York Fitness 52056 Owner's Manual

Owner’s Manual

Aspire Cross Trainer

52056

V1.0 10OCT2012

www.yorkfitness.com

www.yorkfitness.com

2

Table of contents

Congratulations on
purchasing your exercise
equipment from

You have chosen a high quality, safe and innovative
piece of equipment as your training partner and we
are certain it will keep you motivated on the way to

achieving your personal tness goals.

Please take the time to read this owner’s manual as it
will help you to get the most out of your new exercise
equipment.

For more information visit www.yorktness.com

Contents

Safety information 03

Customer support 04

Care & Maintenance 05

Assembly instructions 05

Operational instructions 12

Troubleshooting 15

Fitness guide 16

Exploded drawing 18

Part list 20

Protect the environment by not
disposing of this product or batteries
with household waste. Check your
local authority for recycling advice and
facilities.

www.yorkfitness.comwww.yorkfitness.com

3

Safety information

Please read this instruction manual before you begin
assembly. Great care has been taken to design these
instructions and following them will help you with
quicker assembly and minimize the risk of injury.

It is important that you keep these instructions for
future reference.

This list is not exhaustive - You are responsible for your
own safety!

• Always assemble and operate the equipment on a
level surface.

• Ensure the equipment is stable before use.

• Always ensure that the equipment has adequate

space on each side.

• Ensure that the seat height is adjusted correctly.
You should be stable and balanced while on the
saddle.

• Adjust the seat height to ensure that you
have a good downward pedal stroke without
overstretching, don’t compromise your balance.

• Try to ensure that your back is straight while
exercising, especially for long periods.

• The safety level of this equipment can only be
maintained if it is regularly examined for wear and
tear.

• Replace defective components immediately and
keep the equipment out of use until it is repaired.

• Use only the adjustment setting as described in the
instructions. Always use the correct adjustment pin

/ xing.

• Always check that any pins / xings are tight and

secure before use and after adjustment.

• Never leave any adjustment devices projecting from
the equipment.

• Always consult your doctor before undertaking any
exercise program.

• Always wear suitable clothing and footwear. (e.g.
tracksuit / shorts / training shoes)

• Remove all personal jewelry before exercising.

• Ensure you warm-up well before using the

equipment as this will help to prevent muscle strain.

• After eating, allow 1-2 hours before exercising as
this will help to prevent muscle strain.

• Never overload the equipment. (See maximum user
weight)

• Never use the equipment in any other manner other
than the ways explained in these instructions and
any wall-chart supplied.

• Injuries to health may result from incorrect or
excessive training.

• Parents and others in charge of children should be
aware of their responsibility, because the natural
play instinct and the fondness of experimenting
of children can lead to situations and behavior for
which the training equipment is not intended.

• If children are allowed to use the equipment, their
mental and physical development and above all
their temperament should be taken into account.
They should be controlled and instructed in the
correct use of the equipment.

• The equipment is under no circumstances suitable
as a children’s toy.

• Children should not be allowed on or around the
equipment, especially when it is not in use.

• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.

• This product is not suitable for therapeutic
purposes.

• This product has an integrated speed independent
braking system without a constant power mode that
is governed by magnetic resistance.

• This product has been tested for use in a home
environment and is warranted for In Home,
personal, family or household use.

• Due to our continuous policy of product
development, York Fitness reserves the right to

change specications without notice.

CAUTION! The instructions must be followed carefully
in the assembly, use and maintenance of your
equipment. The warranty does not cover damage
due to negligence of the assembly, adjustment and
maintenance instructions described herein.

Maximum user weight: 130kg

Safety Standards

This equipment meets the requirements of the EU’s
EMC and Low Voltage directives (where applicable),
EN957 1 & 9 - CLASS HB. Therefore the equipment
carries the following marks:

www.yorkfitness.com

4

Customer support

Should you require any assistance regarding this product please
gather the following information and then contact us using the
details below:

• Serial No. - This can be found on the sticker below, located as indicated.

