Zanussi ZWG 7120 P, ZWG 7140 P User Manual
EN
User manual
Washing Machine
ZWG 7120 P
ZWG 7140 P
Contents
Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2
Frost precaution _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4
Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 6
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Safety information
Important! Read carefully and keep for future reference.
• The safety of your appliance complies w ith the industry
standards and with legal requirements on the safety of
appliances. However, as manufacturers, we feel it is
our duty to provide the following safety notes.
• It is most important that this instruction book should
be retained with the appliance for future reference.
Should the appliance be sold or transferred to another
owner, or should you move house and leave the appliance, always ensure that the book is supplied with
the appliance in order that the new owner can get to
know the functioning of the appliance and the relevant
warnings.
• You MUST read them carefully before installing or using the appliance.
• Before first starting up, check the appliance for any
damage incurred during transport. Never connect up a
damaged appliance . If parts are damaged, contact your
supplier.
• If the appliance is delivered in the winter months when
there are minus temperatures. Store it at room temperature for 24 hours before using for the first time.
• This appliance is made for use in a normal domestic
situation. The manufacturer is not responsible for
freezing damages. Read "Frost precaution".
General safety
• It is dangerous to alter the specifications or attempt to
modify this product in any way.
• During high temperature wash programmes the door
glass may get hot. Do not touch it!
• Make sure that small children and pets do not climb
into the drum. To avoid this, please check inside the
drum before using.
Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19
Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 22
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 24
Subject to change without notice
• Any objects such as coins, safety pins, nails, screws,
stones or any other hard, sharp material can cause
extensive damage and must not be placed into the appliance.
• Only use the advised quantities of fabric softener and
detergent. Damage to the fabric can ensue if you overfill. Refer to the manufacturer’s recommendations of
quantities.
• Wash small items such as socks, laces, washable belts
etc in a washing bag or pillow case as it is possible for
such items to slip down between the tub and the inner
drum.
• Do not use your appliance to wash articles with whalebones, material without hems or torn material.
• Always unplug the appliance and turn off the water
supply after use, cleaning and maintenance.
• Under no circumstances should you attempt to repair
the appliance yourself. Repairs carried out by inexperienced people may cause injury or serious malfunctioning. Contact your local Service Centre. Always insist on genuine spare parts.
Installation
• This appliance is heavy. Care should be taken when
moving it.
• All packing and transit bolts must be removed before
use. Serious damage can occur to the product and to
property if this is not adhered to. See relevant section
in the user manual.
• This appliance is free standing only. DO NOT build it
in under a counter and DO NOT remove the worktop
for any reason.
• After having installed the appliance, check that it is not
standing on the inlet and drain hose and the worktop
2
is not pressing the electrical supply cable against the
wall.
• Install the appliance on a flat hard floor.
• Never place cardboard, wood or similar materials under the appliance to compensate for any unevenness
in the floor.
• If the appliance is situated on a carpeted floor, please
adjust the feet in order to allow air to circulate freely
under the appliance.
• Check that the appliance does not touch the wall or
other kitchen units.
• This appliance must be connected to a cold water supply.
• Do not use the hose from your previous appliance to
connect to water supply. Always use the hose supplied
with the appliance.
• The inlet hose must not be lengthened. If it is too short
and you do not wish to move the tap, you will have to
purchase a new, longer hose specially designed for
this type of use.
• Always be sure, that there is no water leakage from
hoses and their connections after the installation.
• If the appliance is installed in a location subject to frost,
please read the “Frost precaution” chapter. Manufacturer decline any responsibility for freezing damages.
• Any plumbing work required to install this appliance
should be carried out by a qualified plumber or competent person.
• Any electrical work required to install this appliance
should be carried out by a qualified electrician or competent person.
Use
• This appliance is designed for domestic use. It must
not be used for purposes other than those for which it
was designed.
• Only wash fabrics which are designed to be machine
washed. Follow the instructions on each garment label.
• Do not overload the appliance. See the "Washing Programme Chart".
• Before washing, ensure that all pockets are empty and
buttons and zips are fastened. Avoid washing frayed or
torn articles and treat stains such as paint, ink, rust,
and grass before washing. Underwired bras must NOT
be machine washed.
• The detergent dispenser drawer is provided with an
insert for liquid detergent. Do not use the insert downwards for gelatinous detergents, with programmes including prewash, with the delay start option. In all these
cases you can use metering balls or sachets provided
with the detergent, Take out the metering aid at the end
of the washing cycle.
• Garments which have been in contact with volatile petroleum products should not be machine washed. If
volatile cleaning fluids are used, care should be taken
to ensure that the fluid is removed from the garment
before placing in the appliance.
