How it Works
Yamaha
Loading...
YFM35RW
User Manual
136 pgs6.91 Mb0
User Manual [fr]
140 pgs5.21 Mb0
PARTS CATALOGUE 07
75 pgs1.99 Mb0
User Manual
146 pgs7.29 Mb0
User Manual [es]
140 pgs5.17 Mb0
User Manual [fr]
142 pgs7.25 Mb0
User Manual
132 pgs4.96 Mb0
User Manual
134 pgs6.94 Mb0
User Manual [es]
142 pgs7.2 Mb0
Table of contents
Loading...

Yamaha YFM35R-W User Manual

READ THIS MANUAL CAREFULLY!
It contains important safety information.
OWNER’S MANUAL
YFM35R-W
10P-F8199-70
Read this manual carefully before operating this vehicle. This manual should stay with this ve-
hicle if it is sold.

INTRODUCTION

Congratulations on your purchase of the Yamaha YFM35R-W. This ATV represents the result of many years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. This manual will provide you with a good basic understanding of the features and operation of this ATV.
This manual includes important safety information. It provides information about special tech­niques and skills necessary to ride the ATV. It also includes basic maintenance and inspection proce-
dures. If you have any questions regarding the operation or maintenance of your ATV, please consult a Yamaha dealer.
AN IMPORTANT SAFETY MESSAGE:
● Read this manual completely before operating your ATV. Make sure you understand all instructions.
● Pay close attention to the warning and notice labels on the ATV.
● This ATV should not be ridden by anyone under 16 years of age.
● This ATV is a high-performance ATV for off-road use only, for sport-type recreational and competitive use
by experienced operators.

IMPORTANT MANUAL INFORMATION

FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN SERIOUS IN­JURY OR DEATH. Particularly important information is distinguished in this manual by the following notations:
This is the safety alert symbol. It is used to alert you to potential per­sonal injury hazards. Obey all safety messages that follow this sym­bol to avoid possible injury or death.
WARNING
NOTICE
TIP
A WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
A NOTICE indicates special precautions that must be taken to avoid damage to the vehicle or other property.
A TIP provides key information to make procedures easier or clearer.
* Product and specifications are subject to change without notice.

IMPORTANT NOTICE

This ATV is designed and manufactured for use on unpaved surfaces only. It is unsafe to operate this ATV on any paved surface, paved street, paved road or motorway. Please check your local riding laws and regulations before operating this ATV.
EBUM0010
YFM35R-W
OWNER’S MANUAL
©2011 by MBK INDUSTRIE
1st edition, July 2011
All rights reserved
Any reprinting or unauthorized use
without the written permission of
MBK INDUSTRIE
is expressly prohibited.
Printed in France.

