(F11) Drum/key Assignment List / Liste der Tastenzuordnungen der Schlaginstrumente /
Liste d’assignation instrument de batterie/touche du clavier / Lista de asignación de teclas/batería
Bank Select MSB (0-127)127127127127127127127
Bank Select LSB (0-127)000000 0
Program Change (0-127)01816242527
Program Change (1-128)12917252628
MIDIKeyboard
Note# Note
13C#-1C#03SURDO MUTE
14D-1D03SURDO OPEN
15D#-1D#0HI Q
16E-1E0WHIP SLAP
17F-1F04SCRATCH H
18F#-1F#04SCRATCH L
19G-1G0FINGER SNAPFINGER SNAP
20 G#-1G#0CLICK NOISE
21A-1A0MTRNM CLICK
22A#-1A#0MTRNM BELL
23B-1B0SEQ CLICK L
24C0C1SEQ CLICK H
25C#0C#1BRUSH TAP
26D0D1
27D#0D#1BRUSH SLAP
28E0E1
29F0F1
30F#0F#1CASTANET
31G0G1SNARE SOFTSNARE SOFT 2
32G#0G#1STICKS
33A0A1KICK SOFT
34A#0A#1OPEN RIM SHTRIM H SHORT
35B0B1KICK TIGHT
36C1C2KICKKICK SHORT
37C#1C#2SIDE STICKSTICK LIGHT
38D1D2SNARESNARE SHORTSNARE SNAPPYSNARE ROCKSNR NOISY 2SNARE ANALOG SNARE CLAP
39D#1D#2HAND CLAP
40E1E2SNARE TIGHTSNARE TITE HSNR TITE SNPSN ROCK TITESNR NOISY 3SNR ANALOG2SNARE DRY
41F1F2FLOOR TOM L
42F#1F#21HI-HAT CLOSE
43G1G2FLOOR TOM H
44G#1G#21HI-HAT PEDAL
45A1A2LOW TOM
46A#1A#21HI-HAT OPEN
47B1B2MID TOM L
48C2C3MID TOM H
49C#2C#3CRASH CYMBL1
50D2D3HIGH TOM
51D#2D#3RIDE CYMBL 1
52E2E3CHINESE CYM
53F2F3RIDE CYM CUP
54F#2F#3TAMBOURINE
55G2G3SPLASH CYM
56G#2G#3COWBELL
57A2A3CRASH CYMBL2
58A#2A#3VIBRASLAP
59B2B3RIDE CYMBL 2
60C3C4BONGO H
61C#3C#4BONGO L
62D3D4CONGA H MUTE
63D#3D#4CONGA H OPEN
64E3E4CONGA L
65F3F4TIMBALE H
66F#3F#4TIMBALE L
67G3G4AGOGO H
68G#3G#4AGOGO L
69A3A4CABASA
70A#3A#4MARACAS
71B3B4
72C4C5
73C#4C#5GUIRO SHORT
74D4D5
75D#4D#5CLAVES
76E4E5WOOD BLOCK H
77F4F5WOOD BLOCK L
78F#4F#5CUICA MUTE
79G4G5CUICA OPEN
80G#4G#52TRIANGLE MT
81A4A52TRIANGLE OPN
82A#4A#5SHAKER
83B4B5JINGLE BELLS
84C5C6BELL TREE
85C#5(C#6)
86D5(D6)
87D#5(D#6)
88E5(E6)
89F5(F6)
90F#5(F#6)
91G5(G6)
Note
Key Off
(*1)
●
●
●
●
Alternate
Group (*2)
Standard Kit 1Standard Kit 2Room Kit Rock Kit Electro Kit Analog Kit Dance Kit
CLICK NOISE
DANCE PERC 1
REVERS DNC 1
DANCE PERC 2
HI Q DANCE 1
BRUSH SWIRL
BRSH TP SWRLREVERS CYMBLREVERS CYMBLREVERS CYMBL
SNARE ROLL
SNARE NOISYSN SNP ELCTRSNR NOISY 4SNARE TECHNO
KICK 2KICK GATEKICK AN SHRTKCK TECHNO L
KICK GATEKCK GATE HVYKICK ANALOGKICK TECHNO
TOM ROOM 1TOM ROCK 1TOM ELECTRO1TOM ANALOG 1TOM ANALOG 1
TOM ROOM 2TOM ROCK 2TOM ELECTRO2TOM ANALOG 2TOM ANALOG 2
TOM ROOM 3TOM ROCK 3TOM ELECTRO3TOM ANALOG 3TOM ANALOG 3
TOM ROOM 4TOM ROCK 4TOM ELECTRO4TOM ANALOG 4TOM ANALOG 4
TOM ROOM 5TOM ROCK 5TOM ELECTRO5TOM ANALOG 5TOM ANALOG 5
TOM ROOM 6TOM ROCK 6TOM ELECTRO6TOM ANALOG 6TOM ANALOG 6
SAMBA WHSL H
SAMBA WHSL LSAMBA WHSL L
GUIRO LONG
HI Q 2HI Q 2HI Q 2
KICK 3KICK 3KCK TECHNO Q
SIDE STCK ANSIDE STCK AN
HH CLOSE ANHI-HAT CLS 3
HAT CLS AN2HAT CLS AN 3
