York YHJD18 thru 60 User Manual
TECHNICAL GUIDE
LX SERIES
SPLIT-SYSTEM HEAT PUMPS
13 SEER – R-410A – 1 PHASE
1.5 THRU 5 NOMINAL TONS
MODELS: YHJD18 THRU 60
Due to continuous product improvement, specif ic a tio ns
are subject to change without notice.
Visit us on the web at
www.upgnet.com and www.york.com
Additional rating information can be found at
www.ahridirectory.org
WARRANTY SUMMARY*
Standard 5-Years limited parts warranty.
Standard 10-Years limited compressor warranty.
Extended 10-Years limited parts warranty when product is
registered online within 90 days of purchase for replacement
or closing for new home construction.
*Does not apply to R-22 models, 3-Phase models, or internet sales.
See Limited Warranty certificate in User' s I nformation Manual for details.
®
571209-YTG-C-1012
DESCRIPTION
The 13 SEER Series unit is the outdoor part of a versatile climate system. It i76s designed with a matching indoor coil component from Johnson Controls Unitary Products. Available for
typical applications this climate system is supported with accessories and documents to serve specific functions.
FEATURES
• Small Footprint - The compact footprint is a perfect fit for
any application.
• Quality Condenser Coils - The coil is constructed of copper
tubing and enhanced aluminum fins for increased performance.
• Coil Protection - Coils are protected from damage by a slotted, stamped steel coil guard.
• Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high pressure switch. A
factory installed liquid line filter-drier further protects the compressor against moisture and debris.
• Environmentally Friendly Refrigerant - The next genera-
tion refrigerant R-410A delivers environmentally friendly performance with zero ozone depletion.
• Durable Finish - The cabinet is made of G90-equivalent prepainted steel, with special primer formulas and matte champagne texture to insure less fading when exposed to sunlight. The coated steel wire fan guard and pre-treated,
galvanized steel chassis components resist corrosion and
rust creep.
• Lower Installed Cost - Installation time and costs are
reduced by easy power and control wiring connections. The
unit is factory charged for a 15-foot lineset. The small base
dimension means less space is required on the ground or
roof.
• Top Discharge - Warm air from the top mounted fan is blown
up, away from the structure and any landscaping. This allows
compact location on multi-unit applications.
• Low Operating Sound Level - The upward air flow carries
the normal operating noise away from the living area. The
rigid top panel effectively isolates any motor sound. Isolator
mounted compressor and the condenser coil muffle the normal fan motor and compressor operating sounds.
• Low Maintenance - Long life, permanently lubricated motorbearings need no annual servicing.
• Easy Service Access - Fully exposed refrigerant connections and a single panel covering the electrical controls make
for easy servicing of the unit.
• Secured Service Valves - Secured, re-usable service
valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
• Agency Listed - Safety certified by CSA to UL 1995 / CSA
22.2. Performance certified to ANSI/AHRI Standard 210/240
in accordance with the Unitary Small Equipment certification
program.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
571209-YTG-C-1012
B
C
A
Physical and Electrical Data
MODEL
YHJD18
S41S2
Unit Supply Voltage 208-230V, 1 60Hz
Normal Voltage Range
Minimum Circuit Ampacity
Max. Overcurrent Device Amps
Min. Overcurrent Device Amps
Compressor Type
Compressor Amps
Crankcase Heater
Factory External Discharge Muffler
Factory External Check Valve
HS Kit Required with TXV
Fan Motor Amps Rated Load
Fan Diameter Inches
Fan Motor
Coil
Liquid Line Set OD (Field Installed)
Vapor Line Set OD (Field Installed)
Unit Charge (Lbs. - Oz.)
Charge Per Foot, Oz.
Operating Weight Lbs.
1
2
3
Rated Load
Locked Rotor
4
Rated HP
Nominal RPM
Nominal CFM
Face Area Sq. Ft.
Rows Deep
Fins / Inch
5
11.9 11.2 14.1 19.7 20.9 25.6 42.6
20 15 20 30 35 45 70
15 15 15 20 25 30 45
Scroll Recip Recip Recip Recip Recip Scroll
9.0 8.3 10.6 14.7 15.7 19.4 33.0
48.0 43.0 54.0 74.0 88.0 88.0 134.0
No Yes Yes Yes Yes Yes No
Yes No No No No No Yes
No No No No No No No
No Yes Yes Yes Yes Yes* No
0.70 0.80 0.80 1.3 1.3 1.3 1.5
24 24 24 24 24 24 24
1/10 1/8 1/8 1/4 1/4 1/4 1/4
825 1075 1075 850 850 850 850
2000 2900 3000 3800 3800 3600 3550
15.7 18.3 21.0 23.6 23.6 23.6 23.6
1 1 1 1 1 2 2
22 22 22 22 22 18 18
3/8 3/8 3/8 3/8 3/8 3/8 3/8
3/4 3/4 3/4 3/4 7/8 7/8 1-1/8
6 - 6 9 - 6 9 - 0 10 - 0 9 - 10 14 - 12 15 - 0
0.62 0.62 0.62 0.62 0.67 0.67 .76
172 194 206 218 218 285 290
* These models are shipped with a Hard Start Kit installed at the factory.
1. Rated in accordance with AHRI Standa rd 110-2012, utilization range “A”.
2. Dual element fuses or HACR circuit breaker. Maximum allowable overcurrent protection.
3. Dual element fuses or HACR circuit breaker. Minimum recommended overcurrent protection.
4. See Hard Start Kit Accessory Installation Manual for Hard Start Kit part number for each model.
5. The Unit Charge is correct for the outdoor unit, smallest match ed in door unit , and 15 f eet of re fri gerant tub ing. For tubing l engths ot her than 1 5 f eet, a dd o r subt ract
the amount of refrigerant, using the difference in length multiplied by the per foot value.
YHJD24
S41S4
YHJD30
S41S4
YHJD36
S41S4
187 to 252
YHJD42
S41S4
YHJD48
S41S4
YHJD60
S41S5
Unit
Model
Dimensions
(Inches)
A B C Liquid Vapor
Refrigerant Connection
Service Valve Size
18 28-1/4 34 34
24 32-1/4 34 34
30 36-1/4 34 34
36 40-1/4 34 34
3/8
42 40-1/4 34 34
48 40-1/4 34 34
3/4
7/8
60 40-1/4 34 34 7/8*
* Adapter fitting required for 1-1/8" line set.
All dimensions are in inches and are subject to chang e without notice.