TABLE OF CONTENTS

LOCATION OF THE WARNING AND
SPECIFICATION LABELS ............................ 1-1
SAFETY INFORMATION .............................. 2-1
DESCRIPTION .............................................. 3-1
Left view ...................................................... 3-1
Right view.................................................... 3-1
Controls and instruments ............................ 3-2
INSTRUMENT AND CONTROL
FUNCTIONS .................................................. 4-1
Main switch ................................................ 4-1
Indicator lights ............................................ 4-2
Speedometer .............................................. 4-2
Handlebar switches .................................... 4-3
Throttle lever .............................................. 4-4
Speed limiter .............................................. 4-5
Clutch lever ................................................ 4-6
Brake lever ................................................. 4-6
Brake pedal ................................................ 4-6
Parking brake lever .................................... 4-7
Shift pedal .................................................. 4-8
Drive select lever ........................................ 4-8
Fuel tank cap ..............................................4-9
Fuel .............................................................4-9
Fuel cock ..................................................4-11
Starter (choke) ..........................................4-12
Steering lock .............................................4-13
Seat ..........................................................4-14
Adjusting the front shock absorber
assemblies ..............................................4-14
Adjusting the rear shock absorber
assembly .................................................4-16
PRE-OPERATION CHECKS ..........................5-1
Fuel .............................................................5-3
Engine oil ....................................................5-3
Front and rear brakes .................................5-3
Throttle lever ...............................................5-3
Drive chain ..................................................5-4
Tires ............................................................5-4
Chassis fasteners .......................................5-6
Instruments, lights and switches .................5-6
OPERATION...................................................6-1
Starting a cold engine .................................6-1
Starting a warm engine ...............................6-3
Operating the drive select lever and
driving in reverse ...................................... 6-3
Shifting ....................................................... 6-4
Engine break-in .......................................... 6-6
Parking ....................................................... 6-7
Parking on a slope ..................................... 6-7
Accessories and loading ............................ 6-8
RIDING YOUR ATV ...................................... 7-1
GETTING TO KNOW YOUR ATV............... 7-2
RIDE WITH CARE AND GOOD
JUDGMENT .............................................. 7-2
BE CAREFUL WHERE YOU RIDE............. 7-9
TURNING YOUR ATV .............................. 7-12
CLIMBING UPHILL ................................... 7-13
RIDING DOWNHILL.................................. 7-16
CROSSING A SLOPE............................... 7-18
CROSSING THROUGH SHALLOW
WATER ................................................... 7-19
RIDING OVER ROUGH TERRAIN ........... 7-20
SLIDING AND SKIDDING ......................... 7-21
WHAT TO DO IF... .................................... 7-22
WHAT TO DO... ........................................ 7-22
PERIODIC MAINTENANCE AND
ADJUSTMENT ............................................... 8-1
Owner’s manual and tool kit ....................... 8-2
Periodic maintenance chart for
the emission control system .....................8-3
General maintenance and lubrication
chart ..........................................................8-5
Checking the spark plug .............................8-9
Engine oil and oil filter element .................8-11
Cleaning the air filter element ...................8-15
Cleaning the spark arrester ......................8-18
Adjusting the carburetor ............................8-20
Adjusting the engine idling speed .............8-20
Adjusting the throttle lever free play .........8-21
Valve clearance ........................................8-22
Brakes .......................................................8-22
Checking the front and rear brake pads ...8-22
Checking the brake fluid level ...................8-23
Changing the brake fluid ...........................8-25
Checking the front brake lever free play ...8-25
Checking the brake pedal height ..............8-25
Adjusting the parking brake free play .......8-26
Brake light switches ..................................8-27
Adjusting the clutch lever free play ...........8-28
Drive chain slack .......................................8-29
Lubricating the drive chain ........................8-32
Checking and lubricating the cables .........8-32
Checking and lubricating the brake and
clutch levers ............................................8-33
Checking and lubricating the brake and
shift pedals ............................................. 8-34
Checking the wheel hub bearings ............ 8-35
Lubricating the swingarm pivots ............... 8-35
Lubricating the rear suspension relay arm
and connecting arm pivoting points ........ 8-35
Lubricating the upper and lower arm
pivots ...................................................... 8-36
Lubricating the steering shaft ................... 8-37
Battery ...................................................... 8-38
Replacing a fuse ...................................... 8-40
Headlight bulb .......................................... 8-41
Headlight beam ........................................ 8-41
Replacing the tail/brake light bulb ............ 8-41
Replacing a turn signal light bulb ............. 8-42
Replacing the license plate light bulb ....... 8-42
Auxiliary light bulb .................................... 8-44
Removing a wheel .................................... 8-44
Installing a wheel ...................................... 8-44
Troubleshooting ....................................... 8-45
Troubleshooting chart .............................. 8-46
CLEANING AND STORAGE.......................... 9-1
Cleaning ..................................................... 9-1
Storage ....................................................... 9-2
SPECIFICATIONS .......................................10-1
CONSUMER INFORMATION.......................11-1
Identification numbers ...............................11-1