• Original purchase date

• Place of purchase

• Information about the place and conditions of use

• Precise description of the issue / defect

Use only on a level surface
Not suitable for therapeutic purpose

Manufacturer: YORK BARBELL
Contact: www.yorktness.com
Product Name: YORK ASPIRE CROSS TRAINER
Max User Weight: 130KG
Safety Standards: EN957 Part 1 & 9 - Class HB
Electrical info: Adaptor 9V, 500mA

SERIAL NO:

52056-XXXXXXXXX

Product’s Name

Serial Number

This product label is an example only, it is not the
real product name and serial number of the item
you have bought.

IMPORTANT!! - Please retain your sales receipt, York Fitness Customer Care may request proof of purchase to
validate eligibility for warranty service. Warranty cover starts from the date shown on the proof of purchase.

ENGLAND

The best way to contact us is via the website:

www.yorktness.com

York Barbell UK Ltd.

York Way, Daventry, England, NN11 4YB

Tel: [phone]

AUSTRALIA

The best way to contact us is via the website:

www.yorktness.com.au

York Fitness Australia

1/2 Swaham Rd, Minto, PO Box 5130, NSW 2566

Tel: [phone]

www.yorkfitness.comwww.yorkfitness.com

5

Care & Maintenance

• This equipment should not be placed outdoors, in a garage or an outbuilding. Keep the equipment in a dry
place with as little temperature variation as possible.

• We recommend placing a mat beneath the equipment to protect both the equipment and your ooring.

• Always place the equipment in a dry environment.

• Use a warm, damp cloth to keep the product clean.

• No wet cleaning of electrical components. Unplug before any care and maintenance.

• The safety level of the equipment can be maintained only if it is regularly examined for damage and wear. This

includes any ropes, pulleys, nuts, bolts, moving parts, bushes, chains, wheels, bearings & connection points etc.

• Ensure that you inspect the product regularly - at least once a week is recommended.

• Ensure that all xings are tight before use.

• Always replace damaged / worn components with original parts from the manufacturer.

PREPARE YOUR WORK AREA - It is important you assemble the product in a clean and uncluttered space.

WORK WITH A FRIEND - We recommend you have someone assist you with the assembly as some of the

components are quite heavy.

OPEN THE CARTON - Check any warnings on the carton and make sure you have it the right way up.

UNPACK THE CARTON - Remove all the parts and lay them out on the oor.

Make sure you have the following parts:

A (1 pc)

Z (1 pc)

E (1 set)

F (1 pc)

G (1 pc)

S (1 pc)

C (1 pc)

O (1 pc)

B (1 pc)

R (1 pc)

H (1 set)

N (1 set)

www.yorkfitness.com

6

Assembly instructions

Make sure you have the following parts:

N-1 (4pcs)

M8*1.25*75L

N-2 (4pcs)

M8*1.25*15L

N-10 (2pcs)

D26*D19.5*0.3T

N-5 (4pcs)

M8 x 1.25 x 20L

N-4 (4pcs)

D22 x D8.5 x 1.5T

N-5 (2pcs)

M8 x 1.25 x 20L

N-4 (2pcs)

D22 x D8.5 x 1.5T

N-3 (2pcs)

D15.4 x D8.2 x 2T

N-13 (2pcs)

D25 x D8.5 x 2T

N-3 (6pcs)

D15.4 x D8.2 x 2T

N-12 (2pcs)

M8*1.25*25L

N-11 (2pcs)

D29*21 (M8)

N-3 (4pcs)

D15.4*D8.2*2T

N-9 (4pcs)

M6 x 1 x 45L

N-7 (4pcs)

D40 x M6 x 12

N-14 (2pcs)

D28*17 (M10)

N-15 (2pcs)

D30*17 (M12)

N-6 (2pcs)

D14*D8*4T

N-5 (6pcs)

