Yamaha RAPTOR 350 User Manual
READ THIS MANUAL CAREFULLY!
It contains important safety information.
OWNER’S MANUAL
YFM350RV
WARNING
This ATV should not be ridden by anyone under 16 years of age.
5YT-28199-13LIT-11626-19-68
EBU00776
EBU13320
1-
INTRODUCTION
Congratulations on your purchase of the Yamaha YFM350R. It represents the result of many
years of Yamaha experience in the production of fine sporting, touring, and pacesetting racing
machines. With the purchase of this Yamaha, you can now appreciate the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields.
This manual will provide you with a good basic understanding of the features and operation of this
ATV.
This manual includes important safety information. It provides information about
special techniques and skills necessary to ride your ATV.
It also includes basic maintenance
and inspection procedures. If you have any questions regarding the operation or maintenance of
your ATV, please consult a Yamaha dealer.
AN IMPORTANT SAFETY MESSAGE:
●
READ THIS MANUAL TOGETHER WITH TIPS FOR THE ATV RIDER CAREFULLY AND
COMPLETELY BEFORE OPERATING YOUR ATV. MAKE SURE YOU UNDERSTAND ALL
INSTRUCTIONS.
●
PAY CLOSE ATTENTION TO THE WARNING AND CAUTION LABELS ON THE ATV.
●
NEVER OPERATE AN ATV WITHOUT PROPER TRAINING OR INSTRUCTION. FREE
TRAINING IS AVAILABLE TO ANYONE WHO BUYS A NEW ATV. CALL 1-800-887-2887
FOR MORE INFORMATION.
●
THIS ATV, AND ANY OTHER ATV OVER 90cc, SHOULD NOT BE RIDDEN BY ANYONE
UNDER 16 YEARS OF AGE.
●
THIS ATV IS A HIGH PERFORMANCE ATV FOR OFF-ROAD USE ONLY, FOR SPORT
TYPE RECREATIONAL AND COMPETITIVE USE BY EXPERIENCED OPERATORS.
EBU00801
WARNING
CAUTION:
NOTE:
1-
IMPORTANT MANUAL INFORMATION
FAILURE TO FOLLOW THE WARNINGS CONTAINED IN THIS MANUAL CAN RESULT IN
SERIOUS INJURY OR DEATH.
Particularly important information is distinguished in this manual by the following notations:
The Safety Alert Symbol means ATTENTION! BECOME ALERT!
YOUR SAFETY IS INVOLVED!
Failure to follow WARNING instructions could result in severe
injury or death to the machine operator, a bystander or a person
inspecting or repairing the machine.
A CAUTION indicates special precautions that must be taken to
avoid damage to the machine.
A NOTE provides key information to make procedures easier or clearer.
EBU15000
2-
IMPORTANT NOTICE
This ATV is designed and manufactured for OFF-ROAD use only. It is illegal and unsafe to operate this ATV on any public street, road or highway.
This ATV complies with all applicable OFF-ROAD noise level and spark arrester laws and regulations in effect at the time of manufacture.
Please check your local riding laws and regulations before operating this ATV.
EBU13330
YFM350RV
OWNER’S MANUAL
AFFIX DEALER
LABEL HERE
©2005 by Yamaha Motor Corporation,
U.S.A.
1st edition, June 2005
All rights reserved.
Any reprinting or unauthorized use
without the written permission
of Yamaha Motor Corporation, U.S.A.
is expressly prohibited.
Printed in Japan.
P/N LIT-11626-19-68
EBU00014
WARNING
Indicates a potential hazard that could
result in serious injury or death.
