Yamaha YFM50RW User Manual

This A
OWNER’S MANUAL MANUEL DU PROPRIÉTAIRE MANUAL DEL PROPIETARIO
YFM50RW
5YF-28199-63
YAMAHA MOTOR CO., LTD.
PRINTED IN JAPAN
(E,F,S)
This A
OWNER’S MANUAL
YFM50RW
5YF-28199-63-E0
EBU17170

INTRODUCTION

EBU17200
Congratulations on your purchase of the Yamaha YFM50RW. This ATV represents the result of many years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will provide you with a good basic understanding of the features and operation of this ATV.
This manual includes important safety information. It provides information about special tech­niques and skills necessary to ride the ATV.
dures. If you have any questions regarding the operation or maintenance of your ATV, please consult a Yamaha dealer.
AN IMPORTANT SAFETY MESSAGE:
READ THIS MANUAL COMPLETELY BEFORE OPERATING YOUR ATV. MAKE SURE YOU UNDER­STAND ALL INSTRUCTIONS.
PAY CLOSE ATTENTION TO THE WARNING AND CAUTION LABELS ON THE ATV.
THIS ATV, AND ANY OTHER ATV OVER 50 cc, SHOULD NOT BE OPERATED BY A CHILD UNDER 6 YEARS OF AGE.
AN IMPORTANT NOTE TO PARENTS:
This ATV is not a toy. Before you let your child ride this ATV, you should understand the instructions and warnings in this Owner’s Manual. Then be sure your child understands and will follow them. Children differ in skills, physical abilities and judgment. Some children may not be able to operate an ATV safely. Parents should supervise their child’s use of the ATV at all times. Parents should permit continued use only if they determine that the child has the ability to operate the ATV safely.
It also includes basic maintenance and inspection proce-
Your ATV was delivered with an adjustable speed limiter. Yamaha recommends that all beginners start off with the speed limiter screw turned in to limit the amount of speed available while they learn. The speed limiter screw may be gradually turned out to increase maximum speed as the beginner becomes more fa­miliar with operating the ATV. If your child is a beginner or is inexperienced, he or she should take a training course.
EBU17330
WARNING
CAUTION:
NOTE:

IMPORTANT MANUAL INFORMATION

EBU17341
FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS IN­JURY OR DEATH. Particularly important information is distinguished in this manual by the following notations:
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Failure to follow WARNING instructions could result in severe injury or death to the ATV operator, a bystander, or a person inspecting or repairing the ATV.
A CAUTION indicates special precautions that must be taken to avoid damage to the ATV.
A NOTE provides key information to make procedures easier or clearer.
* Product and specifications are subject to change without notice.
EBU17350

IMPORTANT NOTICE

EBU17370
Welcome to the Yamaha world of motor sports! This ATV is designed and manufactured for use on UNPAVED surfaces only. It is unsafe to operate this ATV on any paved surface, paved street, paved road or motorway. Please check your local riding laws and regulations before operating this ATV.
EBU17390
YFM50RW
OWNER’S MANUAL
©2006 by Yamaha Motor Co., Ltd.
1st edition, April 2006
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Yamaha Motor Co., Ltd. is expressly prohibited.
Printed in Japan.
EBU17420

