Yamaha YHT-34, DV-C6280 Owner’s Manual

_YAMAHA .....................
OWNER'S MANUAL
1
2
3 4
5 6
7
Explanation of Graphical Symbols
The 5ghtnlng flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of I)r=lnsulated "dangerous voltage" within the product's er}cIosure that may be of sufficient magndude to co_stLtute a r_k ot electric shock to persons
]-he exclamation point within an equilateral
triangle is intended to alert you to the presence of important operating and maintenance
(_erviclng) instructions in the hte='ature
accompanying the appliance
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCKI-DO NOT EXPOSE THIS UNIT TO RAIN OR 11
MOISTURE
8
g
10
"t2 Use only with the cart, stand, tripod, A
Read these instruchons
Keep these mstruct=ons Heed all warnings
Follow all instructions
Do not use this apparatus near water
Clean only with dry cloth
Do not block any venblatlon openings Install in accor- dance with the manufacturer's instructions
Do not install near any heat sources such as radtators, heat registers, stoves, or other spparalus (including
amphhers) that produce heat
Do not defeat the safety purpose of the polanzed or
grounding-type plug A polanzed plug has two blades w=th
one wider than the other A grounding type p_ug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the
provided plug does not fit into your outlet, consult an
electnclan for replacement of the obsolete outlet Protect the power cord from being walked on or pinched
parbcularly at plugs, convenience receptacles and the pol_twhere theyex_ fron_ the apparatus
Only use attachments/accessones speohed by the manufacturer
bracket or table speohed by the manufac-
turer, or sold with the apparatus When a cart _sused, use caution when moving the
cardapparatus combination to avoid injury from t=p*over
13 Unplug this apparatus during lightning storms or when
unused for tong penods of ttme
14 Refer all servicing to qual=hed serv=eepersonnel
Servicing _srequired when the apparatus has been damaged m any way, such as power-supply cord or plug
_sdamaged, hqu=d has been spilled or oblects have fallen Tntothe apparatus the apparatus has been exposed to rain or moisture, does not operate normally or has been
dropped
CAUTfON
FCC INFORMATION (for US customers only)
1 IMPORTANT NOTICE : DO NOT MODIFY THIS UNIT!
Tills product, when installed as indicated in the mstructtons contamod m th=smanual, meets FCC
requirements. Modff=cat=onsnot expressly approved by Yamaha may void your author=F],granted by the FCC,
to use the product
2 IMPORTANT : When connecting this product to
eccessenes and/or another product use only h=gh qualdy shtelded cables Cable/s supphed with this
product MUST be used. Follow all mstallatton instruc- lions FaLlure to follow mctrucbons could vo=dyour FCC
authonzabon to use th=sproduct m the USA NOTE : This product has been tested and found to comply with the requirements hsted m FCC Regula-
tions, Part 15 for Class "B" digital devines. Comphance wdh those requirements prov=dosa reasenabte level of
assurance that your use of th=sproduct m a res=denfial enwronment writ not result m harmful mtaderence wdh other electromc devices
This equipment generates/uses rad=ofrequencies and, d not tnstalled and used eccordmg to the mstroctions
found m the users manual, may cause interference harmful to the operabon of other electrontc dev=ces
Compliance with FCC regulations does not guarantee that interference w111not occur =nall mstallabons. If
th=sproduct is found to be the source of interference, wh=chcan be determined by fuming the unit "OFF" and "ON", please try to eliminate the problem by using
one of the follow=ngmeasures.
Relocate e=ther this product or the dewce that is being
affected by the interference. Utd;ze power outlets that are on different branch
(c=multbreaker or fuse) cimuits or install AC tree filter/ S
In the case of radio or TV mtederence, relocate/ reonent the antenna If the antenna lead-in Is 300
ohm nbbon lead, change the lead-in to coaxial type
cable If these correctwe measures do not produce set_sfec-
tory results, please contact the local retader autho- nzed to distnbute this type of product. If you can not
locate the appropnate retader, please contact Yamaha
Electronics Corp, U.S A 6660 Orangethorpe Ave,
Buena park, CA 90620. The above statements apply ONLY to those products
distnbuted by Yamaha Corporation of Amenca or its
subs=d=anes.
