Zanussi ZWF1231 User Manual

WASHING MACHINE

ZWF 1231 W - ZWF 1431 W

ZWF 1431 S - ZWF 1631 W

Start/ Pause

1200 900 700 500

Synthetics

60°C 50°C

95°C

40°C

Extra Quick

Prewash

Wash Rinses Spin

Drain

30°C

Delicate

On/Off

Cotton Daily

Cottons

Super Rinse

Delay

40° AA

Skip

Wool/ Handwash

Rinse Hold

Reset

Prewash

ZWF 1231 W

Intensive

JETSYSTEM

INSTRUCTION BOOKLET

132 983 870

Quick Installation Guide:

visit our WEB SITE to view an install video

www .video.uk.electr olux.com

Installation

●

This appliance is heavy. Care should be taken when moving it.

●

It is dangerous to alter the specifications or attempt to modify this product in any way.

●

All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in instructions.

●

Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person.

●

Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person.

●

Care must be taken to ensure that the appliance does not stand on the electrical supply cable.

●

If the machine is situated on a carpeted floor, please adjust the feet in order to allow air to circulate freely.

●

Always be sure, that there is no water leakage from hoses and their connections after the installation.

Child Safety

●

This appliance is designed to be operated by adults. Children should not be allowed to tamper with the controls or play with the product.

●

Pets and children have been known to climb into washing machines. Please check your drum before use.

●

The glass door becomes very hot during the washing cycle. Keep children away from the vicinity of the appliance whilst it is in operation.

●

Keep all packaging well away from children.

●

Keep all detergents in a safe place out of children’s reach.

Use

●

Always unplug the appliance and turn off the water supply after use.

●

Do not overload the appliance. See relevant section in the instruction book.

●

Only wash fabrics which are designed to be machine washed. If in doubt, consult the care label on the clothes.

●

Before washing, ensure that all pockets are empty and buttons and zips are fastened. Avoid washing frayed or torn articles and treat stains such as paint, ink, rust, and grass before washing. Underwired bras must NOT be machine washed.

●

Any objects such as coins, safety pins, nails, screws, stones or any other hard, sharp material can cause extensive damage and must not be placed into the machine.

●

Garments which have been in contact with volatile petroleum products should not be machine washed. If volatile cleaning fluids are used, care should be taken to ensure that the fluid is removed from the garment before placing in the machine.

●

Wash small items such as socks, laces, washable belts etc in a washing bag or pillow case as it is possible for such items to slip down between the tub and the inner drum.

●

Only use the advised quantities of fabric softener. Damage to the fabric can ensue if you over-fill. Refer to the manufacturer’s recommendations of quantities.

●

As some duvets and eiderdowns should be washed in large commercial machines because of their bulk, please check with the manufacturer of the item before washing in a domestic machine.

●

Leave the porthole door slightly ajar between washes to preserve the door seal.

●

Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.

Important Safety Information

It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant warnings.

These warnings have been provided in the interest of safety. You MUST read them carefully before installing or using the appliance.

Contents

For the User

Important Safety Information

Your New Washing Machine

Description of the Appliance

5 Detergent dispenser drawer 5 Child safety feature 5

The Control Panel

6-10

Turning the acoustic signal off 6

Operating Sequence

11-13 Load the laundry 11 Measure out the detergent 11 Measure out the fabric softener 11 Switch the machine on 11 Select the required programme/fabric 11 Select the temperature 11-12 Select the spin speed or the Rinse Hold option 12 Select the desired options 12 Select the Super Rinse or 40°AA option 12 Select the Delay Start 12 Start the programme 13 How to change a programme during its cycle 13 How to cancel a programme during its cycle 13 How to open the door during the cycle of

a programme 13 End of programme 13

Washing Hints

14-15

Which detergent?.... 15

And in which form? 15

Wash Care Symbols

Washing Programmes

Maintenance and Cleaning

18-19 Descaling 18 After each wash 18 Maintenance Wash 18 External cleaning 18 Cleaning the dispenser drawer 18 Cleaning the drawer recess 18 Cleaning the pump 18-19 Cleaning the water inlet filter 19 The dangers of freezing 19 Emergency emptying out 19

