Yamaha NXN500WH, NXN500LW, NXN500BL User Manual

Network Powered Speaker

OWNER’S MANUAL

AB

English

CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.

1 To assure the finest performance, please read this manual carefully.

Keep it in a safe place for future reference.

2 Install this sound system in a well ventilated, cool, dry, clean place -

away from direct sunlight, heat sources, vibration, dust, moisture, and/
or cold. For proper ventilation, allow the following minimum
clearances.
Top: 30 cm, Rear: 30 cm

3 Locate this unit away from other electrical appliances, motors, or

transformers to avoid humming sounds.

4 Do not expose this unit to sudden temperature changes from cold to hot,

and do not locate this unit in an environment with high humidity (i.e. a
room with a humidifier) to prevent condensation inside this unit, which
may cause an electrical shock, fire, damage to this unit, and/or personal
injury.

5 Avoid installing this unit where foreign object may fall onto this unit

and/or this unit may be exposed to liquid dripping or splashing. On the
top of this unit, do not place:
– Other components, as they may cause damage and/or discoloration

on the surface of this unit.

– Burning objects (i.e. candles), as they may cause fire, damage to this

unit, and/or personal injury.

– Containers with liquid in them, as they may fall and liquid may cause

electrical shock to the user and/or damage to this unit.

6 Do not cover this unit with a newspaper, tablecloth, curtain, etc. in order

not to obstruct heat radiation. If the temperature inside this unit rises, it
may cause fire, damage to this unit, and/or personal injury.

7 Do not plug in this unit to a wall outlet until all connections are

complete.

8 Do not operate this unit upside-down. It may overheat, possibly causing

damage.

9 Do not use force on switches, knobs and/or cords.

10 When disconnecting the power cable from the wall outlet, grasp the

plug; do not pull the cable.

11 Do not clean this unit with chemical solvents; this might damage the

finish. Use a clean, dry cloth.

12 Only voltage specified on this unit must be used. Using this unit with a

higher voltage than specified is dangerous and may cause fire, damage
to this unit, and/or personal injury. Yamaha will not be held responsible
for any damage resulting from use of this unit with a voltage other than
specified.

13 To prevent damage by lightning, keep the power cable and outdoor

antennas disconnected from a wall outlet or this unit during a lightning
storm.

14 Do not attempt to modify or fix this unit. Contact qualified Yamaha

service personnel when any service is needed. The cabinet should never
be opened for any reasons.

15 When not planning to use this unit for long periods of time (i.e.

vacation), disconnect the AC power plug from the wall outlet.

16 Be sure to refer to the “Troubleshooting” section of the Owner’s

Manual for common operating errors before concluding that this unit is
faulty.

17 Before moving this unit, press

disconnect the AC power plug from the wall outlet.

18 Condensation will form when the surrounding temperature changes

suddenly. Disconnect the power cable from the outlet, then leave this
unit alone.

19 When using this unit for a long time, this unit may become warm. Turn

the power off, then leave this unit alone for cooling.

20 Install this unit near the AC outlet and where the AC power plug can be

reached easily.

A (power) to set it to standby mode and

21 The batteries shall not be exposed to excessive heat such as sunshine,

fire or the like. When you dispose of batteries, follow your regional
regulations.

22 Excessive sound pressure from earphones and headphones can cause

hearing loss.

WAR NING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

This unit is not disconnected from the AC power source as long as it
is connected to the wall outlet, even if this unit itself is turned off by

A. This state is called the standby mode. In this state, this unit is

designed to consume a very small quantity of power.

Radio waves may affect electro-medical devices. Do not use this unit
near medical devices or inside medical facilities.

Do not use this unit within 22 cm (9 inches) of persons with a heart
pacemaker implant or defibrillator implant.

There is a chance that placing this unit too close to a CRT-based
(Braun tube) TV set might impair picture color. Should this happen,
move this unit away from the TV set.

■ Notes on remote controls and batteries

• Do not spill water or other liquids on the remote control.

• Do not drop the remote control.

• Do not leave or store the remote control in the following conditions:
– places of high humidity, such as near a bath
– places of high temperatures, such as near a heater or stove
– places of extremely low temperatures
– dusty places

• Insert the battery according to the polarity markings (+ and -).