Overall height is from bottom of base pan to top of fan guard.
Overall length and width include screw heads.
2 Johnson Controls Unitary Products
571209-YTG-C-1012
System Charge for Various Matched Systems
Outdoor Unit YHJD18S41S2 YHJD24S41S4 YHJD30S41S4 YHJD36S41S4 YHJD42S41S4 YHJD48S41S4 YHJD60S41S5
1,2
Required Orifice or TXV
.051/4F1 .054, .059/4G1 .063/4G1 .071/4H1 .075/4H1 4J1 4K1
Indoor Unit
3,4,5
Additional Charge, Oz
AHE18B .051/ TXV + 0 – – – – – –
AHE24B – .054 / TXV + 0 – – – – –
AHE30B – .054 / TXV + 0 .063 / TXV + 0 – – – –
AHE36C – – .063 / TXV + 25 .071 / TXV + 0 – – –
AHE42D – – – .071 / TXV + 16 – – –
AHE48D – – – – .075 / TXV + 0 TXV + 0 –
AHE60D – – – – – TXV + 25 TXV + 0
AHR18B .051/ TXV + 0 – – – – – –
AHR24B – .054 / TXV + 0 – – – – –
AHR30B – – .063 / TXV + 0 – – – –
AHR36B – – .063 / TXV + 25 .071 / TXV + 6 – – –
AHR42C – – – .071 / TXV + 16 – – –
AHR48D – – – – .075 / TXV + 0 TXV + 0 –
AHR60D – – – – – TXV + 25 TXV + 0
AHV18B .051/ TXV + 0 – – – – – –
AHV24B – .054 / TXV + 0 – – – – –
AHV30B – .054 / TXV + 0 .063 / TXV + 0 – – – –
AHV36C – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
AHV42D – – – .071 / TXV + 16 – – –
AHV48D – – – – .075 / TXV + 0 TXV + 0 –
AHV60D – – – – – TXV + 25 TXV + 0
AV*24 .051/ TXV + 3 – – – – – –
AV*36 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
AV*48 – – – – .075 / TXV + 0 TXV + 0 –
AV*60 – – – – .075 / TXV + 0 TXV + 0 –
FC/MC/PC18 .051/ TXV + 0 – – – – – –
FC/MC/PC24 .051/ TXV + 5 – – – – – –
FC/MC/PC30 .051/ TXV + 5 – – – – – –
FC/MC/PC32 – .059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC35 – .059 / TXV + 0 .063 / TXV + 0 – – – –
FC/MC/PC37 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC43 – .059 / TXV + 23 .063 / TXV + 25 .071 / TXV + 6 – – –
FC/MC/PC/UC48 – – – .071 / TXV + 16 – – –
FC/MC/PC/UC60 – – – – .075 / TXV + 0 TXV + 0 –
FC/MC62 – – – – – TXV + 25 TXV + 0
FC64 – – – – – – TXV + 23
UC18 .051/ TXV + 1 – – – – – –
UC24 .051/ TXV + 7 – – – – – –
UC30 .051/ TXV + 7 – – – – – –
UC48 – – – .071 / TXV + 25 – – –
UC60 – – – – .075 / TXV + 2 TXV + 11 –
Some of the combinations shown in the above System Charge table require Advanced Main Air Circulating Fan indoor product. For approved coil
only matches, please see the “COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils” table.
FOOTNOTES:
1. For applications requ i ri ng a T X V use S1-1TVM*** series kit.
2. Approved orifice(s) shipped with outdoor unit.
3. Systems matched with furnaces or air handlers not equipped with blower-off delays may require blower Time Delay Kit S1-2FD06700224.
4. PC coils cannot be used in downflow or horizontal applications. FC coils cannot be used in horizontal applications.
5. Refer to Cooling and Heating Performance Data tables for actual perfo rmance for specified system matches.
PROCEDURES:
1. Unit factory charge listed on the unit nameplate includes refrigerant for the outdoor unit, the smallest matched indoor unit, and 15 feet of interconnectin g line tubing.
2. Verify the TXV or orifice and additional charge required for specific matched indoor unit in the system using the above table .
3. Add additional charge for the amount of interconnecting line tubing greater than 15 feet at the rate specified in Physical and Electrical Data Table .
4. For indoor matches requiring additional charge, the refrigerant needs to be weighed in for specific matched indoor unit and lineset length.
5. Permanently mark the unit nameplate with the total system charge. Total System Charge = Base Charge (as shipped) + charge adder for matched indoor unit +
charge adder for line set.
Johnson Controls Unitary Products 3
571209-YTG-C-1012
COOLING CAPACITY - With Air Handler Coils
UNIT
MODEL
YHJD18S41S2
YHJD24S41S4
YHJD30S41S4
YHJD36S41S4
For Notes See Page 5.
