Yamaha DZR10-D User Manual
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manual de instrucciones
Manual do Proprietário
JA
RU
KO
IT
PT
ES
FR
DE
EN
Manuale di istruzioni
Руководство пользователя
POWERED SPEAKER SYSTEM
POWERED SUBWOOFER
POWERED LOUDSPEAKER
Explanation of Graphical Symbols
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ATTENTION :
POUR RÉDUIRE LES RISQUES D'ÉLECTROCUTION, NE PAS RETIRER
LE CAPOT (OU LE DOS). NE CONTIENT PAS DE PIÈCES NÉCESSITANT
L'INTERVENTION DE L'UTILISATEUR. POUR TOUTE INTERVENTION,
FAIRE APPEL À DES PROFESSIONNELS QUALIFIÉS.
ATTENTION
RISQUE DE CHOC
ELECTRIQUE-NE PAS OUVRIR
The above warning is located on the rear of the unit. L’avertissement ci-dessus est situé sur l’arrière de l’unité.
Explication des symboles
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
L’éclair avec une flèche à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence d’une
« tension dangereuse » non isolée à l’intérieur de l’appareil, pouvant être suffisamment élevée pour constituer un risque d’électrocution.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
Le point d’exclamation à l’intérieur d’un triangle équilatéral est destiné à attirer l’attention de l’utilisateur sur la présence
d’instructions importantes sur l’emploi ou la maintenance (réparation) de l’appareil dans la documentation fournie.
IMPORTANT SAFETY
INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
8 Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9 Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
10 Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
12 Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.
(UL60065_03)
PRÉCAUTIONS CONCERNANT LA SÉCURITÉ
1 Lire ces instructions.
2 Conserver ces instructions.
3 Tenir compte de tous les avertissements.
4 Suivre toutes les instructions.
5 Ne pas utiliser ce produit à proximité d’eau.
6 Nettoyer uniquement avec un chiffon propre et sec.
7 Ne pas bloquer les orifices de ventilation. Installer l’appareil
conformément aux instructions du fabricant.
8 Ne pas installer l’appareil à proximité d’une source de chaleur
comme un radiateur, une bouche de chaleur, un poêle ou tout
autre appareil (y compris un amplificateur) produisant de la
chaleur.
9 Ne pas modifier le système de sécurité de la fiche polarisée ou de
la fiche de terre. Une fiche polarisée dispose de deux broches dont
une est plus large que l’autre. Une fiche de terre dispose de deux
broches et d’une troisième pour le raccordement à la terre. Cette
broche plus large ou cette troisième broche est destinée à assurer
la sécurité de l’utilisateur. Si la fiche équipant l’appareil n’est pas
compatible avec les prises de courant disponibles, faire remplacer
les prises par un électricien.
10 Acheminer les cordons d’alimentation de sorte qu’ils ne soient
pas piétinés ni coincés, en faisant tout spécialement attention aux
fiches, prises de courant et au point de sortie de l’appareil.
11 Utiliser exclusivement les fixations et accessoires spécifiés par le
fabricant.
12 Utiliser exclusivement le chariot, le stand, le
trépied, le support ou la table recommandés par
le fabricant ou vendus avec cet appareil. Si
l’appareil est posé sur un chariot, déplacer le
chariot avec précaution pour éviter tout risque
de chute et de blessure.
13 Débrancher l’appareil en cas d’orage ou lorsqu’il doit rester hors
service pendant une période prolongée.
14 Confier toute réparation à un personnel qualifié. Faire réparer
l’appareil s’il a subi tout dommage, par exemple si la fiche ou le
cordon d’alimentation est endommagé, si du liquide a coulé ou
des objets sont tombés à l’intérieur de l’appareil, si l’appareil a été
exposé à la pluie ou à de l’humidité, si l’appareil ne fonctionne pas
normalement ou est tombé.
AVERTISSEMENT
POUR RÉDUIRE LES RISQUES D’INCENDIE OU DE DÉCHARGE
ÉLECTRIQUE, N’EXPOSEZ PAS CET APPAREIL À LA PLUIE OU À
L’HUMIDITÉ.