• Change all batteries if you notice the following conditions:
– the operation range of the remote control narrows
– the transmit indicator does not flash or is dim

• If the batteries run out, immediately remove them from the remote control
to prevent an explosion or acid leak.

• If you find leaking batteries, discard the batteries immediately, taking
care not to touch the leaked material. If the leaked material comes into
contact with your skin or gets into your eyes or mouth, rinse it away
immediately and consult a doctor. Clean the battery compartment
thoroughly before installing new batteries.

• Do not use old batteries together with new ones. This may shorten the life
of the new batteries or cause old batteries to leak.

• Do not use different types of batteries (such as alkaline and manganese
batteries) together. Specification of batteries may be different even
though they look the same.

• Before inserting new batteries, wipe the compartment clean.

• Dispose of batteries according to your regional regulations.

• Keep batteries away from children. If a battery is accidentally swallowed,
contact your doctor immediately.

• When not planning to use the remote control for long periods of time,
remove the batteries from the remote control.

• Do not charge or disassemble the supplied batteries.

En i

■ For U.K. customers

If the socket outlets in the home are not suitable for the plug supplied with
this appliance, it should be cut off and an appropriate 3 pin plug fitted. For
details, refer to the instructions described below.

Note

The plug severed from the mains lead must be destroyed, as a plug with
bared flexible cord is hazardous if engaged in a live socket outlet.

We, Yamaha Music Europe GmbH hereby declare that this unit is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.

Yamaha Music Europe GmbH

Siemensstr. 22-34 25462 Rellingen, Germany
Tel: [phone]

■ Special instructions for U.K. model

IMPORTANT

THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THEFOLLOWING CODE:

Blue: NEUTRAL
Brown: LIVE

As the colours of the wires in the mains lead of this apparatus may
not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N or coloured BLACK. The wire
which is coloured BROWN must be connected to the terminal which
is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth terminal of the
three pin plug.

Information for Users on Collection and
Disposal of Old Equipment and Used Batteries

These symbols on the products, packaging, and/or
accompanying documents mean that used electrical
and electronic products and batteries should not be
mixed with general household waste.
For proper treatment, recovery and recycling of old
products and used batteries, please take them to
applicable collection points, in accordance with your
national legislation and the Directives 2002/96/EC
and 2006/66/EC.

■ Bluetooth

Bluetooth is a technology for wireless communication between devices
within an area of about 10 meters (33 ft) employing the 2.4 GHz frequency
band, a band which can be used without a license.

■ Handling Bluetooth communications

• The 2.4 GHz band used by Bluetooth compatible devices is a radio band
shared by many types of equipment. While Bluetooth compatible devices
use a technology minimizing the influence of other components using the
same radio band, such influence may reduce the speed or distance of
communications and in some cases interrupt communications.

• The speed of signal transfer and the distance at which communication is
possible differs according to the distance between the communicating
devices, the presence of obstacles, radio wave conditions and the type of
equipment.

• Yamaha does not guarantee all wireless connections between this unit and
devices compatible with Bluetooth function.

By disposing of these products and batteries correctly,
you will help to save valuable resources and prevent
any potential negative effects on human health and
the environment which could otherwise arise from
inappropriate waste handling.

For more information about collection and recycling
of old products and batteries, please contact your
local municipality, your waste disposal service or the
point of sale where you purchased the items.

[Information on Disposal in other
Countries outside the European
Union]

These symbols are only valid in the European Union.
If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct
method of disposal.

