Zanussi ZBM890W, ZBM890B User Manual

BUILT-IN OVEN MODEL ZBM 890

INSTRUCTION BOOKLET

Please read this instruction booklet before using the oven

Important Safety Information

You MUST read these warnings carefully before installing or using the oven. If you need assistance, contact our Customer Care Department on 01635 521313

Installation

• This oven must be installed by qualified personnel to the relevant British Standards.

• This oven is heavy. Take care when moving it.

• Remove all packaging, both inside and outside the oven, before using the oven.

• Do not attempt to modify the oven in any way.

Child Safety

• This oven is designed to be operated by adults. Do not allow children to play near or with the oven.

• The oven gets hot when it is in use. Children should be kept away until it has cooled.

During Use

• This oven is intended for domestic cooking only. It is not designed for commercial or industrial purposes.

• Never line any part of the oven with aluminium foil.

• Do not allow heatproof cooking material, e.g. roasting bags, to come into contact with oven elements.

• Never place plastic or any other material which may melt in or on the oven.

• Do not place sealed cans or aerosols inside the oven. They may explode if they are heated.

• Do not hang towels, dishcloths or clothes from the oven or its handle.

• Do not use this oven if it is in contact with water and never operate it with wet hands.

• Ensure that all control knobs are in the OFF position when not in use.

• Do not leave cookware containing foodstuffs, e.g. fat or oil in or on the oven in case it is inadvertently switched ON.

• When using other electrical appliances, ensure the cable does not come into contact with the hot surfaces of the oven.

Maintenance and Cleaning

• Only clean this oven in accordance with the instructions.

• The oven should be kept clean at all times. A build-up of fats or other foodstuffs could result in a fire, especially in the grill pan.

• Always allow the oven to cool down and switch off the electrical supply before carrying out any cleaning or maintenance work.

Service

• This oven should only be repaired or serviced by an authorised Service Engineer and only genuine approved spare parts should be used.

Environmental Information

• After installation, please dispose of the packaging with due regard to safety and the environment.

• When disposing of an old appliance, make it unusable, by cutting off the cable. Remove any door catches, to prevent small children being trapped inside.

• Take great care when heating fats and oils as they will ignite if they become too hot.

• Always use oven gloves to remove and replace food in the oven.

Keep this instruction book for future

reference and ensure it is passed on

to any new owner.

For the User

Contents

Important safety information Page 3 Description of the oven Page 5 Control Panel Page 6 The Electronic

Programmer Display Page 7 How to Select a Cooking

Function and Temperature Page 8 How to Set The Programmer Page 9 Child Safety Page 10 Meat Probe Page 11 Before the First Use Page 13 Using the Oven Page 13 The Fan Oven Page 15 The Conventional Oven Page 17 Cooking Chart Page 18 Defrosting Page 19 Grilling Page 20

Care of Catalytic Liners Page 26 Replacing

the Oven Light Page 26 Cleaning

the hinged Grill Page 27 If something goes wrong Page 28 Service and Spare Parts Page 29 Peace of Mind

for 24 months Page 29

For the Installer

Technical Data Page 30 Electrical Connection Page 30 Building In

Page 31

Pizza Oven Page 23 Bread Proving Page 23 Cleaning the Oven Page 24 Grease Filter Page 25

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

☞

Step by step instructions for an operation

This appliance complies with the following

E.E.C. Directives: * 73/23 - 90/683

(Low VoltageDirective);

* 93/68 (General Directives); * 89/336 (Electromagnetical

Compatibility Directive) . and subsequent modifications

Hints and Tips

Description of the Oven

Oven 24 hour Clock and Electronic

Programmer

Function

Control

Push button

Decrease

Push

Button

Grill Element

Fan

Rating Plate

CHILD

SAFETY OFF ON

PROBE TEMP.

COOK

STOP

MINUTE

TIME

MINDER

Increase Push Button

Oven Light

Grease Filter

Grill/roasting

pan

Grill trivet

Removable

handles

Anti-tip shelf (x 2)

Control Panel

CHILD

SAFETY OFF ON

PROBE TEMP.

COOK

TIME

STOP TIME

MINUTE MINDER

CHILD

SAFETY OFF ON

PROBE TEMP.

COOK

TIME

STOP TIME

MINUTE MINDER

Oven

Function

Control

Push button

Decrease

Push

Button

Increase

Push

Button

CHILD

SAFETY OFF ON

Child

Safety

Push

Button

Oven "OFF"

Oven "ON" Push Button

PROBE

COOK

STOP

TIME

MINUTE MINDER

TEMP.

Minute Minder Setting Push Button

End of Cooking Setting Push Button

Cooking Time Setting Push Button

Meat Probe Setting Push Button

Push Button

Oven "ON" Push Button

The oven must be switched on before setting any cooking function or programme. When the "ON" push button is pressed, the

programmer display will show The oven light and the cooling fan will come on.