LOCATION OF THE WARNING AND SPECIFICATION LABELS

Read and understand all of the labels on your ATV. These labels contain important information for safe and proper operation. Never remove any labels from your ATV. If a label becomes difficult to read or comes off, request a replace­ment label from your Yamaha dealer.
1
5 4
2
3
1
6
1-1
1
3
1
4AA-22259-40
2
1AS-2816P-00
25.0 kPa
0.25 kgf/cm²
3.6 psi
25.0 kPa
0.25 kgf/cm²
3.6 psi
5YT-2816M-M0
1-2
45
4D3-2816L-20
6
2011
43P-2816R-01
YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN
8AC-2817L-00
1
1-3
Familiarize yourself with the following pictograms and read the explanatory text, then make sure to check the pictograms that apply to your model.
1
Read the Owner’s manual.
ALWAYS use an approved helmet and protective gear.
NEVER permit children under age 6 to operate this ATV. Operation of this ATV by children under the age of 6 increases the risk of severe injury or death. Adult supervision required for children under age 16.
NEVER permit children under age 10 to operate this ATV. Operation of this ATV by children under the age of 10 increases the risk of severe injury or death. Adult supervision required for children under age 16.
NEVER permit children under age 12 to operate this ATV. Operation of this ATV by children under the age of 12 increases the risk of severe injury or death. Adult supervision required for children under age 16.
NEVER operate this ATV if you are under age 16. Operating this ATV if you are under the age of 16 increases your chance of severe injury or death.
NEVER use on paved roads.
NEVER carry passengers.
1-4
NEVER use with drugs or alcohol.
NEVER store fuel or flammable liquids.
This unit contains high-pressure nitrogen gas. Mishandling can cause an explosion. Do not incinerate, puncture or open.
Use unleaded gasoline only.
Measure the tire pressure when the tires are cold.
**.* kPa *.** kgf/cm²
*.* psi
Adjust the tire pressure. Improper tire pressure can cause loss of control. Loss of control can result in severe injury or death.
**.* kPa *.** kgf/cm²
*.* psi
Turning the ATV in 4WD-LOCK (“DIFF.LOCK”) takes more effort. Operate at a slow speed and allow extra time and distance for maneuvers to avoid loss of control.
This pictogram shows the loading limits and/or maximum load capacity for this ATV. Follow all load limits and other loading guidelines in this manual. Load may include the driver, passenger, human protective gear, accessories, goods, luggage, and all other load related items. Make sure you do not exceed the load limits. Overloading can cause loss of control. Loss of control can result in severe injury or death.
1
1-5
This pictogram shows trailer Hitch Tow
1
weight limit. (Combined weight of the trailer and all cargo in the trailer.) Overloading can cause loss of control. Loss of control can result in severe injury or death.
This pictogram shows trailer Hitch Tongue weight limit. (Weight on the trailer tongue.) Overloading can cause loss of control. Loss of control can result in severe injury or death.
1
******
*** kW *** kg
23
1
****
YAMAHA MOTOR CO., LTD. 2500 SHINGAI, IWATA, JAPAN
1
Model Name
2
Max. Power
3
Mass In Running Order
1
Year of construction
1-6