Note for the battery symbol (bottom
two symbol examples):

This symbol might be used in combination with a
chemical symbol. In this case it complies with the
requirement set by the Directive for the chemical
involved.

ii En

FEATURES

PREPARATIONS
PLAYBACK

CONFIGURATIONS

APPENDIX

English

CONTENTS

Supplied accessories....................................... 4

FEATURES 5

What you can do with this unit ..................... 5

Mastering useful apps (MusicCast CONTROLLER)................5

Sources that can be played back on this unit........................5

Part names....................................................... 6

Front panel ................................................................................6

Rear panel..................................................................................7

Remote control..........................................................................8

PREPARATIONS 9

PREPARATIONS................................................ 9

1 Connecting the left and right speakers ............................9

2 Connecting the playback devices.......................................9

3 Connecting the network cables ...................................... 10

4 Preparing a wireless antenna ......................................... 10

5 Connecting the power cable............................................ 10

6 Positioning the speakers.................................................. 11

Turning on the main power.................................................. 11

Connecting to network ................................ 12

Connecting with the MusicCast CONTROLLER................... 12

Connecting without the MusicCast CONTROLLER............. 14

PLAYBACK 18

Playing back music stored on media servers

(PCs/NAS)........................................................ 18

Setting the media sharing of music files ............................ 18

Playback of PC music contents............................................. 19

Playing back music on mobile devices

(Music Play).................................................... 20

Playback of mobile device music contents ......................... 20

Listening to Internet radio .......................... 21

Selecting an Internet radio station...................................... 21

Registering favorite Internet radio stations

(bookmarks)........................................................................ 21

Registering songs stations being played

back (Preset function) .................................. 22

Registering a song/station by remote control ................... 22

Recalling a registered song/station by remote control .... 22

Playing back iPod/iTunes music via a

network (AirPlay) .......................................... 23

Playback of iPod/iTunes music contents ............................ 23

Playing back music via Bluetooth ................ 24

Registering a Bluetooth device with the unit (pairing)....... 24

Playing back audio from a Bluetooth device on the unit... 25

Disconnecting Bluetooth connection ................................... 25

Playing back music on a PC (USB DAC) ....... 26

Installing the dedicated driver (Windows only) ................. 26

Playing back music on a PC .................................................. 26

Listening to music from a playback

device ............................................................. 27

Playback from devices with an optical digital audio

output .................................................................................. 27

Playback from devices with an analog audio output ........ 27

CONFIGURATIONS 28

Updating the unit’s firmware via the

network.......................................................... 28

Updating with MusicCast CONTROLLER ............................. 28

Updating from this unit ........................................................ 28

Specifying unit settings with a web

browser .......................................................... 29

Configuring with Windows

(using a specified web browser)....................................... 29

Configuring with Mac OS ...................................................... 29

Displaying/changing settings............................................... 30

Restoring the default settings .................... 32

Restoring the default settings (Factory reset).................... 32

Restoring the default network settings .............................. 32

APPENDIX 33

Troubleshooting............................................ 33

General.................................................................................... 33

Bluetooth ......................................................................................34

Remote control....................................................................... 34

Network................................................................................... 35

Supported devices and file formats............ 36

Supported devices ................................................................. 36

File formats............................................................................. 36

Specifications ................................................ 37

Trademarks.................................................... 38

En 3

Supplied accessories

Insulation sheet *

Check that the following accessories are supplied with the product.

☐ Remote control ☐ Power cable x 2 ☐ MusicCast Setup Guide

☐ Balance cable

(3 m) x 1

☐

STP network cable (CAT-5 straight cable)
(for connecting the speakers)
(3 m) x 1

* Remove the insulation sheet of the remote control before using.

About this manual

• In this manual, iOS and Android mobile devices are collectively referred to as “mobile devices”. The specific type of mobile device is noted in
explanations as needed.

• indicates precautions for use of the unit and its feature limitations.

• indicates supplementary explanations for better use.

• Updates offering improved functionality of the dedicated “MusicCast CONTROLLER” app for mobile devices may become available without prior notice.

4 En

FEATURES

English

FEATURES

a Internet
b Streaming service

c PC
f AirPlay (iTunes)

d NAS e Music Play

f AirPlay
g Bluetooth

h PC (USB DAC) i TV/CD player etc.

(Optical)

Modem

Router*

j Portable music

player etc.
(Analog)

What you can do with this unit

Mastering useful apps (MusicCast CONTROLLER)

You can operate and program the unit, or play streaming services via this unit, by installing the free dedicated MusicCast
CONTROLLER app on a mobile device. For details, search for “MusicCast CONTROLLER” on the App Store or Google Play.

• “MusicCast CONTROLLER” supports the following mobile devices.