AIR HANDLER
MODEL WIDTH
13 SEER HP WITH AIR HANDLERS
AHE18B 17.5 – 610 18.0 14.6 14.00 12.00
AHR18B 17.5 – 665 18.0 14.9 13.00 11.00
AHV18B 17.5 – 615 18.0 13.2 14.00 12.00
AV*24 17.5 – 610 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC18B 600 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC24B 600 18.0 13.7 14.50 12.00
MV12B 17.5 FC/MC30B 600 18.0 13.7 14.50 12.00
MX12B 17.5 FC/MC18B 585 18.0 14.5 14.50 12.00
MX12B 17.5 FC/MC24B 645 18.0 15.0 14.50 12.00
MX12B 17.5 FC/MC30B 645 18.0 15.0 14.50 12.00
AHE24B 17.5 – 795 24.0 17.4 14.50 12.00
AHE30B 17.5 – 795 24.0 17.4 14.50 12.00
AHR24B 17.5 – 740 24.0 16.9 13.00 11.00
AHV24B 17.5 – 710 24.0 17.0 14.00 12.00
AHV30B 17.5 – 775 24.0 17.6 14.00 12.00
AHV36C 21.0 – 760 24.0 17.8 14.00 12.00
AV*36 21.0 – 725 24.0 17.0 14.50 12.00
MV12B 17.5 FC/MC35B 800 24.0 17.5 14.50 12.00
MV12B 17.5 FC/MC43B 800 24.0 17.3 14.50 12.00
MX12B 17.5 FC/MC35B 815 24.0 17.6 14.50 12.00
MX12B 17.5 FC/MC43B 735 24.0 17.1 14.50 12.00
AHE30B 17.5 – 985 29.2 21.0 14.00 12.00
AHE36C 21.0 – 1000 29.8 21.8 14.00 12.00
AHR30B 17.5 – 1090 29.2 21.8 13.00 11.00
AHR36B 17.5 – 1060 29.6 21.6 13.00 11.00
AHV30B 17.5 – 1000 29.6 27.0 13.50 11.50
AHV36C 21.0 – 895 29.8 26.6 14.00 12.00
AV*36 21.0 – 960 30.0 22.4 14.50 12.00
MV12B 17.5 FC/MC35B 1010 30.0 22.0 14.50 12.00
MV12B 17.5 FC/MC43B 1000 30.0 22.2 14.50 12.00
MV16C 21.0 FC/MC35C 1070 30.0 23.0 14.50 12.00
MV16C 21.0 FC/MC43C 1000 30.0 22.2 14.50 12.00
MX12B 17.5 FC/MC35B 1085 29.6 22.2 14.00 12.00
MX12B 17.5 FC/MC43B 1095 29.4 22.6 14.00 12.00
MX16C 21.0 FC/MC35C 1035 29.6 22.2 14.00 12.00
MX16C 21.0 FC/MC43C 970 29.6 21.6 14.00 12.00
AHE36C 21.0 – 1190 35.6 25.7 14.50 12.00
AHE42D 24.5 – 1180 35.6 25.6 14.50 12.00
AHR36B 21.0 – 1245 35.6 26.1 13.00 11.00
AHR42C 21.0 – 1230 35.6 25.8 13.00 11.00
AHV36C 21.0 – 1215 36.0 27.4 14.00 12.00
AHV42D 24.5 – 1180 36.0 27.6 14.50 12.00
AV*36 21.0 – 1190 36.0 26.8 14.50 12.00
MV12B 17.5 FC/MC43B 1225 36.0 27.2 14.50 12.00
MV12D 24.5 FC/MC48D 1160 36.0 26.6 14.50 12.00
MV16C 21.0 FC/MC43C 1200 36.0 26.8 14.50 12.00
MV16C 21.0 FC/MC48C 1200 36.0 26.6 14.50 12.00
MX12B 17.5 FC/MC43B 1220 35.6 26.0 14.00 12.00
MX12D 24.5 FC/MC48D 1225 35.6 25.7 14.50 12.00
MX16C 21.0 FC/MC43C 1140 35.6 25.5 14.00 12.00
MX16C 21.0 FC/MC48C 1150 35.6 25.6 14.00 12.00
COIL
MODEL
COOLING
1
RATED
CFM
NET MBH
TOTAL SENS.
SEER EER
4 Johnson Controls Unitary Products
571209-YTG-C-1012
COOLING CAPACITY - With Air Handler Coils (Continued)
UNIT
MODEL
AIR HANDLER
MODEL WIDTH
COIL
MODEL
1
RATED
CFM
TOTAL SENS.
13 SEER HP WITH AIR HANDLERS
AHE48D 24.5 – 1385 40.5 33.2 14.00 12.00
AHR48D 24.5 – 1320 39.5 29.6 13.00 11.00
AHV48D 24.5 – 1300 39.5 30.2 13.75 11.50
AV*48 24.5 – 1385 42.0 32.6 14.50 12.00
YHJD42S41S4
AV*60 24.5 – 1360 42.0 32.6 14.50 12.00
MV16C 21.0 FC60C 1400 40.0 30.0 13.50 11.75
MV20D 24.5 FC/MC60D 1400 42.0 32.4 14.00 12.00
MX16C 21.0 FC60C 1420 41.5 32.2 14.50 12.00
MX20D 24.5 FC/MC60D 1470 41.5 32.2 14.50 12.00
AHE48D 24.5 – 1635 44.0 33.2 14.00 12.00
AHE60D 24.5 – 1565 45.0 34.4 14.50 12.00
AHR48D 24.5 – 1610 43.5 32.8 13.00 11.00
AHR60D 24.5 – 1620 44.0 33.8 13.25 11.35
AHV48D 24.5 – 1585 44.5 33.2 14.50 12.00
AHV60D 24.5 – 1570 44.5 34.0 14.50 12.00
YHJD48S41S4
AV*48 24.5 – 1625 45.0 34.4 14.50 12.00
AV*60 24.5 – 1560 45.0 34.6 14.50 12.00
MV16C 21.0 FC60C 1625 44.5 34.2 14.50 12.00
MV20D 24.5 FC/MC60D 1600 44.5 33.8 14.50 12.00
MV20D 24.5 FC/MC62D 1630 45.5 34.4 14.50 12.00
MX16C 21.0 FC60C 1630 45.0 34.4 14.50 12.00
MX20D 24.5 FC/MC60D 1585 45.5 34.6 14.50 12.00
MX20D 24.5 FC/MC62D 1605 45.0 34.4 14.50 12.00
AHE60D 24.5 – 1950 58.0 41.50 13.00 11.00
AHR60D 24.5 – 1835 58.0 41.00 14.00 12.00
AHV60D 24.5 – 1635 57.5 39.0 13.75 11.80
YHJD60S41S5
MV20D 24.5 FC/MC62D 1855 58.0 41.5 13.75 11.80
MV20D 24.5 FC64D 1855 57.0 43.0 13.25 11.35
MX20D 24.5 FC/MC62D 1795 58.0 41.0 14.00 12.00
MX20D 24.5 FC64D 1795 57.0 42.5 13.75 12.00
Rated in accordance with DOE test procedures (Federal Register 12-27-79 and 3-18-88) and ANSI/AHRI Standar d 210/240.
Cooling MBH based on 80 °F entering air temperature, 50% RH (Relative Humidity), and rated air flow.
EER (Energy Efficiency Ratio) is the total cooling output in BTUs at 95 °F outdoor ambient divided by the total electric power in watt-hours at those conditions.
SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTUs during a normal annual usage period for cooling divided by the total electr ic power input in
watt-hours during the same period.
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
— = Not applicable.
MA Modular Air Handlers use Coil Only Ratings.
COOLING
NET MBH
SEER EER
Johnson Controls Unitary Products 5
571209-YTG-C-1012
COOLING CAPACITY - Upflow, Downflow & Horizontal Furnaces and Coils (Coil Only Ratings)
COIL
UNIT MODEL
MODEL WIDTH
CFM RANGE
(Min.-max.)