CONTENTS
LOCATION OF THE WARNING
1
AND SPECIFICATION LABELS....... 1-1
SAFETY INFORMATION.................. 2-1
2
DESCRIPTION AND MACHINE
3
IDENTIFICATION ............................. 3-1
Identification number records.......... 3-2
Key identification number................ 3-2
Vehicle identification number .......... 3-3
Model label ...................................... 3-3
CONTROL FUNCTIONS...................4-1
4
Main switch ......................................4-1
Indicator lights..................................4-2
Handlebar switches .........................4-2
Throttle lever ....................................4-4
Speed limiter ....................................4-5
Clutch lever ......................................4-6
Brake lever.......................................4-6
Brake pedal......................................4-7
Parking brake lever..........................4-8
Shift pedal ........................................4-9
Drive select lever ...........................4-10
Fuel tank cap .................................4-10
Fuel cock........................................4-11
Starter (choke) ...............................4-12
Seat................................................4-13
Front shock absorber
adjustment ...................................4-14
Rear shock absorber
adjustment ...................................4-16
PRE-OPERATION CHECKS ........... 5-1
5
Front and rear brakes ..................... 5-2
Fuel ................................................. 5-4
Engine oil ........................................ 5-6
Chain............................................... 5-6
Throttle lever ................................... 5-6
Fittings and fasteners...................... 5-6
Lights............................................... 5-7
Switches.......................................... 5-7
Tires ................................................ 5-8
How to measure tire pressure......... 5-9
Tire wear limit................................ 5-10
OPERATION..................................... 6-1
6
Starting a cold engine ..................... 6-1
Starting a warm engine................... 6-3
Warming up..................................... 6-3
Drive select lever operation and
reverse driving............................... 6-4
Shifting ............................................ 6-5
To start out and accelerate ............. 6-6
To decelerate .................................. 6-7
Engine break-in............................... 6-8
Parking............................................. 6-9
Parking on a slope......................... 6-10
Accessories and loading ...............6-11
RIDING YOUR ATV ..........................7-1
7
Getting to know your ATV ...............7-3
Ride with care and good
judgement...................................... 7-4
Be careful where you ride.............. 7-16
Turning your ATV ..........................7-23
Climbing uphill ............................... 7-25
Riding downhill ..............................7-30
Crossing a slope............................7-32
Crossing through shallow
water............................................7-34
Riding over rough terrain............... 7-36
Sliding and skidding.......................7-38
What to do if...................................7-40
What to do .................................... 7-40
PERIODIC MAINTENANCE AND
8
ADJUSTMENT.................................. 8-1
Owner’s manual and tool kit............ 8-1
Periodic maintenance chart for
the emission control system.......... 8-3
General maintenance and
lubrication chart ............................. 8-4
Engine oil and oil filter element ....... 8-6
Spark plug inspection.................... 8-10
Air filter element cleaning.............. 8-12
Spark arrester cleaning ................. 8-16
Carburetor adjustment................... 8-17
Idle speed adjustment ................... 8-18
Valve clearance adjustment.......... 8-18
Throttle lever adjustment............... 8-19
Front brake pad inspection............ 8-19
Rear brake pad inspection ............ 8-20
Brake fluid level check................... 8-21
Brake fluid replacement................. 8-22
Front brake lever free play ............8-23
Brake pedal height adjustment...... 8-24
Parking brake adjustment ............. 8-25
Adjusting the rear brake light
switch ...........................................8-27
Clutch lever free play
adjustment ...................................8-27
Drive chain slack check .................8-29
Drive chain slack adjustment.........8-30
Lubricating the drive chain.............8-31
Cable inspection and lubrication....8-33
Brake and shift pedal/brake and
clutch lever lubrication .................8-33
Lubricating the front upper and
lower arm pivots...........................8-35
Rear arm pivot lubrication..............8-36
Wheel removal...............................8-37
Wheel installation...........................8-38
Battery............................................8-39
Battery maintenance......................8-40
Fuse replacement ..........................8-41
Replacing a headlight bulb ............8-42
Headlight beam adjustment...........8-45
Tail/brake light bulb
replacement .................................8-45
Troubleshooting .............................8-47
Troubleshooting chart ................... 8-48
CLEANING AND STORAGE............ 9-1
9
A. Cleaning...................................... 9-1
B. Storage ....................................... 9-3
SPECIFICATIONS.......................... 10-1
10
NOISE REGULATION.................... 11-1
11
MAINTENANCE RECORD ............ 12-1
12
ATV LIMITED WARRANTY............ 13-1
13
YAMAHA EXTENDED SERVICE
14
(Y.E.S.) ........................................... 14-1
EBU00464
LOCATION OF THE WARNING AND
SPECIFICATION LABELS
1-1
Read and understand all of the labels on your
machine. They contain important information
for safe and proper operation of your ATV.
2
1
2
Never remove any labels from your ATV. If a
label becomes difficult to read or comes off, a
replacement label is available from your
Yamaha dealer.