– iOS version 7.1 or later

– Android version 4.1 or later

MusicCast CONTROLLER capabilities

Various content and streaming services can be played.

• Play songs stored on computers (servers)

• Play music stored on mobile devices (Music Play)

• Select an Internet radio station

• Play music on streaming service

See MusicCast Setup Guide for details.

• Distribute and receive audio between the unit and other
Yamaha MusicCast supported devices

• Select the input source, and adjust the volume or mute

• Adjust the tone and L/R balance, and set a sleep timer

Sources that can be played back on this unit

* You need a commercially available wireless router (access point) when you use a mobile device.

a

Play back the Internet radio (p.21)

b

Play back the streaming service
(see the supplement for each service.)

c

Play back music files stored on your PC (p.18)

d

Play back music files stored on your NAS (p.18)

e

Play back music on mobile devices (Music Play)
(p.20)

• In order to play back from all audio sources, a mobile device installed with the dedicated “MusicCast CONTROLLER” app for mobile devices is necessary.

f

Play back music files stored on your iPod/iTunes
with AirPlay (p.23)

g

Play back audio content from
(p.24)

h

Play back audio on the PC (p.26)

i

Play back digital audio (p.27)

j

Play back analog audio (p.27)

Bluetooth

devices

En 5

FEATURES

Part names

a

b

Front panel

a

Status indicator (left speaker only)

Indicates the selected input source and unit status
depending on its color and whether it is lit or flashing. For
details, refer to the “Table of status indicator conditions”
at the back of this manual.

Orange Standby

Yellow Network standby

Green Selecting the network input or setting up a

Pink Selecting the AirPlay input or standing by for

Blue Bluetooth input

Sky blue USB input

Purple Optical digital input

White Selecting the AUX input or updating the

Red Error occurred

• If no network connection has been set up when the main power is
turned on, the indicator flashing in pink, and the unit automatically
searches for an iOS device (iPhone or iPod touch). For details on
network connections with iOS devices, see “Sharing the iOS device
setting” (p.15).

network connection

an iOS device connection

firmware

b

Remote control sensor (left speaker only)

Receives infrared signals from the remote control (p.8).

• When using multiple units in the same room, turning off reception
of the remote control signal with the web browser can prevent
interference from other remote controls (p.29).

6 En

FEATURES

English

Rear panel

L

NETWORK

USB

OPTICAL

L-R

LINK

AUX IN

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

AC IN

MAXMIN

WIRELESS
DIRECT

R

L-R

LINK

R CH

AUDIO IN

AC IN

a

b
c

d

e
f

g

h

e

g

h

i

m
n

l

k

j

Right speaker Left speaker

a

Wireless antenna

For connecting to a network device and Bluetooth device
wirelessly (p.10).

b

NETWORK jack

For connecting to a network with a network cable (p.10).

c

USB jack

For connecting to a PC with a USB cable (p.26).

d

OPTICAL jack

For connecting to audio components equipped with
optical digital output (p.27).

e

L-R LINK jack

For sending control information to the right speaker with
the supplied network cable (p.9).

f

AUX IN jack

For connecting to audio components equipped with an
analog output with a stereo mini plug cable (p.27).

g

R CH AUDIO OUT jack / R CH AUDIO IN jack

For sending audio to the right speaker with the supplied
balance cable (p.9).

h

AC IN jack

For connecting the supplied power cable (p.10).

i

WIRELESS switch

Turns on/off wireless communications (wireless
connection and Bluetooth).

AUTO Enables wireless communications.

OFF Disables wireless communications. Make a wired

connection to connect to the network.

• When the unit is turned on, the wireless connection enters standby
mode. If a wireless connection will not be used, set the WIRELESS switch
to “OFF”.

j

CONNECT

Lets you operate the unit with the dedicated “MusicCast
CONTROLLER” app for mobile devices (p.12).

k

WIRELESS DIRECT

Establishes a wireless connection directly with a mobile
device or Wi-Fi-capable PC (p.17).

l

SOURCE

Selects the input source. Each press of this button
switches the input source. The selected input source is
indicated by the status indicator on the front panel (p.6).

mz (power) switch

Turns on/off the main power.

n

GAIN knob

Sets the maximum volume that the speakers can output.
Adjust the maximum volume according to the playback
device.

