the user:

ENGLISH HEBREW

CLASS 1 CLASS 1 LASER PRODUCT
CLASS 2 LASER LIGHT

DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT

DANISH / DANSK ITALIAN / ITALIANO

KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE 1PRODOTTO AL LASER DI CLASSE 1
KLASSE 2 LASERLYF CLASSE 2LUCE LASER

SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIOPRODOTTO
KLASSE 2 LASERPRODUKT AL LASER DI CLASSE 2

DUTCH / NEDERLANDS NORWEGIAN / NORSK

KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 1LASERPRODUKT, KLASSE 1
KLASSE 2 LASERLICHT KLASSE 2LASERLYS IKKE STIRR INN I LYSSTRÅLEN

NIET IN STRAAL STAREN LASERPRODUKT, KLASSE 2
KLASSE-2 LASERPRODUKT

Radio Frequency Interference Requirements

Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Scanner Labeling

LASERLICHT - NICHT IN DEN STRAHL BLICKEN.

LE FAISCEAU APPAREIL  LASER DE CLASSE 2.

CAUTION-LASER LIGHT. DO NOT STARE INTO BEAM.

LASER KLASSE 2

LUMI¨RE LASER -NE PAS REGARDER DANS

CLASS 2 LASER PRODUCT 630-680 nM, 1 mW

FINNISH / SUOMI PORTUGUESE / PORTUGUÊS
LUOKKA 1 LUOKKA 1 LASERTUOTE CLASSE 1PRODUTO LASER DA CLASSE 1
LUOKKA 2 LASERVALO CLASSE 2LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO

ÄLÄ TUIJOTA SÄDETTÄ PRODUTO LASER DA CLASSE 2
LUOKKA 2 LASERTUOTE

FRENCH / FRANÇAIS SPANISH / ESPAÑOL
CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASE 1 PRODUCTO LASER DE LA CLASE 1
CLASSE 2 LUMIERE LASER CLASE 2 LUZ LASER

NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2 PRODUCTO LASER DE LA CLASE 2

GERMAN / DEUTCH SWEDISH / SVENSKA

KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASS 1 LASERPRODUKT KLASS 1
KLASSE 2 LASERSTRAHLEN KLASS 2 LASERLJUS STIRRA INTE MOT STRÅLEN

NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT KLASS 2
LASERPRODUKT DER KLASSE 2

JAPANESE / ᣣᧄ⺆
ࠢ࡜ࠬޓࠢ࡜ࠬ࡟࡯ࠩ⵾ຠ
ࠢ࡜ࠬޓ࡟࡯ࠩశ✢
  శ✢ࠍ⋥ⷞߒߥ޿ߢߊߛߐ޿
  ࠢ࡜ࠬ࡟࡯ࠩ⵾ຠ

KOREAN /G䞲ῃ㠊
X❇ G X❇ G⩞㧊㩖G㩲䛞
Y❇ G ⩞㧊㩖Gὧ㍶
GG 㧊Gὧ㍶㦚G㭒㔲䞮㰖GⰞ㕃㔲㡺U
GG Y❇ G⩞㧊㩖Gὧ㍶

CHINESE / ㅔԧЁ᭛

1㉏ 1㉏▔ܝѻક
2㉏ ▔ܝ

ߛ࣓⊼㾚ܝᴳ

2㉏▔ܝѻક

Radio Transmitters

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this
device must accept any interference received, including interference that may cause
undesired operation.

Label Marking: The Term "IC:" before the radio certification only signifies that Industry
Canada technical specifications were met.

Battery Information

Symbol rechargeable battery packs are designed and constructed to the highest standards
within the industry.
However, there are limitations to how long a battery can operate or be stored before needing
replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold,
harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall
battery quality may occur. Store batteries discharged in a dry, cool place, removed from the
equipment to prevent loss of capacity, rusting of metallic parts and electrolyte leakage.
When storing batteries for one year or longer, they should be charged and discharged at least
once a year. If an electrolyte leakage is observed, avoid any contact with affected area and
properly dispose of the battery.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was
purchased separately or included as part of the mobile computer or bar code scanner. For
more information on Symbol batteries, please visit:
http:/mysymbolcare.symbol.com/battery/batbasics1.html.