Zamel ASM-02 User guide

STAIRCASE LIGHTING TIMER ASM-02 INSTRUCTION MANUAL

Zakład Mechaniki i Elektroniki

ZAMEL sp.j.

J.W. Dzida, K. Łodzińska

ul. Zielona 27, 43-200 Pszczyna, Poland

Tel. [phone], Fax [phone]

www.zamelcet.com, e-mail: [e-mail]

DESCRIPTION

The staircase lighting time delay
switch ASM-02 is used to control lighting
devices on staircases and corridors. After
releasing the system it switches on the
lighting for the preset time by the user.
After that it switches off automatically.
The operating time can be adjusted from
2 s to 10 min by means of the potentio­meter placed on the front panel of the
device. The device is equipped with an
anti-blocking function. The staircase li­ghting time delay switch ASM-02 can be
used as standard time delay relay.

FEATURES

● Staircase lighting control,

● operating time adjustment from 2 sec

to 10 min,

● power supply indicator – red LED,

● cooperation with monostable push-

buttons equipped with illumination

lamps,

● anti blocking function,

● cooperation with 4-wire installation,

● voltage relay output - one NO contact

max 16 A capacity,

● monomodular casing,

● TH 35 DIN rail installation.

TECHNICAL PARAMETERS

ASM-02

Input (supply) terminals: L, N

Input rated voltage: 230 V~

Input voltage tolerance: from -15 to +10 %

Nominal frequency: 50 / 60 Hz

Rated power consumption: 35 mA

Release terminals: IN, IN, IN

Release control current: 300 µA

Time adjustment range: from 2 sec to 10 min (rotational potentiometer)

Time accuracy adjustment: ±10 %

Time repeatability adjustment: ±5 %

Power/relay supply indicator: red LED

Output relay parameters: 1NO - 16 A / 250 V AC1 4000 VA

Number of terminal clamps: 8

Section of connecting cables: from 0,2 to 2,50 mm

Ambient temperature range: from -20 to +45

Operating position: free

Mounting: TH35 rail (PN-EN 60715)

Protection degree: IP20 (PN-EN 60529)

Protective class: II

Overvoltage category: II

Pollution degree: 2

Rated impulse withstand voltage: 1 kV (PN-EN 61000-4-5)

Dimensions (height / width / depth): monomodular (17,5 mm) 90x17,5x66 mm

Weight: 76 g

Reference standards: PN-EN 60669-1; PN-EN 60669-2-1

PN-EN 61000-4-2,3,4,5,6,11

2

o

C

The device is designed
for one-phase instal­lation and must be in­stalled in accordance

CAUTION

with standards valid
in a particular country.

The device should be
connected according to the details inc­luded in this operating manual. Installa­tion, connection and control should be
carried out by a qualied electrician staff,
who act in accordance with the service
manual and the device functions. Disas­sembling of the device is equal with a
loss of guarantee and can cause electric
shock. Before installation make sure the
connection cables are not under voltage.
The cruciform head screwdriver 3,5 mm
should be used to instal the device. Im­proper transport, storage, and use of the
device inuence its wrong functioning.
It is not advisable to instal the device in
the following cases: if any device part is
missing or the device is damaged or de­formed. In case of improper functioning
of the device contact the producer.

APPEARANCE

Input supply terminal (L)

Power/relay supply indicator

Time adjustment

Output (load) relay

terminals (11,11,14)

Input supply terminal (N)

Release terminals

(IN,IN,IN)

VER. 001_16.02.2009

MOUNTING, FUNCTIONING

CONNECTING

INNER DIAGRAM

1. Disconnect the power supply from the

mains by the phase fuse, the circuit­breaker or the switch-disconnector
that are joined to the proper circuit,

2. Check if there is no voltage on con-

nection cables by means of a spe­cial measure equipment,

3. Install ASM-02 device in the switch-

board on TH 35 DIN rail,

4. Connect the cables with the terminals

according to installing diagram,

5. Switch on the power supply from the

mains,

6. Adjust the demanded switch on time

by means of a potentiometer.

After proper mounting and installa­tion the device is ready to work. Rele­asing the system with the monostable
pushbutton causes the lighting to switch
on for the preset time. After the preset
time is over the lighting is automatically
switched off till its another release. The
staircase lighting time delay switch co­operates with 4-wire system. The stair­case lighting time delay switch ASM-02
has the anti blocking system. It means
the light is switched off after the adju­sted time in cases the pushbutton is
blocked.

DIMENSIONS

EXAMPLE OF INSTALLATION

NL

IN
IN
IN

t

TIME COURSE

t t

RELAY CAPACITY

2000 W

500 W

11
11

14

t

t

1000 W

750 W

PRODUCT FAMILY

The staircase lighting time delay switch
ASM-02 belongs to staircase lighting time
delay switches ASx family.

Version 24 V AC/DC

for ASM-02 available

Device version:

01 – three - or four-conductor

wiring
02 – anti-lock system
10 – dimmer function

Type of casing:

M – monomodular
N – surface mounting
H – hermetical
P – for junction box mounting

Device symbol

GUARANTEE CARD

There is 24 months guarantee on the product

Salesman stamp and signature, date of sale

Typical application:

The staircase lighting time delay switch ASM-02 operating the staircase ligh­ting works in 4-wire installation. Monostable pushbutton (equipped with illumination)
can be connected parallely.

1. ZAMEL provides a two-year warranty for its products.

2. The ZAMEL warranty does not cover:
a) mechanical defects resulting from transport, loading / unloading or other circumstances,
b) defects resulting from incorrect installation or operation of ZAMEL products,
c) defects resulting from any changes made by CUSTOMERS or third parties, to products sold or equipment necessary

for the correct operation of products sold,

d) defects resulting from force majeure or other aleatory events for which ZAMEL is not liable.

3. All complaints in relation to the warranty must be provided by the CUSTOMER in writing to the retailer after discovering
a defect.

4. ZAMEL will review complaints in accordance with existing regulations.

5. The way a complaint is settled, e.g. replacement of the product, repair or refund, is left to the discretion of ZAMEL.

VER. 001_16.02.2009