(UL60065_03)
1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not
expressly approved by Yamaha may void your authority, granted
by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories
and/or another product use only high quality shielded cables.
Cable/s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class “B”
digital devices. Compliance with these requirements provides a
reasonable level of assurance that your use of this product in a
residential environment will not result in harmful interference with
other electronic devices. This equipment generates/uses radio
frequencies and, if not installed and used according to the
instructions found in the users manual, may cause interference
harmful to the operation of other electronic devices. Compliance
with FCC regulations does not guarantee that interference will not
occur in all installations. If this product is found to be the source of
interference, which can be determined by tur
ning the u
nit “OFF”
and “ON”, please try to eliminate the problem by using one of the
following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker
or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change
the lead-in to co-axial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type
of product. If you can not locate the appropriate retailer, please
contact Yamaha Corporation of America, Electronic Service Divi-
sion, 6600 Orangethorpe Ave, Buena Park, CA90620
The above statements apply ONLY to those products distributed
by Yamaha Corporation of America or its subsidiaries.
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (class B)
FCC INFORMATION (U.S.A.)
* This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. (FCC DoC)
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Corporation of America
Address : 6600 Orangethorpe Ave., Buena Park, Calif. 90620
Telephone : 714-522-9011
Type of Equipment : POWERED SPEAKER SYSTEM
Model Name : DZR315-D, DZR15-D, DZR12-D, DZR10-D, DXS18XLF-D, DXS15XLF-D
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including interference that may cause
undesired operation.
See user manual instructions if interference to radio reception is suspected.
In Finland: Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
In Norway: Apparatet må tilkoples jordet stikkontakt.
In Sweden: Apparaten skall anslutas till jordat uttag.
(class I hokuo)
PA_en_9 1/2
PRECAUTIONS
PLEASE READ CAREFULLY
BEFORE PROCEEDING
Please keep this manual in a safe place for
future reference.
WARNING
Always follow the basic precautions listed below to
avoid the possibility of serious injury or even death from
electrical shock, short-circuiting, damages, fire or other
hazards. These precautions include, but are not limited
to, the following:
If you notice any abnormality
• If any of the following problems occur, immediately turn off
the power switch and disconnect the electric plug from the
outlet.
- The power cord or plug becomes frayed or damaged.
- Unusual smells or smoke are emitted.
- Some object, or water has been dropped into the product.
- There is a sudden loss of sound during use of the product.
- Cracks or other visible damage appear on the product.
Then have the product inspected or repaired by qualified
Yamaha service personnel.
Power supply/power cord
• Do not place the power cord near heat sources such as
heaters or radiators, and do not excessively bend or
otherwise damage the cord, place heavy objects on it, or
place it in a position where anyone could walk on, trip over, or
roll anything over it.
• Only use the voltage specified as correct for the product. The
required voltage is printed on the name plate of the product.
• Use only the supplied power cord/plug.
If you intend to use the product in an area other than in the
one you purchased, the included power cord may not be
compatible. Please check with your Yamaha dealer.
• Check the electric plug periodically and remove any dirt or
dust which may have accumulated on it.
• Make sure to fully insert the electric plug to prevent electric
shocks or fire.
• When setting up the product, make sure that the AC outlet
you are using is easily accessible. If some trouble or
malfunction occurs, immediately turn off the power switch
and disconnect the plug from the outlet. Even when the
power switch is turned off, as long as the power cord is not
unplugged from the wall AC outlet, the product will not be
disconnected from the power source.
• Remove the electric plug from the outlet when the product is
not to be used for extended periods of time.
• Do not touch the product or the electric plug during an
electrical storm.
• Be sure to connect to an appropriate outlet with a protective
grounding connection. Improper grounding can result in
electrical shock, fire, or damage.
4
Do not open
• This product contains no user-serviceable parts. Do not
attempt to disassemble the internal parts or modify them in
any way.