1
DRIVE SELECT LEVER
Read owner’s manual carefully
before operating.
When shifting the drive select lever,
always be sure to stop the ATV
and apply the rear brake.
5YT-2151E-30
3
4
5
6
7
8
3
9
10
11
12
13
14
1-2
4
6
5
WARNING
UNDER
Operating this ATV if you are under
the age of 16 increases your chance
of severe injury or death.
NEVER operate this ATV if you are
under age 16.
5FE-21697-01
1-3
EBU13351
SAFETY INFORMATION
AN ATV IS NOT A TOY AND CAN BE HAZARDOUS TO OPERATE.
from other vehicles including motorcycles and cars. A collision or rollover can occur quickly, even
during routine maneuvers such as turning and riding on hills or over obstacles, if you fail to take
proper precautions.
SEVERE INJURY OR DEATH can result if you do not follow these instructions:
●
Read this manual and all labels carefully and follow the operating procedures described.
●
Never operate an ATV without proper training or instruction.
Beginners should receive training from a certified instructor. Contact an authorized ATV dealer
or call 1-800-887-2887 to find out about the training courses nearest you.
●
Always follow the age recommendation:
– A child under 16 years old should never operate an ATV with engine size greater than 90cc.
●
Never allow a child under age 16 to operate an ATV without adult supervision, and never allow
continued use of an ATV by a child if he or she does not have the abilities to operate it safely.
●
Never carry a passenger on an ATV.
An ATV handles differently
Take a Training Course.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2-1
●
Always avoid operating an ATV on any paved surfaces, including sidewalks, driveways, parking lots and streets.
●
Never operate an ATV on any public street, road or highway, even a dirt or gravel one.
●
Never operate an ATV without wearing an approved motorcycle helmet that fits properly. You
should also wear eye protection (goggles or face shield), gloves, boots, a long-sleeved shirt or
jacket, and long pants.
●
Never consume alcohol or drugs before or while operating this ATV.
●
Never operate at speeds too fast for your skills or the conditions. Always go at a speed that is
proper for the terrain, visibility, operating conditions, and your experience.
●
Never attempt wheelies, jumps, or other stunts.
●
Always inspect your ATV each time you use it to make sure it is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in this manual.
●
Always keep both hands on the handlebars and both feet on the footboards of the ATV during
operation.
●
Always go slowly and be extra careful when operating on unfamiliar terrain. Always be alert to
changing terrain conditions when operating the ATV.
●
Never operate on excessively rough, slippery or loose terrain until you have learned and practiced the skills necessary to control the ATV on such terrain. Always be especially cautious on
these kinds of terrain.
2-2
●
Always follow proper procedures for turning as described in this manual. Practice turning at low
speeds before attempting to turn at faster speeds. Do not turn at excessive speed.
●
Never operate the ATV on hills too steep for the ATV or for your abilities. Practice on smaller
hills before attempting larger hills.
●
Always follow proper procedures for climbing hills as described in this manual. Check the terrain carefully before you start up any hill. Never climb hills with excessively slippery or loose
surfaces. Shift your weight forward. Never open the throttle suddenly or make sudden gear
changes. Never go over the top of a hill at high speed.
●
Always follow proper procedures for going down hills and for braking on hills as described in
this manual. Check the terrain carefully before you start down any hill. Shift your weight backward. Never go down a hill at high speed. Avoid going down a hill at an angle that would cause
the vehicle to lean sharply to one side. Go straight down the hill where possible.
●
Always follow proper procedures for crossing the side of a hill as described in this manual.
Avoid hills with excessively slippery or loose surfaces. Shift your weight to the uphill side of the
ATV. Never attempt to turn the ATV around on any hill until you have mastered the turning
technique described in this manual on level ground. Avoid crossing the side of a steep hill if
possible.
2-3
●
Always use proper procedures if you stall or roll backwards when climbing a hill. To avoid stalling, use the proper gear and maintain a steady speed when climbing a hill. If you stall or roll
backwards, follow the special procedure for braking described in this manual. Dismount on the
uphill side or to a side if pointed straight uphill. Turn the ATV around and remount, following the
procedure described in this manual.
●
Always check for obstacles before operating in a new area. Never attempt to operate over
large obstacles, such as large rocks or fallen trees. Always follow proper procedures when operating over obstacles as described in this manual.