TABLE OF CONTENTS

SAFETY INFORMATION ............................. 1-1
LOCATION OF THE WARNING AND
SPECIFICATION LABELS ............................ 2-1
DESCRIPTION .............................................. 3-1
Left view ..................................................... 3-1
Right view................................................... 3-1
Controls and instruments ........................... 3-2
INSTRUMENT AND CONTROL
FUNCTIONS ..................................................4-1
Main switch ............................................... 4-1
Indicator light ............................................. 4-1
Handlebar switches ................................... 4-2
Engine stop switch with lanyard ................ 4-2
Throttle lever ............................................. 4-4
Speed limiter ............................................. 4-5
Front brake lever ....................................... 4-6
Rear brake lever ........................................ 4-6
Parking brake ............................................ 4-6
Drive select lever ....................................... 4-7
Fuel tank cap ............................................. 4-7
Fuel ........................................................... 4-8
Fuel cock ................................................... 4-9
Choke ...................................................... 4-10
Seat ......................................................... 4-11
PRE-OPERATION CHECKS ..........................5-1
Pre-operation check list ............................. 5-1
Fuel ............................................................ 5-3
Engine oil ................................................... 5-3
Final gear oil .............................................. 5-3
Front and rear brakes ................................ 5-3
Throttle lever .............................................. 5-4
Tires ........................................................... 5-4
Measuring the tire pressure ....................... 5-5
Tire wear limit ............................................ 5-6
Chassis fasteners ...................................... 5-6
Instruments, lights and switches ................ 5-6
Battery ....................................................... 5-6
OPERATION...................................................6-1
Starting a cold engine ................................ 6-1
Starting a warm engine .............................. 6-3
Shifting ....................................................... 6-3
Engine break-in .......................................... 6-5
Parking ....................................................... 6-5
Parking on a slope ..................................... 6-6
Accessories and loading ............................ 6-7
RIDING YOUR ATV ......................................7-1
GETTING TO KNOW YOUR ATV.............. 7-2
RIDE WITH CARE AND GOOD
JUDGEMENT ...........................................7-2
BE CAREFUL WHERE YOU RIDE............ 7-8
TURNING YOUR ATV ............................. 7-12
CLIMBING UPHILL .................................. 7-13
RIDING DOWNHILL................................. 7-16
CROSSING A SLOPE.............................. 7-17
CROSSING THROUGH SHALLOW
WATER ..................................................7-18
RIDING OVER ROUGH TERRAIN .......... 7-19
SLIDING AND SKIDDING........................ 7-20
WHAT TO DO IF... ................................... 7-21
WHAT TO DO... ....................................... 7-21
PERIODIC MAINTENANCE AND MINOR
REPAIR.......................................................... 8-1
Owner’s manual and tool kit ...................... 8-1
Periodic maintenance and lubrication
chart ........................................................ 8-3
Checking the spark plug ............................ 8-7
Engine oil .................................................. 8-8
Final gear oil ............................................ 8-11
Cleaning the air filter element ................. 8-12
Cleaning the spark arrester ..................... 8-15
Adjusting the carburetor .......................... 8-17
Adjusting the engine idling speed ........... 8-17
Checking the throttle cable free play ....... 8-18
Valve clearance ....................................... 8-18
Checking the front and rear brake
shoes .....................................................8-19
Adjusting the front brake lever free
play ........................................................8-20
Adjusting the rear brake lever free play ... 8-22
Checking and lubricating the cables ........ 8-23
Checking and lubricating the front and
rear brake levers ....................................8-24
Checking the wheel bearings ................... 8-24
Lubricating the knuckle shafts ................. 8-24
Lubricating the steering shaft ................... 8-25
Battery ..................................................... 8-25
Replacing the fuse ................................... 8-28
Removing a wheel ................................... 8-28
Installing a wheel ..................................... 8-29
Troubleshooting ....................................... 8-31
Troubleshooting chart .............................. 8-32
CLEANING AND STORAGE ..........................9-1
Cleaning ..................................................... 9-1
Storage ...................................................... 9-2
SPECIFICATIONS .......................................10-1
CONSUMER INFORMATION.......................11-1
Identification numbers .............................. 11-1
EBU17430