M8 x 1.25 x 20L

N-4 (4pcs)

D22 x D8.5 x 1.5T

N-17 (1pc)

N-16 (2pcs)

N-8 (4pcs)

D14 x D6.5 x 0.8T

N-4 (4pcs)

D22*D8.5*1.5T

Step 1 Step 5

Step 3

Step 4

N-3 (6pcs)

D15.4 x D8.2 x 2T

www.yorkfitness.comwww.yorkfitness.com

7

STEP 1

N-1 (4pcs)

N-4 (4pcs)

N-3 (4pcs)

N-2 (4pcs)

N-2

Z

F

N-3

N-4

N-1

G

STEP 2

Z

C

C-3

D-7

www.yorkfitness.com

8

Assembly instructions

STEP 3

N-5 (4pcs)

N-4 (4pcs)

N-12 (2pcs)

N-3 (6pcs)

N-13 (2pcs)

N-10 (2pcs)

E

C Q

N-5

N-4

N-3

N-3

S

N-10

N-10

N-11

N-12

N-13

STEP 4

N-5 (2pcs)

N-3 (2pcs)

N-4 (2pcs)

B

N-4

N-3

N-5

O

www.yorkfitness.comwww.yorkfitness.com

9

STEP 5

N-15 (2pcs)

N-14 (2pcs)

N-9 (4pcs)

N-8 (4pcs)

N-5 (6pcs)

N-3 (6pcs)

N-4 (4pcs)

N-6 (2pcs)

N-7 (4pcs)

N-14

N-15

P

N-8

H

H

A

B

P

N-4

N-3

N-5

N-9

N-6

N-7

www.yorkfitness.com

10

Assembly instructions

STEP 6

A-2 (4pcs)

A

R

A-1

A-2

B-4

C-3

B-4

C-3

www.yorkfitness.comwww.yorkfitness.com

11

Final Check

Your exercise equipment is now assembled.

Please make the following nal checks:

• Make sure all screws / bolts are tightened.

• Make sure the equipment is on a at, level surface.

Adjusting The Resistance

This exercise equipment features a speed independent braking (resistance) system. The resistance is controlled by a

magnet, which is moved closer or further away from the ywheel - the closer the magnet is to the ywheel the higher

the resistance. The magnet is computer controlled, to adjust simply use the UP / DOWN buttons on the console.

Hand Pulse Sensors

This exercise equipment is tted with 2 hand pulse sensors.

To obtain a pulse reading you must have both your left and
right hands on the sensors at the same time. Do not grip
the hand sensors too tight and allow the computer a few
seconds to display the reading.

Hand Pulse Sensor

Levelling Your Cross Trainer

To help you level the cross trainer on uneven surface, 2
height adjusters are included on the rear stabilizers. Simply
twist these around to adjust the height of the cross trainer.

RECOVE RY

RESET

MODE

START

STOP

www.yorkfitness.com

12

Operational instructions

Console:

DISPLAY DESCRIPTION

Up • Increase resistance level

• Setting selection.

Down • Decrease resistance level

• Setting selection.

Mode • Conrm setting or selection.

Reset • Press and hold for 2 seconds,

computer will reboot and start
from user setting.

• Go back to main menu during
presetting workout value or stop
mode.

Start/ Stop • Start or Stop workout.

Recovery • Test heart rate recovery status.

Display Functions:

DISPLAY DESCRIPTION

TIME • Workout time displayed during exercise.

• Range 0:00 ~ 99:59

SPEED • Workout speed displayed during exercise.

• Range 0.0 ~ 99.9

DISTANCE • Workout distance displayed during exercise.

• Range 0.0 ~ 99.9

CALORIES • Burned calories during workout display.

• Range 0 ~ 999

PULSE • Pulse bpm displayed during exercise.

• Pulse alarm when over preset target pulse.