We WantYou Listening For A Lifetime
YAMAHA and the Electronic Industnes Association's Consumer Electron=ca Group want you to get the most out of
your equipment by playing it at a safe level. One that lets the sound come through loud and clear wdhout annoying blanng
or distortion - and, most =mportantly, without affecting your sensltlve hearing
IMPORTANT Please record the senal number of this unit in the space
below
MODEL:
Senal No The senal number is located on the rear of the umt
Retain this Owner's Manual _na safe place for future reference
WARNING TO REDUCE TRE RISK OF FiRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THiS UNIT TO RAIN OR MOISTURE
Since heanng damage from loud sounds isoften undetectable untd it is ton bate, YAMAHA and the
ElectronLc Industnes Assoc=atron'sConsumer
Electromcs Group recommend you to avid
prolonged exposure from excesswe volume
levels
CAUTION
g
To assure the finest performance, please read this manual carefully. Keep it in a safe place for future
reference
Install this unit in a well ventilated, cool, dry, and clean place with at least 5 cm above, behind and on the both sides of this unit - away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold. Position this unit away from other electrical appliances.
motors and transformers to avoid humming sounds, do not place this unit where it may get exposed to rain or any kind of liquid to prevent fire or electrical shock.
4 Avoid extreme temperature swings or excessive use of
humidifier in the room where this unit is installed to prevent condensation inside this unit, which may cause an eleetdcal shock, fire damage to this unit, and/or
personal injury.
5 Do not cover this unit with a newspaper, a tablecloth, a
curtain, etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire.
damage to this unit and/or personal injury. Avoid installing this unit in a place where foreign objects
and liquid might fall. It might cause a fire, damage to this unit and/or personal injury. Do not place the following
objects on this unit:
Other components, as they may cause damage and/or discoloration on the surface of this unit.
Burning objects (i,e., candles), as they may cause fire, damage to this unit and/or personal injury.
Containers with liquid in them, as they may cause an
electrical shock to the user and/or damage to this unit.
7 Do not operate this unit upside-down. It may overheat.
possibly causing damage,
6 Do not use force on switches, controls or connection
cables. Never pull the cables when disconnecting them.
6 Only voltage specified on this unit must be used. Using
this unit with a higher voltage than specified is dangerous and may result in fire or other accidents. YAMAHA will not be held responsible for any damage resulting from the use of this unit with a voltage other than that specified
16 Do not attempt to clean this unit with chemical solvents:
this might damage the finish Use a clean, dry cloth
11 Disconnect the power cord from the wall outlet when not
planning to use this unit for a long period of time, or during an electrical storm, as they may cause damage by lightning
12 Do not attempt to modify or fix this unit. Contact the
qualified YAMAHA service personnel when any service is
needed Cabinet should never be opened for any reasons
13 Be sure to read TROUBLESHOOTING' section
regarding common operating errors before conciuduTg
that this unit is fautty
DANGER
Visible laser radiation when open. Avoid direct exposure to beam
When this unit is plugged to the wall outlet, do not place your eyes close to the opening of the disc lray and other openings to look into inside.
Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.
This unit is designed for home use only. Do not use this unit for business purposes.
Be sure to place this unit on a level surface. If not so, this unit will fail to work normally at the PLAYXCHANGE
operation and cause damage to the disc(s) and this unit itself. Caution for moving this unit
When moving this unit, first remove all discs from the disc table and close the table by pressing the OPEN/CLOSE
button, and then switch off the power after you confirm that the front panel display indicates as follows.
_2345
L.; (...._' L._ L.i ' L.; L..!
Never switch off the power if the front panel display is not pictured as above, otherwise the unit will break down
during mowng because the internal mechanism is not
locked.
When moving this unit, be sure to first disconnect the power cord from the AC outlet and disconnect all cords
connecting this unit to other equipment.