HATOPEN ANHI-HAT OPN 3
CRASH ANALOG CRASH ANALOG
COWBELL ANLG COWBELL DNC
CONGA ANLG H CONGA ANLG H
CONGA ANLG M CONGA ANLG M
CONGA ANLG LCONGA ANLG L
MARACAS 2MARACAS 2
CLAVES 2CLAVES 2
SCRATCH H 2SCRATCH H 2DANCE BRTH 1
SCRATCH L 2SCRATCH L 2DANCE BRTH 2
SNR ANALOG 3
VINYL NOISE
SNR ANALOG 4
REVERS DNC 2
SNARE DANCE1
RIM GATE
DANCE CLAP
RIDE CYMBL 1
CHINESE CYM
RIDE CYM CUP
TMBL ANALOG
SPLASH CYM
CRASH CYMBL2
VIBRASLAP AN
RIDE ANALOG
BONGO ANLG H
BONGO ANLG L
TIMBALE H
TIMBALE L
AGOGO H
AGOGO L
CABASA
SAMBA WHSL H
GUIRO SHORT
GUIRO LONG
DANCE PERC 3
DANCE PERC 4
TRIANGLE MT
TRIANGLE OPN
SHAKER
JINGLE BELLS
BELL TREE
Same as Standard Kit 1No Sound
*1 Key Off: Keys marked “●” stop sounding the instant they are released.
*2 Alternate Group: Playing any instrument within a numbered group will immediately stop the sound of any other instrument in the same group of the same number.
F11/F01 Data List
●
●
(F11) Drum/key Assignment List / Liste der Tastenzuordnungen der Schlaginstrumente / Liste d’assignation instrument de batterie/touche du clavier / Lista de asignación de teclas/batería
Bank Select MSB (0-127)127127127127126126
Bank Select LSB (0-127)000000
Program Change (0-127)3240488601
Program Change (1-128)3341498712
MIDIKeyboard
Note# Note
13C#-1C#03
14D-1D03
15D#-1D#0
16E-1E0
17F-1F04
18F#-1F#04
19G-1G0
20 G#-1G#0
21A-1A0
22A#-1A#0
23B-1B0
24C0C1
25C#0C#1
26D0D1●
27D#0D#1
28E0E1
29F0F1
30F#0F#1
31G0G1SNARE JAZZ HBRUSH SLAP 2SNARE STUDIO L STEREO
32G#0G#1
33A0A1KICK SOFT 2KICK AMB H
34A#0A#1RIM SHT LITEOPEN RIM SHT
35B0B1GRAN CASSAKICK AMB L
36C1C2KICK JAZZKICK JAZZGRAN CASSA M KICK STUDIO STEREOCUT NOISEPHONE CALL
37C#1C#2STICK LIGHTSTICK LIGHTSIDE STICKSIDE STCKCUT NOISE2DOOR SQUEAK
38D1D2SNARE JAZZ LBRUSH SLAP 3BAND SNARESNARE STUDIO M STEREO
39D#1D#2
40E1E2SNARE JAZZ MBRUSH TAP 2BAND SNARE 2SNARE STUDIO L STEREO
41F1F2
42F#1F#21
43G1G2
44G#1G#21
45A1A2TOM BRUSH 3
46A#1A#21
47B1B2TOM BRUSH 4
48C2C3TOM BRUSH 5
49C#2C#3HAND CYMBAL
50D2D3TOM BRUSH 6
51D#2D#3HND CYM SHRT
52E2E3FL.KEY CLICKCAR ENGNE
53F2F3
54F#2F#3
55G2G3
56G#2G#3
57A2A3
58A#2A#3
59B2B3
60C3C4
61C#3C#4
62D3D4
63D#3D#4
64E3E4
65F3F4
66F#3F#4
67G3G4
68G#3G#4SHOWERLAUGH
69A3A4
70A#3A#4
71B3B4
72C4C5●
73C#4C#5
74D4D5
75D#4D#5
76E4E5
77F4F5
78F#4F#5
79G4G5
80G#4G#52
81A4A52
82A#4A#5
83B4B5
84C5C6DOGMACHINE GUN
85C#5(C#6)
86D5(D6)
87D#5(D#6)
88E5(E6)
89F5(F6)
90F#5(F#6)GHOST
91G5(G6)MAOU
Note
Key Off
(*1)
●
●
Alternate
Group (*2)
Jazz Kit Brush KitSymphony Kit Live! Studio KitSFX Kit 1SFX Kit 2
*1 Key Off: Keys marked “●” stop sounding the instant they are released.
*2 Alternate Group: Playing any instrument within a numbered group will immediately stop the sound of any other instrument in the same group of the same number.
