User’s
Manual
AQ2200 Series Modules
Checking the Contents of the Package and
Handling Precautions of the Modules
Thank you for purchasing the AQ2200 Series Modules.
To ensure correct use, please read this manual thoroughly before beginning operation. For details on the
functions and performance, see the AQ2200 Multi Application Test System User’s Manual (IM 735101-01EN,
IM 735101-03EN or IM 810518920-05E).
The following manuals, including this one, are provided as manuals for the AQ2200 Series. Please read all
manuals.
Manual Title Manual No. Description
AQ2200 Series
Multi Application Test System
User’s Manual Startup Guide
AQ2200 Series
Multi Application Test System
Frame and Module Operation
User’s Manual
AQ2200 Series
Multi Application Test System
Application Operation User’s Manual
AQ2200 Series
Multi Application Test System
Communication Interface User’s Manual
64 Mbit Program Pattern Option
User’s Manual
SDH/SONET Frame Option
User’s Manual
AQ2200 Series Modules
Checking the Contents of the Package
and Handling Precautions of the Modules
Connector adapter for multi-fiber cable
User’s Manual
The “EN” and “E” in the manual numbers are the language codes.
IM 735101-01EN The supplied CD contains the PDF file of this manual.
This manual describes the handling precautions for, the
names and functions of all parts of, and the firmware
upgrade procedure for the AQ2200 Series.
IM 735101-03EN The supplied CD contains the PDF file of this manual.
This manual describes all the features of the AQ2200 Series
and how to use them, with the exception of some of the
application and communication features.
IM 735101-04EN The supplied CD contains the PDF file of this manual.
This manual describes the AQ2200 Series application
features and how to use them.
IM735101-17EN The supplied CD contains the PDF file of this manual.
This manual describes the AQ2200 Series communication
interface features and how to use them.
IM 810518801-61E This manual describes how to create program patterns for
the AQ2200-601 10 Gbit/s BERT module with the /M option.
IM 810518801-62E This manual describes how to create SDH/SONET patterns
for the AQ2200-601 10 Gbit/s BERT module with the /P1
option.
IM 810518901-04E This manual. This is included with AQ2200 Series modules.
It explains the handling precautions of the module and lists
the package contents.
IM AQ9340-01EN This manual explains the handling precautions of the
connector adapters and how to use them.
The latest editions of manuals and firmware (AQ2211, AQ2212, AQ2201, or AQ2202 software) are available to
registered customers for download from our website. You can register from the following website.
http://tmi.yokogawa.com/
Contact information of Yokogawa offices worldwide is provided on the following sheet.
Manual No. Description
PIM 113-01Z2 List of worldwide contacts
Safety Precautions
The general safety precautions described herein must be observed during all phases of operation. If the
instrument is used in a manner not specified in this manual, the protection provided by the instrument may be
impaired. YOKOGAWA assumes no liability for the customer’s failure to comply with these requirements.
The following symbols are used on this instrument.
Handle with care. Refer to the user’s manual or service manual. This symbol appears on dangerous
locations on the instrument which require special instructions for proper handling or use. The same
symbol appears in the corresponding place in the manual to identify those instructions.
Laser radiation hazard
French
À manipuler délicatement. Toujours se reporter aux manuels d’utilisation et d’entretien. Ce symbole a
été apposé aux endroits dangereux de l’instrument pour lesquels des consignes spéciales d’utilisation
ou de manipulation ont été émises. Le même symbole apparaît à l’endroit correspondant du manuel
pour identifier les consignes qui s’y rapportent.
Danger : Appareil laser à rayonnement.
12th Edition: September 2018 (YMI)
All Rights Reserved, Copyright © 2007, Yokogawa Electric Corporation
All Rights Reserved, Copyright © 2012, Yokogawa Test & Measurement Corporation
Printed in Japan
IM 810518901-04E 1/10
12th Edition
Safty Precautions of the Modules
The following precautions must be observed when handling the modules. YOKOGAWA assumes no liability for
the customer’s failure to comply with these requirements. For details on the installation/removal procedure and
the specifications of the modules, see the AQ2200 Multi Application Test System User’s Manual (IM 735101-01EN
or IM 810518920-05E).