RPM • Rotation per minute

• Range 0 ~ 999

WAT T • Workout power consumption

• In Watt Program mode, computer will remain preset watt value (setting range 0~350)

MANUAL • Manual mode workout.

PROGRAM • 12 PROGRAM selection.

USER • User creates resistance level prole.

H.R.C. • Target HR training mode.

www.yorkfitness.comwww.yorkfitness.com

13

Power On

Plug in power supply, computer will power on and display all segments on LCD for 2 seconds. After 4 minutes
without pedaling or pulse input, console will enter into power saving mode.

Press any key may wake the console up.

Manual Mode

Press START in main menu to start workout in manual mode.

1. Press UP or DOWN to select workout program, choose Manual and press Mode to enter.

2. Press UP or DOWN to preset TIME, DISTANCE, CALORIES, PULSE and press MODE to conrm.

3. Press START/STOP keys to start workout. Press UP or DOWN to adjust load level.

4. Press START/STOP keys to pause workout. Press RESET to reverse to main menu.

Program Mode

1. Press UP or DOWN to select workout program, choose the Program and press Mode to enter. (Total Program = 12)

2. Press UP or DOWN to preset TIME.

3. Press START/STOP key to start workout. Press UP or DOWN to adjust load level.

4. Press START/STOP key to pause workout. Press RESET to reverse to main menu.

User Program Mode

1. Press UP or DOWN to select workout program, choose User and press Mode to enter.

2. Press UP or DOWN to set load level of each column, and press MODE to next one. (Total column = 20)

3. Hold on pressing MODE to nish or quit setting.

4. Press UP or DOWN to preset workout TIME.

5. Press START/STOP key to start workout. (Press UP or DOWN to adjust load level.)

6. Press START/STOP key to pause workout. (Press RESET to reverse to main menu.)

H.R.C. Mode

1. Press UP or DOWN to select workout program, choose H.R.C. and press Mode to enter.

2. Press UP or DOWN to set up age (default: 25) (setting range: 1~99)

3. Press UP or Down to select 55%.75%.90% or TAG (TARGET H.R.) (default: 100).

4. Press UP or DOWN to preset workout TIME.

5. Press START/STOP key to start or stop workout. Press RESET to go back to main menu.

www.yorkfitness.com

14

Operational instructions

WATT Mode

1. Press UP or DOWN to select workout program, choose WATT and press Mode to enter.

2. Press UP or DOWN to preset WATT target. (default: 120)

3. Press UP or DOWN to preset TIME.

4. Press START/STOP key to start workout. (Press UP or DOWN to adjust Watt level.)

5. Press START/STOP key to pause workout. (Press RESET to reverse to main menu.)

Recovery

1. The user must be holding the handgrips. When the pulse value is displayed on the computer, press on the
RECOVERY key.

2. TIME shows “0:60” (seconds) and count down.

Computer will show F1 to F6 after count down to 0 to test heart rate recovery status.

1.0 OUTSTANDING

1.0 < 1.9 EXCELLENT

2.0 < 2.9 GOOD

3.0 < 3.9 FAIR

4.0 < 5.9 BELOW AVERAGE

6.0 POOR

www.yorkfitness.comwww.yorkfitness.com

15

Troubleshooting

If you have a problem with your equipment, before you do anything else please check that all the cables have been
connected correctly. Loose cables are very common and many problems can be solved by making sure the cables
are properly connected.

The following table details the most common problems and how to x them. If you still have a problem after going

through the troubleshooting guide please call your local YORK distributor for advice.

PROBLEM CORRECTION

NO DISPLAY Check if batteries are inserted correctly, check batteries.

NO PULSE SIGNAL Verify all wires are connected properly

DISPLAY: E-2 Check if cables are well connected or damaged.

FOR YOUR OWN SAFETY, DO NOT OPEN PROTECTIVE CASING. IF ERROR PERSISTS, PLEASE CONTACT
YOUR LOCAL YORK DISTRIBUTOR FOR ADVICE. KEEP THE EQUIPMENT OUT OF USE UNTIL IT IS REPAIRED.