SAFETY INFORMATION

SAFETY INFORMATION
EBU17651
AN ATV IS NOT A TOY AND CAN BE HAZARD­OUS TO OPERATE.
from other vehicles, including motorcycles and cars. A collision or rollover can occur quickly, even during routine maneuvers such as turning and riding on hills or over obstacles, if you fail to take proper precautions. SEVERE INJURY OR DEATH can result if you do not follow these instructions:
Read this manual and all labels carefully and fol­low the operating procedures described.
Never operate an ATV without proper training or instruction.
Always follow the age recommendation: – A child under 6 years old should never operate an ATV with engine size greater than 50 cc. – A child under 12 years old should never oper­ate an ATV with engine size greater than 70 cc. – A child under 16 years old should never oper-
An ATV handles differently
ate an ATV with engine size greater than 90 cc.
Never allow a child under age 16 to operate an ATV without adult supervision, and never allow continued use of an ATV by a child if he or she does not have the abilities to operate it safely.
Never carry a passenger on an ATV.
Always avoid operating an ATV on any paved surfaces, including sidewalks, driveways, park­ing lots and paved streets.
Never operate an ATV on any paved street, paved road or motorway.
Watch carefully for other vehicles when operat­ing on unpaved public streets or roads. Make sure you know your country’s laws and regula­tions before you ride on unpaved public streets or roads.
Never operate an ATV without wearing an ap­proved motorcycle helmet that fits properly. You should also wear eye protection (goggles or face shield), gloves, boots, a long-sleeved shirt or a jacket, and long pants.
1
2
3
4
5
6
7
8
9
10
11
1-1
10
11
Never consume alcohol or drugs before or while operating this ATV.
1
Never operate at speeds too fast for your skills or the riding conditions. Always go at a speed
2
that is proper for the terrain, visibility, operating conditions, and your experience.
3
Never attempt wheelies, jumps, or other stunts.
Always inspect your ATV each time you use it to
4
make sure it is in safe operating condition. Al­ways follow the inspection and maintenance
5
procedures and schedules described in this manual.
6
Always keep both hands on the handlebars and both feet on the footrests of the ATV during op-
7
eration.
Always go slowly and be extra careful when op-
8
erating on unfamiliar terrain. Always be alert to
9
changing terrain conditions when operating the ATV.
Never operate on excessively rough, slippery or loose terrain until you have learned and prac­ticed the skills necessary to control the ATV on such terrain. Always be especially cautious on these kinds of terrain.
Always follow proper procedures for turning as described in this manual. Practice turning at low
speeds before attempting to turn at faster speeds and never turn at excessive speeds.
Never operate the ATV on hills too steep for the ATV or for your abilities. Practice on smaller hills before attempting larger hills.
Always follow proper procedures for climbing hills as described in this manual. Check the ter­rain carefully before you start up any hill. Never climb hills with excessively slippery or loose sur­faces. Shift your weight forward. Never open the throttle suddenly or make sudden gear changes. Never go over the top of a hill at high speed.
Always follow proper procedures for going down hills and for braking on hills as described in this manual. Check the terrain carefully before you start down any hill. Shift your weight backward. Never go down a hill at high speed. Avoid going down a hill at an angle that would cause the ve­hicle to lean sharply to one side. Go straight down the hill where possible.
Always follow proper procedures for crossing the side of a hill as described in this manual. Avoid hills with excessively slippery or loose sur­faces. Shift your weight to the uphill side of the ATV. Never attempt to turn the ATV around on any hill until you have mastered the turning tech-
1-2
nique described in this manual on level ground. Avoid crossing the side of a steep hill if possible.
Always use proper procedures if you stall or roll backwards when climbing a hill. If you stall or roll backwards, follow the special procedure for braking described in this manual. Dismount on the uphill side or to a side if pointed straight up­hill. Turn the ATV around and remount, following the procedure described in this manual.
Always check for obstacles before operating in a new area.
Never attempt to operate over large obstacles, such as large rocks or fallen trees. Always follow proper procedures when operating over obsta­cles as described in this manual.
Always be careful when skidding or sliding. Learn to safely control skidding or sliding by practicing at low speeds and on level, smooth terrain. On extremely slippery surfaces, such as ice, go slowly and be very cautious in order to re­duce the chance of skidding or sliding out of con­trol.
Never operate an ATV in fast flowing water or in water deeper than that recommended in this manual. Remember that wet brakes may have reduced stopping ability. Test your brakes after
leaving water. If necessary, apply them several times to let friction dry out the linings.
Always use the size and type of tires specified in this manual.
