Zanussi ZDM891W, ZDM891B User Manual

BUILT-IN
DOUBLE OVEN
MODEL ZDM 891
INSTRUCTION BOOKLET
Please read this instruction booklet before using the oven
1
Important Safety Information
You MUST read these warnings carefully before installing or using the oven. If you need assistance, contact our Customer Care Department on 08705 727727
Installation
This oven must be installed by qualified personnel to the relevant British Standards.
This oven is heavy. Take care when moving it.
Remove all packaging, both inside and outside the oven, before using the oven.
Do not attempt to modify the oven in any way.
Child Safety
This oven is designed to be operated by adults. Do not allow children to play near or with the oven.
The oven gets hot when it is in use. Children should be kept away until it has cooled.
During Use
This oven is intended for domestic cooking only. It is not designed for commercial or industrial purposes.
Never line any part of the oven with aluminium foil.
Do not allow heatproof cooking material, e.g. roasting bags, to come into contact with oven elements.
Never place plastic or any other material which may melt in or on the oven.
Do not place sealed cans or aerosols inside the oven. They may explode if they are heated.
Do not hang towels, dishcloths or clothes from the oven or its handle.
Do not use this oven if it is in contact with water and never operate it with wet hands.
Ensure that all control knobs are in the OFF position when not in use.
Do not leave cookware containing foodstuffs, e.g. fat or oil in or on the oven in case it is inadvertently switched ON.
When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the oven.
Maintenance and Cleaning
Only clean this oven in accordance with the instructions.
The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan.
Always allow the oven to cool down and switch off the electrical supply before carrying out any cleaning or maintenance work.
Service
This oven should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.
Environmental Information
After installation, please dispose of the packaging with due regard to safety and the environment.
When disposing of an old appliance, make it unusable, by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.
Take great care when heating fats and oils as they will ignite if they become too hot.
Always use oven gloves to remove and replace food in the oven.
2
Keep this instruction book for future
reference and ensure it is passed on
to any new owner.
For the User
Contents
Important safety information Page 2 Description of the oven Page 4 Control Panel Page 5 The Electronic
Programmer Display Page 6 How to Select a Cooking
Function and Temperature Page 7 How to switch off the oven Page 7 How to Set The Programmer Page 9 Child Safety Page 10 Meat Probe Page 11 Before the First Use Page 13 Using the Oven Page 13 The Fan Oven Page 14 The Conventional Oven Page 17 Cooking Chart Page 18 Defrosting Page 19 Grilling Page 20
Grease Filter Page 25 Care of Catalytic Liners Page 26 Replacing
the Oven Light Page 26 Cleaning
the hinged Grill Page 27 If something goes wrong Page 28 Service and Spare Parts Page 29 Peace of Mind
for 24 months Page 29
For the Installer
Technical Data Page 30 Electrical Connection Page 30 Building In
Page 31
Pizza Oven Page 23 Bread Proving Page 23 Cleaning the Oven Page 24
Guide to Use the instructions
The following symbols will be found in the text to guide you throughout the Instructions:
Safety Instructions
Step by step instructions for an operation
This appliance complies with the following
E.E.C. Directives: * 73/23 - 90/683
(Low VoltageDirective);
* 93/68 (General Directives); * 89/336 (Electromagnetical
Compatibility Directive) . and subsequent modifications
Hints and Tips
i
3
Description of the Oven
Front Panel
Grill Element
Oven Light
Main
Oven
Lower
Oven
Shelf Supports
Fan
Grease Filter
Rating Plate
Grill Element Shelf Supports
Grill/roasting
pan
Shelves (x 4)
Removable
handles
4
Grill trivet
Control Panel
Child Safety Push Button
Oven "OFF" Push Button
PM
Oven
Function
Control
Push button
FUNCTIONS SETTING
Decrease
Push
Button
Increase
Push
Button
CHILD
SAFETY
OFF ON
OVEN
SELECTOR
PROBE
COOK
MINUTE
STOP
TEMP
TIME
MINDER
TIME
Minute Minder Setting Push Button
Oven "ON"
Push Button
Oven Selector
End of Cooking Setting Push Button
Cooking Time Setting Push Button
Push Button
Meat Probe Setting Push Button
Oven "ON" Push Button
The oven must be switched on before setting any cooking function or programme. When the "ON" push button is pressed, the programmer display will show
. This means that
the main oven has been automatically selected.
Oven "OFF" Push Button
To switch off the oven, press the "OFF" push button. Any cooking function or programme will stop, the oven light will go off, and the programmer display will show the time of day.