If you are having problems with your heart rate reading, please note that some bres used in clothes eg) polyester,

create static electricity that may prevent a reliable heart rate reading. Mobile phones, TV’s, microwaves and other

electrical appliances that generate an electromagnetic eld may also interfere with heart rate measurement.

www.yorkfitness.com

16

Starting and Finishing Your Workout

Begin and end each workout with a Warm Up / Down session - a few minutes of stretching to help prevent strains,
pulls and cramps.

Correct Cross-training Form

To start using the cross trainer, simply stand on the foot pedals with the front of your shoes close to the front edge
of the pedal cap. Place your hands at a comfortable position on the handlebars. Simply move your highest foot
forward and follow the natural path of the machine.

Start on a load level that is comfortable to familiarize yourself with the machine. Once you are comfortable, start
adjusting the load level to achieve the workout desired.

Forward and Reverse: The cross trainer can be used in the forward and reverse direction to vary the muscles that
you workout. This will also vary your workout helping you to stay motivated. To change directions, simply slow the
pedals down until they stop and switch directions.

Load Level Adjustment: The load level of cross trainer can be changed at any time during your workout.
Adjusting your load level will allow you to increase or decrease your intensity level.

Suggested Stretches

The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce.

1. Hamstring Stretch

Sit with one leg
extended. Bring the
sole of the opposite
foot toward you and
rest it against the inner
thigh of your extended
leg. Reach toward your
toes as far as possible.
Hold for 15 counts, then
relax. Repeat 3 times
for each leg. Stretches:
Hamstrings, lower back
and groin.

2. Calf/Achilles Stretch

With one leg in front of
the other, reach forward
and place your hands
against a wall. Keep your
back leg straight and

your back foot at on the
oor. Bend your front leg,

lean forward and move
your hips toward the
wall. Hold for 15 counts,
then relax. Repeat 3
times for each leg. To
cause further stretching
of the achilles tendons,
bend your back leg as
well. Stretches: Calves,
achilles tendons and
ankles.

3. Quadriceps Stretch

With one hand against
a wall for balance,
reach back and grasp
one foot with your
other hand. Bring your
heel as close to your
buttocks as possible.
Hold for 15 counts, then
relax. Repeat 3 times
for each leg. Stretches:
Quadriceps and hip
muscles.

4. Inner Thigh Stretch

Sit with the soles of your
feet together and your
knees outward. Pull your
feet toward your groin
area as far as possible.
Hold for 15 counts, then
relax. Repeat 3 times.
Stretches: Quadriceps
and hip muscles.

Fitness guide

www.yorkfitness.comwww.yorkfitness.com

17

How Long Should I Exercise For?

That really depends on your current level of tness. If you’re just starting out on a new exercise program, you should

start gradually and build up - do not try to do too much too quickly. 30 minutes, 3 times a week should be enough.

Don’t push yourself too hard - you should never feel exhausted during or following exercise.

Heart Rate Training

To get the most out of your new piece of tness equipment and see the best results from your training you should
exercise at the right level of eort, and that means listening to your heart! Working out to a target heart rate means
you can direct your workout to achieve dierent goals:

Good health - For those wishing to improve quality of life and general well being. Your sessions will need to be
done at an intensity of between 50 - 60% of your estimated maximum heart rate, should last about 30 minutes and
can be done on most days of the week.

Weight loss - To see a signicant reduction in body fat, your sessions must be a little more intense - between 60

and 70% of your estimated maximum heart rate. These sessions can also be performed on most days of the week
for up to 30 minutes.

Improving tness levels - These sessions should be performed at 70 - 80% of your estimated maximum heart rate

and can also involve bouts of interval training that would have your heart rate peaking for short times near your
maximum heart rate level. These are intense sessions and will require at least a 48 hour rest between sessions.