●
Always be careful when skidding or sliding. Learn to safely control skidding or sliding by practicing at low speeds and on level, smooth terrain. On extremely slippery surfaces, such as ice,
go slowly and be very cautious in order to reduce the chance of skidding or sliding out of control.
●
Never operate an ATV in fast flowing water or in water deeper than that recommended in this
manual. Remember that wet brakes may have reduced stopping ability. Test your brakes after
leaving water. If necessary, apply them several times to let friction dry out the linings.
●
Always be sure there are no obstacles or people behind you when you operate in reverse.
When it is safe to proceed in reverse, go slowly.
2-4
●
Always use the size and type of tires specified in this manual.
●
Always maintain proper tire pressure as described in this manual.
●
Never modify an ATV through improper installation or use of accessories.
●
Never exceed the stated load capacity for an ATV. Cargo should be properly distributed and
securely attached. Reduce speed and follow instructions in this manual for carrying cargo or
pulling a trailer. Allow greater distance for braking.
FOR MORE INFORMATION ABOUT ATV SAFETY,
call the Consumer Products Safety Com-
mission at 1-800-638-2772, or the ATV Distributor’s Safety Hotline at 1-800-852-5344.
2-5
WARNI NG
POTENTIAL HAZARD
Improper handling of gasoline.
WHAT CAN HAPPEN
Gasoline can catch fire and you could
be burned.
HOW TO AVOID THE HAZARD
Always turn off the engine when refueling.
Do not refuel immediately after the engine has been running and is still very
hot.
Do not spill gasoline on the engine or
exhaust pipe/muffler when refueling.
Never refuel while smoking, or in the vicinity of sparks, open flames, or other
sources of ignition such as the pilot
lights of water heaters and clothes dryers.
When transporting the ATV in another
vehicle, be sure it is kept upright and
that the fuel cock is in the “OFF” position. Otherwise, fuel may leak out of the
carburetor or fuel tank.
WHAT CAN HAPPEN
Gasoline is poisonous and can cause
injuries.
HOW TO AVOID THE HAZARD
If you should swallow some gasoline or
inhale a lot of gasoline vapor, or get
some gasoline in your eyes, see your
doctor immediately. If gasoline spills on
your skin, wash with soap and water. If
gasoline spills on your clothing, change
your clothes.
2-6
WARNI NG
POTENTIAL HAZARD
Starting or running the engine in a
closed area.
WHAT CAN HAPPEN
Exhaust fumes are poisonous and may
cause loss of consciousness and death
within a short time.
HOW TO AVOID THE HAZARD
Always operate your ATV in an area with
adequate ventilation.
2-7
EBU00032
DESCRIPTION AND MACHINE IDENTIFICATION
1. Spark arrester
2. Seat
3. Drive select lever
4. Fuel tank cap
5. Main switch
6. Brake pedal
7. Headlights
8. Front wheel
9. Fuel cock
10. Rear wheel
11. Shift pedal
12. Clutch lever
13. Parking brake lever
14. Brake lever
15. Throttle lever
16. Handlebar switches
NOTE:
The machine you have purchased may differ
slightly from those shown in the figures of this
manual.
3-1
EBU00600
Identification number records
Record the key identification number, vehicle
identification number and model label information in the spaces provided for assistance
when ordering spare parts from a Yamaha
dealer or for reference in case the vehicle is
stolen.
1. KEY IDENTIFICATION NUMBER:
2. VEHICLE IDENTIFICATION NUMBER:
EBU00035
Key identification number
The key identification number is stamped on
the key as shown in the following illustration.
This number can be used for ordering a new
key.
1
2
3
4
5
6
7
8
9
10
3. MODEL LABEL INFORMATION:
1. Key identification number
3-2
11
12
13
14
EBU00036
Vehicle identification number
The vehicle identification number is stamped
into the frame.
1. Vehicle identification number
NOTE:
The vehicle identification number is used to
identify your machine.
EBU00787
Model label
The model label is affixed to the location in the
illustration. Record the information on this label in the space provided. This information will
be needed to order spare parts from your
Yamaha dealer.
1. Model label
3-3
EBU00039
CONTROL FUNCTIONS
WARNING
Indicates a potential hazard that could
result in serious injury or death.