CHILD
SAFETY OFF ON
CHILD SAFETY OFF ON
SELECTOR
SELECTOR
B U I L T
I N
PROBE
COOK
STOP
OVEN
OVEN
MINUTE
TEMP.
TIME
TIME
MINDER
PROBE
COOK
STOP
MINUTE
TEMP.
TIME
TIME
MINDER
Oven Selector Push Button
To select the main oven or the lower oven, press the "Oven Selector" push button.
When the symbol selected. When the symbol
is displayed, the main oven is
is displayed, the lower
oven is selected.
Oven Function Control Push Button
This large push button marked with allows you to select the cooking function. When the oven is switched on the main oven will automatically be selected. Each time you push this button, the symbol on the programmer display will change, showing what cooking function has been chosen.
Increase and Decrease Push Buttons
The large buttons marked with plus (+) and minus (-)
allow you to increase or decrease temperatures or time settings.
CHILD
SAFETY OFF ON
CHILD SAFETY OFF ON
SELECTOR
SELECTOR
PROBE
COOK
STOP
OVEN
OVEN
MINUTE
TEMP.
TIME
TIME
MINDER
PROBE
COOK
STOP
MINUTE
TEMP.
TIME
TIME
MINDER
5
The Electronic Programmer Display
Technical
Assistance
Needed
Child Safety On
Symbol
Oven Selection
Symbol
Temperature
Display
Time Display
PM
Cooking Function
Symbol
All the oven functions are controlled by an electronic programmer. You can select any combination of cooking function, cooking temperature and automatic timing.
In the event of a power failure, all the settings (time of day, program setting or program in
i
operation), will be cancelled. When the power is restored, the numbers on the display will flash, and the clock-timer has to be reset.
How to set the Time of Day
The oven is has a 24 hour clock. When the oven is first connected to the electrical supply, the display will automatically show 12:00. To set the correct time of day:
Time Symbol
Meat Probe
Symbol
Cooking
Minute Minder
Symbol
End Of
Cooking
Symbol
1) press the "Cook Time" and the "Stop Time"
buttons at the same time,
2) release the buttons
3) within 3 seconds, press either the
"Decrease" or "Increase" large push buttons, until the time of day is displayed. If no button is pressed within 3 seconds, the clock will automatically revert back to 12:00
NOTE
: In the event of a power failure, the clock will
revert to 12:00 and will require resetting.
6
CHILD
SAFETY OFF ON
OVEN
SELECTOR
PROBE
TEMP.
COOK
TIME
STOP TIME
MINUTE MINDER
How to select a Cooking Function and Temperature
The main oven has 10 different cooking functions. The lower oven has four cooking functions. For each of them, a pre-set temperature will be automatically selected.
1) Switch on the oven by pressing the "ON"
button. The symbol
will come on to
indicate that the main oven has been selected. To change the oven selection press the "Oven Selector" push button.
2) Press the Oven Function Control button until the required function is shown on the display.
3) If the pre-set temperature is not suitable, select the required temperature using the "Increase" or "Decrease" buttons.
After a few seconds, the temperature display will show the current temperature of the oven cavity.
How to switch off the oven
To switch off the oven, press the "OFF" push button. Any cooking function or programme will stop, the oven light will go off, and the programmer display will show the time of day.
SAFETY OFF ON
CHILD
SAFETY OFF ON
CHILD
OVEN
SELECTOR
OVEN
SELECTOR
PROBE
TEMP.
PROBE TEMP.
COOK
COOK
STOP
MINUTE
TIME
TIME
MINDER
STOP
MINUTE
TIME
TIME
MINDER
If both ovens are in use, pressing the "OFF"
i
button will switch off both the ovens.
If both ovens are in use and you wish to switch off one only, proceed as follows:
1) Press the Oven Selector button to select the
oven to be switched off.
2) Press the Oven Function Control push button repeatedly until the function display is blank.
3) After a few seconds, the selected oven will switch off and the function display will revert to the other oven.
CHILD
SAFETY OFF ON
CHILD
SAFETY OFF ON
SELECTOR
OVEN
SELECTOR
OVEN
PROBE
TEMP.
PROBE
TEMP.
COOK
COOK
STOP
MINUTE
TIME
TIME
MINDER
STOP
MINUTE
TIME
TIME
MINDER
7
Main Oven Cooking Function Symbols
Fan cooking - This allows you to roast or roast and bake simoultaneously using any shelf, without flavour transference.
Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.
Grill - The full grill element will be on.
Inner grill element only - Useful for grilling small quantities.
