Yamaha IL1115, IH2000, IF3115 User Manual



SPEAKER SYSTEM

Installation Series

IF3115/64(W), IF3115/95(W),

IH2000/64(W), IH2000/95(W),

IL1115(W)

OWNER'S MANUAL

EnglishDeutschFrançaisEspañol日本語

Thank you for choosing this Yamaha speaker system. In order to take maximum

advantage of the speaker's features and ensure optimum performance and longevity,

please read this manual carefully before using the speaker system. Keep the manual

in safe place for future reference.

BEDIENUNGSANLEITUNG

Vielen Dank für die Auswahl dieses Lautsprechersystems von Yamaha. Damit Sie die

Eigenschaften dieses Lautsprechers optimal nutzen können, und um maximale

Leistung und Lebensdauer sicherzustellen, lesen Sie bitte vor der Inbetriebnahme

diese Anleitung sorgfältig durch. Bitte bewahren Sie diese Anleitung zum späteren

Nachschlagen an einem sicheren Ort auf.

MODE D’EMPLOI

Nous vous remercions d'avoir acheté ces enceintes Yamaha. Pour obtenir les

performances optimales de vos enceintes et garantir une longévité maximale, lisez

attentivement ce mode d'emploi avant d'utiliser les enceintes. Conservez-le en lieu

sûr pour pouvoir vous y référer ultérieurement.

MANUAL DE INSTRUCCIONES

Gracias por escoger este sistema de altavoces Yamaha. A fin de aprovechar al

máximo las características de los altavoces y obtener un rendimiento y durabilidad

óptimos, lea atentamente este manual antes de utilizar el sistema. Guarde este

manual en un lugar seguro para futuras consultas.

取扱説明書

このたびは、ヤマハ製品をお買い求めいただきまして、まことにありがとうございます。

スピーカーの優れた性能を十分に生かして、末永くご愛用いただくために、この取扱説明書をご使用の

前に必ずお読みください。

PRECAUTIONS

PLEASE READ CAREFULLY BEFORE PROCEEDING

* Please keep this manual in a safe place for future reference.

CAUTION

Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property. These precautions include, but are not limited to, the following:

English

Location

• Always consult qualiﬁed Yamaha service personnel if the device installation requires construction work, and make sure to observe the following precautions.

- Choose mounting hardware and an installation location that

-Avoid locations that are exposed to constant vibration.

- Make sure to use the speciﬁed hardware.

- Inspect the device periodically.

• When transporting or moving the device, always use two or more people. Attempting to lift the device by yourself may damage your back, result in other injury, or cause damage to the device itself.

• Before moving the device, remove all connected cables.

• Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of panel disﬁguration or damage to the internal components.

• Do not place the device in an unstable position where it might accidentally fall over.

Connections

• Before connecting the device to other devices, turn off the power for all devices. Before turning the power on or off for all devices, set all volume levels to minimum.

• Use only speaker cables for connecting speakers to the speaker jacks. Use of other types of cables may result in ﬁre.

• Be sure to observe the ampliﬁer’s rated load impedance (see page 14), particularly when connecting speakers in parallel. Connecting an impedance load outside the ampliﬁer's rated range can damage the ampliﬁer.

can support the weight of the device.

Handling caution

• When choosing a power ampliﬁer to use with your speakers, make sure that its power output matches the speakers’ power capacity (refer to the Speciﬁcations on page 14). Even if the ampliﬁer’s power output is lower than the speakers’ power capacity, the speakers may be damaged when clipping of a high input signal occurs. The following may cause damage to speakers:

- Feedback caused when using a microphone.

- Continuous high sound pressure level produced by electronic

instruments.

- Continuous high-power output of distorted signals.

- Popping noises caused by turning on equipment, or by

connecting or disconnecting system components while the ampliﬁer is turned on.

• When turning on the AC power in your audio system, always turn on the power ampliﬁer LAST, to avoid speaker damage. When turning the power off, the power ampliﬁer should be turned off FIRST for the same reason.

• Do not operate this device at high volume levels or at a level that is uncomfortable, since it is capable of producing sound levels that could cause permanent hearing loss. If you experience any discomfort or ringing in the ears, or suspect an hearing loss, you should consult an audiologist.

Yamaha cannot be held responsible for damage caused by improper use or modiﬁcations to the device.

* Illustrations herein are for explanatory purposes only, and

may not match actual appearance during operation.

* Company names and product names herein are trademarks

or registered trademarks of their respective companies.

IF3115/IH2000/IL1115

For details on signal processor settings when driving speakers with the use of multiple power ampliﬁers, please refer to the web site below.

Yamaha Pro Audio global web site

http://www.yamahaproaudio.com/

Owner’s Manual

(6)-1

+ 4 hidden pages