F11/F01 Data List
8
9
(F11) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
Many MIDI messages listed in the MIDI Data Format are expressed in decimal numbers, binary numbers and hexadecimal numbers.
Hexadecimal numbers may include the letter “H” as a suffix. Also, “n” can freely be defined as any whole number.
To enter data/values, refer to the table below.
Decimal HexadecimalBinary
0000000 0000
1010000 0001
2020000 0010
3030000 0011
4040000 0100
5050000 0101
6060000 0110
7070000 0111
8080000 1000
9090000 1001
100A0000 1010
110B0000 1011
120C0000 1100
130D0000 1101
140E0000 1110
150F0000 1111
16100001 0000
17110001 0001
18120001 0010
19130001 0011
20140001 0100
21150001 0101
22160001 0110
23170001 0111
24180001 1000
25190001 1001
261A0001 1010
271B0001 1011
281C0001 1100
291D0001 1101
301E0001 1110
311F0001 1111
• Except the table above, for example 144-159 (decimal)/9nH/1001 0000-1001 1111 (binary) denotes the Note On Message for each channel (1-16). 176-191/BnH/1011 0000-1011 1111
denotes the Control Change Message for each channel (1-16). 192-207/CnH/ 1100 0000-1100 1111 denotes the Program Change Message for each channel (1-16). 240/F0H/1111 0000
denotes the start of a System Exclusive Message. 247/F7H/1111 0111 denotes the end of a System Exclusive Message.
• aaH (hexadecimal)/0aaaaaaa (binary) denotes the data address. The address contains High, Mid, and Low.
• bbH/0bbbbbbb denotes the byte count.
• ccH/0ccccccc denotes the check sum.
• ddH/0ddddddd denotes the data/value.
Decimal HexadecimalBinary
32200010 0000
33210010 0001
34220010 0010
35230010 0011
36240010 0100
37250010 0101
38260010 0110
39270010 0111
40280010 1000
41290010 1001
422A0010 1010
432B0010 1011
442C0010 1100
452D0010 1101
462E0010 1110
472F0010 1111
48300011 0000
49310011 0001
50320011 0010
51330011 0011
52340011 0100
53350011 0101
54360011 0110
55370011 0111
56380011 1000
57390011 1001
583A0011 1010
593B0011 1011
603C0011 1100
613D0011 1101
623E0011 1110
633F0011 1111
Decimal HexadecimalBinary
64400100 0000
65410100 0001
66420100 0010
67430100 0011
68440100 0100
69450100 0101
70460100 0110
71470100 0111
72480100 1000
73490100 1001
744A0100 1010
754B0100 1011
764C0100 1100
774D0100 1101
784E0100 1110
794F0100 1111
80500101 0000
81510101 0001
82520101 0010
83530101 0011
84540101 0100
85550101 0101
86560101 0110
87570101 0111
88580101 1000
89590101 1001
905A0101 1010
915B0101 1011
925C0101 1100
935D0101 1101
945E0101 1110
955F0101 1111
Decimal HexadecimalBinary
96600110 0000
97610110 0001
98620110 0010
99630110 0011
100640110 0100
101650110 0101
102660110 0110
103670110 0111
104680110 1000
105690110 1001
1066A0110 1010
1076B0110 1011
1086C0110 1100
1096D0110 1101
1106E0110 1110
1116F0110 1111
112700111 0000
113710111 0001
114720111 0010
115730111 0011
116740111 0100
117750111 0101
118760111 0110
119770111 0111
120780111 1000
121790111 1001
1227A0111 1010
1237B0111 1011
1247C0111 1100
1257D0111 1101
1267E0111 1110
1277F0111 1111
Program Change
If you assign Program Change numbers using numbers 0 through 127, subtract one (1) from a Program change number (P.C. #) listed above. For example, if you wish to change to a Program
with the P.C. #1, specify number 0. When program change reception is turned OFF, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received.