Voltage selector [General model]
The voltage selector on the rear panel of this unit must be set far your local main voltage BEFORE plugging into the AC power supply Voltages are 110/120/220/240 V AC, 50/60 Hz
FOR CANADIAN CUSTOMERS
Yoprevent electric shock, match wide blade of plug to
wide slot and fully insert This Class B digital apparatus complies with Canadian ICES-003
CAUTION
5-Dl',c -\utu t.h,mger tor playing DVD Video. audio CD and Video CD PL_'I X( H&NGE DI,_. Changing Capabtla_,, _hile
playing another
I OPq ICAL and I CO 3_X[ a,L Dtgual Outputs hw Dolby Dlgaal DTS MPEG and Linear PCM
96 Idlz 24 Bn &udul DNC ior high <,ound quahty
Compatible with ahnost all features of DVD discs (Multi-angle. Mulu-language. parental control, etc I
Easy Oper,tuon through On acreen Menu tGraphlcal U_er Interlace)
Muhl-speed Playback Cap,tbthty
Component Video [U S -\, Canada, Austraha and General models] S-Video Output,, lor high picture quahty
IIirili[ilillIlti[lll I
FEATURES .................................................... 1
GETTING STARTED ................................... 2
Checking the Package Contents 2 Disc Information 2
CONTROLS AND FUNCTIONS ................. 4
Front Panel/Remote Control a.
Display 6
REMOTE CONTROL .................................. 7
lnstalhng Batteries m the Remote Control 7
Battery Replacement 7
Using the Remote Control 7
CONNECTIONS ........................................... 8
Notes about Audio Connections 8 Digital Termulals 9
_knalog Terminals 9
Video Tentunals 10
Remote Control m/out Temunals
[U S A and Canada models] .. l I
BASIC OPERATION .................................. 12
Befbre Starting Playback 12 Pl,l) tng a Disc 13
'qc,trch {to advance or re_ cr,,c playback
rapidly) 14
Skipping Chaptel_ /Track', 14
Still Picture (to pause playba,-k I 15 t ramc .Advance /Reverr, e 15
Slow-Motion Play 15
SELECTING PLAY MODES ..................... 16
Repeat Play 16
B Repeat 17
Rdtldoul Sctlt.lCllcC Play I\CDI [CDI 17
Pr_lgidm Pla3 IVCDI ICDI IS
ADVANCED FEATURES ........................... 19
Menu Screen [DVD] 19
Playback Control [VCD] 19 Switching Audio Tracks [DVD] [VCD]... 20
Switching Subtitle Tracks [DVD] 2l
Switching Camera Angles 21
ON-SCREEN MENU .................................. 22
Operating On-Screen Menu 22
Disc Information Screen 23 Player's Information Screen 24
Shuttle Screen 24
SETUP MENU
SETUP MENU ............................................. 25
Operating the Setup Menu . 25
DESCRIPTION OF EACH ITEM ............. 26
1 Dlac Language [DVD] 26 2 Ratuigs [DVD] . 27
3 Menu Language 28
4 On-Screen Massages 28
5 FL Display 28 6 TV Aspect 28 7 Digital Audm Output 29 9 Other Settings 30
rlrl[
DIGITAL
M iIIlll,tt hLrt,! tllldLr l,_va,L Ir,,lll [ k,ll_,
I ,11 _ r ,r, rl_. I)L_I_ Ph_ [ ,,_, .rid Ill_
d ,lll I_ I) ._ hLh,,I ar_ Ir ,Lt_ in ,r_ _ _,1 I I, ,Ih,
I ,b,.,,IE,riL. ( ,qili_lvnli il Irnpuh[l_h_,l \%,,rF.
i_l p_ i,j,p _ I )_llh_ [ ,b_ r LI rl_ li,_ \l!