WARNING
Use the Instrument Only for Its Intended Purpose
This optical measuring instrument is designed to measure the optical characteristics of light
sources and evaluate their performance. Do not use this instrument for anything other than as
an optical measuring instrument.
Check the Physical Appearance
Do not use the instrument if there is a problem with its physical appearance.
Do Not Operate in an Explosive Atmosphere
Do not operate the instrument in the presence of flammable gasses or vapors. Doing so is
extremely dangerous.
Do Not Remove the Covers or Disassemble or Alter the Instrument
Only qualified YOKOGAWA personnel may remove the covers and disassemble or alter the
instrument.
Blank Panel
Make sure to put the AQ2200-901 Blank Panel on the slots that are not being used to prevent
electric shock and to satisfy the specifications. Using the main unit without the Blank Panel
allows dust to enter the main unit and may cause malfunction due to the rise in temperature
inside the main unit.
Do not look at the laser’s direct light
Do not look at the laser’s direct light, reflected light from a mirror, or indirect light without proper
protective eyewear. In addition, avoid being exposed to the laser light. It can cause blindness or
damage to the eye. Place a cover over unused optical connectors.
Angled PC Only Connector
Only connect an angled-physical contact type optical fiber to the ANGLED PC ONLY connector.
Other types of connectors can damage the connector’s ferrule end.
Dispose the Instrument Properly
Do not throw this instrument into a fire to dispose of it. Doing so may cause the instrument to
explode, resulting in fire or personal injury.
The devices used in this instrument contain gallium arsenide (GaAs) and indium phosphide (InP).
When you dispose this instrument, you must separate it from general industrial waste and
household garbage, and dispose of it according to local regulations.
Additionally, gallium arsenide powder and vapor are dangerous substances. Do not burn, cut,
crush, chemically disassemble, or otherwise destroy this instrument.
Install or Use the Instrument in Appropriate Locations
• Do not install or use the instrument outdoors or in locations subject to rain or water.
• Install the instrument so that you can immediately remove the power cord if an abnormal or
dangerous condition occurs.
2/10 IM 810518901-04E
French
AVERTISSEMENT
Utiliser l’instrument aux seules fins prévues
Cet instrument de mesure optique est prévu pour mesurer les caractéristiques optiques des
sources lumineuses et évaluer leur performance. Ne pas utiliser cet instrument à d’autres fins
que celles de mesure optique.
Inspecter l’apparence physique
Ne pas utiliser l’instrument si son intégrité physique semble être compromise.
Ne pas utiliser dans un environnement explosif
Ne pas utiliser l’instrument en présence de gaz ou de vapeurs inflammables.
Cela pourrait être extrêmement dangereux.
Ne pas retirer le capot, ni démonter ou modifier l’instrument
Seul le personnel YOKOGAWA qualifié est habilité à retirer le capot et à démonter ou modifier
l’instrument.
Panneau vide
Pour éviter tout choc électrique et garantir un fonctionnement de l’instrument conforme aux
spécifications, veiller à couvrir tous les emplacements non utilisés des panneaux vides vendus
séparément. Si vous utilisez l’instrument sans couvrir les emplacements non utilisés des
panneaux vides, celui-ci risque de ne pas fonctionner correctement en raison de l’accumulation
de poussière ou d’une surchauffe interne.
Faisceau laser
Ne pas fixer directement ou indirectement le faisceau laser, ni la réflexion spéculaire du
faisceau en l’absence d’équipement de protection. Ne pas orienter le faisceau laser en direction
des yeux. Le faisceau laser peut entraîner la cécité ou causer des lésions oculaires. Recouvrir
le connecteur optique à l’aide du cache pendant les périodes de non-utilisation.
Connecteur optique ANGLED PC ONLY
Ne brancher que des fibres optiques de type APC (contact physique avec angle) au connecteur
optique ANGLED PC ONLY. D’autres types de connecteurs pourraient endommager l’embout
du connecteur.