Something Not Working

20-21

Service and Spare Parts

21-22

Guarantee Conditions

For the Installer

Installation Instructions

Technical Specifications

23 Unpacking 24 Positioning 24 Water inlet 25 Water drainage 25-26 Levelling 26 Special conditions 26 In the interest of the environment 26-27 Electrical connection 27

Guide to use the Instruction Book

The following symbols will be found in the text to guide you throughout the instructions:

Safety instructions Hints and tips Environmental information

Your New Washing Machine

Your new washing machine, which is fitted with the New Jet System, meets all modern requirements for effective treatment of laundry with low water, energy and detergent consumption.

Even small loads are washed “economically” because the amount of water used is regulated automatically according to the load and type of fabric.

●

Automatic cooling of the wash water to 60°C

before draining, with the 95°C programme. This reduces thermal shock to fabrics, helping to prevent creasing.

●

The special wool programme with its new delicate wash system treats your woollens with extreme care.

●

The balance control device ensures that the washing machine remains stable when spinning.

Ecological hints

To save water and energy and help protect the environment, we recommend that you follow these hints:

●

Normally soiled laundry may be washed without prewashing in order to save detergent, water and time (the environment is protected too!).

●

The machine works more economically if it is fully loaded.

●

With adequate pre-treatment, stains and limited soiling can be removed; the laundry can then be washed at a lower temperature.

●

Measure out detergent according to the water hardness, the degree of soiling and the quantity of laundry being washed.

In the interest of the environment

●

Materials marked with the symbol are recyclable.

●

Check with your local Council or Environmental Health Office to see if there are facilities in your area for re-cycling this appliance.

●

When the appliance is to be scrapped, cut off the power supply cable and make the door lock device unusable to prevent young children from being trapped inside.

●

Help to keep your country tidy - use authorised disposal sites for your old appliance.

The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

How do we help to protect the environment? We use recycled paper!

Important

Your machine is fitted with a balance control device, which ensures the machine is stable during the spin. If the wash load appears not to have been spun sufficiently at the end of the wash cycle, because it is not evenly distributed in the drum, the balance control device may have operated. It will therefore be necessary to redistribute the wash load manually and select a spin programme. For more detailed information see the section headed “Something Not Working”.

Description of the Appliance

1 Detergent dispenser drawer 2 Control panel 3 Door opening handle 4 Drain pump 5 Adjustable feet

Detergent dispenser drawer

Prewash Main wash Fabric softener

Child safety feature

This machine incorporates a special child safety feature to prevent small children from being trapped inside the machine. To activate this device, rotate the button (without pressing it) inside the door clockwise until the groove is horizontal. If necessary use a coin. To disable this device and restore the possibility of closing the door, rotate the button anti-clockwise until the groove is vertical.

JETSYSTEM

ZWF 1231 W

Prewash

95°C

Cotton Daily

1200 900

Cottons

60°C

700

50°C

Synthetics

40°C

500

Delicate

On/Off

Wool/

30°C

Rinse Hold

Handwash

in p S

. p

Prewash Wash

Super

Intensive

Delay

Rinses

Rinse

Spin

Start/

Skip

Extra

Drain

40° AA

Quick

Pause

Reset

C0063

P1131

1 “On/Off” button

Press this button to switch the washing machine on. The display (8) will show three flashing dashes or a flashing zero. You will find more detailed explanations on pages 7 & 8 (see “Display”). Press the On/Off button again to switch the machine off.

2 MAINS-ON light

This light is connected to the “On/Off” button. It lights up when you press the button, and goes out when you press it again.