• Never pull the power supply cable to remove the plug
from the socket; always take hold of the plug itself.
• Never use the appliance if the power supply cable, the
control panel, the working surface or the base are
damaged so that the inside of the appliance is accessible.
Child safety
• This appliance is not intended for use by people (including children) with reduced physical sensory or
mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
• Children should be supervised to ensure that they do
not play with the appliance.
• The packaging components (e.g. plastic film, polystyrene) can be dangerous to children - danger of suffocation! Keep them out of children’s reach.
• Keep all detergents in a safe place out of children’s
reach.
• Make sure that children or pets do not climb inside the
drum. To prevent children and pets becoming trapped
inside the drum this appliance incorporates a special
feature.
3
To activate this device, rotate the button (without
pressing it) inside the
door clockwise until the
groove is horizontal. If
necessary use a coin.
Frost precaution
To disable this device and
restore the possibility of
closing the door, rotate the
button anti-clockwise until the groove is vertical.
If the appliance is installed in a place where the temperature could drop below 0°C, proceed as follows to remove
any water remaining inside the appliance:
1. unplug the appliance;
2. turn off the water tap;
3. unscrew the water inlet hose from the tap;
4. unscrew the drain hose from the rear support and
unhook it from sink or spigot;
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please
5. place a bowl on the floor;
6. let the drain hose run along the floor, place the external extremities of the drain and inlet hoses in the
bowl placed on the floor and let water drain out completely;
7. screw the water inlet hose to the tap and the drain
hose to the rear of the appliance again;
When you intend to start the appliance up again, make
sure that the room temperature is above 0°C.
contact your local council, your household waste disposal
service or the shop where you purchased the product.
Packaging materials
The materials marked with the symbol are recyclable.
>PE<=polyethylene
>PS<=polystyrene
>PP<=polypropylene
This means that they can be recycled by disposing of them
properly in appropriate collection containers.
4
Ecological hints
To save water, energy and to help protect the environment,
we recommend that you follow these tips:
• Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the
environment is protected too!).
• The machine works more economically if it is fully
loaded.
Product description
• With adequate pre-treatment, stains and limited soiling
can be removed; the laundry can then be washed at a
lower temperature.
• Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry
being washed.
1 2 3
1
Detergent dispenser drawer
2
Worktop
3
Control panel
4
Door opening handle
5
Rating plate (on the inner edge)
6
Front adjustable feet
7
11
8
9
4
5
6
9
7
Water drain hose
8
Drain hose support
9
Hose holders
10
Water inlet hose
11
Mains cable
12
Back adjustable feet
9
10
12
Technical data
Dimensions Width
Height
Depth
Electrical connection Information on the electrical connection is given on the rating plate, on the
inner edge of the appliance door.
60 cm
85 cm
50 cm
5
Water supply pressure Minimum
Maximum
Maximum Load Cotton 6 kg
Spin Speed Maximum 1200 rpm (ZWG7120P)
0,05 MPa
0,8 MPa
1400 rpm (ZWG7140P)
Installation
Unpacking
Warning!
• Read carefully the "Safety information" chapter
before installing the appliance.
x 3
A
C
to be transported again.
Necessary tools
B
x 3
x 1
x 2
Warning! Remove and keep all transit devices so
that they can be refitted if the appliance ever has
10 mm
• Remove the cardboard top.
• Remove the polystyrene packaging materials.
• Spread the front piece
1
• Remove the polystyrene base from the bottom.
on the floor behind the
appliance and then lay
the appliance carefully
2
rear side down on it.
Make sure that no hoses are crushed in the
process.
• Return appliance to it's
upright position.
30 mm
• Remove the external
film. Use a cutter, if
necessary.
6
• Open the door and remove the plastic hose
guide, the bag containing the instruction
booklet and the plastic
plug caps from the
drum.
• Remove the power supply cable and the draining and
inlet hose from the hose holders ( C ) on the rear of
the appliance.
• Unscrew the three bolts ( A ) and remove the hose
holders ( C ).
• Slide out the relevant plastic spacers ( B ).
• Plug the smaller upper hole and the two large ones
with the corresponding plastic plug caps.
Positioning and levelling
x 4
Level the appliance by raising or lowering the feet.
The appliance MUST be level and stable on a flat hard
floor. If necessary, check the setting with a spirit level.
Any necessary adjustment can be made with a spanner.
7
Accurate levelling prevents vibration, noise and displacement of the appliance during operation.
Repeat the levelling action, if the appliance is not level
and stable.
Water inlet
Firstly form a hook in the end of the drain hose using
the plastic hose guide supplied with the appliance .
The end of the drain hose can be positioned in three
ways:
• Hooked over the edge of a sink using the plastic hose
guide.