Mettre l’instrument au rebut de manière adéquate
Ne pas mettre l’instrument au rebut en le jetant au feu. Il risquerait d’exploser et de provoquer
un incendie ou de blesser quelqu’un.
Les dispositifs utilisés avec cet instrument contiennent de l’arséniure de gallium (AsGa) et du
phosphure d’indium (InP). Lors de la mise au rebut de l’instrument, vous ne devez pas l’associer
aux déchets industriels généraux ni aux déchets domestiques, mais l’éliminer conformément
aux réglementations locales.
De plus, la poudre et les vapeurs d’arséniure de gallium sont des substances dangereuses. Ne
pas brûler, couper, écraser, démonter chimiquement ou détruire cet instrument.
Installer et utiliser l’instrument aux emplacements appropriés
• Ne pas installer, ni utiliser l’instrument à l’extérieur ou dans des lieux exposés à la pluie ou à
l’eau.
• Installer l’instrument de manière à pourvoir immédiatement le débrancher du secteur en cas
de fonctionnement anormal ou dangereux.
3/10IM 810518901-04E
Safety Precautions for Laser Products
Laser Class 1 Label
Laser Class 1M Label
Using an optical instrument, such as a loupe,
magnifying glass, or microscope, when
observing the laser beam from a distance of
less than 100 mm may cause eye injury.
Do not expose users of binoculars or
telescopes.
Skin exposure near aperture may cause
burns.
This instrument uses a laser light source. This instrument is a Class 1M laser product as defined by IEC60825-1
Safety of Laser Products—Part1: Equipment Classification and Requirements. In addition, this instrument
complies with 21 CFR 1040.10 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
CLASS 1 LASER PRODUCT
(IEC 60825-1:2007)
Model Class
810518901 1M DFB-Laser 1310 to 1650 nm 40 mW
810518902 1 FP-Laser 1310/1550 nm 10 mW
810518903 1 FP-Laser 1310/1550 nm 10 mW
810518904 1M EC-Laser 1440 to 1640 nm 50.2 mW
AQ2200131 1M ITLA 1527.60 to 1608.76 nm 63 mW
AQ2200132 1M ITLA 1527.60 to 1608.76 nm 63 mW
Laser
Type
Center Wavelength
Maximum
Output
Power
Mode
Field
Diameter
9
m
μ
9
m
μ
9
m
μ
9
m
μ
9
m
μ
9
m
μ
Beam Divergence
(full angle at 1/e2)
11.5 degree CW
11.5 degree CW
11.5 degree CW
11.5 degree CW
11.5 degree CW
11.5 degree CW
Pulse Duration
and Repetition
Rate
Note
• Commercially available XFP transceivers installed in the AQ2200-641 XFP Interface Module are not covered under
warranty.
• For save handling of the laser, consult the user’s manual that came with the XFP transceiver.
4/10 IM 810518901-04E
Waste Electrical and Electronic Equipment
Waste Electrical and Electronic Equipment (WEEE), Directive
(This directive is valid only in the EU.)
This product complies with the WEEE Directive marking requirement. This marking indicates that
you must not discard this electrical/electronic product in domestic household waste.
Product Category
With reference to the equipment types in the WEEE directive, this product is classified as a
“Monitoring and control instruments” product.
When disposing of products in the EU, contact your local Yokogawa Europe B.V. office.
Do not dispose in domestic household waste.
Authorized Representative in the EEA
Yokogawa Europe B.V. is the authorized representative of Yokogawa Test & Measurement Corporation for this
product in the EEA. To contact Yokogawa Europe B.V., see the separate list of worldwide contacts, PIM 113-01Z2.