Water warning/Fire warning
• Do not expose the product to rain, use it near water or in
damp or wet conditions, or place on it any containers (such
as vases, bottles or glasses) containing liquids which might
spill into any openings.
• Never insert or remove an electric plug with wet hands.
• Do not place any burning items or open flames near the
product, since they may cause a fire.
Hearing loss
• Before connecting the product to other devices, turn off the
power for all devices. Also, before turning the power of all
devices on or off, make sure that all volume levels are set to
the minimum. Failing to do so may result in hearing loss,
electric shock, or device damage.
• When turning on the AC power in your audio system, always
turn on the product LAST, to avoid hearing loss and speaker
damage. When turning the power off, the product should be
turned off FIRST for the same reason.
CAUTION
Always follow the basic precautions listed below to
avoid the possibility of physical injury to you or others,
or damage to the product or other property. These
precautions include, but are not limited to, the following:
Power supply/power cord
• When removing the electric plug from the product or an
outlet, always hold the plug itself and not the cord. Pulling by
the cord can damage it.
Location and connection
• Do not place the product in an unstable position where it
might accidentally fall over and cause injuries.
• Keep the device out of reach of children. This product is not
suitable for use in locations where children are likely to be
present.
• Do not block the vents. This product has ventilation holes at
the rear to prevent the internal temperature from becoming
too high. In particular, do not place the product on its side or
upside down. Inadequate ventilation can result in
overheating, possibly causing damage to the product(s), or
even fire.
• When attempting to dissipate heat on the product, when
installing it:
- Do not use the product in a confined, poorly-ventilated
location.
Inadequate ventilation can result in overheating, possibly
causing damage to the product(s), or even fire. Make sure
that there is adequate space around the rear panel: at least
30 cm above, 30 cm at the sides and 30 cm behind.
• Do not place the product in a location where it may come into
contact with corrosive gases or salt air. Doing so may result in
malfunction.
• Before moving the product, remove all connected cables.
PA_en_9 2/2
• When transporting or moving the product, always use two or
more people. Attempting to lift the product by yourself may
damage your back, result in other injury, or cause damage to
the product itself.
• Do not use the speaker’s handles for suspended installation.
Doing so can result in damage or injury.
• Do not hold the bottom of the product when transporting or
moving it. In doing so, you may pinch your hands under the
product, and result in injury.
• Do not press the rear panel of the product against the wall.
Doing so may cause the plug to come in contact with the wall
and detach from the power cord, resulting in short circuiting,
malfunction, or even fire.
• If you use the pole socket for mounting a satellite speaker
using a speaker pole, carefully read the section “r Dual pole
sockets” on page 7. Use of any other size pole may cause the
product to fall, and result in injury or damage to the internal
components.
• Always consult qualified Yamaha service personnel if the
product installation requires construction work, and make
sure to observe the following precautions.
- Choose mounting hardware and an installation location that
can support the weight of the product.
- Avoid locations that are exposed to constant vibration.
- Use the required tools to install the product.
- Inspect the product periodically.
Maintenance
• Remove the power plug from the AC outlet when cleaning the
product.
Handling caution
• Do not insert your fingers or hands in any gaps or openings
on the product (vents, ports, etc.).
• Do not operate the product if the sound is distorting.
Prolonged use in this condition could cause overheating and
result in fire.
NOTICE
To avoid the possibility of malfunction/damage to the product,
damage to data, or damage to other property, follow the notices
below.
Handling and maintenance
• Do not use the product in the vicinity of a TV, radio, AV
equipment, mobile phone, or other electric products. Otherwise, the product, TV, or radio may generate noise.
• Do not expose the product to excessive dust or vibration,
or extreme cold or heat (such as in direct sunlight, near a
heater, or in a car during the day), in order to prevent the
possibility of panel disfiguration, unstable operation, or
damage to the internal components.
• Condensation can occur in the product due to rapid, drastic changes in ambient temperature—when the product is
moved from one location to another, or air conditioning is
turned on or off, for example. Using the product while condensation is present can cause damage. If there is reason
to believe that condensation might have occurred, leave
the product for several hours without turning on the power
until the condensation has completely dried out.