RATED
CFM
13 SEER HP COIL ONLY RATINGS
FC/MC/PC18 14.5,17.5 450 - 750 600 18.0 14.0 13.00 11.00
FC/MC/PC24 14.5,17.5 450 - 750 600 18.0 14.0 13.50 11.00
YHJD18S41S2
FC/MC/PC30 14.5,17.5 450 - 750 600 18.0 13.7 13.00 11.00
UC24 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
UC30 14.5,17.5 450 - 750 600 18.0 13.8 13.05 11.00
FC/MC/PC32 14.5 600 - 1000 800 23.8 17.1 13.00 11.00
YHJD24S41S4
FC/MC/PC35 17.5,21.0 600 - 1000 800 23.6 17.1 13.00 11.00
FC/MC/PC37 14.5 600 - 1000 800 24.0 17.3 13.00 11.00
FC/MC/PC43 17.5,21.0 600 - 1000 800 24.0 17.3 13.00 11.00
FC/MC/PC32 14.5 800 - 1200 1000 29.8 21.8 13.00 11.00
YHJD30S41S4
FC/MC/PC35 17.5,21.0 800 - 1200 1000 29.8 21.8 13.00 11.00
FC/MC/PC37 14.5 800 - 1200 1000 30.0 22.2 13.00 11.00
FC/MC/PC43 17.5,21.0 800 - 1200 1000 30.0 22.2 13.00 11.00
FC/MC/PC37 14.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
YHJD36S41S4
FC/MC/PC43 17.5,21.0 1000 - 1400 1200 36.0 26.6 13.00 11.00
FC/MC/PC48 21.0,24.5 1000 - 1400 1200 36.0 26.6 13.00 11.00
UC48 21.0,24.5 1000 - 1400 1200 36.0 26.8 13.00 11.00
YHJD42S41S4
FC/MC/PC60 21.0,24.5 1200 - 1600 1400 41.0 31.8 13.00 11.00
UC60 21.0,24.5 1200 - 1600 1400 40.5 31.0 13.00 11.00
FC/MC/PC60 21.0,24.5 1400 - 1800 1600 44.0 33.4 13.00 11.00
YHJD48S41S4
FC/MC62 24.5 1400 - 1800 1600 44.5 33.8 13.00 11.00
UC60 21.0,24.5 1400 - 1800 1600 44.0 32.8 13.00 11.00
YHJD60S41S5
1. Requires a S1-2FD06700224 Blower Time Delay unless a standard furnace is equipped with one.
MA Modular Air Handlers use Coil Only Ratings.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
FC/MC62 24.5 1600 - 2000 1800 57.5 41.0 13.25 11.35
FC64 24.5 1600 - 2000 1800 56.5 42.5 13.00 11.00
TOTAL SENS.
COOLING
NET MBH
SEER
1
EER
COOLING CAP ACITY - With High Efficiency Motor Furnaces
UNIT
MODEL
YHJD18S41S2
For Notes See Page 12.
FURNACE
MODEL WIDTH
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
T*(8,L)V*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50
T*(8,L)V*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50
T*(8,L)V*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30
T*(8,L)V*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50
T*(8,L)V*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50
T*(8,L)V*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
T*(8,L)V*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60
T*(8,L)V*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60
T*(8,L)V*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30
T*(8,L)V*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60
T*(8,L)V*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60
T*(8,L)X*A12 14.5 FC/MC/PC18A 540 18.0 14.3 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC24A 595 18.0 14.9 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC30A 595 18.0 14.9 14.00 12.00
T*(8,L)X*A12 14.5 UC18B 590 18.0 13.9 14.50 12.00
COIL
MODEL
1
RATED
CFM
COOLING
Net MBH
TOTAL SENS.
2
SEER EER
6 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YHJD18S41S2
For Notes See Page 12.
FURNACE
MODEL WIDTH
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)X*A12 14.5 UC24B 570 18.0 14.1 14.50 12.00
T*(8,L)X*A12 14.5 UC30B 570 18.0 14.1 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC18B 580 18.0 14.6 14.00 12.00
T*(8,L)X*B12 17.5 FC/MC/PC24B 620 18.0 14.9 14.00 12.00
T*(8,L)X*B12 17.5 FC/MC/PC30B 620 18.0 14.9 14.00 12.00
T*(8,L)X*B12 17.5 UC18B 595 18.0 13.9 14.50 12.00
T*(8,L)X*B12 17.5 UC24B 575 18.0 14.2 14.50 12.00
T*(8,L)X*B12 17.5 UC30B 575 18.0 14.2 14.50 12.00
T*9V*A10 17.5 FC/MC/PC18A 580 18.0 13.6 14.00 12.00
T*9V*A10 17.5 FC/MC/PC24A 575 18.0 14.0 14.00 12.00
T*9V*A10 17.5 FC/MC/PC30A 575 18.0 14.0 14.00 12.00
T*9(C,V)*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40
T*9(C,V)*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60
T*9(C,V)*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60
T*9(C,V)*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40
T*9(C,V)*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60
T*9(C,V)*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60
T*9X*A10 14.5 FC/MC/PC18A 575 18.3 13.7 14.00 12.00
T*9X*A10 14.5 FC/MC/PC24A 595 18.7 14.1 14.00 12.00
T*9X*A10 14.5 FC/MC/PC30A 595 18.7 14.1 14.00 12.00
T*9X*B12 17.5 FC/MC/PC18B 590 18.0 14.7 14.00 12.00
T*9X*B12 17.5 FC/MC/PC24B 615 18.0 14.9 14.00 12.00
T*9X*B12 17.5 FC/MC/PC30B 615 18.0 14.9 14.00 12.00
T*9X*B12 17.5 UC18B 17 590.0 18.5 13.90 14.50
T*9X*B12 17.5 UC24B 17 615.0 18.9 14.20 14.50
T*9X*B12 17.5 UC30B 17 615.0 18.9 14.20 14.50
Y*(8,L)C*A12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
Y*(8,L)C*A12 14.5 FC/MC/PC24A 640 18.0 12.7 14.80 12.50
Y*(8,L)C*A12 14.5 FC/MC/PC30A 640 18.0 12.7 14.80 12.50
Y*(8,L)C*A12 14.5 UC18A 620 18.0 12.4 14.60 12.30
Y*(8,L)C*A12 14.5 UC24A 640 18.0 12.8 14.80 12.50
Y*(8,L)C*A12 14.5 UC30A 640 18.0 12.8 14.80 12.50
Y*(8,L)C*B12 14.5 FC/MC/PC18A 620 18.0 12.3 14.50 12.30
Y*(8,L)C*B12 17.5 FC/MC/PC24B 575 18.0 12.2 14.90 12.60
Y*(8,L)C*B12 17.5 FC/MC/PC30B 575 18.0 12.2 14.90 12.60
Y*(8,L)C*B12 17.5 UC18B 580 18.0 12.0 14.60 12.30
Y*(8,L)C*B12 17.5 UC24B 575 18.0 12.3 14.90 12.60
Y*(8,L)C*B12 17.5 UC30B 575 18.0 12.3 15.00 12.60
Y*9C*B12 17.5 FC/MC/PC18B 610 18.0 12.2 14.60 12.40
Y*9C*B12 17.5 FC/MC/PC24B 610 18.0 12.7 14.90 12.60
Y*9C*B12 17.5 FC/MC/PC30B 610 18.0 12.7 14.90 12.60
Y*9C*B12 17.5 UC18B 610 18.0 12.3 14.80 12.40
Y*9C*B12 17.5 UC24B 610 18.0 12.8 14.90 12.60
Y*9C*B12 17.5 UC30B 610 18.0 12.8 15.00 12.60
COIL
MODEL
1
RATED
CFM
COOLING
Net MBH
TOTAL SENS.