SAFETY INFORMATION

AN ATV IS NOT A TOY AND CAN BE HAZARD­OUS TO OPERATE.
An ATV handles differently from other vehicles, in­cluding motorcycles and cars. A collision or roll­over can occur quickly, even during routine maneuvers such as turning and riding on hills or over obstacles, if you fail to take proper precau­tions. SEVERE INJURY OR DEATH can result if you do not follow these instructions:
● Read this manual and all labels carefully and fol-
low the operating procedures described.
● Never operate an ATV without proper training or
instruction.
● Always follow the age recommendation:
– A child under 16 years old should never oper­ate an ATV with engine size greater than 90 cc.
● Never allow a child under age 16 to operate an
ATV without adult supervision, and never allow continued use of an ATV by a child if he or she does not have the abilities to operate it safely.
● Never carry a passenger on an ATV.
● Always avoid operating an ATV on any paved
surfaces, including sidewalks, driveways, park­ing lots and paved streets.
● Never operate an ATV on any paved street,
paved road or motorway.
● Watch carefully for other vehicles when operat-
ing on unpaved public streets or roads. Make sure you know your country’s laws and regula­tions before you ride on unpaved public streets or roads.
● Never operate an ATV without wearing an ap-
proved motorcycle helmet that fits properly. You should also wear eye protection (goggles or face shield), gloves, boots, a long-sleeved shirt or a jacket, and long pants.
● Never consume alcohol or drugs before or while
operating this ATV.
● Never operate at speeds too fast for your skills
or the riding conditions. Always go at a speed that is proper for the terrain, visibility, operating conditions, and your experience.
● Never attempt wheelies, jumps, or other stunts.
2-1
2
● Always inspect your ATV each time you use it to
make sure it is in safe operating condition. Al­ways follow the inspection and maintenance procedures and schedules described in this
2
manual.
● Always keep both hands on the handlebars and
both feet on the footboards of the ATV during operation.
● Always go slowly and be extra careful when op-
erating on unfamiliar terrain. Always be alert to changing terrain conditions when operating the ATV.
● Never operate on excessively rough, slippery or
loose terrain until you have learned and prac­ticed the skills necessary to control the ATV on such terrain. Always be especially cautious on these kinds of terrain.
● Always follow proper procedures for turning as
described in this manual. Practice turning at low speeds before attempting to turn at faster speeds and never turn at excessive speeds.
● Never operate the ATV on hills too steep for the
ATV or for your abilities. Practice on smaller hills before attempting larger hills.
● Always follow proper procedures for climbing
hills as described in this manual. Check the ter­rain carefully before you start up any hill. Never climb hills with excessively slippery or loose sur­faces. Shift your weight forward. Never open the throttle suddenly or make sudden gear changes. Never go over the top of a hill at high speed.
● Always follow proper procedures for going down
hills and for braking on hills as described in this manual. Check the terrain carefully before you start down any hill. Shift your weight backward. Never go down a hill at high speed. Avoid going down a hill at an angle that would cause the ve­hicle to lean sharply to one side. Go straight down the hill where possible.
● Always follow proper procedures for crossing
the side of a hill as described in this manual. Avoid hills with excessively slippery or loose sur­faces. Shift your weight to the uphill side of the ATV. Never attempt to turn the ATV around on any hill until you have mastered the turning tech­nique described in this manual on level ground. Avoid crossing the side of a steep hill if possible.
● Always use proper procedures if you stall or roll
backwards when climbing a hill. To avoid stall­ing, use the proper gear and maintain a steady
2-2
speed when climbing a hill. If you stall or roll backwards, follow the special procedure for braking described in this manual. Dismount on the uphill side or to a side if pointed straight up­hill. Turn the ATV around and remount, following the procedure described in this manual.
● Always check for obstacles before operating in a
new area.
● Never attempt to operate over large obstacles,
such as large rocks or fallen trees. Always follow proper procedures when operating over obsta­cles as described in this manual.
● Always be careful when skidding or sliding.
Learn to safely control skidding or sliding by practicing at low speeds and on level, smooth terrain. On extremely slippery surfaces, such as ice, go slowly and be very cautious in order to re­duce the chance of skidding or sliding out of con­trol.
● Never operate an ATV in fast flowing water or in
water deeper than that recommended in this manual. Remember that wet brakes may have reduced stopping ability. Test your brakes after leaving water. If necessary, apply them several times to let friction dry out the linings.
● Always be sure there are no obstacles or people
behind you when you operate in reverse. When it is safe to proceed in reverse, go slowly.
● Always use the size and type of tires specified in
this manual.
● Always maintain proper tire pressure as de-
scribed in this manual.
● Never modify an ATV through improper installa-
tion or use of accessories.
● Never exceed the stated load capacity for an
ATV. Cargo should be properly distributed and securely attached. Reduce speed and follow in­structions in this manual for carrying cargo or pulling a trailer. Allow greater distance for brak­ing.
EWB00072
WARNING
Avoid Carbon Monoxide Poisoning All engine exhaust contains carbon monoxide, a deadly gas. Breathing carbon monoxide can cause headaches, dizziness, drowsiness, nau­sea, confusion, and eventually death. Carbon Monoxide is a colorless, odorless, tasteless gas which may be present even if you do not see or smell any engine exhaust. Deadly levels of carbon monoxide can collect rapidly
2
2-3
and you can quickly be overcome and unable to save yourself. Also, deadly levels of carbon monoxide can linger for hours or days in en­closed or poorly ventilated areas. If you experi-
2
ence any symptoms of carbon monoxide poisoning, leave the area immediately, get fresh air, and SEEK MEDICAL TREATMENT.
● Do not run engine indoors. Even if you try to
ventilate engine exhaust with fans or open windows and doors, carbon monoxide can rapidly reach dangerous levels.
● Do not run engine in poorly ventilated or par-
tially enclosed areas such as barns, garages, or carports.
● Do not run engine outdoors where engine
exhaust can be drawn into a building through openings such as windows and doors.
EWB02591
WARNING
When transporting the ATV in another vehicle, be sure it is kept upright and that the fuel cock is in the “OFF” position. Otherwise, fuel may leak out of the carburetor or fuel tank.
2-4

DESCRIPTION

Left view

1 2 3 4 5 6,7 8
9
10
1. Headlight
2. Front shock absorber assembly spring preload adjusting ring
3. Fuel cock
4. Throttle stop screw
5. Air filter case
6. Battery
7. Owner’s tool kit
8. Tail/brake light
9. Oil filter element
10.Shift pedal