Always maintain proper tire pressure as de­scribed in this manual.
Never modify an ATV through improper installa­tion or use of accessories.
Never exceed the stated load capacity for an ATV. Cargo should be properly distributed and securely attached. Reduce speed and follow in­structions in this manual for carrying cargo or pulling a trailer. Allow greater distance for brak­ing.
TEACHING YOUR CHILD TO OPERATE THE ATV
EWB00080
WARNING
Never let your child ride an ATV without close adult supervision (a child under 6 should not ride this ATV even with adult supervision). Promptly correct your child if he or she begins to ride beyond his or her abilities and, if neces­sary, intervene by pulling the cord (lanyard) to stop the engine. If the child rides beyond his or her abilities, or
1-3
1
2
3
4
5
6
7
8
9
10
11
rides in terrain that is too difficult, he or she may lose control of the ATV, causing an acci-
1
dent. Introduce new riding areas slowly and make
2
sure the riding area matches your childs skill level.
3
You must make the commitment to your child’s proper use of the ATV. Your child must rely upon
4
you to be sure he or she has the development,
5
proper training, and proper equipment, as well as an appropriately sized ATV and an appropriate
6
riding area.
7
Be sure your child is ready to learn how to ride
As a parent, your first step is to decide when your
8
child has the strength, skills, and judgment to learn how to operate an ATV safely. Re-evaluate your
9
child’s readiness before every use; a child who is too tired or distracted should not be allowed to op-
10
erate the ATV.
11
Be sure your child is properly trained
Your child should take a certified training course. Training will continue with you as the instructor, so you should be sure you thoroughly understand proper riding techniques before continuing to in-
struct your child. Go through this Owner’s Manual page by page with your child and be sure he or she understands how to operate the ATV properly.
Be sure your child is wearing all the proper safety equipment
Your child must always wear an approved motor­cycle helmet that fits properly. Your child should also wear the safety equipment described in the Riding Your ATV section of this manual.
Choose an appropriate riding area
Select an area appropriate for your child to learn to ride. (See page 7-8.) Follow the instructions in the Riding Your ATV section of this manual. Choose a large, flat, unpaved road or area that is free of ob­stacles and away from other vehicles.
Supervise every use of the ATV
Because an adult must supervise every ATV oper­ator under age 16, you should closely watch your child every time he or she uses the ATV. Be ready to intervene immediately if the child is not operat­ing according to your guidelines. This ATV is fitted with an engine stop switch cord (lanyard) device that will let you stop the engine remotely as you walk behind the vehicle.
1-4
ENGINE STOP SWITCH CORD
This model has an engine stop switch cord (lan­yard) designed for use by an adult supervising the child operating the ATV. When using the engine stop switch cord, be sure the speed limiter on the handlebar is adjusted to limit the ATV to a walking speed. (See page 4-5.)
1. Push the clip on the end of the engine stop switch cord under the engine shut-off switch (black button).
2. Put your fingers in the loop at the other end of the cord.
3. As your child is riding, walk behind the ATV, closely watching his or her actions as well as the path ahead.
4. If there is a potential hazard ahead or if your child is not riding correctly, pull firmly on the cord (lanyard) to stop the engine. Because the ATV will continue to roll for some distance, al­low extra time and distance to pull the cord be­fore a potentially hazardous situation might be encountered.
When your child has developed sufficient skill to no longer need you to follow with the cord, the cord can be stowed under the seat of the ATV. Howev­er, you must still closely supervise your child at all
times during ATV operation.
NOTE:
The ATV will not start without the clip in place. Be sure to remove the cord and store it in a safe place to prevent operation of the ATV when you are not around to supervise.
EWB00061
WARNING
Always turn off the engine when refueling.
Do not refuel right after the engine has been running and is still very hot.
Do not spill gasoline on the engine or ex­haust pipe/muffler when refueling. Never re­fuel while smoking, or in the vicinity of sparks, open flames, or other sources of ig­nition such as the pilot lights of water heat­ers and clothes dryers. Gasoline can catch fire and you could be burned.
When transporting the ATV in another vehi­cle, be sure it is kept upright and that the fuel cock is in the OFF position. Otherwise, fuel may leak out of the carburetor or fuel tank.
Gasoline is poisonous. If you should swal­low some gasoline or inhale a lot of gasoline vapor, or get some gasoline in your eyes,
1
2
3
4
5
6
7
8
9
10
11
1-5
seek medical help immediately. If gasoline spills on your skin, wash with soap and wa-
1
ter. If gasoline spills on your clothing, change your clothes.
2
3
4
5
6
7
8
9
10
EWB00070
11
WARNING
Always operate your ATV in an area with ade­quate ventilation. Never start or run the engine in a closed area. Exhaust fumes are poisonous and may cause loss of consciousness and
death within a short time.
1-6
EBU17660