t_
m
,-I
C
"1o
!€
m €,
C
I
1
CheckingthePackageContents
( h_2L k Ihdt the I_ _114I_ I El_ I t _.'[I ! 4 dl e LnL I tld_d In _ _ ltlr pd_. kd_e
Remote COntrol
C::_ C::_ C::3 _ C:l C21 C:::::lC:::::li'zrl _ c_ C:::::l
C::3 C::l E:::I
C3 C2_
,_yXa_IA
Batteries (AA, R06, UM-3)
RCA pin cable (audio/video)
DiscInformation
[ hi, DVD dl,ntgel z, dc,lgned h,E use t_lth tol]o_ mg type, oL d[s_. only Neter attempt to load any other type of dl,,c into this
tlllll bevatl._ it 1lid V zld[tld_e thP. LIJII[
] _ pu , ,! ,h -u DVD Video Midm CD
N LIII dl',Lt ! 2 um dI',L N LIIL dhu/[ 2 Clt) dl%k
_.Idl_ pllrl;u'J ,_ll Th,. III.k
I_ oIGrrAl= _Ul:l_O
Notes
The, uml i, h,,I _,,n, I,mbl• ,_lh _ L)-R ( D R\\ Pholo _1) ( It R()M D',. D \u,h,_ I)\ I)-ROM DVD Ro\M N\'CD ( D\ ut_
1)1 I II*ll tln_ J[l', [hP[L qdllddtd _[ldP_ut dl_u_ I Il_drt clu I
[)_, nol h_,. dl_L _1 1Ill I _pu "U.=I. _11 p,,.le on I_ dd(Ihl_L IO lliu LIIII[ IIkL_ IU_tlll
[Ol•pl,_dLruu I)1% ,ot=hd I[l_llLuL•'_dl_ (l_Lf)nllLLIdl)[_L_l_d¢_l {OIhl,_lllll!
_O[t_U D". [ ) ITId "_r_ D lualUlu• d,_ _Lil_od iii thl_ Illdlltt.LI II_.l _, rll ,r by d' ,llla_le or mdy operatu m a dltf_rent _ a_ be_au,u thu\ ,u_ _ubleut to
Video CD
rll dl_,./I 2 ,-Ill dl',u
VIDEOCDLo'crr_=o_ol
Example
appwll_ _huh yntl pr_•_ thu •kip bu[IOlD, hi IhOIL It, [hL II_KI _•lr,,rl
2
Region management information
This DVD player ts deszgned to meet DVD standard that supports region, managemem system- Check the regional _mde number marked on the disc packages. If the number does not match flus umt's region number (see the below table or the back
of tins unit), flus umt refuses to play that thsc
Model Region number of this umt I_scs can be played
rS A and Canada models
the region number "l'
Europe and U K models
General model
I @ @,@o:::::::::oo
Australta model
Notes about handling discs
Hold discs by touchtag only the edges or center bole
When a disc ts not currently being loaded on the disc tray, store tt in an appropriate ease
Playback of discs ts generally not affected by small partlcle_ of dust or fingerpnnts on thetr playing surface E:ven so, they should be kept clean Wtpe by using a
clean, dry cloth Do not wzpe wtth a ctrcular mouon,
wipe strmght outward from the center
_. _ or a mark wluch mc,udes
_,_ oramarkwhtchmcludes
Do not try to clean the dzsc's surface by using any type of disc cleaner, record spray, anla-stattc spray or hqmd, or any other chemical-based hqmd, because such substances might Irreparably damage the disc's surface
Do not expose discs to direct sulfllght, high temperature or high hurmdity for a long petaod of trine, becanse these aught warp or otherwise damage the disc
the regton number '2"
the regton number "4'.
Not
3
g
Front Panel
Remote Control
-O @
l i:r:_''""::----"i - ]lrle e e-o-%[ O_
0 POWER (p.13)
Press to turn the power on and oft.
O Disc tray (0.13)
Up to 5 discs can be loaded on this tray.
O open/close(OPEN/CLOSE) (0.13)
Press to open and close the disc tray.
O Display panel
See p.6.
EZI C:_3 CZ3
_YAMAHA
DISC (1,2,3,4,5) (p.13)
Press to play the disc loaded On the guide of the correspond- ing number.
O <_,E_> (SEARCH) (0.14)
Use to advance or reverse playback rapidly.
0 _,_ (SKIP) (p.14)
_: Press to skip to the beginning of the next chapter
(track).
_-_: Press to skip to the beginning of the currently played
chapter (track).
O L>(PLAY) (p.13)
Press to st_Lrt playback,
O u_(PAUSE) (0.15)
Press to pause.
_) [] (STOP) (p.13)
Press to stop playback.