Right view

123456
3
78910
1. Spark arrester
2. Fuse
3. Rear shock absorber assembly spring preload adjusting nut
4. Drive select lever
5. Fuel tank cap
6. Spark plug
7. Engine oil filler cap
8. Brake pedal
9. Rear brake light switch
10.Rear brake fluid reservoir
3-1

Controls and instruments

54321
3
8910 7 6
1. Clutch lever
2. Parking brake lever
3. Speedometer unit
4. Front brake fluid reservoir
5. Brake lever
6. Throttle lever
7. Engine stop switch
8. Main switch
9. Starter (choke)
10.Handlebar switches
TIP
The ATV you have purchased may differ slightly from the figures shown in this manual.
3-2

INSTRUMENT AND CONTROL FUNCTIONS

Main switch

The positions of the main switch are as follows:
ON
All electrical systems are supplied with power. The auxiliary light, taillight and license plate light come on, and the engine can be started. The key cannot be removed.
TIP
The headlight comes on when the light switch is set to “” or “”.
OFF
All electrical systems are off. The key can be re­moved.
4
1. Main switch
4-1

Indicator lights

Reverse indicator light “”
This indicator light comes on when the transmis­sion is in the reverse position.
12
4
1. High beam indicator light “”
2. Turn signal indicator light “”
3. Reverse indicator light “R”
4. Neutral indicator light “N”
Turn signal indicator light “”
This indicator light flashes when the turn signal switch is pushed to the left or right.
Neutral indicator light “”
This indicator light comes on when the transmis­sion is in the neutral position.
High beam indicator light “”
This indicator light comes on when the high beam of the headlight is switched on.

Speedometer

This speedometer is equipped with an odometer. The odometer shows the total distance traveled.
2
1
1. Speedometer
2. Odometer
4-2

Handlebar switches

4
1. Engine stop switch “ / ”
1. Light switch “ //”
2. Hazard switch “”
3. Turn signal switch “ / ”
4. Horn switch “”
5. Start switch “”
Engine stop switch “ / ”
Set this switch to “” before starting the engine. The engine stop switch controls the ignition and stops the engine when it is running. Use this switch to stop the engine in an emergency situation. The engine will not start or run when this switch is set to “”.
Start switch “”
Push this switch to crank the engine with the start­er. See the starting instructions on page 6-1 prior to starting the engine.
4-3
Light switch “ //”
Set the switch to “” to turn on the high beam. Set this switch to “” to turn on the low beam. Set the switch to “” to turn off the headlight.
NOTICE
Do not use the headlight with the engine turned off for an extended period of time, otherwise
4
the battery may discharge to the point that the starter motor will not operate properly. If this should happen, remove the battery and re­charge it. (See page 8-38.)
Hazard switch “”
With the key in the “ON” position, use this switch to turn on the hazard lights (simultaneous flashing of all turn signal lights). The hazard lights are used in case of an emergen­cy or to warn other drivers when your vehicle is stopped where it might be a traffic hazard.
NOTICE
Do not use the hazard lights for an extended length of time with the engine not running, oth­erwise the battery may discharge.
Turn signal switch “ / ”
To signal a right-hand turn, push this switch to “”. To signal a left-hand turn, push this switch to “”. When released, the switch returns to the center position. To cancel the turn signal lights, push the switch in after it has returned to the center position.
Horn switch “”
Press the switch to sound the horn.

Throttle lever

Once the engine is running, pushing the throttle le­ver will increase the engine speed. Regulate the speed of the ATV by varying the throttle position. Because the throttle is spring­loaded, the ATV will decelerate, and the engine will return to an idle any time the throttle lever is re­leased.
4-4
1. Throttle lever
Before starting the engine, check the throttle to be sure it is operating smoothly. Make sure it returns to the idle position as soon as the lever is released.