2
571209-YTG-C-1012
SEER EER
Johnson Controls Unitary Products 7
571209-YTG-C-1012
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YHJD24S41S4
For Notes See Page 12.
FURNACE
MODEL WIDTH
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00
T*(8,L)V*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00
T*(8,L)V*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC32A 800 24.0 17.5 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 840 24.0 17.8 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC35B 850 24.0 17.6 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 865 24.0 18.0 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 865 24.0 17.6 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 855 24.0 17.9 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 885 24.0 17.6 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 815 24.0 17.3 14.50 12.00
T*9V*A10 14.5 FC/MC/PC32A 785 24.0 18.0 13.75 12.00
T*9V*A10 14.5 FC/MC/PC37A 790 24.0 18.4 13.85 12.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00
T*9(C,V)*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00
T*9X*A10 14.5 FC/MC/PC32A 745 24.0 17.6 13.75 12.00
T*9X*A10 14.5 FC/MC/PC37A 740 24.0 17.7 14.00 12.00
T*9X*B12 17.5 FC/MC/PC35B 785 24.0 17.4 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
T*9X*C16 21.0 FC/MC/PC35C 765 24.0 17.3 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 785 24.0 17.3 14.50 12.00
T*9X*C20 21.0 FC/MC/PC35C 825 24.0 17.6 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 790 24.0 17.3 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC32A 775 24.0 17.2 14.00 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 805 24.0 17.3 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC35B 760 24.0 17.2 14.00 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC43B 760 24.0 17.2 14.00 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC35C 855 24.0 17.6 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC43C 895 24.0 18.1 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC35C 740 24.0 17.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 760 24.0 17.2 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC35B 815 24.0 17.6 14.00 12.00
Y*9C*B12 17.5 FC/MC/PC43B 800 24.0 17.3 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC35C 900 24.0 18.1 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC43C 810 24.0 17.3 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC35C 755 24.0 17.2 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 890 24.0 18.1 14.50 12.00
COIL
MODEL
1
RATED
CFM
COOLING
Net MBH
TOTAL SENS.
2
SEER EER
8 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YHJD30S41S4
YHJD36S41S4
For Notes See Page 12.
FURNACE
MODEL WIDTH
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00
T*(8,L)V*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC32A 970 30.0 22.0 14.00 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 1105 30.0 23.2 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC35B 1120 30.0 23.2 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 1125 30.0 23.4 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC35C 1105 30.0 23.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 955 30.0 22.2 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC35C 850 29.8 21.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 870 30.0 21.6 14.50 12.00
T*9(C,V)*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50
T*9(C,V)*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00
T*9X*B12 17.5 FC/MC/PC35B 1085 30.0 23.0 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 1095 30.0 23.2 14.50 12.00
T*9X*C16 21.0 FC/MC/PC35C 1075 30.0 23.0 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 1055 30.0 22.8 14.50 12.00
T*9X*C20 21.0 FC/MC/PC35C 835 29.8 21.2 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 720 29.2 19.9 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC32A 1045 30.0 22.0 13.50 11.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 950 30.0 22.0 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC35B 995 30.0 22.0 14.50 12.00
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1040 30.0 22.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC35C 1025 30.0 22.0 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC43C 990 30.0 22.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC35C 1080 30.0 23.0 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1000 30.0 22.2 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC35B 1045 30.0 22.0 14.00 11.50
Y*9C*B12 17.5 FC/MC/PC43B 1035 30.0 22.2 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC35C 1005 30.0 22.0 14.50 12.00
Y*9C*C16 21.0 FC/MC/PC43C 1030 30.0 22.2 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC35C 985 30.0 22.0 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 995 30.0 22.2 14.50 12.00
T*(8,L)V*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50
T*(8,L)V*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50
T*(8,L)V*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00
T*(8,L)V*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00
T*(8,L)V*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00
T*(8,L)V*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00
COIL
MODEL
1
RATED
CFM
COOLING
Net MBH
TOTAL SENS.
2
571209-YTG-C-1012
SEER EER
Johnson Controls Unitary Products 9
571209-YTG-C-1012
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YHJD36S41S4
For Notes See Page 12.