_) PLAYXCHANGE (p.14)
Press to ,._pen and clo_;e the disc tray thLring playback. You can exchange discs other than the one being played.
4
REPEAT (p.16)
Press to repeat playback of a tide, chapter, wacL etc.
® A-B(p.l
Press to specify two points and to repeat playback between
them.
® Numeric buttons
Use to select a rifle, chapter, track, etc.
® ANGLE
Press to change angles when the scene of the disc being played contains two or more angles.
® Cursor buttons, ENTER
Use to select and determine an item on menu screen,etc.
® AUDIO (p.20)
Press to change audio track language and/or format when
the disc being played contains two or more different audio
tracks.
® TOP MENU
Press to go to the initial screen when operating in the menu
SCl_en.
® SETUP (p.25)
Press to call up SETUP MENUscreen.
® DISC SKIP
Press to select another disc.
® PLAY MODE (p.17, 18)
Press to switch among random play, program play, and
normal play.
® RETURN (p.25)
Press to go back to the previous screen when operating in
the m_nu _n.
® SUBTITLE (p.21)
Press to change subtitles when the disc being played contains several subtitles.
MENU (p.19)
Press to call up menu screen contained in the disc.
® ON SCREEN (p.22)
Press to turn the on-screen menu (GUI icons) on and off on
the video monitor.
0 CANCEL
Press to cancel a specific mode or a setting.
5
iKoh, lllpl_'f,v,,m_l_lh, t_ltwh, r
Oisplay
DVD
VCD
9
.,::. .:.o:,I:;_!f--_f:i-((:-_ii:.ii(i:-g,L!):-ii_i-.-_i!fi{i_i-
0 VCD
VCD hghl, up _hen a Video CD u, _elected and CD hght, up _ hell a ( D p, _,€[ct.ted
O DVD
Lught. up '._h,_n a D\ D L',,elet.ted
O RNDM
Light, up during randonl ',equence pla)
O PROG
Llght_ up during progt am pla_
ANGLE
Light-. up when the ,_ene _-LIITelI[[_, pl,t_,ed _Oll[al[l_dl[l_/_[l[
,fflg[¢l _,F
Repeat mode indicator
T and REP light tip _Omn lepeaung a utle or a ua_-k ( _md REP hght up _hen repeating a _.h,tptet
REP and _,-B hght up when repeating bel_een Ih_ tx_, pozl/l'.. },Ill haxe _peclhed
REP arid DISC I hght up _hen repeating the _ut]cIlI[_ ,ele_ted dus_
REP ,uld DISC "_hghl tip when lepeJtmg all tile d!'L%
h_aLled,m the d],t_ ira 3
0 MPEG LDVDi
L_ght_ up when an audio track encoded w=th MPEG lormat us .elected
PCM ,DVD_
L_ght,, up when an audm track encoded w_th Linear PCM ttllllldt I'. _.ele=..ted
QB Digital 10VOl
L_ght_ up when _r_ audm tra,-k encoded wnth Dolby digital
[tlllll,tt IN ,elected
® _ IOVDI
l.tghl_ up _,hen .m auduo uack eu.uded wuth DTS fonnat z', ,ele,.ted
_D[--
Lpght, up during pla3back
_LJfl
l ignt_ up _htl_ pla)ha_k _, paused
One _l the_e number, hght-, up to ,,how the _.urrently ,elected du_< _ht_h i, loaded on the grade o!Ithe _-orue-
_pll[Idlng nulnbel
® Multi-information display
_ht_w', V[tltt)tl', ln|olnlatl_lR ",LlChd'. title ch0.pter of tr;:l_.k numhe] eLtp,ed pla\ m,z tune etc
6
InstallingBatteriesin theRemoteControl
iJ Turn the remote control over and slide the
battery compartment cover in the direction of the arrow.
PJ Insert the batteries (AA, R06, UM-3 type)
according the polarity markings on the inside of the battery compartment,
I_J Close the battery compartment cover.
If the remote control operates only when it is dose to the unit, the batteries are weak. Replace all the batteries with ne_ ones.