Calculating Your Target Heart Rate

First, you need to nd your estimated maximum heart rate using the formula “220 minus your age in years”. So, if

you are 35 years old your estimated maximum heart rate is:

220 - 35 = 185 beats per minute (bpm)

Next, to calculate your target heart rate, simply multiply your estimated maximum heart rate (185bpm) by the
applicable percentage. So, if your goal is better health:

185 x 60% = 111bpm

NOTE: The important issue to remember with all estimated calculations is that they are just estimates - if you don’t
feel comfortable exercising at your target then reduce it to a level you are comfortable with.

Heart rate training requires you to monitor your heart rate throughout the workout. For this we recommend using
a chest strap (if your machine has a wireless receiver) or a heart rate monitor. For more information please get in
touch using the Contact Us details.

Always consult your doctor before undertaking a new exercise regime. If you experience nausea, dizziness or other
abnormal symptoms during exercise, stop at once and consult your doctor.

www.yorkfitness.com

18

A-1

A-2

B

E

N-11

N-12

N-3

N-13

N-10

N-4

N-3

N-5

O

N-5

N-3

N-4

N-3C

Z

N-2

N-3

N-14

N-15

HN-9

P

F

N-7

N-8

N-4

N-1

G

N-6

N-5

N-4

Exploded drawing

www.yorkfitness.comwww.yorkfitness.com

19

E

B

F M

Q O R

P

G

S

I

J

H

T K L

C A D

E-2

E-1

B-5

B-6

B-3

B-2

B-4

T-6

M-5

M-7

M-8

M-9

Q-2

Q-3

I-1

I-4

I-5

I-2

I-3

Q-5

Q-4

Q-1

M-4 M-3 M-2 M-1 M-6

T-7 T-1

T-2 T-3 T-4 T-5

K-5

L-9

L-7

L-8

L-6

L-5

P-10

P-9

P-8

P-7

P-5 P-4 P-3

P-2

P-1

P-6

L-4

L-3

L-1

L-2

K-4

K-3

K-2

K-1

K-8

K-9

K-11

K-10

L-10

L-11

B-1

F-2

G-2

H-2

J-2

J-1

J-3

J-4

J-5 J-6

H-1

G-1

F-1

F-4

F-3

C-3

A-1

D-2

D-1

D-4 D-3

D-7 D-5 D-6 D-8

D-10

D-9

A-2

C-2

C-1

E-3

E-4

www.yorkfitness.com

20

Part list

YORK REF. REF. DESCRIPTION QTY.