About Environmental Standard
The following modules
Model Module Name/Application Name
810518901 AQ2200-111 DFB-LD Module
AQ2200131-T4 AQ2200-131 Grid TLS Module(suffix code is -T4 (standard) model)
AQ2200132-T4 AQ2200-132 Grid TLS Module(suffix code is -T4 (standard) model)
810518902 AQ2200-141 FP-LD Module
810518903 AQ2200-142 DUAL FP-LD Module
810518904 AQ2200-136 TLS Module
810518905 AQ2200-201 Interface Module
810518906 AQ2200-231 Optical Sensor Head (Long-Wavelength Sensor)
810518907 AQ2200-241 Optical Sensor Head (Short-Wavelength Sensor)
810518908 AQ2200-211 Sensor Module (High-Sensitivity Sensor)
735185 AQ2200-271 ORL Module
810518915 AQ2200-311 ATTN Module
810518801 AQ2200-601 BERT Module
810518802 AQ2200-621 10 Gbit/s Optical Modulator (Wavelength 1.55 μm)
810518804 AQ2200-622 10 Gbit/s Optical Modulator (Wavelength 1.31 μm)
810518803 AQ2200-631 10 Gbit/s Optical Receiver
735161 AQ2200-641 XFP Interface Module
do not comply with environment regulation standard EN50581.
Compatibility between the AQ2211/AQ2212 Software Version and AQ2200 Series
Modules
Some modules cannot be used with older versions of the AQ2211/AQ2212 software. Refer to the table below
for version requirements. If your AQ2211/AQ2212 requires a newer version of the software, download from our
website.
To determine the software version, press the SYSTEM soft key and then the “Information”. The version number
is displayed under “FIRM VER” in the Overview screen.
Model Module Name/Application Name
810518901 AQ2200-111 DFB-LD Module 1.01 and later
810518902 AQ2200-141 FP-LD Module 1.01 and later
810518903 AQ2200-142 DUAL FP-LD Module 1.01 and later
AQ2200131-T2, -T4 AQ2200-131 Grid TLS Module 3.00 and later
AQ2200131-T6 AQ2200-131 Grid TLS Module 3.05 and later
AQ2200132-T2, -T4 AQ2200-132 Grid TLS Module 3.00 and later
AQ2200132-T6 AQ2200-132 Grid TLS Module 3.05 and later
810518904 AQ2200-136 TLS Module 2.20 and later
810518905 AQ2200-201 Interface Module 1.01 and later
AQ2200202 AQ2200-202 Interface Module 3.05 and later
810518906 AQ2200-231 Optical Sensor Head (Long-Wavelength Sensor) 1.01 and later
AQ2211/AQ2212 Version
(FIRM VER)
5/10IM 810518901-04E
Model Module Name/Application Name
AQ2200232 AQ2200-232 Optical Sensor Head (Long-Wavelength Sensor) 3.05 and later
810518907 AQ2200-241 Optical Sensor Head (Short-Wavelength Sensor) 1.01 and later
AQ2200242 AQ2200-242 Optical Sensor Head (Short-Wavelength Sensor) 3.06 and later
810518908 AQ2200-211 Sensor Module (High-Sensitivity Sensor) 1.01 and later
735122 AQ2200-221 Sensor Module (Dual) 1.01 and later
735125 AQ2200-215 Sensor Module (High Power Sensor) 1.01 and later
735185 AQ2200-271 ORL Module 1.01 and later
810518915 AQ2200-311 ATTN Module 1.01 and later
735131 AQ2200-311A ATTN Module 1.01 and later
AQ2200312 AQ2200-312 ATTN Module 3.04 and later
735133 AQ2200-331 ATTN Module (Built-in Monitor Power Meter) 1.01 and later
AQ2200332 AQ2200-332 ATTN Module (Built-in Monitor Power Meter) 3.04 and later
AQ2200342 AQ2200-342 DUAL ATTN Module (Built-in Monitor Power Meters) 3.01 and later
735141 AQ2200-411 OSW Module 1.01 and later
735142 AQ2200-421 OSW Module (Dual) 1.01 and later
735143 AQ2200-412 OSW Module (1 × 16) 1.01 and later
810518801 AQ2200-601 BERT Module 2.10 and later
810518802 AQ2200-621 10 Gbit/s Optical Modulator (Wavelength 1.55 μm) 2.10 and later
810518804 AQ2200-622 10 Gbit/s Optical Modulator (Wavelength 1.31 μm) 2.10 and later
810518803 AQ2200-631 10 Gbit/s Optical Receiver 2.10 and later
735161 AQ2200-641 XFP Interface Module 2.01 and later
735162 AQ2200-642 Transceiver I/F Module 2.01 and later
735163 AQ2200-651 SG Module 2.01 and later
AQ2211/AQ2212 Version
(FIRM VER)
Compatibility between the AQ2201/AQ2202 Software Version and AQ2200 Series
Modules
Some modules cannot be used with older versions of the AQ2201/AQ2202 software. Refer to the table below
for version requirements.