Notes
Use ulfl? Aa.. R06 ol riM-:; buncticx Ik)ttcl_hlccmcnt
Bc Stile tilL" hilltcly [It_lillily i'+ t:OtlCt:l. (_' IlK" iIluMlaliI>fl illMdc lht' b_ltlcl_ t:Oll]pillllll_llt )
R_lllO_+t2 lhL" b_l{tt2tit2'_ i! thL* IL*ll]tllt" control will IlOl ht" LIM'd _(1i LIII C'_t_/IdL'LI pL'l'itId ()f {ill)L"
[I tI_Cb_tll_:llC_havek'akcd, dis_x_scot them inlmcdiatcly A_oid Iouching Ihc leaked nlalcrial or letting n orville"hno c,intact with
dolhing, mc ('[can the battciy conlpartmcnt thoroughlyF_totc installing nc_\ hancrics.
The remote control transmits a directional infrared beam. Be
sure to aim the remote control directly at the infrared sensor during operation. When the sensor is covered or there is a large object between the remote control and the ,;ensor, the sensor cannot receive signals+ The sensor may not be able to
Remote control
I
i
Within approximately 6 m 120 feet)
receive signals properly when it is exp,_sed m direct stn/ligbt or a strong artificial light (such as a lluorescent or strobe
ltgbtt. In this case, change the dilectmn of the light or
reposition the trait to awfid ditecl lighting.
Notes
Handle the IClll_)tt" corlllOl _\ ith C_LIC
l)o not spill \_atu'l. tea ot other litlttids on the tt'ln()lV ¢OJl[iill
!)t> not dlop Ih¢ Ic'l/ltltc _/Itltlt>l
" 1)o l_nt lcu\c ol _t<_i'c' the =cnltHe clmtlol ill Ihc I<dlo\_iug
T
!li_ll htlil/idir, or IL'mp_'laltltk such ;IS ilL'HI LLhcah'l. ',to\ c _u
bath:
dust_ plaice: ol
CXllU'nlcly low tu'lllpCl_ttLIIC
I!
7
['i?_rII_,]/i
Never connect this unit and other equipment to power supply until all connections have been completed ]
Bc sure all connections are made correctly, observing the color-ending of terminal,, ol both this unit and the equipment to be connected. Also lelel to the instl-uctiolt_ ot the equipntent to be cOnllected.
Remote Control in/out terminals {USA model 1(.p.11)
[U SA model
/ iI
f
!,i
'=......... \/
Video terminals ( "p12) re{" i ,
Analog terminals ("p9)
For connectin o a stereo amplifier,
etc.
Select the correct output l_3rr_mt at '7 Digital Audio Output' on the SETUP MENU in accordance with your AV system.
Equipment to be connected
I PCM Down
Convcrsioll*
AV alnplilicI with digital input(s) and Yes Bilstreanl Dolbv Digital/DTS/MPEG decoder
AV amplificl wifll digital input(s) and Yc_ Bitslrcam Bitstrcaln
i I)olby Digital/MPEG*I decoder J I'_ ithout i) I S decoder I
AV alnplificr with l)olby Piologic Yes PCM*** OIt ¸¸_¸:E¸ PCM*** lk:codcr
Stereo an_plilicr wdhout digiod input No PCM * _¸'_' ()t_ _¸_¸ PCM **¸4¸
* Select 'No" when the connected equipment has 96-kHz/24-bit D/A converter to en.ioy high-fidelity audio. Howe,.er. no
digital signal is output if the disc you play is copyright-protected.
':* No signal is output from this unit's digital audio output terminal.
'_ Multi channel signals are downmixed to 2 chalmels Linear PCM and then output lrom both digital and analog output
tetnlimtls
Connect an AV amplifier wit h built-in decoder to these
terminals to enjoy theater-like surround sound.
Appropriatc sctdngs al "7 DigilM Audio Output'
2. Dolby Digial 3 DTS Digial
_tlrrtltlnd
Bitstream
Ot'f*s
41.
To AC outlet
After completing all connections, connect
the AC power code to an AC power outlet.
4 MPEG IEulopc,
U.K and Austlalia models)
]Bitstrcam
* _CL" t "- lilt turthel J[l[OI'lll_ltiOll
8
Loading...
+ 27 hidden pages