52056A00 A COMPUTER SET 1

52056A01 A-1 COMPUTER (SM-2761-67) 1

52056A02 A-2 BOLT (M5*0.8*10L ) 4

52056B00 B FIXING BAR SET 1

52056B01 B-1 FIXED HANDLEBAR 1

52056B02 B-2 FOAM (D23X4TX480L) 2

52056B03 B-3 HALF BALL CAP 2

52056B04 B-4 HANDLE PULSE CABLE (600L) 2

52056B05 B-5 HANDLE PULSE SENSOR 2

52056B06 B-6 SCREW (ST4X1.41X20L) 2

52056C00 C HANDLEBAR POST SET 1

52056C01 C-1 HANDLEBAR POST 1

52056C02 C-2 BUSHING - D19.15X(D25.6X32)XL(17+3) 2

52056C03 C-3 UPPER COMPUTER CABLE (900L) 1

52056D00 D MAIN FRAME SET 1

52056D01 D-1 MAIN FRAME 1

52056D02 D-2 INNER TUBE 1

52056D03 D-3 MOTOR 1

52056D04 D-4 SCREW (ST4.2*1.4*15L) 2

52056D05 D-5 SENSOR CABLE (100L) 1

52056D06 D-6 BOLT (M5*0.8*10L) 1

52056D07 D-7 LOWER COMPUTER CABLE (1000L) 1

52056D08 D-8 TENSION CABLE (D1.2*230L) 1

52056D09 D-9 BEARING (#6003ZZ) 2

52056D10 D-10 ELECTRIC CABLE (150L) 1

52056E00 E HANDLEBAR SET 1

52056E01 E-1 RIGHT HANDLE BAR 1

52056E02 E-2 LEFT HANDLE BAR 1

52056E03 E-3 MUSHROOM CAP (D1 1/4"*45 L) 2

52056E04 E-4 FOAM (D30*4T*440L) 2

52056F00 F FRONT STABILIZER SET 1

52056F01 F-1 FRONT STABILIZER 1

52056F02 F-2 ROUND FOOT CAP 2

52056F03 F-3 FOOT CAP 2

52056F04 F-4 SCREW (ST4*1.41*12L) 4

52056G00 G REAR STABILIZER SET 1

52056G01 G-1 REAR STABILIZER 1

52056G02 G-2 FOOT CAP(12 ANGLE) - D60XD75X50L 2

52056H00 H PEDAL SET 1SET

52056H01 H-1 LEFT PEDAL 1

52056H02 H-2 RIGHT PEDAL 1

52056I00 I CRANK SET 1

52056I01 I-1 CRANK 2

52056I02 I-2 ANTI-LOOSEN NUT (M10*1.25*7T) 2

52056I03 I-3 SIDE CAP 2

52056I04 I-4 ROUND COVER 2

52056I05 I-5 FLAT WASHER (D90XD10X3T*7.5) 2

52056J00 J CHAIN COVER SET 1

52056J01 J-1 UPPER DECORATIVE COVER 1

52056J02 J-2 ROUND RING FOR CHAIN COVER 1

52056J03 J-3 LEFT CHAIN COVER 1

52056J04 J-4 RIGHT CHAIN COVER 1

52056J05 J-5 SCREW (ST4.2X1.4X20L) 9

YORK REF. REF. DESCRIPTION QTY.