If your AQ2201/AQ2202 requires a newer version of the software, download from our website.
To determine the software version, press the SYSTEM key and then the “Information”. The version number is
displayed under “Soft Version” in the Overview screen.
Model Module Name/Application Name
810518901 AQ2200-111 DFB-LD Module 2.0 and later
810518902 AQ2200-141 FP-LD Module 2.0 and later
810518903 AQ2200-142 DUAL FP-LD Module 2.0 and later
810518904 AQ2200-136 TLS Module 2.0 and later
810518905 AQ2200-201 Interface Module 2.0 and later
810518906 AQ2200-231 Optical Sensor Head (Long-Wavelength Sensor) 2.0 and later
810518907 AQ2200-241 Optical Sensor Head (Short-Wavelength Sensor) 2.0 and later
810518908 AQ2200-211 Sensor Module (High-Sensitivity Sensor) 2.0 and later
735122 AQ2200-221 Sensor Module (Dual) 5.0 and later
735125 AQ2200-215 Sensor Module (High Power Sensor) 6.0 and later
735185 AQ2200-271 ORL Module 8.01 and later
810518915 AQ2200-311 ATTN Module 4.0 and later
735131 AQ2200-311A ATTN Module 8.01 and later
735133 AQ2200-331 ATTN Module (Built-in Monitor Power Meter) 5.0 and later
735141 AQ2200-411 OSW Module 5.0 and later
735142 AQ2200-421 OSW Module (Dual) 5.0 and later
735143 AQ2200-412 OSW Module (1 × 16) 7.0 and later
810518801 AQ2200-601 BERT Module 3.0 and later
810518802 AQ2200-621 10 Gbit/s Optical Modulator (Wavelength 1.55 μm) 4.0 and later
810518804 AQ2200-622 10 Gbit/s Optical Modulator (Wavelength 1.31 μm) 4.0 and later
810518803 AQ2200-631 10 Gbit/s Optical Receiver 4.0 and later
735161 AQ2200-641 XFP Interface Module 7.0 and later
AQ2201/AQ2202 Version
(Soft Version)
6/10 IM 810518901-04E
Checking the Contents of the Package
If some of the contents are not correct or missing or if there is physical damage, contact the dealer from which
you purchased them. Also, check that the model and suffix code on the name plate on the side panel of the
module match those of your order.
AQ2200-111 DFB-LD Module (
MODEL
810518901)
Item Suffix Code Description
Wavelength -Mxxxx See the list of supported
wavelengths below.