• When adjusting the maximum volume, play the audio from the playback
device at its maximum volume, and then adjust the GAIN knob to play
back at the desired volume.

En 7

FEATURES

Remote control

a

b

c

d f

e

Approximately
6 m (20 ft)

CR2025 type
lithium battery

a

Input source selection keys

Select the input source for playback. The selected input
source is indicated by the status indicator on the front
panel (p.6).

(Bluetooth)

NET Network input

USB USB jack

OPT OPTICAL jack

AUX AUX jack

Bluetooth input

ez (power)

Turns on/off (standby) the unit.

• To turn the main power on/off, use the z (power) switch on the rear

panel (p.7).

f

CONNECT

Lets you operate the unit with the dedicated “MusicCast
CONTROLLER” app for mobile devices (p.12).

■ Operating by remote control

• To select network content, use the dedicated “MusicCast CONTROLLER”
app for mobile devices. When NET is pressed, the previously played
network content will be played back.

b

Volume adjustment keys

+/– Adjust the volume for playback.

(mute)

• To set the maximum volume, adjust the GAIN knob on the rear panel
(p.7).

c

PRESET

Registers (presets) PC/NAS albums or songs, Internet
radio stations and streaming stations on this unit. After a
song/station is registered, it can be played back by simply
pressing this key (p.22).

d

WPS

Sets up a wireless connection to the network (p.16).

• In order to connect to the network using WPS, a wireless router (or
access point) with the WPS function is required.

Mutes the speaker output.

Use the remote control by directing it toward the remote
control sensor on the left speaker.

■ Replacing the battery

• Check the “+” of the battery and insert it the correct way
around.

• While pushing the release tab in direction Ⓐ, slide out the
battery holder in direction Ⓑ.

8 En

PREPARATIONS

English

PREPARATIONS

L

NETWORK

USB

OPTICAL

L-R
LINK

AUX IN

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

AC IN

MAXMIN

WIRELESS
DIRECT

R

L-R
LINK

R CH

AUDIO IN

AC IN

L-R

LINK

L-R

LINK

R CH

AUDIO IN

R CH

AUDIO OUT

Right speaker

Left speaker

Connect with the supplied

network cable.

Connect with the supplied

balance cable.

L

NETWORK

USB

OPTICAL

L-R

LINK

AUX IN

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

AC IN

MAXMIN

WIRELESS
DIRECT

PC

TV/CD player etc.

Portable music player etc.

USB cable

Optical cable

Stereo mini plug cable

Left speaker

PREPARATIONS

Connecting the left and right speakers

1

Use the supplied cables to connect the left and right speakers.

• If the left and right speakers are not connected, they will not function.

• Do not use any cable other than those supplied.

Connecting the playback devices

2

En 9

PREPARATIONS

Connecting the network cables

L

NETWORK

USB

OPTICAL

L-R
LINK

AUX IN

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

AC IN

MAXMIN

WIRELESS
DIRECT

NETWORK

LAN

WAN

Internet

Modem

Mobile device

(such as iPhone)

Router

Network Attached

Storage (NAS)

PC

Left speaker

Hold the base of the
antenna while raising it to
its upright position.

L

NETWORK

USB

OPTICAL

L-R
LINK

AUX IN

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

AC IN

MAXMIN

WIRELESS
DIRECT

R

L-R
LINK

R CH

AUDIO IN

AC IN

Right speaker Left speaker

To an AC wall outlet To an AC wall outlet

3

Connect the unit to your router with a commercially-available STP network cable (CAT-5 or higher straight cable).

Select whether to use a wired network connection or a wireless network connection, depending on your network environment.
For details, refer to “Connecting to network” (p.12).

Preparing a wireless antenna

4

Raise the wireless antenna on the back of the left speaker.

• Do not apply excessive force on the antenna. Doing so may damage it.

• Be sure to check the direction in which the antenna moves, and angle it
in the proper direction.

• Do not remove the antenna.

Connecting the power cable

5

Connect the supplied power cable to the AC IN jack on the
rear panel, and then insert the power plug into an AC wall
outlet.