Connect the hose to a tap
with a 3/4” thread.
35°
Loosen the ring nut to angle the hose to the left or right
depending on the position of your water tap. Do not
place the inlet hose downwards. After positioning the
inlet hose, be sure to tighten the ring nut again to prevent leaks.
Water drainage
45°
Tie the plastic hose guide to the tap with a string to
prevent that the drain hose unhooks when the appliance
is emptying.
• Onto a sink outlet spigot.
Push the drain hose onto the spigot and secure with a
clip, ensure a loop is formed in the drain hose to prevent
waste from the sink entering the appliance.
If the outlet spigot has not been used before, remove
any blanking plug that may be in place.
• Directly into a drain pipe at a height of not less than
60 cm and not more than 100 cm.
The end of the drain hose
must always be ventilated ,
i.e. the inside diameter of
the drain pipe must be
MAX 100cm
larger than the outside diameter of the drain hose.
The drain hose must not
be kinked.
• Directly to a built-in drain pipe in the room wall.
8
Connections overview
max 100 cm
min. 60 cm
The drain hose may be extended to a maximum of
4 metres. An additional drain hose and joining piece
is available from your Local Centre.
115 cm 140 cm
mc9 0 mc115
mc150mc100
max 100 cm
min. 60 cm
Electrical connection
• The appliance must be earthed.
• Make sure that the electrical information on the rating
plate agree with your domestic power supply.
• Always use a correctly installed shockproof socket.
• Do not use multi-way plugs, connectors and extension
cables. There is a risk of fire.
• Do not replace or modify the mains cable yourself.
Contact the After Sales Service.
• Make sure that the mains plug and cable is not squashed or damaged by the back of the appliance.
• The mains plug must be accessible without moving
machine to enable electrical isolation of appliance prior to cleaning or service.
• Do not pull the mains cable to disconnect the appliance. Always pull the mains plug.
• This appliance complies with the E.E.C. Directives.
Warning! The appliance is supplied with a 13 amp
plug attached. Use a 13 amp ASTA approved (BS
1362) fuse if it is necessary to change the fuse in the plug
supplied. A cut off plug inserted into a 13 amp socket is
a serious safety danger. Make sure that it is disposed of
safely.
9
First use
• Ensure that the electrical and water connections
comply with the installation instructions.
• Ensure that the drum is empty.
• Before the first wash, run a cotton cycle at the
highest temperature without any laundry in the
Personalisation
Buzzer
The appliance is provided with an acoustic device, which
sounds in the following cases:
• at the end of the cycle;
• if there is a fault.
By pressing the 4 and 5 buttons simultaneously for about
6 seconds , the acoustic signal is deactivated (except if
there is a fault). By pressing these 2 buttons again, the
acoustic signal is reactivated.
Child safety lock
This device permits you to leave the appliance unattended
so you do not need to worry that children might be injured
by or cause damage to the appliance. This function remains enabled also when the appliance is not working.
Daily use
Sort out the laundry
Follow the wash code symbols on each garment label and
the manufacturer’s washing instructions. Sort the laundry
as follows: whites, coloureds, synthetics, delicates , woollens.
Before Loading The Laundry
Important! Make sure that
no metal objects are left in
the laundry (e.g. hair clips,
safety pins, pins). Button
up pillowcases, close zip
fasteners, hooks and poppers. Tie any belts or long
tapes. Remove any hooks
(e.g curtains).
• Never wash whites and coloureds together. Whites may
lose their «whiteness» in the wash.
machine, to remove any manufacturing residue
from the drum and tub. Pour 1/2 a measure of
detergent into the main wash compartment and
start the machine.
There are two different ways to set this option:
1. Before pressing button 9 : it will be impossible to start
the appliance.
2. After pressing button 9 : it will be impossible to
change any other programme or option.
To enable or disable this
option press simultaneously for about 6 seconds
buttons 2 and 3 until on
the display, the icon
appears or disappears.
• New coloured items may run in the first wash; they
should therefore be washed separately the first time.
• Rub particularly soiled areas with a special detergent
or detergent paste.
• Treat curtains with special care.
• Wash the socks and the gloves inside the bag or a net.
Remove stubborn stains before washing:
Blood : treat fresh stains with cold water. For dried stains,
soak overnight in water with a special detergent then rub
in the soap and water.
Oil based paint : moisten with benzine stain remover, lay
the garment on a soft cloth and dab the stain; treat several
times.
Dried grease stains : moisten with turpentine, lay the garment on a soft surface and dab the stain with the fingertips
and a cotton cloth.
Rust : oxalic acid dissolved in hot water or a rust removing
product used cold. Be careful with rust stains which are
10
Loading...