Zanussi ZHC9141, ZHC6141 User Manual
User
Manual
Bedienungs
anleitung und
Einrichtung
Cooker
Hood
Dunsta-
bzugshaube
Model ZHC6141
Model ZHC9141
EN
Instructions Manual
INDEX
WARNINGS - COMPONENTS...............................................................................................................................................4
INSTALLATION ......................................................................................................................................................................5
USE - MAINTENANCE...........................................................................................................................................................6
2
2
2
DE
Bedienungsanleitung
INHALTSVERZEICHNIS
HINWEIS - KOMPONENTEN.................................................................................................................................................7
MONTAGE..............................................................................................................................................................................8
BEDIENUNG - WARTUNG....................................................................................................................................................9
3
3
EN
WARNINGS - COMPONENTS
WARNINGS
This appli ance has been des igned for use as ei ther an EXTRACTION (ducti ng to the outside) or RECIRCULATION (filtering) hood. The measurements contained on the drawings in this booklet refer to
two models of cooker hood. Therefore, it is essential that you refer to the correct drawing when taking
measurements for installation.
- The minimum distan ce between the cooking surface and the metal grea se filters on the unders ide of the
hood must be 650 mm.
- This cooker hood must be installed in accordance with the installation instructions and all requirements
must be adhered to.
- If the room where the cooker hood is to be used contains a fuel burning appliance such as a central heating boiler th en its flue must be of the room sealed or balance flue type.
- If other types of flue or a ppliances ar e fitted ensure that there is an adequate supply of air to the room.
- When the range hood and appliance supplied with energy other than electricity are simultaneously in operation, the negative pressure in the room must not exceed 4 Pa (4x10-5 bar).
- Exhaust air may be dischar ged in accordance with official and statutory regulations only (e.g. national building regulations).
- The ducting system for this appliance must not be connected to any ventilation system which is being
used for any other purpose.
- The ducting system for this appliance must not be connected to any existing ventilation system which is
being used for any other purpose.
- Do not leave naked flames or carry out flambè cooking under this cooker hood.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilitie s, or lac k of expe rience and k nowledge, unless they have bee n given s upervision o r instruction concerning us e of the appli ance by a person responsible for their safety.
- Children should be super vised to ensure that they do not play with the applia nce
The symbol on the product or on i ts pack agi ng indi cat es t hat thi s pr o duct m ay n ot be tr e ated a s hous ehol d w ast e. I nste ad i t sh all
be handed over to the appl icable c ollectio n point for t he recycli ng of electri cal and electronic equipm ent. By ensur ing this pr oduct is
disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be c aused by inappropriate waste handling of this product. For m ore detailed infor m ation about recycli n g o f thi s pr o duct, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
CONNECTING THE POWER CABLE TO THE MAINS POWER SUPPLY
Before installation, check that the mains voltage indicated on the rating plate inside the appliance corresponds to the voltage available in your home. If the Hood is not fitted with a plug, fit the power cable with
a plug of a type approved for the load indicated on the rating plate; when connecting directly to the mains,
insert an omnipolar circuit breaker with a minimum contact aperture of 3mm and a size suitable for the
load in question between the appliance and the mains supply, making sure it is of a type that complies with
current regulation s.
COMPONENTS
- 2 No Wall Brackets C
- 1 No 150-120mm Ducting Spigot G
- 1 No Air Outlet Connection H (Optional)
- 2 No Charcoal Filters L (Optional)
4
4
Loading...