FURNACE
MODEL WIDTH
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00
T*(8,L)V*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00
T*(8,L)X*A12 14.5 FC/MC/PC37A 1290 36.0 27.6 14.50 12.00
T*(8,L)X*B12 17.5 FC/MC/PC43B 1300 36.0 27.6 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC43C 1175 36.0 26.8 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC/PC48C 1185 36.0 26.6 14.50 12.00
T*(8,L)X*C16 21.0 UC48C 1185 36.0 26.8 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC43C 1250 36.0 27.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC/PC48C 1270 36.0 27.2 14.50 12.00
T*(8,L)X*C20 21.0 UC48C 1270 36.0 27.4 14.50 12.00
T*9(C,V)*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50
T*9(C,V)*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00
T*9(C,V)*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00
T*9(C,V)*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00
T*9(C,V)*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00
T*9(C,V)*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00
T*9(C,V)*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
T*9(C,V)*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
T*9X*B12 17.5 FC/MC/PC43B 1270 36.0 27.4 14.50 12.00
T*9X*C16 21.0 FC/MC/PC43C 1260 36.0 27.4 14.50 12.00
T*9X*C16 21.0 FC/MC/PC48C 1280 36.0 27.2 14.50 12.00
T*9X*C16 21.0 UC48C 1280 36.0 27.4 14.50 12.00
T*9X*C20 21.0 FC/MC/PC43C 1185 36.0 26.8 14.50 12.00
T*9X*C20 21.0 FC/MC/PC48C 1205 36.0 26.6 14.50 12.00
T*9X*C20 21.0 UC48C 1205 36.0 26.8 14.50 12.00
T*9X*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
T*9X*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
Y*(8,L)C*A12 14.5 FC/MC/PC37A 1150 36.0 26.4 13.75 11.50
Y*(8,L)C*B12 17.5 FC/MC/PC43B 1270 36.0 27.2 13.75 11.50
Y*(8,L)C*C16 21.0 FC/MC/PC43C 1205 36.0 26.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC/PC48C 1210 36.0 26.6 14.50 12.00
Y*(8,L)C*C16 21.0 UC48C 1210 36.0 26.8 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC43C 1190 36.0 26.8 14.50 12.00
Y*(8,L)C*C20 21.0 FC/MC/PC48C 1155 36.0 26.6 14.50 12.00
Y*(8,L)C*C20 21.0 UC48C 1155 36.0 26.8 14.50 12.00
Y*9C*B12 17.5 FC/MC/PC43B 1200 36.0 26.8 14.00 11.50
Y*9C*C16 21.0 FC/MC/PC43C 1240 36.0 27.0 14.00 12.00
Y*9C*C16 21.0 FC/MC/PC48C 1195 36.0 26.6 14.50 12.00
Y*9C*C16 21.0 UC48C 1195 36.0 26.8 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC43C 1200 36.0 26.8 14.50 12.00
Y*9C*C20 21.0 FC/MC/PC48C 1330 36.0 27.6 14.50 12.00
Y*9C*C20 21.0 UC48C 1330 36.0 27.8 14.50 12.00
Y*9C*D20 24.5 FC/MC/PC48D 1240 36.0 26.6 14.50 12.00
Y*9C*D20 24.5 UC48D 1240 36.0 26.8 14.50 12.00
COIL
MODEL
1
RATED
CFM
COOLING
Net MBH
TOTAL SENS.
2
SEER EER
10 Johnson Controls Unitary Products
COOLING CAPACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
YHJD42S41S4
YHJD48S41S4
For Notes See Page 12.
FURNACE
MODEL WIDTH
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*(8,L)V*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00
T*(8,L)V*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50
T*(8,L)V*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00
T*(8,L)V*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00
T*(8,L)X*C16 21.0 FC/PC60C 1360 42.0 32.6 14.50 12.00
T*(8,L)X*C16 21.0 UC60C 1400 41.5 31.6 14.00 12.00
T*(8,L)X*C20 21.0 FC/PC60C 1485 42.0 33.4 14.50 12.00
T*(8,L)X*C20 21.0 UC60C 1485 41.5 32.8 14.00 12.00
T*9(C,V)*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50
T*9(C,V)*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50
T*9(C,V)*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50
T*9(C,V)*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50
T*9(C,V)*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50
T*9(C,V)*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50
T*9X*C16 21.0 FC/PC60C 1460 42.0 33.2 14.00 12.00
T*9X*C16 21.0 UC60C 1460 41.0 31.4 13.75 11.50
T*9X*C20 21.0 FC/PC60C 1460 42.0 33.2 14.50 12.00
T*9X*C20 21.0 UC60C 1460 41.5 31.6 14.00 12.00
T*9X*D20 24.5 FC/MC/PC60D 1515 42.0 33.6 14.50 12.00
T*9X*D20 24.5 UC60D 1515 42.0 33.2 14.50 12.00
Y*(8,L)C*C16 21.0 FC/PC60C 1420 41.5 32.2 14.00 12.00
Y*(8,L)C*C16 21.0 UC60C 1420 41.0 31.4 13.75 11.50
Y*(8,L)C*C20 21.0 FC/PC60C 1410 42.0 32.4 14.00 12.00
Y*(8,L)C*C20 21.0 UC60C 1410 41.0 31.4 14.00 12.00
Y*9C*C16 21.0 FC/PC60C 1445 41.0 32.0 13.25 11.50
Y*9C*C16 21.0 UC60C 1445 40.5 31.0 13.20 11.50
Y*9C*C20 21.0 FC/PC60C 1445 41.5 32.0 13.75 11.50
Y*9C*C20 21.0 UC60C 1445 41.0 31.2 13.50 11.50
Y*9C*D20 24.5 FC/MC/PC60D 1445 41.5 32.2 13.75 11.50
Y*9C*D20 24.5 UC60D 1445 41.0 31.4 13.50 11.50
T*(8,L)V*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00
T*(8,L)V*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00
T*(8,L)V*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00
T*(8,L)V*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00
T*(8,L)V*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00
T*(8,L)V*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/MC62D 1610 45.0 34.2 14.50 12.00
T*(8,L)X*C16 21.0 FC/PC60C 1605 44.5 33.8 14.50 12.00
T*(8,L)X*C16 21.0 UC60C 1605 44.5 33.2 14.50 12.00
T*(8,L)X*C20 21.0 FC/MC62D 1665 45.5 34.4 14.50 12.00
T*(8,L)X*C20 21.0 FC/PC60C 1595 44.5 34.0 14.50 12.00
T*(8,L)X*C20 21.0 UC60C 1540 45.0 33.6 14.50 12.00
T*9(C,V)*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00
T*9(C,V)*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00
T*9(C,V)*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00
T*9(C,V)*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00
T*9(C,V)*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00
T*9(C,V)*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50
COIL
MODEL
1
RATED
CFM
COOLING
Net MBH
TOTAL SENS.