CHILD

SAFETY OFF ON

PROBE

COOK

STOP

MINUTE

TEMP.

TIME

MINDER

Oven "OFF" Push Button

To switch off the oven, press the "OFF" push button. Any cooking function or programme will stop, the oven light will switch off, and the programmer display will show the time of day.

Oven Function Control Push Button

This large push button marked with allows you to select the cooking function. When the oven is switched on the fan cooking function will automatically be selected. Each time you push this button, the symbol on the programmer display will change, showing what cooking function has been chosen.

Increase and Decrease Push Buttons

The large buttons marked with plus (+) and minus (-)

allow you to increase or decrease temperatures or time settings.

CHILD

SAFETY OFF ON

PROBE

TEMP.

COOK

TIME

STOP TIME

MINUTE MINDER

The Electronic Programmer Display

Technical

Assistance

Required

Child Safety On

Symbol

Temperature

Display Time Display

Cooking Function

Symbol

All the oven functions are controlled by an electronic programmer. You can select any combination of cooking function, cooking temperature and automatic timing.

In the event of a power failure, all the settings (time of day, program setting or program in

operation), will be cancelled. When the power is restored, the numbers on the display will flash, and the clock/timer has to be reset.

How to set the Time of Day

The oven has a 24 hour clock. When the oven is first connected to the electrical supply, the display will automatically show 12:00. To set the correct time of day:

Time Symbol

Meat Probe

Symbol

Cooking

Minute Minder

Symbol

End Of

Cooking

Symbol

1) press the "Cook Time" and the "Stop Time"

☞

NOTE

revert to 12:00 and will require resetting.

buttons at the same time,

2) release the buttons

3) within 3 seconds, press either the "Decrease"

or "Increase" large push buttons until the time of day is displayed. If no button is pressed within 3 seconds, the clock will automatically revert back to 12:00

: In the event of a power failure, the clock will

How to select a Cooking Function and Temperature

The oven is provided with 10 different cooking functions. For each of them, a pre-set temperature will be automatically selected.

1) Switch on the oven by pressing the "ON"

☞

button. The Thermoflow function will be automatically selected, and a pre-set temperature of 170° C will be shown on the programmer display.

2) Press the Oven Function Control button until the required function is shown on the display.

3) If the pre-set temperature is not suitable, select the required temperature using the "Increase" or "Decrease" buttons.

After a few seconds, the temperature display will show the current temperature of the oven cavity.

Cooking Function Symbols

Thermoflow - fan cooking - allowing you to roast or roast and bake simoultaneously using any shelf, without flavour transference.

CHILD SAFETY OFF ON

PROBE TEMP.

COOK TIME

STOP

MINUTE

TIME

MINDER

Conventional cooking - The heat comes from both the top and bottom element, ensuring even heating inside the oven.

Grill - The full grill element will be on.

Inner grill element only - useful for grilling small quantities.

Thermal Grilling - The grill element and the oven fan operate together, circulating hot air around the food.

Pizza Oven - Recommended for pizzas, quiches or pies.

Top heating element - The heat comes from the top of the oven only.

Bottom heating element - The heat comes from the bottom of the oven only.

Bread Proving - To shorten the proving time of bread, pizza dough, etc.

Defrost Setting - This setting is intended to assist in thawing of frozen food.

CHILD

SAFETY OFF ON

PROBE

TEMP.

COOK

TIME

STOP TIME

MINUTE MINDER

How to set the minute minder

1) Press the "Minute Minder" button. The

☞

symbol

will cbe displayed and the time

display will show ":00".

2) Use the "Increase" or "Decrease" buttons to enter the required time.

At the end of the timed period, an alarm will sound. To switch off the alarm press the "OFF" button.

How to programme the oven to switch off only

This is useful if you want to begin cooking immediately but have the oven switch off automatically.

1. Place food in the oven.

☞

2. Carry out steps 1 to 3 as explained in "How to select a Cooking Function".

3. Press the "Cook Time" button. The symbol

will come on and the time display will

show ":00".

4. Use the "Increase" or "Decrease" buttons to enter the required time. The diagram shows the programmer set for 30 minutes.

At the end of the cooking time the oven will switch off and an alarm will sound. To switch off the alarm press the "OFF" button.

CHILD

SAFETY OFF ON

PROBE

TEMP.

COOK

TIME

STOP

TIME

MINUTE MINDER

How to programme the oven to switch on and off

☞

1. Ensure the clock is showing the right time of day.

2. Carry out steps 1 to 3 as explained in "How to programme the oven to switch off only"

3. Press the "Stop Time" button. The symbol will come on and the time display will show the

time of day .

4. Use the "Increase" or "Decrease" buttons to enter the time when you want the oven to switch off. The diagram shows the programmer set to switch off the oven at half past noon.