EBU00942
Main switch
Functions of the respective switch positions
are as follows:
ON:
The engine can be started only at this position
and the headlights and taillight come on when
the light switch is on.
OFF:
All electrical circuits are switched off. The key
can be removed in this position.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
4-1
EBU00043
Indicator lights
EBU00053
Handlebar switches
1. Reverse indicator light “R”
2. Neutral indicator light “N”
EBU14930
Reverse indicator light “R”
This indicator light comes on when the drive
select lever is in reverse.
EBU00603
Neutral indicator light “N”
This indicator light comes on when the transmission is in neutral.
1. Light switch “ //OFF”
2. Engine stop switch “ / ”
3. Start switch “”
EBU12040
Light switch “ //OFF”
Set the switch to “” to turn on the low beam
and the taillight.
Set the switch to “” to turn on the high
beam and the taillight.
Set the switch to “OFF” to turn off all the lights.
4-2
CAUTION:
_
Do not use the headlights with the engine
turned off for more than thirty minutes.
The battery may discharge to the point
that the starter motor will not operate
properly. If this should happen, remove
the battery and recharge it.
_
EBU12050
Engine stop switch “ / ”
Make sure that the engine stop switch is set to
“” before starting the engine. The engine
stop switch controls ignition and can be used
at all times to stop the engine, especially in an
emergency. The engine will not start or run
when the engine stop switch is set to “”.
EBU06070
Start switch “”
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
_
See starting instructions prior to starting
the engine. (See page 6-1 for details.)
_
4-3
EBU00062
Throttle lever
Once the engine is running, movement of the
throttle lever will increase the engine speed.
Regulate the speed of the machine by varying
the throttle position. Because the throttle is
spring-loaded, the machine will decelerate,
and the engine will return to an idle any time
the hand is removed from the throttle lever.
1. Throttle lever
Before starting the engine, check the throttle
to be sure it is operating smoothly. Make sure
it returns to the idle position as soon as the lever is released.
WARNI NG
POTENTIAL HAZARD
Malfunction of throttle.
WHAT CAN HAPPEN
The throttle could be hard to operate,
making it difficult to speed up or slow
down when you need to. This could
cause an accident.
HOW TO AVOID THE HAZARD
Check the operation of the throttle lever
before you start the engine. If it does not
work smoothly, check for the cause.
Correct the problem before riding the
ATV. Consult a Yamaha dealer if you
can’t find or solve the problem yourself.
4-4
EBU01159
Speed limiter
The speed limiter keeps the throttle from fully
opening, even when the throttle lever is
pushed to the maximum. Turning in the adjusting screw limits the maximum engine power available and decreases the maximum
speed of the ATV.
1. Locknut 2. Adjusting screw
a. No more than 12 mm (0.47 in)
WARNI NG
POTENTIAL HAZARD
Improper adjustment of the speed limiter and throttle.
WHAT CAN HAPPEN
The throttle cable could be damaged.
Improper throttle operation could result.
You could lose control, have an accident or be injured.
HOW TO AVOID THE HAZARD
Do not turn the adjusting screw out
more than 12 mm (0.47 in). Always make
sure the throttle lever free play is adjusted to 2–4 mm (0.08–0.16 in). See page
8-19.
4-5
EBU00069
Clutch lever
The clutch lever is located on the left handlebar and the ignition circuit cut-off system is incorporated in the clutch lever holder. Pull the
clutch lever to the handlebar to disengage the
clutch, and release the lever to engage the
clutch. The lever should be pulled rapidly and
released slowly for smooth clutch operation.
(Refer to “Starting a cold engine” for a description of the ignition circuit cut-off system.)
1. Clutch lever
EBU00988
Brake lever
The brake lever is located on the right handlebar. Pull it toward the handlebar to apply the
front brake.
1. Brake lever
4-6
EBU00989
Brake pedal
The brake pedal is located on the right side of
the machine. Push down on the pedal to apply
the rear brake.
1. Brake pedal
4-7
EBU13870
Parking brake lever
Use the parking brake when you have to start
the engine or park the machine, especially on
a slope. To apply the parking brake, move the
parking brake lever in direction a. To release
the parking brake, move the parking brake lever in direction b.
1. Parking brake lever (Locked position)
1. Parking brake lever (Unlocked position)
4-8
Loading...