• Do not place the speaker face down with the grille
attached, as deformation of the grille may result.
• When placing the speaker face down, always place it on a
flat surface.
• Do not touch the speaker driver unit.
• Air blowing out of the bass reflex ports is normal, and often
occurs when the speaker is handling program material
with heavy bass content.
• During extreme changes in temperature or humidity, condensation may occur and water may collect on the surface
of the product. If water is left, the wooden parts may
absorb the water and be damaged. Make sure to wipe any
water off immediately with a soft cloth.
Connectors
• XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
Yamaha cannot be held responsible for damage caused by
improper use or modifications to the product, or data that is
lost or destroyed.
Information
About functions/data bundled with the prod-
uct
• This product uses Dante Ultimo. Refer to the Audinate
website (English) for details on the open‐source licenses
for the particular software.
https://www.audinate.com/software-licensing
About this manual
• The illustrations and LCD screens as shown in this manual
are for instructional purposes only.
• The bitmap fonts used in this instrument have been provided by and are the property of Ricoh Co., Ltd.
• The company names and product names in this manual
are the trademarks or registered trademarks of their
respective companies.
• Software may be revised and updated without prior notice.
About disposal
• This product contains recyclable components. When disposing of this product, please contact the appropriate
local authorities.
5
Introduction
Thank you for purchasing the Yamaha DZR(-D) series POWERED LOUDSPEAKER and DXS-XLF(-D)
series POWERED SUBWOOFER. (See the series product lineup below.) These products are designed for
live performance, sound reinforcement and fixed installation sound system applications. This manual
explains how to install, set up, and configure the connections for the installers, constructors, or general
users familiar with speakers. Please read this manual thoroughly before you begin using this product in
order to get the most out of its various functions. After reading this manual, please keep it available for
future reference.
• The example illustrations used in this manual are taken from the DZR12-D and DXS18XLF-D, if not otherwise specified.
DZR(-D), DXS-XLF(-D) Series Product Lineup
Type Standard Model Dante Model (-D)
3-way 15" DZR315 DZR315-D
Full Range
Subwoofer
2-way 15" DZR15 DZR15-D
2-way 12" DZR12 DZR12-D
2-way 10" DZR10 DZR10-D
18" DXS18XLF DXS18XLF-D
15" DXS15XLF DXS15XLF-D
Contents
PRECAUTIONS ..................................................................... 4
Introduction ...........................................................................6
Main Features........................................................................6
Structure of Manuals ............................................................. 6
Included Accessories............................................................ 6
Functions............................................................................... 7
HOME Screen...................................................................... 10
Main Menus and Examples of Screens............................... 11
Screen Operations ..............................................................12
Using a USB Flash Drive to Save/Load Data ...................... 12
Basic Settings......................................................................13
Dante Connection................................................................14
Cardioid Mode Settings.......................................................15
Rotatable Horn.....................................................................16
Installation Examples...........................................................17
Optional Accessories (sold separately)...............................19
Troubleshooting ...................................................................19
General Specifications (English only)................................151
Dimensions (English only) .................................................153
Main Features
• Strong plywood cabinet features a high output Class D amplifier. Full-range models feature a powerful and lightweight neodymium magnet.
• Optimized pairing of a highly durable speaker unit with a fixed directional horn, for sparkling highs with punchy and powerful
bass.
• Full-range models feature an FIR filter for crossover and frequency adjustments. Low latency for DSP and AD/DA, thanks to 96
kHz sampling rate.
• LCD screen for loading presets, and for making precise graphical adjustments to EQ, delay, and routings. Easily transfer settings to a USB flash drive.
• Dante models (-D) support the transmission of digital audio and remote control via a Dante network.
• 2-way models support use on a stand or use as a floor monitor. Rotation of the horn, several rigging points, and optional
brackets allow a variety of installation methods.