Voice NameMSBLSBP.C.# (1-128)
G. PIANO 101221
VARIATION01231
G. PIANO 201121
VARIATION01122
E.PIANO 101226
VARIATION012289
E.PIANO 201225
VARIATION01235
HARPSI.01227
VARIATION01237
Voice NameMSBLSBP.C.# (1-128)
ORGAN 1012320
VARIATION012220
ORGAN 2012217
VARIATION012317
STRINGS012249
VARIATION012550
VIB./GTR.012212
VARIATION012225
BASS012233
VARIATION012234
P.C.#=Program Change number
F11/F01 Data List
●
●
●
●
●
●
●
●
(F11) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
MIDI CHANNEL MESSAGE (1)
MIDI EventsStatus byte1st Data byte2nd Data byteVoiceMIDI ReceptionMIDI
Transmission: Part1...16
(0...15)
AD (64)
OFF (127)
05(=DELAY L,C,R)
00
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
Depends on Variation TypeOOOXOX
40OOOXOX
00OOOXOX
00OOOXOX
7FOOOXOX
[MIDI][Internal Sequencer]
(Right)/
Voice2/Left
Transmission
Voice1
(Right)/
Voice2/Left
SongVoice1
OOOXO O
PLAYREC
PLAYVoice1(Right)/Voice2/
Left
MIDI Parameter Change table (MULTI EQ)
Address (H) Size (H)Data
02 40 00100-04 EQ TYPEflat, jazz, pops, rock, classic* The MULTI EQ Parameter
01134-4C EQ GAIN1-12...0...+12[dB]OOOXXX
02104-28 EQ FREQUENCY132...2.0k[Hz]OOOXXX
03101-78 EQ Q10.1...12.0OOOXXX
04100-01 EQ SHAPE1shelving, peakingOOOXXX
05134-4C EQ GAIN2-12...0...+12[dB]OOOXXX
0610E-36 EQ FREQUENCY2100...10.0k[Hz]OOOXXX
07101-78 EQ Q20.1...12.0OOOXXX
081NOT USED––––– –
09134-4C EQ GAIN3-12...0...+12[dB]OOOXXX
0A10E-36 EQ FREQUENCY3100...10.0k[Hz]OOOXXX
0B101-78 EQ Q30.1...12.0OOOXXX
0C1NOT USED––––– –
0D134-4C EQ GAIN4-12...0...+12[dB]OOOXXX
0E10E-36 EQ FREQUENCY4100...10.0k[Hz]OOOXXX
0F101-78 EQ Q40.1...12.0OOOXXX
101NOT USED––––– –
11134-4C EQ GAIN5-12...0...+12[dB]OOOXXX
1211C-3A EQ FREQUENCY50.5k...16.0k[Hz]OOOXXX
13101-78 EQ Q50.1...12.0OOOXXX
14100-01 EQ SHAPE5shelving, peakingOOOXXX
TOTAL SIZE15
(H)
ParameterDescriptionVoiceMIDI ReceptionMIDI
cannot be reset to its
factory setting with XG
SYSTEM ON.
[MIDI][Internal Sequencer]
(Right)/
Voice2/Left
Transmission
Voice1
(Right)/
Voice2/Left
SongVoice1
OOOXX X
PLAYREC
PLAYVoice1(Right)/Voice2/
Left
F11/F01 Data List
13
(F11) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
MIDI Parameter Change table (EFFECT2)
Address (H)Size
03 n 00200-7
02100-7F INSERTION EFFECT PARAMETER 1OOOOOX
03100-7F INSERTION EFFECT PARAMETER 2OOOOOO
04100-7F INSERTION EFFECT PARAMETER 3OOOOOX
05100-7F INSERTION EFFECT PARAMETER 4OOOXOX
06100-7F INSERTION EFFECT PARAMETER 5OOOXOX
07100-7F INSERTION EFFECT PARAMETER 6OOOXOX
08100-7F INSERTION EFFECT PARAMETER 7OOOXOX
09100-7F INSERTION EFFECT PARAMETER 8OOOXOX
0A100-7F INSERTION EFFECT PARAMETER 9OOOXOX
0B100-7F INSERTION EFFECT PARAMETER 10OOOOOO
0C100-7F INSERTION EFFECT PART NUMBERReception: Part1...16 (0...15)
0D100-7F MW INSERTION CONTROL DEPTH-64...0...+63OOOXOX
0E100-7F BEND INSERTION CONTROL DEPTH-64...0...+63OOOXOX
0F100-7F CAT INSERTION CONTROL DEPTH-64...0...+63OOOXOX
10100-7F AC1 INSERTION CONTROL DEPTH-64...0...+63OOOXOX
11100-7F AC2 INSERTION CONTROL DEPTH-64...0...+63OOOXOX
TOTAL SIZE12
20100-7F INSERTION EFFECT PARAMETER 11OOOXOX
21100-7F INSERTION EFFECT PARAMETER 12OOOXOX
22100-7F INSERTION EFFECT PARAMETER 13OOOXOX
23100-7F INSERTION EFFECT PARAMETER 14OOOXOX
24100-7F INSERTION EFFECT PARAMETER 15OOOXOX
25100-7F INSERTION EFFECT PARAMETER 16OOOXOX
TOTAL SIZE6
30200-7F
32200-7F
34200-7F
36200-7F
38200-7F
3A200-7F
3C200-7F
3E200-7F
40200-7F
42200-7F
TOTAL SIZE14
The second byte of the address is considered as an Insertion effect number
n: insertion effect number
n=0-2
For effect types that do not require MSB, the Parameters for Address 02-0B will be received and the Parameters for Address 30-42 will not be received.
For effect types that require MSB, the Parameters for Address 30-42 will be received and the Parameters for Address 02-0B will not be received.
When bulk dumps that include Effect Type data are transmitted, the parameters for addresses 02-0B will always be transmitted.
For effects that require MSB however, when a bulk dump is received, the parameters for addresses 02-0B will not be received.