-W1310 1310 nm
-W1490 1490 nm
Optical connector -FCA FC/Angled PC connector
Optical output
level
-P10 10 mW optical output
-P20 20 mW optical output
Optical fiber -SMF SM fiber
-PMF PM fiber
External
modulation
-MODN No external modulation
-MODS External modulation (sine)
-MODC External modulation (chop)
• DFB-LD Module Applicable Wavelengths
UNIT Optical Frequency: THz, Wavelength: nm
Suffix
Code
M0290 191.60 1564.679 M0145 193.85 1546.518
M0275 191.65 1564.271 M0160 193.90 1546.119
M0270 191.70 1563.863 M0165 193.95 1545.720
M0255 191.75 1563.455 M0180 194.00 1545.322
M0250 191.80 1563.047 M0185 194.05 1544.924
M0235 191.85 1562.640 M0200 194.10 1544.526
M0230 191.90 1562.233 M0205 194.15 1544.128
M0215 191.95 1561.826 M0220 194.20 1543.730
M0210 192.00 1561.419 M0225 194.25 1543.333
M0195 192.05 1561.013 M0240 194.30 1542.936
M0190 192.10 1560.606 M0245 194.35 1542.539
M0175 192.15 1560.200 M0260 194.40 1542.142
M0170 192.20 1559.794 M0265 194.45 1541.746
M0155 192.25 1559.389 M0280 194.50 1541.349
M0150 192.30 1558.983 M0285 194.55 1540.953
M0135 192.35 1558.578 M0300 194.60 1540.557
M0130 192.40 1558.173 M0305 194.65 1540.162
M0115 192.45 1557.768 M0320 194.70 1539.766
M0110 192.50 1557.363 M0325 194.75 1539.371
M0095 192.55 1556.959 M0340 194.80 1538.976
M0090 192.60 1556.555 M0345 194.85 1538.581
M0075 192.65 1556.151 M0360 194.90 1538.186
M0070 192.70 1555.747 M0365 194.95 1537.792
M0055 192.75 1555.343 M0380 195.00 1537.397
M0050 192.80 1554.940 M0385 195.05 1537.003
M0035 192.85 1554.537 M0400 195.10 1536.609
M0030 192.90 1554.134 M0405 195.15 1536.216
M0015 192.95 1553.731 M0420 195.20 1535.822
M0010 193.00 1553.329 M0425 195.25 1535.429
M0005 193.05 1552.926 M0440 195.30 1535.036
M0000 193.10 1552.524 M0445 195.35 1534.643
M000H 193.15 1552.122 M0460 195.40 1534.250
M0020 193.20 1551.721 M0465 195.45 1533.858
M0025 193.25 1551.319 M0480 195.50 1533.465
M0040 193.30 1550.918 M0485 195.55 1533.073
M0045 193.35 1550.517 M0500 195.60 1532.681
M0060 193.40 1550.116 M0505 195.65 1532.290
M0065 193.45 1549.715 M0520 195.70 1531.898
M0080 193.50 1549.315 M0525 195.75 1531.507
M0085 193.55 1548.915 M0540 195.80 1531.116
M0100 193.60 1548.515 M0545 195.85 1530.725
M0105 193.65 1548.115 M0560 195.90 1530.334
M0120 193.70 1547.715 W1310 228.85 1310.000
M0125 193.75 1547.316 W1490 201.203 1490.000
M0140 193.80 1546.917
Optical
Frequency
Wavelength
Suffix
Code
Optical
Frequency
Wavelength
• Accessories (*: Already attached to the module)
Name Q’ty Notes
*
Protection cap
Protection cap
1 Green
*
1 White (for use with the external
modulation option)
User’s manual 1 This manual
AQ2200-141 FP-LD Module (
AQ2200-142 DUAL FP-LD Module (
MODEL
810518902),
MODEL
810518903)
Item Suffix Code Description
Wavelength -W1310 1310 nm (Model 810518902)
-W1550 1550 nm (Model 810518902)
-W135D 1310/1350 nm (Model 810518903)
Optical
connector
/FCC AQ9441 (FC) universal adapter
/SCC AQ9441 (SC) universal adapter
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
*
1
User’s manual 1 This manual
AQ2200-131 Grid TLS Module (
MODEL
AQ2200131)
Item Suffix Code Description
Wavelength -C C-Band
-L L-Band
LD type -T4 Standard type
-T2 Advanced type (Fine tuning)
-T6 Advanced type (Fine tuning)
Optical fiber -PA PM fiber
Optical connector -FCC FC/PC connector
-FCA FC/Angled PC connector
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
*
1
User’s manual 1 This manual
AQ2200-132 Grid TLS Module (
MODEL
AQ2200132)
Item Suffix Code Description
Wavelength -CC CH1: C-Band, CH2: C-Band