2
571209-YTG-C-1012
SEER EER
Johnson Controls Unitary Products 11
571209-YTG-C-1012
COOLING CAP ACITY - With High Efficiency Motor Furnaces (Continued)
UNIT
MODEL
FURNACE
MODEL WIDTH
13 SEER HP WITH HIGH EFFICIENCY MOTOR FURNACES
T*9(C,V)*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
T*9(C,V)*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
T*9(C,V)*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
T*9X*C16 21.0 FC/MC62D 1550 45.0 34.2 14.50 12.00
T*9X*C16 21.0 FC/PC60C 1575 44.5 33.8 14.50 12.00
T*9X*C16 21.0 UC60C 1575 44.5 33.2 14.50 12.00
T*9X*C20 21.0 FC/MC62D 1595 45.0 34.2 14.50 12.00
T*9X*C20 21.0 FC/PC60C 1625 44.5 34.0 14.50 12.00
T*9X*C20 21.0 UC60C 1625 44.5 33.2 14.50 12.00
T*9X*D20 24.5 FC/MC/PC60D 1490 45.5 33.6 14.50 12.00
T*9X*D20 24.5 FC/MC62D 1610 45.0 34.2 14.50 12.00
T*9X*D20 24.5 UC60D 1490 44.5 32.8 14.50 12.00
Y*(8,L)C*C16 21.0 FC/MC62D 1635 45.0 34.2 14.50 12.00
YHJD48S41S4
Y*(8,L)C*C16 21.0 FC/PC60C 1600 44.5 33.6 14.00 12.00
Y*(8,L)C*C16 21.0 UC60C 1625 44.0 33.0 14.00 12.00
Y*(8,L)C*C20 21.0 FC/MC62D 1615 45.0 34.2 14.50 12.00
Y*(8,L)C*C20 21.0 FC/PC60C 1620 44.5 33.8 14.00 12.00
Y*(8,L)C*C20 21.0 UC60C 1605 44.5 33.2 14.50 12.00
Y*9C*C16 21.0 FC/MC62D 1590 45.0 34.0 14.00 12.00
Y*9C*C16 21.0 FC/PC60C 1590 44.0 33.6 14.00 12.00
Y*9C*C16 21.0 UC60C 1590 44.0 33.0 14.00 12.00
Y*9C*C20 21.0 FC/MC62D 1655 44.5 33.8 14.00 12.00
Y*9C*C20 21.0 FC/PC60C 1645 44.0 33.6 14.00 12.00
Y*9C*C20 21.0 UC60C 1645 44.0 33.0 13.75 11.50
Y*9C*D20 24.5 FC/MC/PC60D 1615 44.5 33.6 14.00 12.00
Y*9C*D20 24.5 FC/MC62D 1630 45.0 34.0 14.00 12.00
Y*9C*D20 24.5 UC60D 1615 44.0 33.0 14.00 12.00
T*(8,L)V*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
T*(8,L)V*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
T*(8,L)X*C20 21.0 FC/MC62D 1665 57.5 40.0 14.00 12.00
T*(8,L)X*C20 21.0 FC64D 1665 56.0 41.0 13.75 11.60
T*9(C,V)*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
T*9(C,V)*C20 21.0 FC64D 1630 55.5 40.5 13.25 11.40
T*9(C,V)*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
T*9(C,V)*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
YHJD60S41S5
T*9X*C20 21.0 FC/MC62D 1595 57.5 40.0 14.00 12.00
T*9X*C20 21.0 FC64D 1595 55.5 40.0 13.50 11.40
T*9X*D20 24.5 FC/MC62D 1645 57.5 40.0 14.00 12.00
T*9X*D20 24.5 FC64D 1645 56.0 40.5 13.50 11.40
Y*(8,L)C*C20 21.0 FC/MC62D 1600 57.0 39.5 13.70 11.60
Y*(8,L)C*C20 21.0 FC64D 1855 57.0 42.5 13.25 11.40
Y*9C*C20 21.0 FC/MC62D 1655 57.0 39.5 13.50 11.60
Y*9C*C20 21.0 FC64D 1655 55.5 40.5 13.20 11.30
Y*9C*D20 24.5 FC/MC62D 1630 57.5 39.5 13.70 11.60
Y*9C*D20 24.5 FC64D 1630 55.5 40.0 13.25 11.40
1. MC coils available with a factory installed horizontal drain pan. See price pages for specific model number.
2. High Efficiency Motor Furnaces have B.O.D (Blower on Delay) standard.
PSC furnaces, such as the TG8S, TGLS, and TG9S, use Coil Only Ratings.
COIL
MODEL
1
RATED
CFM
COOLING
Net MBH
TOTAL SENS.
2
SEER EER
12 Johnson Controls Unitary Products
HEATING CAPACITY - With Air Handler
UNIT
MODEL
YHJD18S41S2
YHJD24S41S4
YHJD30S41S4
YHJD36S41S4
For Notes See Page 14.
AIR
HANDLER
AHE18B – 18.0 3.70 1.43 11.1 2.28 1.43 7.70
AHR18B – 18.0 3.54 1.49 11.4 2.22 1.50 7.70
AHV18B – 18.0 3.50 1.51 11.1 2.22 1.46 8.00
AV*24 – 18.0 3.66 1.36 9.9 2.78 1.06 8.20
MV12B FC/MC18B 18.0 3.58 1.39 8.6 2.52 1.24 7.95
MV12B FC/MC24B 18.0 3.62 1.36 10.6 2.88 1.03 8.10
MV12B FC/MC30B 18.0 3.62 1.36 10.6 2.88 1.03 8.10
MX12B FC/MC18B 18.0 3.70 1.43 11.0 2.28 1.41 8.20
MX12B FC/MC24B 18.0 3.98 1.33 10.9 2.46 1.30 8.20
MX12B FC/MC30B 18.0 3.98 1.33 10.9 2.46 1.30 8.20
AHE24B – 23.43.581.9213.32.501.568.20
AHE30B – 23.4 3.58 1.92 13.3 2.50 1.56 8.20
AHR24B – 23.4 3.40 2.02 13.5 2.40 1.65 7.70
AHV24B – 22.6 3.46 1.91 13.2 2.50 1.55 8.00
AHV30B – 23.0 3.52 1.91 13.3 2.50 1.56 8.20
AHV36C – 23.4 3.64 1.88 13.3 2.56 1.52 8.20
AV*36 – 23.2 3.64 1.87 13.3 2.62 1.49 8.20
MV12B FC/MC35B 23.2 3.56 1.91 13.3 2.54 1.53 8.20