Data
(H)
(H)
INSERTION EFFECT TYPE MSB
00-7F
INSERTION EFFECT TYPE LSB
INSERTION EFFECT PARAMETER 1 MSB
00-7F
INSERTION EFFECT PARAMETER 1 LSB
INSERTION EFFECT PARAMETER 2 MSB
00-7F
INSERTION EFFECT PARAMETER 2 LSB
INSERTION EFFECT PARAMETER 3 MSB
00-7F
INSERTION EFFECT PARAMETER 3 LSB
INSERTION EFFECT PARAMETER 4 MSB
00-7F
INSERTION EFFECT PARAMETER 4 LSB
INSERTION EFFECT PARAMETER 5 MSB
00-7F
INSERTION EFFECT PARAMETER 5 LSB
INSERTION EFFECT PARAMETER 6 MSB
00-7F
INSERTION EFFECT PARAMETER 6 LSB
INSERTION EFFECT PARAMETER 7 MSB
00-7F
INSERTION EFFECT PARAMETER 7 LSB
INSERTION EFFECT PARAMETER 8 MSB
00-7F
INSERTION EFFECT PARAMETER 8 LSB
INSERTION EFFECT PARAMETER 9 MSB
00-7F
INSERTION EFFECT PARAMETER 9 LSB
INSERTION EFFECT PARAMETER 10 MSB
00-7F
INSERTION EFFECT PARAMETER 10 LSB
ParameterDescriptionVoiceMIDI ReceptionMIDI
* The EFFECT 2
Parameter cannot
be reset to its
factory setting
with XG SYSTEM
ON.
Transmission: Part1...16
(0...15)
AD (64)
OFF (127)
[MIDI][Internal Sequencer]
(Right)/
Voice2/Left
Transmission
Voice1
(Right)/
Voice2/Left
SongVoice1
OOOO O O
OOOO O X
OOOX O X
OOOX O X
OOOX O X
OOOX O X
OOOX O X
OOOX O X
OOOX O X
OOOX O X
OOOX O X
OOOX O X
PLAYREC
PLAYVoice1(Right)/Voice2/Left
F11/F01 Data List
14
(F11) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
MIDI Parameter Change table (MULTI PART)
Address (H) Size
08 nn 00100-20 ELEMENT RESERVE0...32part10,26=0, other parts=2––––––
n: Drum Setup Number (0-1)
rr: note number (0D-5B)
In the following cases, the instrument will initialize all Drum Setups.
· XG SYSTEM ON received
· GM SYSTEM ON received
· GM LEVEL2 SYSTEM ON received
· GS RESET received
· DRUM SETUP RESET received (only when in XG mode)
[Note]
When a part to which a Drum Setup is assigned receives a program change, the assigned Drum Setup will be initialized.
If the same Drum Setup is assigned to two or more parts, changes in Drum Setup parameters (including program changes) will apply to all parts to which it is assigned.
FREQUENCY
-64...0...+6340O (Drum only)O (Available only for song parts)XOX
[MIDI][Internal Sequencer]
SongVoice1(Right)/
Voice2/Left
Transmission
Voice1(Right)/
Voice2/Left
PLAYREC
PLAYVoice1(Right)/Voice2/Left
F11/F01 Data List
17
(F11) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
11110000F0 = Exclusive status
011111117F = Universal Real Time
0xxxnnnnXN =When N is received N=0-F,whichever is received. X=ignored
0000010004 = Sub-ID #1=Device Control Message
0000000101 = Sub-ID #2=Master Volume
0sssssssSS = Volume LSB
0tttttttTT = Volume MSB
11110111F7 = End of Exclusive
11110000F0 = Exclusive status
011111117F = Universal Real Time
0xxxnnnnXN = When N is received N=0-F,whichever is received. X=ignored
0000010004 = Sub-ID #1=Device Control Message
0000001103 = Sub-ID #2=Master Fine Tuning
0sssssssSS = Fine Tuning LSB
0tttttttTT = Fine Tuning MSB
11110111F7 = End of Exclusive
11110000F0 = Exclusive status
011111117F = Universal Real Time
0xxxnnnnXN = When N is received N=0-F,whichever is received. X=ignored
0000010004 = Sub-ID #1=Device Control Message
0000010004 = Sub-ID #2=Master Coarse Tuning
0000000000
0tttttttTT = Coarse Tuning MSB
11110111F7 = End of Exclusive
11110000F0 = Exclusive status
011111117F = Universal Real Time
0xxxnnnnXN = When N is received N=0-F,whichever is received. X=ignored
00000100 04 = Sub-ID #1=Device Control Message
00000101 05 = Sub-ID #2=Global Parameter Control
00000001 01 = Slot path length = 1
00000001 01 = Parameter ID width = 1
00000001 01 = Value width = 1
00000001 01 = Slot path MSB = 1
00000001 01 = Slot path LSB = 1 (Reverb)
0ppppppp PP = Parameter to be controlled.