10 En

PREPARATIONS

English

Positioning the speakers

Right speakerLeft speaker

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

MAXMIN

WIRELESS
DIRECT

Left speaker (rear panel) Left speaker (front panel)

z (power) switch Pink

6

• Place each speaker on a sturdy and stable surface.

• When connecting to a TV, place the speakers to the left and
right of the TV.

• The ideal stereo effect will be obtained by slightly angling
the front panels in toward the listener.

• When used near a CRT TV, separate the speakers from the TV if color
distortions or noise occur.

Turning on the main power

After all cables have been connected, press the z (power)
switch on the rear panel to turn on the main power of the
unit.

■ Network standby

The network function can be enabled, even when the unit is
in standby mode (network standby).

If network standby is turned off, the unit can enter standby
mode using the minimum standby power (eco standby).

Use the web browser on the PC to change the network
standby setting (p.29).

• (U.K. model only) As a default, network standby is set to “Auto”. If the unit
has been disconnected from the network for 8 hours while it is in
network standby mode, it switches to eco standby mode.

■ Auto power standby

If no operation is performed or nothing is played back, the
unit will automatically enter standby mode (auto power
standby).

MusicCast CONTROLLER can be used to change the auto
power standby setting.

Standby time with no operation

All inputs: 8 hours

Standby time with no playback

Network, Bluetooth and USB: 20 minutes

Default setting : On (U.K. model) / Off (Australia model)

• If no network connection has been set up when the main power is
turned on, the indicator flashing in pink, and the unit automatically
searches for an iOS device (iPhone or iPod touch). For details on network
connections with iOS devices, see “Sharing the iOS device setting” (p.15).

After the main power for the unit has been turned on, the
unit can be turned on or switched to standby by using z
(power) on the remote control.

To turn on/off the unit with the MusicCast CONTROLLER, the
network function must be enabled, even when the unit is in
standby mode (network standby).

For details on network standby, refer to the following section.

En 11

PREPARATIONS

Connecting to network

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

AC IN

MAXMIN

WIRELESS
DIRECT

Left speaker (rear panel)

WIRELESS switch

Green (flashing)

Left speaker (front panel)

CONNECT

Remote control

R CH

AUDIO OUT

AUTO

OFF

WIRELESS

CONNECT

SOURCE

GAIN

AC IN

MAXMIN

WIRELESS
DIRECT

Left speaker (rear panel)

CONNECT

• Some security software installed on your PC or the firewall settings of network devices (such as a router) may block the access of the unit to the network
devices or the Internet. In these cases, configure the security software or firewall settings appropriately.

• A connection cannot be established if the MAC address filter is enabled on the router. Check the router settings.

• Each server must be connected to the same subnet as the unit.

• To use the service via the Internet, broadband connection is strongly recommended.

Connecting with the MusicCast CONTROLLER

In order to use a mobile device installed with the dedicated
“MusicCast CONTROLLER” app, simply follow the instructions
in the MusicCast CONTROLLER screen to specify the network
settings.

When playing a high-resolution audio source via the network, we
recommend connecting with a wired router for stable playback.

• Connect the mobile device in which the “MusicCast CONTROLLER” app
has been installed to the wireless router (access point) in advance.

• If this unit will not be connected to the Internet, streaming services such
as Internet radio cannot be used. To use streaming services, connect the
unit to a Internet with a wired router or wireless router (access point).

Perform the setup according to the network

1

connection method (wired or wireless).

When connecting to the network using a cable:

Make sure that the unit is connected to the router with a
cable.

When connecting to the network wirelessly:

If a wired connection has already been established,
disconnect the network cable from the unit.

Set the WIRELESS switch on the rear panel to

2

“AUTO”.

Follow the procedure in the MusicCast

4

CONTROLLER screen to turn on the unit.

While the connection is being set up, the status indicator
on the front panel flashes in green.

Hold down CONNECT on the remote control (or

5

CONNECT on the rear panel) for at least 3
seconds.

Start up the MusicCast CONTROLLER app on the

3

mobile device, and then tap “Setup”.

If you have already connected a another MusicCast
compatible device to the network, tap “Settings” and
then “Add New Device”.

12 En