3 FABRICS button

Press this button repeatedly to select the programme on the basis of the type of laundry to be washed. The light relevant to the selected programme will light up. The washing machine will propose a temperature and automatically select the maximum spin value provided for the programme you have chosen. You can change these values by operating buttons 4 and 5.

Cotton daily

To be used for lightly soiled cotton items in order to obtain a good washing performance in a short time.

Wool / Handwash

When you select this programme, you obtain a particularly delicate wash, suitable for articles of clothing whose label indicates that they must be handwashed .

The Control Panel

1200

900

700

500

Synthetics

60°C

50°C

95°C

40°C

Extra

Quick

Prewash

Wash

Rinses

Spin

Drain

30°C

Delicate

On/Off

Cotton Daily

Cottons

Tem p.

Spin

Super Rinse

Delay

40° A A

Skip

Wool / Handwash

Start/

Pause

Rinse Hold

Reset

Prewash

ZWF 1231 W

Intensive

12345678 119

4 “Temp.” button

Press this button repeatedly to increase or decrease the temperature, if you want your laundry to be washed at a temperature different from the one proposed by the washing machine. The relevant light will light up. Maximum temperatures are 95°C for Cottons and “Cotton daily” programme, 60°C for synthetic fabrics, 40°C for delicate fabrics, wool and fabrics to be handwashed (Wool / Handwash programme).

5 “Spin” button

Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the washing machine. The relevant light will light up.

Maximum speeds are:

• for cotton: 1,600, 1,400 or 1,200 rpm depending on the model;

• for synthetic fabrics, wool and fabrics to be handwashed: 900 rpm;

• for delicate fabrics: 700 rpm.

IMPORTANT!

By pressing the “Temp.” and “Spin” buttons simultaneously, the acoustic signal is deactivated at the end of the cycle, when selecting the programmes and in case of an incorrect option selection . By pressing these 2 buttons again the acoustic signal is reactivated.

ZWF 1231 W

• “Rinse Hold” position: when you choose this option, the machine will not drain the water of the last rinse, so as not to crease the laundry . At the end of the cycle, the door is locked, the light of the “Start/Pause” button goes out, a flashing zero will appear on the display and the pilot light of “Rinse Hold” position remains lit, to indicate that the water must be drained and .

To complete the cycle, press “Skip Reset” button once, all the leds are off, the display will show three flashing dashes, then choose one of the following options:

• Drain only: select any washing programme by means of the F ABRICbutton (3) and press repeatedly the “Skip Reset” button until the only led “Drain” on the programme progress display illuminates. Depress “Start/Pause” button.

• Drain and Spin: press FABRICbutton in order to select the desired programme and press the “Skip Reset” button until the only led “Spin” on the programme progress display illuminates. You can change the spin speed by means of “Spin” button if needed, then depress “Start/Pause” button.

6 WASH CHOICE button

Press this button to select the following options:

• Prewash: select this option if you wish your laundry to be prewashed at 30° C before the main wash (not

available for Wool/Handwash programme).

The prewash ends with a short spin at 650 rpm in programmes for cotton and synthetic fabrics, whereas in the programme for delicate fabrics the water is only drained.

• Intensive: this option can be selected for heavily soiled laundry. If you depress this button the washing intensity will be increased and the washing time will be prolonged by few minutes depending on the selected type of fabric. This option can be selected with all cottons and synthetic programmes except for Cotton Daily programme.

The Intensive and the 40° AA options cannot be selected together.

• Extra Quick: select this option for laundry that is

only slightly soiled (not available for Cottons Daily

and Wool/Handwash programmes or in combination with the 40° AA option).

The washing time will be reduced according to the type of fabric and the selected temperature.

The Prewash, the Intensive and the Extra Quick options cannot be selected together by means of the same button.

7 OPTIONS button

Press this button to select the following options:

• Super Rinse: this option can be selected with all programmes except the Wool/Handwash programme. The machine will add 2 rinses to the cotton programmes and 1 rinse to the synthetic and delicate programmes. This option is recommended for people who are allergic to detergents, and in areas where the water is very soft.

