ZALMAN ZM80D-HP User Manual

Loading...

Product manual is provided in the following languages :

English

Korean

To better understand the installation process, check out the flash movie at our website (www.zalman.co.kr).

Please read this manual thoroughly before installation.

The specifications of this product and its components may change without prior notice.

Limited warranty : Parts and labor - 3 years (please see website for details)

www.zalman.co.kr www.zalmanusa.com

1

ZM80D-HP

Cautions&Warnings

On Use

installation.

an Optional Fan (ZM-OP1). You can expect satisfactory cooling performance with more cooling, you can attach the Optional Fan (ZM-OP1).

an ATI Radeon 9800 Pro, a Matrox Parhelia, or a more advanced model, an Optional installed.

(Video Graphics Card), the PCI slot adjacent to the AGP slot will be unusable. released VGA card, check for compatibility at Zalman’s website (www.zalman.co.kr)

by a sharp object, it may not function properly. Please handle with care. overclocking. Zalman is not responsible for any damage from VGA card overclocking.

or exerting excessive force on the heatsinks on each side of the card, for it may

the use of a fan on the rear panel of the system’s case is recommended.

.

For installation

installed if the Northbridge Cooler is shorter than base, or if taller be at least 5.5 mm away from

series Cooler is used, the CPU Retention Guide away from the AGP slot to install this product. card equipped with this product into a computer PCI slot cover under the AGP slot can lower

temperature by as much as 4~5 .

350g, always firmly fasten the VGA card onto Special care should be taken while the computer is not responsible for any damage arising while

VGA card interfere in any way with this product, product. In such case, stop the installation and

for any problems arising from incorrect

AGP Slot

(VGA Card)

open

PCI Slot Cover

Fixing Bolt

www.zalman.co.kr www.zalmanusa.com

2

TableofContents

1. Features

3

2. Specifications

3

3. Compatible VGA Cards

3

4. Components

4

5. Exploded View

5

6. Installation

6

7. ZM80DHP Optional Fan Installation

15

8. Zalman Noise Prevention System

16

1.Features

1)This product was designed to optimize heat dissipation for excellent cooling performance.

2)Dual heatpipes increase heat transfer speed and enhance the cooling efficiency.

3)The fanless design ensures complete noiselessness and maintenance-free operation.

4)RAM heatsinks for cooling the VGA RAM.

5)Compatibility with virtually all types of VGA cards allows reinstallation when upgrading the VGA card. (Incompatible with VGA cards that do not have original heatsink holes measuring 3mm in diameter, or VGA cards on which the ZM80D-HP interferes with the card’s components.)

6)An Optional Fan (ZM-OP1, sold separately) can be attached to the heatsink directly without using a separate bracket.

2.Specifications

1) Weight : 350 g

2) Heatpipe : Gold plated copper tube

3) Dissipation material : Anodized Aluminum

4) Heat Dissipation Surface Area : 1350

5) VGA RAM Heatsink material : Anodized Aluminum

6) VGA RAM Heatsink weight :

Frontside : 2.9 g(EA) Backside : 1.2 g (EA)

3.CompatibleVGACards

Compatible with all VGA cards with original Heatsink Mounting Holes.

VGA Chipset

(O)

Heatsink Mounting

 

Hole (3 mm)

 

 

www.zalman.co.kr www.zalmanusa.com

3

ZM80D-HP

4.Components

Heatsink 1EA

Heatpipe Cover 1EA

Frontside Heatsink Base 1 Set

 

 

A Type

B Type

A 1EA

Heatpipe B 1EA

Backside Heatsink Base 1 Set

A Type

B Type

Plate Link Nipple

4 EA

Washer

4 EA

Bolt A (10 mm)

4 EA

Bolt B(8 mm)

6 EA

Nut A

2 EA

Rubber Ring

2 EA

Nipple

2 EA

Plate Link

2 EA

Thermal Grease

2 EA

OptionalComponents

Fan Bolt (26 mm)

2 EA

Washer

2 EA

Bolt A (10 mm)

2 EA

Bolt B (8 mm)

2 EA

Bolt C

2 EA

Nut A

1 EA

Rubber Ring

2 EA

Nut B

2 EA

Nipple

1 EA

Thermal Grease

1 EA

Thermal Tape

2 EA

Frontside

Backside

Fan Grill Assembly

Multi Connector 1

www.zalman.co.kr www.zalmanusa.com

4

5.ExplodedView

Bolt B (8 mm)

Logo

Frontside Heatsink

Bolt A

Frontside

RAM Heatsink

Rubber Ring

Nipple

Nut A

Backside

Heatsink Base

Plate Link Nipple

Plate Link

Washer

Bolt A (10 mm)

Frontside Heatsink Base

Heatpipe A

Heatpipe B

Backside RAM Heatsink

Plate Spring

Heatpipe Cover

Bolt B (8 mm)

Sticker

Backside Heatsink

Bolt B (8 mm)

www.zalman.co.kr www.zalmanusa.com

5

+ 11 hidden pages