Zanussi ZWX 1606 W, ZWX 1506 W User Manual

WASHING MACHINE

1200 900 700 500

Delicates

60°C 50°C

95°C

40°C

Extra Quick

Prewash

30°C

Wool

On/Off

Cottons

Synthetics

40° AA

Skip

Start/ Pause

Rinse Hold

Reset

Temp.

Spin

ZWX 1606 W

Prewash Wash Rinse

Rinse Hold

Drain

Filter

Spin

End

1600 aquacycle 6 kg

ZWX 1506 W ZWX 1606 W

132987030

Quick Installation Guide:

visit our WEB SITE to view an install video

www.video.uk.electrolux.com

INSTRUCTION BOOKLET

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

●

Installation

●

This appliance is heavy. Care should be taken when moving it.

●

It is dangerous to alter the specifications or attempt to modify this product in any way.

●

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.

●

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

●

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

●

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

●

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

Child Safety

●

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

●

Pets and children have been known to climb into washing machines. Please check your drum before use.

●

The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.

Keep all packaging well away from children.

●

Keep all detergents in a safe place out of children’s

●

reach.

Use

Do not overload the appliance. See relevant section in the instruction book.

●

Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.

●

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

●

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

●

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

●

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

●

Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

●

As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

●

Leave the porthole door slightly ajar between washes to preserve the door seal.

●

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

●

Always unplug the appliance and turn off the water supply after use.

Contents

For the User

Important Safety Information Your New Washing Machine Description of the Appliance

Detergent dispenser drawer 5 Child safety feature 5

The Control Panel Operating Sequence

Load the laundry 9 Measure out the detergent 9 Measure out the fabric softener 9 Switch the machine on 9 Select the desired programme/fabric 9 Select the temperature 9 Select the spin speed or the Rinse Hold option 10 Select the desired options 10 Start the programme 10 How to change a programme during its cycle 10 How to cancel a programme during its cycle 10 How to open the door during the cycle of

a programme 10-11 End of programme 11

Washing Hints

Which detergent?.... 13

And in which form? 13

Wash Care Symbols Washing Programmes

6-8

9-11

12-13

Maintenance and Cleaning

Descaling 16

After each wash 16 Maintenance Wash 16

External cleaning 16

Cleaning the dispenser drawer 16 Cleaning the drawer recess 16 Cleaning the pump 16-17 Cleaning the water inlet filter 17 The dangers of freezing 17 Emergency emptying out 18

Something Not Working Service and Spare Parts Guarantee Conditions

For the Installer

Installation Instructions Technical Specifications

Unpacking 23 Positioning 23 Water inlet 24 Water drainage 24-25 Levelling 25 Special conditions 25 In the interest of the environment 26 Electrical connection 26-27 Permanent connection 27

16-18

19-20

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions Hints and tips Environmental information

Your New Washing Machine

Your new washing machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.

●

Automatic cooling of the wash water to 60°C

before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.

●

The special wool programme with its new delicate wash system treats your woollens with extreme care.

●

The balance control device ensures that the washing machine remains stable when spinning.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

●

Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).

●

The machine works more economically if it is fully loaded.

●

With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

●

Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.

In the interest of the environment

●

Materials marked with the symbol are recyclable.

●

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

●

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

●

Help to keep your country tidy - use authorised disposal sites for your old appliance.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin.

If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed “Something Not Working”.

Description of the Appliance

1200 900 700 500

Delicates

60°C 50°C

95°C

40°C

Extra Quick

Prewash

30°C

Wool

On/Off

Cottons

Synthetics

40° AA

Skip

Start/

Pause

Rinse Hold

Reset

ZWX 1606 W

Prewash Wash Rinse

Rinse Hold

Drain

Filter

Spin

End

1600 aquacycle 6 kg

C0063

P1131

This new machine meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

• The possibility of selecting the temperature and all the options offered by this washing machine gives you truly “customised” washing.

• The automatic cooling of the washing water from 95° to 60°C before draining reduces thermal shock to fabrics, helping to prevent creasing.

• The ECO valve allows total use of detergent and reduces water consumption so saving energy.

• The balance control device prevents vibration during spinning.

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Drain pump

5 Adjustable feet

Detergent dispenser drawer

Prewash

Main wash

Fabric softener

Child safety feature

This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.

The Control Panel

123456 789

1600

900

700

500

Delicates

60°C

50°C

95°C

40°C

Extra

Quick

Prewash

30°C

Wool

On/Off

Cottons

Synthetics

40° AA

Skip

Start/

Pause

Rinse Hold

Reset

Temp.

Spin

ZWX 1

606 W

Prewash Wash

Rinse

Rinse Hold

Spin

Drain

Filter

End

ZWX 1606 W

1 “On/Off” button

Press this button to switch the washing machine on. Press the ON/OFF button again to switch the machine off.

2 MAINS-ON light

This light is connected to the ON/OFF button. It lights up when you press the button, and goes out when you press it again.

3 FABRICS button

Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.

4 “Temp.” button

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light up. Maximum temperatures are 95°C for cotton, 60°C for synthetic fabrics, 40°C for delicate fabrics and wool.

IMPORTANT!

By pressing the TEMPERATURE and SPIN SPEED buttons simultaneously for about 3 secondes, the acoustic signal is deactivated at the end of the cycle, when selecting the programmes and in case of an incorrect option selection . By pressing these 2 buttons again the acoustic signal is reactivated.

5 “Spin” button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up.

Maximum speeds are:

• for cotton: 1600 rpm (ZWX 1606 W) or 1500 rpm

(ZWX 1506W);

• for synthetic fabrics and wool: 900 rpm;

• for delicate fabrics: 700 rpm.

