Yaskawa SGMBH Operation Diagram

400V Large Capacity Sigma II Servo System

Selecting Your SGMBH Sigma Servo System

First, select the Sigma servomotor suited for your application using SigmaSize: the Yaskawa servomotor sizing software, available at no charge. (Request SigmaSize software via e-mail, at: literature@yaskawa.com). Use the diagram below to locate and identify the components of your system. Each item is letter-coded and cross-referenced in the option tables on the following pages.

System Configuration

Digital Operator (E)

SGMBH

Servomotor

SGMBH

For Monitor (D)

3CN

Peripheral Signal Connector (D)

1CN

I/O Signal Connector

(D)

SGDH

Amplifier

(B)

Connector for Encoder Signal (D)

2CN

Specify a technical manual, if it is needed, on your servo system purchase order: Sigma Series SGMBH/SGDH User’s Manual: SIEZ-SXX(Manual is provided at no charge with a purchase order,

Regenerative Unit (E) (Required)

Dynamic Brake (Optional)

but it must be requested).

Model Number Designation

5CN

Fan Cable

Encoder Cable (C)

Shaft Keyway

SGMBH

Servomotor

(A)

Shaft Seal

Encoder side Connector (D)

Sigma Servomotor Type

SGMBH

Rated Output

2B: 22.0kW (30hp) 3Z: 30.0kW (40hp) 3G: 37.0kW (50hp) 4E: 45.0kW (60hp) 5E: 55.0kW (74hp)

Power Supply

D: 400 VAC Series

Encoder Specifications

C: 17-Bit Incremental Encoder 2: 17-Bit Absolute Encoder

158

SGMBH - 2B D C A 6 1

Accessories

1: None C: 24V

S: Shaft Seal E: Brake and Shaft Seal

Specifications

6: Flange, straight shaft with key

L: Foot mount, straight shaft with

Design

A: Standard (Revision)

Brake (22+30 Kw Only)

and tap (Up to 45kW)

key and tap (55kW only)