LOCATION OF THE WARNING AND SPECIFICATION LABELS

1
2
1
5
2
3
4
5
6
7
8
4 3
9
10
11
2-1
EBU17670
1
Read and understand all of the labels on your ATV. These labels contain important information for safe and proper operation.
2
Never remove any labels from your ATV. If a label becomes difficult to read or comes off, request a replace­ment label from your Yamaha dealer.
3
4
5
6
7
8
9
10
11
2-2
For Oceania For Europe For Europe
12
1
WARNING
2
UNDER
6
Operating this ATV if you are under the age of 6 increases your chance of severe injury or death.
Adult supervision required for children under age 16.
NEVER permit children under age 6 to operate this ATV.
5YF-21697-00
<
6
5YF-21697-20
YAMAHA MOTOR CO., LTD.
SHIZUOKA JAPAN
p
4GB-2155A-00
3
4
5
6
7
2-3
For EuropeFor Oceania
5FK-2151H-00
8
9
10
11
3
WARNING
NEVER ride as a
passenger.
Passengers can cause a loss of control, resulting in SEVERE INJURY or DEATH.
5FE-2151H-01
10
11
1
For Oceania
4
For Europe
2
WARNING
3
4
5
6
7
8
9
IMPROPER TIRE PRESSURE OR OVERLOADING CAN CAUSE LOSS OF CONTROL. LOSS OF CONTROL CAN RESULT IN SEVERE INJURY OR DEATH.
OPERATING TIRE PRESSURE: Set with tires cold
Recommended
9
9
Minimum
9
Never set tire pressure below minimum. It could cause the tire to dislodge from the rim.
LOADING
9
Maximum Vehicle Load Includes weight of operator, cargo and accessories.
:
FRONT REAR
:
FRONT REAR
5YF-21696-00
: 20 kPa,
: 17 kPa,
: 20 kPa,
: 17 kPa,
:
40 kg,
{
0.20
{
0.20
{
0.17
{
0.17
(88 lbs).
kgf/cm kgf/cm kgf/cm kgf/cm
2
}
2
}
2
}
2
}
2.9 psi
2.9 psi
2.5 psi
2.5 psi
20 kPa
0.20 kgf/cm
2.9 psi
GB
Set with tires cold.
D
Bei kalten Reifen.
Ajuste con los
E
neumáticos en frío.
F
Pneus à froid.
2
I
NL
P
S
20 kPa
0.20 kgf/cm
2.9 psi
Impostare a pneumatici freddi.
Wanneer de banden koud zijn.
Regular com pneus frios.
Ställ in med kalla däck.
5YF-21696-M0
2
2-4
For Oceania
5
WARNING
Improper ATV use can result in SEVERE INJURY or DEATH.
For Europe
5
1
2
3
ALWAYS USE
AN APPROVED ON PUBLIC PASSENGERS WITH DRUGS
HELMET AND ROADS PROTECTIVE
GEAR
NEVER
9
without proper training or instruction.
9
at speeds too fast for your skills or the conditions.
9
on public roads-a collision can occur with another vehicle.
9
with a passenger-passengers affect balance and steering and increase risk of losing control.
ALWAYS :
9 use proper riding techniques to avoid
vehicle overturns on hills and rough terrain and it turns.
9
avoid paved surfaces-pavement may seriously affect handling and control.
LOCATE AND READ OWNER'S MANUAL.
FOLLOW ALL INSTRUCTIONS AND WARNINGS.
NEVER USE
operate :
NEVER CARRY NEVER USE
OR ALCOHOL
5FE-21568-11
2-5
Before you operate this vehicle,
GB
read the owners manual. Lesen Sie die Bedienungsanleitung
D
bevor Sie dieses Fahrzeug fahren. Antes de conducir este vehículo,
E
lea el Manual del Propietario. Lire le manuel du propriétaire avant
F
dutiliser ce véhicule. Prima di usare il veicolo,
I
leggete il manuale di istruzioni. Voor het gebruik van dit voertuig
NL
de handleiding met aandacht lezen. Antes de utilizar este veículo,
P
leia o manual do proprietário. Innan du kör detta fordon,
S
läs handboken.
4
5
6
7
8
9
10
11
5FK-21568-00
EBU17680
1
EBU17690
Left view
2