“Rinse Hold” position: when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry.

At the end of the cycle, the light of the “Start/Pause” button goes out, the “End” and “Rinse Hold” lights illuminate to indicate that the water must be drained. To complete the cycle, first press “Skip/Reset” button and then choose one of the following options:

• Drain only:

- Press FABRICS button in order to select the desired programme and press 3 times “Skip/Reset” button until only the “Drain” light illuminates. Then depress “Start/Pause” button.

• Drain and Spin:

Prewash Wash

Rinse

Rinse Hold

Spin

Drain

Filter

End

- Choose the previously selected programme by means of the FABRICS button, afterwards change the spin speed if needed, by means of the “Spin” button and then press “Skip/Reset” button twice until only the “Spin”

light illuminates and then depress

“Start/Pause” button.

6 OPTIONS button

Press this button to select the following options:

● Prewash: select this option if you wish your laundry

to be prewashed before the main wash (not available

for wool).

The prewash ends with a short spin in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

● Extra Quick: select this option for laundry that is

only slightly soiled (not for Wool programme). The washing time will be reduced according to the type of fabric and the selected temperature.

● 40° AA: this option can be selected for cottons and

synthetics lightly or normally soiled with a temperature of 40°C or higher. If you select 40°C together with option 40° AA, the machine will prolong the time at 40°C in the washing phase. On cotton programme this will allow an AA class in energy efficiency and washing performance to be achieved. If you select 95°C, 60°C or 50°C and press the 40° AA button, the washing temperature will be reduced and the washing time will be prolonged.

The Prewash, the Extra Quick and the 40° AA options cannot be selected together by means of the relevant button.

7 “Start/Pause” button

This button has two functions:

• Start: after you have selected the desired programme

and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit.

• Pause: when you press this button again, the

programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.

Important! You must set the washing machine to Pause before you make any change in the programme

in progress.

8 “Skip/Reset” button

At the end of a programme, you must press this button once or repeatedly, in order to clear the contents of the memory; otherwise, the next time you switch the washing machine on, the audible warning signals relevant to the end of the previous cycle will be given.

You can also press the “Skip/Reset” button to exclude one or several phases of the programme which is running, as indicated below.

- set the washing machine to Pause by pressing the “Start/Pause” button (the relevant light will flash);

- press the “Skip/Reset” button once or several times, until the required phase(s) is(are) cancelled (the light next to the symbol of the phase(s) will go out).

Example:

In this case, the spin (at

the speed provided for the selected type of fabric) will be performed.

This button allows you also to select special programmes, such as Rinse, Spin and Drain.

• If the machine is already switched on because it has

just performed a washing programme, proceed as follows:

- depress “Skip/Reset” button once or repeatedly to

cancel the previously performed programme (all the phase indicator lights must be off);

- select the type of fabric by means of the relevant

button;

- select the special programme:

• Rinse and Spin

Depress “Skip/Reset” once, the “Wash” pilot light goes out.

• Spin

Depress “Skip/Reset” twice, the pilot lights “Wash” and “Rinse” go out.

•Drain

Prewash Wash

Rinse

Rinse Hold

Spin

Drain

Filter

End

Prewash Wash

Rinse

Rinse Hold

Spin

Drain

Filter

End

Depress “Skip/Reset” three times, the pilot lights “Wash”, “Rinse”and “Spin” go out.

Example:

In this case the machine will perform the rinses and spin.

9 Programme phase indicator

lights

When you select a programme, the lights relevant to the phases that form the programme light up.

• If the machine is switched off:

- depress “On/Off” button to switch it on;

- select the type of fabric by means of the relevant button:

- select the special programme as previously described.

After you have started the programme, only the light relevant to the phase that is currently being carried out will remain lit.

At the end of the programme the “End “pilot light illuminates.

If the “Filter” light lights up at the end of the programme this means that the drain pump is clogged.

In the event of operating problems the “End “pilot light starts to flash:

1 flash = the machine does not fill

2 flashes = the machine does not empty

4 flashes = the door has not been closed

To eliminate the problem, see paragraph “Something not working”.

Operating Sequence

P0004

60°C

50°C

95°C

40°C

30°C

Temp.

Prewash Wash

Rinse

Rinse Hold

Spin

Drain

Filter

End

Delicates

Wool

Cottons

Synthetics

Before the first wash we recommend that you pour 2 litres of water into the main wash compartment of the detergent drawer in order to activate the ECO valve. Then run a cotton cycle at 95°C, with the machine empty, in order to remove any manufacturing residue from the drum and tub. Pour half a measure of detergent into the main wash compartment and start up the machine.

1.Load the laundry

Open the door.

Place the laundry in the drum, one item at a time, shaking them out as much as possible.

Close the door.

4. Switch the machine on

Press the ON/OFF button to switch the machine on: the light above the button will light up.

5. Select the desired programme/ fabric

Press the FABRICS button repeatedly, in order to select the desired programme/fabric. The relevant light will light up.

The lights relevant to the phases that form the programme will light up.

The “Start/Pause” button light will start flashing.

2.Measure out the detergent

Pull out the dispenser drawer until it stops. Measure out the amount of detergent required and pour it into the main wash compartment .

If you wish to carry out the prewash, pour detergent into the appropriate compartment marked .

3.Measure out the fabric softener

If required, pour fabric softener into the compartment marked , without exceeding the «MAX» mark.

C0064

C0065

6. Select the temperature

Press the “Temp.” button if you wish to select a temperature value different from the one proposed by the washing machine. The relevant light will light up.

Close the drawer gently.

+ 19 hidden pages