MV12B FC/MC43B 23.8 3.66 1.91 13.5 2.60 1.52 8.20
MX12B FC/MC35B 23.2 3.64 1.87 13.0 2.56 1.49 8.20
MX12B FC/MC43B 23.2 3.62 1.88 13.0 2.54 1.50 8.20
AHE30B – 26.63.402.2915.52.421.887.70
AHE36C – 26.8 3.56 2.21 15.3 2.50 1.79 7.70
AHR30B – 27.6 3.30 2.45 16.2 2.32 2.05 7.70
AHR36B – 27.8 3.36 2.42 16.2 2.32 2.05 7.70
AHV30B – 28.0 3.48 2.36 15.5 2.30 1.97 7.70
AHV36C – 27.6 3.62 2.23 15.0 2.42 1.82 8.20
AV*36 – 27.2 3.66 2.18 15.4 2.54 1.78 8.20
MV12B FC/MC35B 26.8 3.50 2.24 15.4 2.48 1.82 8.00
MV12B FC/MC43B 27.4 3.58 2.24 15.6 2.46 1.86 8.20
MV16C FC/MC35C 27.0 3.56 2.22 15.4 2.50 1.80 8.15
MV16C FC/MC43C 27.4 3.60 2.23 15.5 2.48 1.83 8.20
MX12B FC/MC35B 26.8 3.46 2.27 15.5 2.44 1.86 7.70
MX12B FC/MC43B 27.2 3.56 2.24 15.6 2.48 1.84 7.70
MX16C FC/MC35C 26.4 3.56 2.17 15.2 2.52 1.77 7.70
MX16C FC/MC43C 26.4 3.56 2.17 15.2 2.50 1.78 7.70
AHE36C – 30.63.442.6121.62.842.238.20
AHE42D – 30.6 3.48 2.93 21.4 2.88 2.42 8.20
AHR36B – 31.4 3.28 2.80 22.6 2.68 2.47 7.70
AHR42C – 31.4 3.32 2.77 22.2 2.70 2.41 7.70
AHV36C – 30.8 3.42 2.64 22.0 2.78 2.32 8.00
AHV42D – 30.6 3.46 2.59 21.6 2.88 2.20 8.20
AV*36 – 33.8 3.60 2.75 21.8 2.80 2.28 8.20
MV12B FC/MC43B 34.2 3.58 2.80 21.8 2.76 2.31 8.20
MV12D FC/MC48D 33.8 3.70 2.68 21.6 2.86 2.21 8.20
MV16C FC/MC43C 33.8 3.60 2.75 21.6 2.78 2.28 8.20
MV16C FC/MC48C 34.0 3.64 2.74 21.8 2.82 2.27 8.20
MX12B FC/MC43B 30.8 3.38 2.67 21.8 2.78 2.30 7.70
MX12D FC/MC48D 30.8 3.48 2.59 21.6 2.84 2.23 8.20
MX16C FC/MC43C 30.2 3.44 2.57 21.0 2.84 2.17 7.70
MX16C FC/MC48C 30.2 3.48 2.54 21.4 2.88 2.18 7.70
1
COIL
MODEL
13 SEER HP WITH AIR HANDLERS
MBH COP KW MBH COP KW STD
47 F 17 F HSPF
HEATING
571209-YTG-C-1012
2
Johnson Controls Unitary Products 13
571209-YTG-C-1012
HEATING CAPACITY - With Air Handler (Continued)
UNIT
MODEL
AIR
HANDLER
COIL
MODEL
1
47 F 17 FHSPF
MBH COP KW MBH COP KW STD
HEATING
13 SEER HP WITH AIR HANDLERS
AHE48D – 39.03.903.0021.82.642.528.20
AHR48D – 40.0 3.66 3.20 22.4 2.48 2.65 7.70
AHV48D – 39.5 3.86 3.00 21.0 2.54 2.42 8.20
AV*48 – 39.5 3.96 2.92 22.2 2.68 2.43 8.20
YHJD42S41S4
AV*60 – 39.5 3.98 2.91 22.2 2.70 2.41 8.20
MV16C FC60C 40.0 3.86 3.04 21.4 2.50 2.51 8.20
MV20D FC/MC60D 39.5 3.94 2.94 22.2 2.66 2.45 8.20
MX16C FC60C 40.0 4.08 2.87 22.0 2.66 2.42 8.20
MX20D FC/MC60D 40.0 4.10 2.86 21.8 2.68 2.38 8.20
AHE48D – 45.53.683.6226.82.842.768.20
AHE60D – 44.5 3.72 3.50 26.4 2.90 2.67 8.20
AHR48D – 46.0 3.56 3.79 27.4 2.74 2.93 7.70
AHR60D – 45.5 3.52 3.79 27.2 2.74 2.91 7.75
AHV48D – 44.5 3.56 3.66 26.4 2.78 2.78 8.20
AHV60D – 45.0 3.62 3.64 26.8 2.82 2.78 8.20
YHJD48S41S4
AV*48 – 46.0 3.78 3.57 26.8 2.90 2.71 8.20
AV*60 – 45.5 3.80 3.51 26.8 2.94 2.67 8.20
MV16C FC60C 45.0 3.70 3.56 26.6 2.90 2.69 8.20
MV20D FC/MC60D 45.5 3.72 3.58 27.0 2.86 2.77 8.20
MV20D FC/MC62D 45.0 3.72 3.54 26.6 2.90 2.69 8.20
MX16C FC60C 45.0 3.80 3.47 26.2 2.96 2.59 8.20
MX20D FC/MC60D 45.5 3.84 3.47 26.6 2.94 2.65 8.20
MX20D FC/MC62D 45.5 3.80 3.51 26.4 2.94 2.63 8.20
AHE60D – 58.03.545.0139.02.764.148.20
AHR60D – 58.0 3.44 5.28 40.0 2.68 4.37 8.15
AHV60D – 58.0 3.42 5.18 39.0 2.68 4.26 8.15
YHJD60S41S5
MV20D FC/MC62D 58.0 3.52 5.08 39.0 2.72 4.20 8.20
MV20D FC64D 58.0 3.40 5.34 40.5 2.80 4.24 8.10
MX20D FC/MC62D 58.0 3.58 4.95 38.5 2.76 4.09 8.20
MX20D FC64D 58.03.445.2040.02.864.108.15
1. Rated CFM same as for cooling.
2. Heating MBH based on AHRI standards of 70 °F DB (Dry Bulb) entering indoo r air, 72% RH (Relative Humidity) outdoor air wit h 25 feet of interconne cting pipin g and
no supplemental electric heat operation.
COP equals MBH output divided by (total KW input x 3.412).
HSPF (Heating Seasonal Performance Factor) is the tot al heati ng output d uring a normal a nnual usage period f or heating di vided by the tot al electric power input during
the same period.
MA Modular Air Handlers use Coil Only Ratings.
— = Not Applicable.
2
14 Johnson Controls Unitary Products
Loading...