-LL CH1: L-Band, CH2: L-Band
-CL CH1: C-Band, CH2: L-Band
LD type -T4 Standard type
-T2 Advanced type (Fine tuning)
-T6 Advanced type (Fine tuning)
Optical fiber -PA PM fiber
Optical
connector
-FCC FC/PC connector
-FCA FC/Angled PC connector
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
*
2
User’s manual 1 This manual
7/10IM 810518901-04E
AQ2200-136 TLS Module (
Item Suffix Code Description
Optical connector -FCA FC/Angled PC connector
Optical fiber -SMF SM fiber
Wavelength -WLSTD 1440 to 1640 nm
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap (small)
Protection cap (large)
User’s manual 1 This manual
*
*
AQ2200-201 Interface Module (
• Accessories
Name Q’ty Notes
Analog out plug 1
Optical sensor head connector cable 1
User’s manual 1 This manual
AQ2200-202 Interface Module (
• Accessories
Name Q’ty Notes
User’s manual 1 This manual
AQ2200-231 Optical Sensor Head (
AQ2200-241 Optical Sensor Head (
Item Suffix Code Description
Connector
adapter
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
*
Ring
User’s manual 1 This manual
/FCC AQ9355C (FC) connector
/SCC AQ9335C (SC) connector
/STC AQ9335C (ST) connector
*
MODEL
810518904)
2 Green
1
MODEL
810518905)
MODEL
810518905)
MODEL
810518906),
MODEL
810518907)
adapter with a light shielding cap
adapter with a light shielding cap
adapter with a light shielding cap
1
1
AQ2200-211 Sensor Module (
Item Suffix Code Description
Connector
adapter
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
Analog out plug 1
User’s manual 1 This manual
/FCC AQ9447 (FC) connector adapter
/SCC AQ9447 (SC) connector adapter
/STC AQ9447 (ST) connector adapter
*
1
AQ2200-215 Sensor Module (
AQ2200-221 Sensor Module (
Item Suffix Code Description
Connector
adapter
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Ring
Protective cover
User’s manual 1 This manual
-NON No connector adapter
-FCC AQ9335C (FC) connector adapter
-SCC AQ9335C (SC) connector adapter
-STC AQ9335C (ST) connector adapter
-LCC AQ9335C (LC) connector adapter
-MUC AQ9335C (MU) connector adapter
*
1 Model 735125
2 Model 735122
*
1 Model 735125
2 Model 735122
AQ2200-271 ORL Module (
Item Suffix Code Description
Optical fiber -SA SMF (10/125)
MODEL
810518908)
with a light shielding cap
with a light shielding cap
with a light shielding cap
MODEL
735125),
MODEL
735122)
with a light shielding cap
with a light shield cap
with a light shielding cap
with a dust protection cap
with a dust protection cap
MODEL
735185)
AQ2200-232 Optical Sensor Head (
AQ2200-242 Optical Sensor Head (
Item Suffix Code Description
Connection
cable
Connector
adapter
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
*
Ring
Connection cable (1 m, A6318WL) 1 Only for -L1
Connection cable (4 m, A6319WL) 1 Only for -L4
User’s manual 1 This manual
-L1 Length: 1 m
-L4 Length: 4 m
/FCC AQ9355C (FC) connector
adapter with a light shielding cap
/SCC AQ9335C (SC) connector
adapter with a light shielding cap
/LCC AQ9335C (LC) connector adapter
with a dust protection cap
/MUC AQ9335C (MU) connector adapter
with a dust protection cap
*
MODEL
MODEL
1
1
AQ2200232),
AQ2200242)
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
AQ2200-311 ATTN Module (
Item Suffix Code Description
Optical connector -FCC FC/PC connector
Monitor port /MON Monitor port included
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
*
*
3
MODEL
810518915)
-SCC SC/PC connector
-FCA FC/Angled PC connector
-SCA SC/Angled PC connector
2
3 Monitor port included
8/10 IM 810518901-04E