The oven will be switched on automatically at the required time. E.g. if you set the cooking time at 1 hour and the stop time at 7:30 p.m., the oven will switch on at 6:30 p.m. At the end of the cooking time the oven will switch off and an alarm will sound. To switch off the alarm press the "OFF" button.

CHILD

SAFETY OFF ON

PROBE

TEMP.

COOK

TIME

STOP TIME

MINUTE MINDER

Automatic switch off

Should you forget to switch the oven off after a programme, or if the "ON" button is pressed accidentally, the oven will switch off automatically. In fact, in the case of manual functioning, the programmer will switch the oven off automatically if no other button is activated after a certain time. This time varies according to the temperature setting of the oven, and ranges from a minimum of 2 hours for temperatures above 230°C, up to 8 hours for those below 120°C. At the end of automatic cooking, the oven will switch off after a period of time, this depends on the temperature selected. The time varies between 2 hours for temperatures above 230°C, up 8 hours for those below 120°C.

Child Safety

To avoid children altering a selected programme or temeperature, the Child Safety facility can be operated. Press the "Child Safety" button and the "Oven On" button at the same time and keep them pressed for approximately 5 seconds.

The padlock symbol

will be displayed.

It is now only possible to select a function while simultaneously pressing the "Child safety" button.

To cancel the Child Safety Feature, press the "Oven On" button. Then press button the "Child Safety" button and the "Oven OFF" button at the same time and keep them pressed for approximately 5 seconds. The padlock symbol will disappear from the display.

Call for technical assistance

The programmer display carries out a self check, in order to verify that it is working correctly. If a problem is identified the spanner symbol will be displayed, and in the event of a breakdown a NUMBER will appear. If NUMBERS 001 or 002 appear it means that the meat probe is at fault and needs to be replaced. If a higher number appears, please contact your nearest Zanussi Service Force Centre quoting the number of Fault Code.

CHILD

SAFETY OFF ON

PROBE

TEMP.

COOK

TIME

STOP

TIME

MINUTE MINDER

NOTE:

Generally after about 8 seconds from pressing a function button the programmer will allow the selected function to operate. Should another button be pressed during the operation of a function, the display will show momentarily details of the function in progress. For the new command to be accepted it will be necessary to press the other button again.

Meat Probe

The meat probe is a feature which will control the cooking of meat by informing you of the exact temperature at the centre of the meat. It is not necessary to weigh the meat, the sensor determines the cooking time. The cooking time will be influenced by the cooking temperature.

The probe consists of a skewer like sensor at one end of a heat resistant cable, and a plug at the other end.

Only use the meat probe supplied with the oven or an original spare part.

1) First raise the meat probe socket cover (1),

☞

which is located in the top of the left hand side of the oven and plug the probe connecting pin into its socket (2).

2) Insert the probe sensor into the centre of the meat, taking care to avoid touching any bone or pockets of fat as this will give a false temperature reading.

3) Place the meat, in a suitable tin, into the oven cavity.

4) To select the Meat Probe function press the "Probe Temp." button. The display will show the pre-set temperature of 60°C and the C symbol will flash for about 8 seconds.

CHILD

SAFETY OFF ON

PROBE

TEMP.

COOK

TIME

STOP TIME

MINUTE

MINDER

5) Then select the finished internal meat temperature by pressing buttons the recommended temperatures in the roasting chart for meat probe function.

6) Select the required cooking function by pressing button 8.

Not all the cooking functions allow the use of

the probe (see next page). If you have selected an incorrect function, the probe symbol will flash red. For a correct function, the symbol will flash white.

7) The probe will then continue to register the internal meat temperature throughout the cooking period and convey the information to the programmer. The programmer will give a visual read-out as cooking continues, and switch off the oven when the selected temperature has been reached.

8) Press the "OFF" button to turn the oven off.

9) Open the oven door and remove the probe from the meat, then remove the probe from the socket.

As poultry is a difficult shape with a great deal

of bone it is difficult to register a correct finish temperature. Please ensure it is cooked thoroughly.

Do not submerge the meat probe in water, just wipe with a clean damp cloth.

+ or -. Check

Roasting Chart -Meat probe Function

Type of meat Internal Temperatures

Pork Well done 80°C Lamb Medium 70°C

Well done 80°C

Beef Rare 60°C

Medium 70°C Well done 80°C

Chicken Well done 82°C

The temperatures quoted above are given as a guide only.

Remove the meat probe after use. Do not leave the meat probe in the oven

when cooking other items.

If the oven has just been previously used

and the interior is hot, it may not be possible to use the meat probe. In that case, upon selection of the Meat Probe

function the symbol Remove the meat probe from the oven and

after a few minutes the Technical assistance symbol will disappear. You can either cook the meat without the probe or wait until the interior temperature of the oven has dropped down to 60°C.

will come on.

+ 21 hidden pages