Yamaha Electric Guitar, Pacifica 012 User Manual
ELECTRIC GUITAR
Pacifica 012
SERVICE MANUAL
The solder used in the production of this product contains LEAD. In addition, other electrical/
electronic and/or plastic (Where applicable) components may also contain traces of chemicals
found by the California Health and W elfare Agency (and possibly other entities) to cause cancer
and/or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR
MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not
inhale solder fumes or expose eyes to solder/flux vapor!
If you come in contact with solder or components located inside the enclosure of this product,
wash your hands before handling food.
This document is printed on chlorine free (ECF) paper with soy ink.
EG
WARNING : CHEMICAL CONTENT NOTICE!
CONTENTS
OVERALL ASSEMBLY ............................................ 2
CIRCUIT DIAGRAM .................................................. 4
WIRING .................................................................... 4
SPECIFICATIONS ................................................. 4
011613
0.768K-921 Printed in Japan ’01.11
HAMAMATSU, JAPAN
Pacifica 012
OVERALL ASSEMBLY
E27
Bridge Assembly: Vintage Type (QC493900)
B01
B04
E01
E01b
E06b
E06
A01a
A seal is attached
on the rear of the neck.
PAC 012
E06a
E20
B05
B03
B02
D01
G02
E43
E01a
E12
E39
A01
E43a
E11
E10
Jack Installation
F11
F11c
F11
F12
F13
E20a
E20
F11b
F13
F11a
G01
E27b
E27a
E27c
E54E53
G04 G05
G03
G08 G09
G07
G11
G12 G13
E28
F04
F01d
F03
F01
E48
F08
VOLUME: 15A 500KΩ
E49
F01a
F09 F10
F01b F01c
F08 F09 F10
E27
TONE: 05A 250KΩ
F11
F12
F13
E43
F11a F11b
F11c
E43a
2
Loading...