0vvvvvvv VV = Value for the Parameter.
11110000 F0 = Exclusive status
01111111 7F = Universal Real Time
0xxxnnnn XN = When N is received N=0-F,whichever is received. X=ignored
00001010 0A = Sub-ID #1=Key-Based Instrument Control
00000001 01 = Sub-ID #2=Controller
0000mmmm 0M = MIDI Channel (00-0F)
0kkkkkkk KK = Key Number
0ccccccc CC = Controller Number
0vvvvvvv VV = Value
: :
11110111 F7 = End of Exclusive
Make sure to set both the controlled number and the value.
Control Number(CC)Value(VV) DescriptionDefault Value
GM1 System On [GM1] [GM2]F0 7E XN 09 01 F7OO (Available for song parts)OOO
GM2 System On [GM2]F0 7E XN 09 03 F7OO (Available for song parts)XOX
General MIDI System Off
[GM1] [GM2]
Scale/Octave Tuning [GM2]F0 7E XN 08 08 JJ GG MM SS ... F7OO (Available for song parts)XOX
11110000 F0 = Exclusive status
01111110 7E = Universal Non-Real Time
0xxxnnnn XN = When N is received N=0-F,whichever is received. X=ignored
00001001 09 = Sub-ID #1=General MIDI Message
00000001 01 = Sub-ID #2=General MIDI On
11110111 F7 = End of Exclusive
11110000 F0 = Exclusive status
01111110 7E = Universal Non-Real Time
0xxxnnnn XN = When N is received N=0-F,whichever is received. X=ignored
00001001 09 = Sub-ID #1=General MIDI Message
00000011 03 = Sub-ID #2=General MIDI2 On
11110111 F7 = End of Exclusive
F0 7E XN 09 02 F7OO (Available for song parts)XOX
11110000 F0 = Exclusive status
01111110 7E = Universal Non-Real Time
0xxxnnnn XN = When N is received N=0-F,whichever is received. X=ignored
00001001 09 = Sub-ID #1=General MIDI Message
00000010 02 = Sub-ID #2=General MIDI Off
11110111 F7 = End of Exclusive
11110000 F0 = Exclusive status
01111110 7E = Universal Non-Real Time
0xxxnnnn XN = When N is received N=0-F,whichever is received. X=ignored
00001000 08 = Sub-ID #1=MIDI Tuning Standard
00001000 08 = Sub-ID #2=scale/octave tuning 1byte form
0jjjjjjj JJ = Channel/option byte1
0ggggggg GG = Channel byte2 - bits0 to 6 = channel 8 to 14
0mmmmmmm MM = Channel byte2 - bits0 to 6 = channel 1 to 7
0sssssss SS = 12byte tuning offset of 12 semitones from C to B
: :
11110111 F7 = End of Exclusive
bits 0 to 1 = channel 15 to 16
bits 2 to 6 = reserved
00H means -64cent
40H means 0cent
7FH means +63cent
[MIDI][Internal Sequencer]
SongVoice1(Right)/
Voice2/Left
Voice1(Right)/
Voice2/Left
PLAY Voice1(Right)/Voice2/
Left
F11/F01 Data List
19
(F11) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
Bank Select
Volume/Pan
Data Entry
Pedal
Sound Controller
Reverb/Chorus Depth
RPN Inc,Dec
NRPN LSB,MSB
RPN LSB,MSB
Prog
Change : True #
System Exclusive
Common : Song Pos.
: Song Sel.
: Tune
System : Clock
Real Time : Commands
: All Sound Off
Aux :
Reset All Cntrls
: Local ON/OFF
Mes- : All Notes OFF
sages: Active Sense
: Reset
0 - 127
Ø
**************
Ø
˛
˛
˛
Ø
Ø
˛
˛
˛
˛
Ø
˛
Ø 0 - 127
Ø
˛
˛
˛
˛
˛
Ø
(120,126,127)
Ø (121)
Ø (122)
Ø (123-125)
Ø
˛
Notes:
Mode 1 : OMNI ON , POLY Mode 2 : OMNI ON ,MONO
Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF,MONO
F11/F01 Data List
22
Ø : Yes
˛ : No
(F01) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
Many MIDI messages listed in the MIDI Data Format are expressed in decimal numbers, binary numbers and hexadecimal numbers.
Hexadecimal numbers may include the letter “H” as a suffix. Also, “n” can freely be defined as any whole number.
To enter data/values, refer to the table below.