Thermal Grilling - The grill element and the oven fan operate together, circulating hot air around the food.
Pizza Oven - Recommended for pizzas, quiches or pies.
Top heating element - The heat comes from the top of the oven only.
Bottom heating element - The heat comes from the bottom of the oven only.
Bread Proving - To shorten the proving time of bread, pizza dough, etc.
Defrost Setting - This setting is intended to assist in thawing of frozen food.
Low er Ov en Cooking Function Symbols
Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.
Top heating element - The heat comes from the top of the oven only.
Grill - The full grill element will be on.
Inner grill element only - It can be used for grilling small quantities.
8
Ho w to set the minute minder
symbol
will be displayed and the time
display will show ":00".
2) Use the "Increase" or "Decrease" buttons to enter the required time.
At the end of the timed period, an alarm will sound. To switch off the alarm press the "Minute Minder" button.
1) Press the "Minute Minder" button. The
Note
: the Minute Minder function will not switch off
the oven, if in use.
How to programme the oven to switch off only
This is useful if you want to begin cooking immediately but have the oven switch off automatically.
1. Place food in the oven.
2. Switch the oven on, then select the required oven, cooking function and temperature (see previous page).
3. Press the "Cook Time" button. The symbol
will come on and the time display will
show ":00".
4. Use the "Increase" or "Decrease" buttons to enter the required time. The diagram shows the programmer set for 30 minutes.
At the end of the cooking time the oven will switch off and an alarm will sound. To switch off the alarm press the "OFF" button.
CHILD
SAFETY OFF ON
CHILD
SAFETY OFF ON
OVEN
SELECTOR
OVEN
SELECTOR
PROBE
TEMP.
PROBE
TEMP.
COOK
TIME
COOK
TIME
STOP TIME
STOP
TIME
MINUTE MINDER
MINUTE MINDER
How to programme the oven to switch on and off
1. Ensure the clock is showing the right time of day.
2. Carry out steps 1 to 4 as explained in "How to programme the oven to switch of f only"
3. Press the "Stop T ime" button. The symbol
will come on and the time display will
show the time of day.
4. Use the "Increase" or "Decrease" buttons to enter the time when you want the oven to switch off. The diagram shows the oven set to switch off at half past noon.
The oven will switch on automatically at the required time. E.g. if you set the cooking time at 1 hour and the stop time at 7:30 p.m., the oven will switch on at 6:30 p.m. At the end of the cooking time the oven will switch off and an alarm will sound. To switch off the alarm press the "OFF" button.
CHILD
SAFETY OFF ON
OVEN
SELECTOR
PROBE
TEMP.
COOK
TIME
STOP TIME
MINUTE MINDER
9
Automatic switch off
Should you forget to switch the oven off after a programme, or if the "ON" button is pressed accidentally, the oven will switch off automatically. In the case of manual functioning, the programmer will switch the oven off automatically if no other button is activated after a certain time. This time varies according to the temperature setting of the oven, and ranges from a minimum of 2 hours for temperatures above 230°C, up to 8 hours for those below 120°C. At the end of automatic cooking, the oven will switch off after a period of time, this depends on the temperature selected. The time varies between 2 hours for temperatures above 230°C, up 8 hours for those below 120°C.
Child Safety
To avoid children altering a selected programme or temperature, the Child Safety facility can be operated. Press the "Child Safety" button and the "Oven On" button at the same time and keep them pressed for approximately 5 seconds.
The padlock symbol
will be displayed.
It is now only possible to select any programme while simultaneously pressing the "Child safety" button.
To cancel the Child Safety Feature, press the "Oven On" button. Then press button the "Child Safety" button and the "Oven OFF" button at the same time and keep them pressed for approximately 5 seconds. The padlock symbol will disappear from the display.
Call for technical assistance
The programmer display carries out a self check, in order to verify that it is working correctly. If a problem is identified the spanner symbol will be displayed and in the event of a breakdown a NUMBER will appear. If NUMBERS 001 or 002 appear it means that the meat probe is at fault and needs to be replaced; if a higher number appears, please contact your nearest Zanussi Service Force Centre quoting the number of Fault Code.
CHILD
SAFETY OFF ON
OVEN
SELECTOR
PROBE
TEMP.
COOK
TIME
STOP TIME
MINUTE MINDER
NOTE:
Generally after about 8 seconds from pressing a function button the programmer will allow the selected function to operate. Should another button be pressed during the operation of a function, the display will show momentarily details of the function in progress. For the new command to be accepted it will be necessary to press the other button again.
10
Loading...
+ 22 hidden pages