ELS-01/01C Version 1.6
New Functions
Yamaha has updated the firmware of the ELS-01/01C as Version 1.6.
This version provides additional functions and has some changed LCDs.
This manual provides the instructions for new functions. The “Reference Page”
on the outside margin indicates the relevant page number of the ELS-01/01C
Owner’s Manual. Refer to the Owner’s Manual also. (ELS-01/01C Owner’s
Manual is the manual for Version 1.0.)
Contents
Music Data Recorder (MDR). . . . . . . . . . . . . . . . . . . . . . . . . . page 2
Recalling Recorded Registrations . . . . . . . . . . . . . . . . . . . . . . page 2
Moving a Protected Song . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
Rhythm Sequence Program. . . . . . . . . . . . . . . . . . . . . . . . . . page 4
Programming Next Regist in Registration Sequence . . . . . . . . page 4
Internet Direct Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
Confirming the Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
Wireless LAN Connection Settings . . . . . . . . . . . . . . . . . . . . . . page 7
ELS-01/01C Version 1.6 New Functions
EN
1
Music Data Recorder (MDR)
Recalling Recorded Registrations
The M.D.R. independently records the following five types of data:
Reference Pages
Recalling Recorded
Registrations (page 111)
• REGIST: Registration data (data recorded in the Registration Memory)
• USER VOICE: User voices and VA custom voices
• K.B.P.: Keyboard Percussion settings
• USER RHYTHM: User rhythms
• SEQUENCE: Rhythm Sequences (including Registration Sequences)
In the Regist Edit display, you can select and recall the desired data independently.
Select the song you want to load back (recall) to the Electone.
1
For details on selecting a song, see page 96 of the Owner’s Manual.
Press the [REGIST EDIT] button in the SONG SELECT Page to
2
call up the Regist Edit display.
NOTE
When you load the
Registration data by using
the Next Regist function, all
data will be loaded no
matter which buttons you
select here.
Select the Registration you want to load to the Electone.
3
Using the five “DATA TO BE LOADED” buttons, select the desired
4
data you want to load.
ELS-01/01C Version 1.6 New Functions
2
Press the [LOAD] button to load the selected data in the
5
Registration.
Exit from the Regist Edit display by pressing the [CLOSE] button
6
at the top right of the display.
When you select the protected song, the buttons (DATA TO BE LOADED) may
be unavailable (grayed out). This is for protecting the copyright. For example,
combining a part of one protected song with another protected song is not allowed.
Moving a Protected Song
This function lets you move a Protected Song to another folder or another SmartMedia
card by using the [SONG COPY] button. Although the [SONG COPY] button is
used here, the song will not actually be copied; it will only be moved. The procedure is
the same as that of the Song Copy operation. See page 118 of the Owner’s Manual.
ELS-01C Song Icon
Note that there is a new icon for songs created with the ELS-01C.
Indicates a song that has been created with the ELS-01C or the ELS01X.
Storage Media for Protected Songs
On the ELS-01/01C version 1.6 or later, it is possible to save protected songs to
USB flash memory.
Reference Page
About Protected Songs
(page 121)
ELS-01/01C Version 1.6 New Functions
3
Rhythm Sequence Program
Programming Next Regist in Registration
Sequence
Reference Pages
Next Regist Settings (page
109)
Programming a Registration
Sequence (page 175)
NOTE
If you are loading a
Registration while a rhythm
is playing, the sequence
data and User rhythms in
the Registration data cannot
be loaded.
You can program the Next Regist function in Registration Sequences. Using this
function, the next registration data in current song can be loaded automatically just by
playing the rhythm sequence.
Registration Sequence display
2
1
1 SET
For replacing a Registration number (or Next Regist) at the cursor position to Next
Regist. This button is useful when you want to change the timing of the Next Regist
function. For details, see next page.
NOTE
Although you move the
cursor to the Next Regist
mark in the display, the next
registration data will not be
loaded.
2 INSERT
For entering Next Regist data in the Registration Sequence.
Entering Next Regist
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
Using the buttons in the display or the Data Control
1
dial, set the Bar/Beat/Clock position at which you want to enter
the Next Regist (1 beat = 96 clock).
Press the NEXT REGIST [INSERT] button in the display.
2
The Next Regist mark ( ) appears in the display in the timing you set in step
#1, indicating that the Next Regist is entered.
ELS-01/01C Version 1.6 New Functions
4
Loading...