DESCRIPTION

EBU17700
Right view
3
4
5
6
7
5
8
1. Fuel cock
2. Fuse
9
3. Engine stop switch with cord (lanyard)
4. Footboard
10
5. Drive select lever
11
1
3
2
1
4
1. Spark arrester
2. Seat
3. Footboard
3-1
2
3
EBU17712
Controls and instruments
12
8
1. Rear brake lever
2. Parking brake
3. Neutral indicator light
4. Front brake lever
5. Throttle lever
6. Main switch
7. Fuel tank cap
8. Handlebar switches
3
6
7
from the figures shown in this manual.
1
4
2
3
4
5
6
7
5
8
9
10
11
NOTE:
The ATV you have purchased may differ slightly
3-2
EBU17730

INSTRUMENT AND CONTROL FUNCTIONS

1
EBU17740
Main switch
2
The positions of the main switch are as follows:
3
ON
All electrical systems are supplied with power, and
4
the engine can be started. The key cannot be re­moved.
5
OFF
6
All electrical systems are off. The key can be re­moved.
7
EBU17780
Indicator light
1
8
9
10
11
1. Main switch
OFF ON
1. Neutral indicator light N
1
EBU17860
Neutral indicator light “”
This indicator light comes on when the transmis­sion is in the neutral position.
4-1
EBU18060
Handlebar switches
12
1. Engine stop switch “ENG. STOP”
2. Start switch “START
EBU18070
Engine stop switch ENG. STOP
Set this switch to RUN before starting the engine. The engine stop switch controls the ignition and stops the engine when it is running. Use this switch to stop the engine in an emergency situation. The engine will not start or run when this switch is set to OFF”.
EBU18090
Start switch START
Push this switch to crank the engine with the start­er.
ECB00050
CAUTION:
See the starting instructions on page 6-1 prior to starting the engine.
EBU18260
Engine stop switch with lanyard
The clip must be attached to the engine stop switch for the engine to run.
1
2
3
4
5
6
7
8
9
10
11
4-2
1
2
3
4
1
5
6
1. Engine stop switch
2. Clip
7
3. Lanyard
8
The lanyard should be held by putting your fingers in the loop as shown.
9
10
11
3
2
1
1. Lanyard
Should the ATV be separated from the parent by a distance longer than the lanyard length, the lan­yard will pull out the clip and stop the engine.
4-3
EBU18280
Throttle lever
Once the engine is running, movement of the throt­tle lever will increase the engine speed.
1
Regulate the speed of the ATV by varying the throttle position. Because the throttle is spring­loaded, the ATV will decelerate, and the engine will return to an idle any time the hand is removed from the throttle lever.
1
2
3
4
5
1. Lanyard
For further explanation of this switch and the lan­yard, see TEACHING YOUR CHILD TO OPER­ATE THE ATV in the SAFETY INFORMATION section.
NOTE:
The engine cannot be started with the clip re-
moved. When your child has developed sufficient skill to
no longer need you to follow with the lanyard, the lanyard can be stowed under the seat of the ATV. However, you must still closely supervise your child at all times during ATV operation.
1
1. Throttle lever
Before starting the engine, check the throttle to be sure it is operating smoothly. Make sure it returns to the idle position as soon as the lever is released.
4-4
6
7
8
9
10
11