52056J06 J-6 SCREW (ST4.2*20L) 2

52056K00 K FIXING PLATE FOR MAGNET SET 1

52056K01 K-1 FIXING PLATE FOR MAGNET 1

52056K02 K-2 SPRING (D1.0*55L) 1

52056K03 K-3 NYLON NUT (M6*1*6T) 1

52056K04 K-4 FLAT WASHER (D13*D6.5*1.0T) 1

52056K05 K-5 NYLON WASHER (D6*D19*1.5T) 1

52056K06 K-6 NUT (M6*1*6T) 1

52056K07 K-7 BOLT (M6*65L) 1

52056K08 K-8 NYLON NUT (M8*1.25*8T) 1

52056K09 K-9 BOLT (M8*52L) 1

52056K10 K-10 MAGNET 8

52056K11 K-11 PLATE FOR MAGNET 7

52056L00 L FIXING PLATE FOR IDLE WHEEL SET 1

52056L01 L-1 FIXING PLATE FOR IDLE WHEEL 1

52056L02 L-2 SPRING (D3*D17*59L) 1

52056L03 L-3 FLAT WASHER (D50*D10*3.0T) 1

52056L04 L-4 PLASTIC FLAT WASHER (D10*D24*0.4T) 1

52056L05 L-5 BOLT (M8*1.25*30L) 1

52056L06 L-6 FLAT WASHER (D30*D8.2*3.0T) 1

52056L07 L-7 FIXING RING 1

52056L08 L-8 IDLE WHEEL 1

52056L09 L-9 C-CLIP - S-10(1T) 1

52056L10 L-10 NUT (M8*1.25*6T) 1

52056L11 L-11 NYLON NUT (M8*1.25*8T) 1

52056M00 M BELT WHEEL SET 1

52056M01 M-1 WAVED WASHER (D17*D22*0.3T) 2

52056M02 M-2 FLAT WASHER (D23*D17.2*1.5T) 1

52056M03 M-3 C-CLIP - S-17(1T) 2

52056M04 M-4 BELT (1118L PJ5) 1

52056M05 M-5 BELT WHEEL (D280*19) 1

52056M06 M-6 CRANK AXLE 1

52056M07 M-7 ROUND MAGNET 1

52056M08 M-8 BOLT (M6*1.0*15L) 4

52056M09 M-9 NYLON NUT (M6X1.0X6T) 4

52056N01 N-1 SQUARE NECK BOLT (M8X1.25X75L) 4

52056N02 N-2 DOMED NUT (M8X1.25X15L) 4

52056N03 N-3 SPRING WASHER (D15.4XD8.2X2T) 18

52056N04 N-4 CURVED WASHER (D22XD8.5X1.5T) 14

52056N05 N-5 ALLEN BOLT (M8X1.25X20L) 12

52056N06 N-6 CONED WASHER (D14*D8*4) 2

52056N07 N-7 CLUB KNOB 4

52056N08 N-8 FLAT WASHER (D14XD6.5X0.8T) 4

52056N09 N-9 SQUARE NECK BOLT (M6*1*45L) 4

52056N10 N-10 WAVED WASHER (D26*D19.5*0.3T) 2

52056N11 N-11 SCREW COVER - D29*21(M8) 2

52056N12 N-12 BOLT (M8X1.25X25) 2

52056N13 N-13 FLAT WASHER (D25XD8.5X2T) 2

52056N14 N-14 SCREW COVER - D28*17(M10) 2

52056N15 N-15 SCREW COVER - D30*17(M12) 2

52056O00 O PROTECTIVE COVER 1

52056P00 P PEDAL SUPPORT SET 1

52056P01 P-1 PEDAL SUPPORTING TUBE 2

www.yorkfitness.comwww.yorkfitness.com

21

YORK REF. REF. DESCRIPTION QTY.

52056P02 P-2 SQUARE CAP (30*60*15) 4

52056P03 P-3 NYLON NUT (M10*1.5*10T) 2

52056P04 P-4 FLAT WASHER (D20*D11*2.0T) 2

52056P05 P-5 BUSHING - D19.15X(D25.6X32)XL(17+3) 4

52056P06 P-6 BUSHING (D29*D11.9*9T) 4

52056P07 P-7 C-CLIP (D21.5XD17.5X1.2T) 4

52056P08 P-8 JOINT 2

52056P09 P-9 FLAT WASHER (D24*D13.5*2.5T) 2

52056P10 P-10 LADDER BOLT (M10*1.5*58L) 2

52056Q00 Q MOVEABLE SUPPORTING TUBE SET 1

52056Q01 Q-1 MOVEABLE SUPPORTING TUBE 2

52056Q02 Q-2 BUSHING - D19.15X(D25.6X32)XL(17+3) 8

52056Q03 Q-3 FRONT PEDAL AXLE 2

52056Q04 Q-4 C-CLIP (D21.5XD17.5X1.2T) 4

52056Q05 Q-5 WAVED WASHER (D26*D19.5*0.3T) 2

52056R00 R ADAPTOR 1

52056S00 S AXLE - D19X374.5(M8X1.25) 1

52056T00 T FLY WHEEL SET 1

52056T01 T- 1 FLY WHEEL 1

52056T02 T- 2 FLY WHEEL AXLE 1

52056T03 T- 3 FIXING RING (D13*D10*1.9T) 1

52056T04 T- 4 NUT - D9.5X4T(3/8"-26UNFX3T) 1

52056T05 T- 5 ANTI-LOOSEN NUT (3/8"-26UNF*6.5T) 2

52056T06 T- 6 NUT - D9.5X5T(3/8"-26UNFX5T) 2

52056T07 T- 7 BEARING - (#6000ZZ) 2

www.yorkfitness.com

22

Notes

www.yorkfitness.comwww.yorkfitness.com

23

www.yorkfitness.com