AQ2200-311A ATTN Module (
AQ2200-312 ATTN Module (
Item Suffix Code Description
Optical fiber -SA SMF
-G5 MMF (GI 50/125)
-G6 MMF (GI 62.5/125)
Optical connector -FCC FC/PC connector
-SCC SC/PC connector
Monitor port /MON Monitor port included
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
*
2
3 Monitor port included
AQ2200-331 ATTN Module (
AQ2200-332 ATTN Module (
Item Suffix Code Description
Optical fiber -SA SMF
-G5 MMF (GI 50/125)
-G6 MMF (GI 62.5/125)
Optical connector -FCC FC/PC connector
-SCC SC/PC connector
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
*
2
MODEL
MODEL
MODEL
MODEL
735131),
AQ2200312)
735133),
AQ2200332),
AQ2200-412 OSW Module (
Item Suffix Code Description
Port configuration -16 1 × 16 type
Optical fiber -SA SMF
-G5 MMF (GI 50/125)
Optical connector -FCC FC/PC connector
-SCC SC/PC connector
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
*
AQ2200-421 OSW Module (
Item Suffix Code Description
Port configuration -21 1 × 2 type
-22 2 × 2 type
Optical fiber -SA SMF
-G5 MMF (GI 50/125)
-G6 MMF (GI 62.5/125)
Optical connector -FCC FC/PC connector
-SCC SC/PC connector
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
*
MODEL
735143)
17
MODEL
735142)
6 1 × 2 type
8 2 × 2 type
AQ2200-342 ATTN Module (
Item Suffix Code Description
Optical fiber -SA SMF
Optical connector -FCC FC/PC connector
-SCA FC/Angled PC connector
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
*
4
AQ2200-411 OSW Module (
Item Suffix Code Description
Port configuration -04 1 × 4 type
-08 1 × 8 type
Optical fiber -SA SMF
-G5 MMF (GI 50/125)
-G6 MMF (GI 62.5/125)
Optical connector -FCC FC/PC connector
-SCC SC/PC connector
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
User’s manual 1 This manual
*
5 1 × 4 type
9 1 × 8 type
MODEL
MODEL
AQ2200342)
735141)
5
6
MODEL
810518801)
AQ2200-601 10 Gbit/s BERT Module (
Item Suffix Code Description
Option /M 64 Mbit-program pattern option.
Win PC software for creation of
pattern and CF memory are included.
/P1 SDH/SONET frame pattern option.
Win PC software for create of pattern.
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
Terminator for circuit protection
User’s manual 1 This manual
*
*
AQ2200-621 10 Gbit/s Optical Modulator
(
MODEL
810518802),
AQ2200-622 10 Gbit/s Optical Modulator
(
Item Suffix Code Description
Crystal orientation
of the LN modulator
Optical connector -S SC connector
Cable /P PMF (FC-SC) for 1.5 µm
-A X-cut
-B Z-cut
-F FC connector
/U U-link coaxial cable
MODEL
810518804)
(Model 810518802)
PMF (FC-SC) for 1.3 µm
(Model 810518804)
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
Terminator for circuit protection
User’s manual 1 This manual
*
2
*
1
9/10IM 810518901-04E
AQ2200-631 10 Gbit/s Optical Receiver
(
Item Suffix Code Description
Optical connector -S SC connector
-F FC connector
Cable /U U-link coaxial cable
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
Terminator for circuit protection
User’s manual 1 This manual
*
*
MODEL
1
1
810518803)
AQ2200-641 XFP Interface Module (
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
Terminator for circuit protection
User’s manual 1 This manual
*
*
AQ2200-642 Transceiver I/F Module (
• Accessory
Name Q’ty Notes
User’s manual 1 This manual
AQ2200-651 SG Module (
• Accessories (*: Already attached to the module)
Name Q’ty Notes
Protection cap
Terminator for circuit protection
User’s manual 1 This manual
*
MODEL
*
MODEL
3
2
735163)
1
6
MODEL
735161)
735162)
10/10 IM 810518901-04E
Loading...