EWB00250
WARNING
1
Malfunction of the throttle could make it diffi­cult to speed up or slow down when you need
2
to. This could cause an accident. Check the op­eration of the throttle lever before you start the
3
engine. If the throttle does not work smoothly, check for the cause. Correct the problem be-
4
fore riding the ATV or consult a Yamaha dealer.
5
EBU18361
Speed limiter
6
Your ATV was delivered with an adjustable speed
7
limiter. Yamaha recommends that all beginning riders start off with the speed limiter adjusting
8
screw fully turned in to limit the amount of speed available while they learn.
9
The speed limiter keeps the throttle from fully opening, even when the throttle lever is pushed to
10
the maximum. The adjusting screw may be gradu­ally turned out as the beginner becomes more fa-
11
miliar with operating the ATV.
1. Loosen the locknut.
2. To increase the maximum engine power avail­able and the maximum speed of the ATV, turn the adjusting screw in direction (a). To de-
crease the maximum engine power available and the maximum speed of the ATV, turn the adjusting screw in direction (b).
3
(b)
(a)
1
2
1. Locknut
2. Adjusting screw
3. No more than 12 mm (0.47 in)
3. Tighten the locknut.
EWB00230
WARNING
Improper adjustment of the speed limiter and throttle could cause throttle cable damage or improper throttle operation. The child could lose control, have an accident or be injured. Do not turn the adjusting screw out more than 12
4-5
mm (0.47 in) or the throttle cable could be dam­aged.
EBU18391
Front brake lever
The front brake lever is located on the right handle­bar. To apply the front brake, pull the brake lever toward the handlebar grip.
1
1
2
3
4
1
1. Front brake lever
EBU18401
Rear brake lever
The rear brake lever is located on the left handle­bar. To apply the rear brake, pull the brake lever to­ward the handlebar grip.
1. Rear brake lever
EBU18460
Parking brake
Use the parking brake before starting the engine or parking the ATV, especially on a slope. Apply the rear brake lever and push down the lock plate to apply the parking brake. Squeeze the rear brake lever to release the parking brake.
4-6
5
6
7
8
9
10
11
prematurely.
1
2
3
4
5
6
1. Parking brake lock plate
7
EWB00220
8
9
WARNING
Always set the parking brake before starting the engine. The ATV could start moving un­expectedly if the parking brake is not ap-
10
plied. This could cause loss of control or a collision.
11
Always be sure you have released the park­ing brake before you begin to ride. The brake could overheat if you ride the ATV without re­leasing the parking brake. You could lose braking performance which could cause an accident. You could also wear out the brakes
EBU18630
Drive select lever
1
The drive select lever is located on the left side of the engine. Use the drive select lever to shift the transmission into drive or neutral.
1
2
1. Drive select lever
2. Drive position
3. Neutral position
EBU18720
3
Fuel tank cap
Remove the fuel tank cap by turning it counter­clockwise.
4-7
Loading...
+ 86 hidden pages