Decimal HexadecimalBinary
0000000 0000
1010000 0001
2020000 0010
3030000 0011
4040000 0100
5050000 0101
6060000 0110
7070000 0111
8080000 1000
9090000 1001
100A0000 1010
110B0000 1011
120C0000 1100
130D0000 1101
140E0000 1110
150F0000 1111
16100001 0000
17110001 0001
18120001 0010
19130001 0011
20140001 0100
21150001 0101
22160001 0110
23170001 0111
24180001 1000
25190001 1001
261A0001 1010
271B0001 1011
281C0001 1100
291D0001 1101
301E0001 1110
311F0001 1111
• Except the table above, for example 144-159 (decimal)/9nH/1001 0000-1001 1111 (binary) denotes the Note On Message for each channel (1-16). 176-191/BnH/1011 0000-1011 1111
denotes the Control Change Message for each channel (1-16). 192-207/CnH/ 1100 0000-1100 1111 denotes the Program Change Message for each channel (1-16). 240/F0H/1111 0000
denotes the start of a System Exclusive Message. 247/F7H/1111 0111 denotes the end of a System Exclusive Message.
• aaH (hexadecimal)/0aaaaaaa (binary) denotes the data address. The address contains High, Mid, and Low.
• bbH/0bbbbbbb denotes the byte count.
• ccH/0ccccccc denotes the check sum.
• ddH/0ddddddd denotes the data/value.
Decimal HexadecimalBinary
32200010 0000
33210010 0001
34220010 0010
35230010 0011
36240010 0100
37250010 0101
38260010 0110
39270010 0111
40280010 1000
41290010 1001
422A0010 1010
432B0010 1011
442C0010 1100
452D0010 1101
462E0010 1110
472F0010 1111
48300011 0000
49310011 0001
50320011 0010
51330011 0011
52340011 0100
53350011 0101
54360011 0110
55370011 0111
56380011 1000
57390011 1001
583A0011 1010
593B0011 1011
603C0011 1100
613D0011 1101
623E0011 1110
633F0011 1111
Decimal HexadecimalBinary
64400100 0000
65410100 0001
66420100 0010
67430100 0011
68440100 0100
69450100 0101
70460100 0110
71470100 0111
72480100 1000
73490100 1001
744A0100 1010
754B0100 1011
764C0100 1100
774D0100 1101
784E0100 1110
794F0100 1111
80500101 0000
81510101 0001
82520101 0010
83530101 0011
84540101 0100
85550101 0101
86560101 0110
87570101 0111
88580101 1000
89590101 1001
905A0101 1010
915B0101 1011
925C0101 1100
935D0101 1101
945E0101 1110
955F0101 1111
Decimal HexadecimalBinary
96600110 0000
97610110 0001
98620110 0010
99630110 0011
100640110 0100
101650110 0101
102660110 0110
103670110 0111
104680110 1000
105690110 1001
1066A0110 1010
1076B0110 1011
1086C0110 1100
1096D0110 1101
1106E0110 1110
1116F0110 1111
112700111 0000
113710111 0001
114720111 0010
115730111 0011
116740111 0100
117750111 0101
118760111 0110
119770111 0111
120780111 1000
121790111 1001
1227A0111 1010
1237B0111 1011
1247C0111 1100
1257D0111 1101
1267E0111 1110
1277F0111 1111
Program Change
If you assign Program Change numbers using numbers 0 through 127, subtract one (1) from a Program change number (P.C. #) listed above. For example, if you wish to change to a Program
with the P.C. #1, specify number 0. When program change reception is turned OFF, no program change data is transmitted or received. Also, Bank MSB/LSB is not transmitted or received.
Voice NameMSBLSBP.C.# (1-128)
G. PIANO 101221
VARIATION01231
G. PIANO 201121
VARIATION01122
E.PIANO 101226
VARIATION012289
E.PIANO 201225
VARIATION01235
HARPSI.01227
VARIATION01237
Voice NameMSBLSBP.C.# (1-128)
ORGAN 1012320
VARIATION012220
ORGAN 2012217
VARIATION012317
STRINGS012249
VARIATION012550
VIB./GTR.012212
VARIATION012225
BASS012233
VARIATION012234
P.C.#=Program Change number
F11/F01 Data List
23
(F01) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
ccHParameterData Range (vvH)
7AHLocal Control00H (off), 7FH (on)
(4) All Notes Off
ccHParameterData Range (vvH)
7BHAll Notes Off00H
Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the damper or sostenuto pedal
will continue to sound until the pedal is released.
(5) Omni Off (reception only)
ccHParameterData Range (vvH)
7CHOmni Off00H
Same processing as for All Notes Off.
(6) Omni On (reception only)
ccHParameterData Range (vvH)
7DHOmni On00H
Same processing as for All Notes Off.
(7) Mono (reception only)
ccHParameterData Range (vvH)
7EHMono00H
Same processing as for All Sound Off.
(8) Poly (reception only)
ccHParameterData Range (vvH)
7FHPoly00H
Same processing as for All Sound Off.
• When control change reception is turned OFF in the Function
mode, control change data will not be transmitted or received.
• Local on/off, OMNI on/off are not transmitted. (The appropriate note
off number is supplied with “All Note Off” transmission).
• When a voice bank MSB/LSB is received, the number is stored in
the internal buffer regardless of the received order, then the stored
value is used to select the appropriate voice when a program
change message is received.