Speed limiter

Your ATV is equipped with an adjustable speed limiter. The speed limiter keeps the throttle from fully opening, even when the throttle lever is pushed to the maximum.
1. Loosen the locknut.
2. To increase the maximum engine power avail­able and the maximum speed of the ATV, turn the adjusting screw in direction (a). To de­crease the maximum engine power available and the maximum speed of the ATV, turn the adjusting screw in direction (b). Do not turn
the adjusting screw out more than 12 mm (0.47 in) or the throttle cable could be dam­aged. Always make sure the throttle lever free play is adjusted to 2.0–4.0 mm (0.08–0.16 in). (See page 8-21.) WARNING! Improper ad-
justment of the speed limiter and throttle could cause throttle cable damage or im­proper throttle operation. You could lose control, resulting in an accident.
1. Locknut
2. Adjusting screw
3. No more than 12 mm (0.47 in)
3. Tighten the locknut.
[EWB00241]
4
4-5

Clutch lever

The clutch lever is located on the left handlebar and the ignition circuit cut-off system is incorporat­ed in the clutch lever holder. To disengage the clutch, pull the clutch lever toward the handlebar grip. To engage the clutch, release the clutch lever. The clutch lever should be pulled rapidly and re-
4
leased slowly for smooth clutch operation. (See page 6-1 for a description of the ignition circuit cut­off system.)
1. Clutch lever

Brake lever

The brake lever is located at the right handlebar grip. To apply the front brake, pull the brake lever toward the handlebar grip.
1. Brake lever

Brake pedal

The brake pedal is located on the right side of the ATV. This model is equipped with a unified brake sys­tem.
4-6
When pressing down on the brake pedal, the brak­ing force is applied to the rear brake and a portion of the front brakes. For full braking performance, apply both the brake lever and the brake pedal si­multaneously.
1. Brake pedal

Parking brake lever

Use the parking brake before starting the engine or parking the ATV, especially on a slope. To apply the parking brake, move the parking brake lever in direction (a). To release the parking brake, move the parking brake lever in direction (b).
4
1. Parking brake lever (locked position)
1. Parking brake lever (unlocked position)
4-7
EWB00220
WARNING
● Always set the parking brake before starting
the engine. The ATV could start moving un­expectedly if the parking brake is not ap­plied. This could cause loss of control or a collision.
● Always be sure you have released the park-
4
ing brake before you begin to ride. The brake could overheat if you ride the ATV without re­leasing the parking brake. You could lose braking performance which could cause an accident. You could also wear out the brakes prematurely.

Shift pedal

This ATV is equipped with a constant-mesh 6­speed transmission. The shift pedal is located on the left side of the engine and is used in combina­tion with the clutch when shifting.
1. Shift pedal

Drive select lever

The drive select lever is used for driving the ATV either forward or in reverse. See the “Operating the drive select lever and driving in reverse” section on page 6-3 for the drive select lever operation.
4-8
1. Drive select lever 1. Fuel tank cap
4

Fuel tank cap

Remove the fuel tank cap by turning it counter­clockwise.

Fuel

Make sure there is sufficient gasoline in the tank.
EWB02521
WARNING
Gasoline and gasoline vapors are extremely flammable. To avoid fires and explosions and to reduce the risk of injury when refueling, fol­low these instructions.
1. Before refueling, turn off the engine and be sure that no one is sitting on the vehicle. Nev­er refuel while smoking, or while in the vicinity
4-9
of sparks, open flames, or other sources of ig­nition such as the pilot lights of water heaters and clothes dryers.
2. Do not overfill the fuel tank. When refueling, be sure to insert the pump nozzle into the fuel tank filler hole. Stop filling when the fuel reach­es the bottom of the filler tube. Because fuel
4
expands when it heats up, heat from the en­gine or the sun can cause fuel to spill out of the fuel tank.
1. Fuel tank filler tube
2. Maximum fuel level
Recommended fuel:
Regular unleaded gasoline only with a re­search octane number of 91 or higher
Fuel tank capacity:
9.0 L (2.38 US gal, 1.98 Imp.gal)
Fuel reserve amount:
2.7 L (0.71 US gal, 0.59 Imp.gal)
3. Wipe up any spilled fuel immediately.
NOTICE: Immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteriorate painted surfaces or plastic parts.
[ECB00981]
4. Turn the fuel tank cap fully clockwise to make sure it is securely closed.
EWB02531
WARNING
Gasoline is poisonous and can cause injury or death. Handle gasoline with care. Never siphon gasoline by mouth. If you should swallow some gasoline or inhale a lot of gasoline vapor, or get some gasoline in your eyes, see your doctor immediately. If gasoline spills on your skin, wash with soap and water. If gasoline spills on your clothing, change your clothes.
4-10
Loading...
+ 106 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use