• 40° AA: this option can be selected for Cottons and

Synthetics lightly or normally soiled with a temperature of 40°C or higher. The washing temperature will be reduced and the washing time will be prolonged in order to achieve an AA class in energy efficiency and washing performance (not available for Cottons Daily

programme or in combination with the Intensive and Extra Quick options).

The Super Rinse and the 40° AA options cannot be selected together by means of the relevant button.

8 Display

The following pieces of information are shown on the display:

• Three flashing dashes, when a programme is cancelled by means of the “Skip Reset” button.

The three flashing dashes will also appear when you press the “On/Off” button to switch the machine on, if the previously selected cycle has been erased.

---

• Delay start, a time value indicated in hours and selected by means of the relevant button (max 23 hours).

The delay time is displayed for 3 seconds, then the duration of the selected programme reappears. After you have pressed the “Start/Pause” button, the delay time value displayed will decrease by units of one hour every hour. When only two hours remain, the display will decrease in 30 minute steps down to zero. You can delay the start of the selected programme by up to 23 hours in one hour intervals.

• An incorrect option selection has been made: this is indicated by the message Err when a function incompatible with the current programme is selected.

The incorrect selection is also indicated by an audible warning signal.

• An alarm code indicates a fault in the machine operation (see the relevant chapter on page 20).

•

Duration of washing programme in hours and

minutes, after you have selected a programme.

While the programme is running (after you have

pressed the “Start/Pause” button), the displayed time value decreases by one unit every minute.

• The washing machine has stopped with water in the tub, at the end of a programme with the “Rinse Hold” option: this is indicated by a flashing zero.

• The washing machine has completed the programme: this is indicated by a flashing zero. The zero will reappear when you switch the washing machine on, unless the previous programme has been erased by means of the “Skip Reset” button.

Important! The first time you use the washing machine, when

you switch it on, it may display a flashing zero and give an audible warning signal. This is due to the fact that the washing machine has performed a washing cycle during the manufacturer’s inspection tests, and this cycle has not been erased after its completion.

2.05

E20

9 “Start/Pause” button

This button has two functions:

• Start: after you have selected the desired programme

and options, press this button to start the washing machine. The light above the button will stop flashing and remain lit.

If you have selected a delay time by means of the “Delay” button, the countdown will begin and will be shown on the display.

• Pause: when you press this button again, the

programme in progress is interrupted. The light above the button will start flashing. To restart the programme, press the button again.

When you PAUSE the cycle, and it becomes possible to open the door, provided

• the washing machine is not in the heating phase;

• the level of the water is not high;

• the drum is not turning.

Important!

You must set the washing machine to Pause before you make any change in the programme in progress.

10 “Skip/Reset” button

This button performs two functions:

- Clears the memory

- Selects special programmes

At the end of every programme the Reset button must be pressed once or repeatedly to clear the programme memory. This will be confirmed by three dashes, flashing in the display. If the previous programme is not cleared, the display will show a “

0” flashing and an audible signal will

sound, when you switch the machine on.

Selecting a special programme:

A wash programme must be selected in the normal way. (“Start/Pause” button not pressed)

Start/

Pause

The “Skip” button is then used to cancel or advance the programme to the required phase. The “Skip” button can only operate during the selection of the programmes or when the programme is in pause.

A normal wash cycle consists of the following phases, Wash - Rinses - Spin and is confirmed by the illumination of the corresponding LED,s.

To select rinses & spin, press the “Skip” button once, the wash LED goes out.

To select spin only, press the “Skip” button twice. The wash & rinses LED,s go out.

Prewash

Wash

Rinses

Spin

Drain

Prewash

Wash

Rinses

Spin

Drain

Prewash

Wash

Rinses

Spin

Drain

+ 20 hidden pages