• The Multi-timbre and Poly modes are always active. No change
occurs when OMNI ON, OMNI OFF, MONO, or POLY mode messages are received.
4. PROGRAM CHANGE
Data format: [CnH] ➝ [ppH]
CnH = Program event (n = channel number)
ppH = Program change number
• When program change reception is turned OFF in the Function
mode, no program change data is transmitted or received. Also,
Bank MSB/LSB is not transmitted or received.
(F01) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
DataTransmissionReception
Tr ansmitted every
F8H
96 clocks
FAHRecorder start
FCHRecorder stop
Tr ansmitted every
FEH
200 milliseconds
Received as 96-clock tempo timing when
MIDI clock is set to External
Recorder start
Not received when the MIDI clock is set to
Internal.
Recorder stop
Not received when the MIDI clock is set to
Internal.
If a signal is not received via MIDI for more
than 400 milliseconds, the same processing
will take place for All Sound Off, All Notes Off
and Reset All Controllers as when those signals are received.
• Caution: If an error occurs during MIDI reception, the Damper, Sostenuto, and Soft effects for all channels are turned off and an All
Note Off occurs.
6. SYSTEM EXCLUSIVE MESSAGES (Yamaha MIDI Format)
F0H = Exclusive status
7EH = Universal Non-Realtime
7FH = ID of target device
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
or
F0H = Exclusive status
7EH = Universal Non-Realtime
XnH = When received, n=0-F.
X = don’t care
09H = Sub-ID #1=General MIDI Message
01H = Sub-ID #2=General MIDI On
F7H = End of Exclusive
When the General MIDI mode ON message is received, the MIDI
system will be reset to its default settings.
This message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent.
F0H = Exclusive status
43H = YAMAHA ID
1nH = When received, n=0-F.
4CH = Model ID of XG
hhH = Address High
mmH =
llH = Address Low
ddH = Data
|
F7H = End of Exclusive
Data size must match parameter size (2 or 4 bytes).
When the XG System On message is received, the MIDI system
will be reset to its default settings.
The message requires approximately 50ms to execute, so sufficient time should be allowed before the next message is sent.
F0H = Exclusive status
43H = YAMAHA ID
0nH = When received, n=0-F.
4CH = Model ID of XG
aaH = ByteCount
bbH = ByteCount
hhH = Address High
mmH =
llH = Address Low
ddH = Data
| |
| |
ccH = Check sum
F7H = End of Exclusive
• Receipt of the XG SYSTEM ON message causes reinitialization of
relevant parameters and Control Change values. Allow sufficient
time for processing to execute (about 50 msec) before sending the
CLP-240/230 another message.
• XG Native Parameter Change message may contain two or four
bytes of parameter data (depending on the parameter size).
•For information about the Address and Byte Count values, refer to
Ta ble 1 below. Note that the table’s Total Size value gives the size
of a bulk block. Only the top address of the block (00H, 00H, 00H)
is valid as a bulk data address.
[llH] ➝ [ddH] ➝ [F7H]
When transmitted, n=0.
Address Mid
[hhH] ➝ [mmH] ➝ [llH] ➝ [ddH] ➝...➝ [ccH] ➝
[F7H]
When transmitted, n=0.
Address Mid
F11/F01 Data List
25
(F01) MIDI Data Format / MIDI-Datenformat / Format des données MIDI / Formato de datos MIDI
9. SYSTEM EXCLUSIVE MESSAGES
(Clavinova MIDI Format)
Data format:
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
01H = Product ID
nnH = Substatus
nn Control
02H Internal MIDI clock
03H External MIDI clock
F7H = End of Exclusive
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
7FH = Extended Product ID
xxH = Product ID
11H = Special control
0nH = Control MIDI change (n=channel number)
cc =Control number
vv =Value
F7H = End of Exclusive
[F0H] ➝ [43H] ➝ [73H] ➝ [01H] ➝ [nnH] ➝ [F7H]
[ccH] ➝ [vvH] ➝ [F7H]
Control0nccHvvH
Split PointAlways 00H14H
MetronomeAlways 00H1BH00H: No accent
Damper Level
Channel Detune
Voice Reserve
When Volume, Expression is received for Reserve On, they will be
*
effective from the next Key On. Reserve Off is normal.
ch: 00H-0FH 3DH (Sets the Damper Level for
ch: 00H-0FH 43H (Sets the Detune value for
ch: 00H-0FH 45H00H : Reserve off 7FH :
14H:
Split Key Number
01H-0FH: 1/4-15/4
7FH: off
each channel) 00H-7FH
each channel) 00H-7FH
on*
11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format:
Master Tuning (XG and last message priority) simultaneously
changes the pitch of all channels.
F0H = Exclusive Status
43H = Yamaha ID
1nH = When received, n=0-F.
27H = Model ID of TG100
30H = Sub ID
00H =
00H =
mmH = Master Tune MSB
llH = Master Tune LSB
ccH = don’t care (under 7FH)
F7H = End of Exclusive