Dante
Dante is a network audio transmission protocol developed by Audinate. It allows the transmission of uncompressed multi-channel digital
audio at low latency, as well as sample-level synchronization. Wiring is kept simple through connections using CAT5e cables.
Structure of Manuals
• Owner’s Manual (this book): Mainly provides explanations of the names, functions, and basic operations of each
component.
• Reference Manual: Mainly provides detailed explanations
of settings and operations. This can be downloaded from
the Yamaha Pro Audio global website.
https://www.yamaha.com/proaudio/
6
Included Accessories
• Power cord
• Owner’s Manual (this book)
Bottom
FRONT
7°
0°
7°
Pole socket
35 mm
diameter
M20 screw
NOTE
Functions
Full range
Subwoofer
Full-range Speaker (Rear)
wqe
q Tiltable pole socket
This mount has two pole sockets. You can choose the
angle of the speaker so that it is positioned horizontal to
the floor or tilting down toward the floor by 7 degrees.
Compatible with commercially available speaker stands
and speaker poles of 35 mm diameter. (These sockets are
not available on the DZR315(-D).)
Subwoofer (Rear)
r
t
y
r Dual pole sockets
Compatible with commercially available speaker poles of
35 mm diameter and M20 screw.
When using a pole socket to install a speaker, observe the
following conditions for safety.
Subwoofer Speaker to be installed Length of the pole
DXS18XLF(-D)
DXS15XLF(-D)
Weight: 26 kg or less
Height: 76.0 cm or less
(DZR15(-D) or smaller)
Weight: 22 kg or less
Height: 64.5 cm or less
(DZR12(-D) or smaller)
Weight: 18 kg or less
Height: 53.7 cm or less
(DZR10(-D) or smaller)
104 cm or less
82 cm or less
104 cm or less
w Screw holes for U-bracket
e Screw holes for eye bolts
For installing with the separately sold U-brackets. (These
sockets are not available on the DZR315(-D).)
For installing the speaker using eye bolts. The screw holes
for eye bolts go through the cabinet wall.
t Feet cups
When stacking multiple speakers, align the rubber feet of
the upper speaker to the feet cups of the lower one.
y Wheel mounting screws
For installing the separately sold Yamaha SPW-1 wheels. If
you are not using wheels, do not remove these screws.
Otherwise, the leakage of air will affect sound quality.
• For more information about installing wheels and related precautions, refer to the corresponding manual for the wheels.
• Do not install any item other than the SPW-1 wheels.
7
Functions
q
w
e
o
!0
!1
!1
y
r
i
t
u
Available only on Dante models
(See page 9.)
DZR(-D) Series DXS-XLF(-D) Series
Rear Panel (for both Full-range Speakers and Subwoofers)
r Display
Shows the settings for various functions.
t Main knob
Turn the knob to move the cursor that appears in the display and change parameter values. Press the knob to
execute a setting.
y [ ] (Back) key
Press this key to move up the previous screen. Press and
hold the key to return to the HOME screen.
u [LEVEL] controls
Adjust the level that is input to the [INPUT] jacks.
q USB terminal
For connecting a USB flash drive to save/load data.
NOTICE
When using a USB extension cable, use a cable that is no
longer than 1 m.
w [LIMIT] indicator
Lights red when the limiter for protecting the speaker is
active. If the indicator remains on, lower the level of the
input signal.
e [POWER] indicator
Lights green when the power is on. Flashes green when
the protection function is active and the output is muted.
(“MUTED” appears on the HOME screen in the display at
this time.)
i [INPUT] jacks
Combo jacks for line level input. Accept both XLR and
phone plugs.
o [THRU/OUTPUT] jacks
XLR output jacks. The output signal for channel 2 on fullrange speakers and both channels 1 and 2 on subwoofers can be switched using the [THRU/DSP OUT] switch.
On full-range speakers, channel 1 is fixed to [THRU].
!0 [THRU/DSP OUT] switch
Selects whether to output the signals from the input jacks
without processing ([THRU]) or to output the signals after
DSP processing ([DSP OUT]).
!1 Vents
A cooling fan is installed on the exhaust side. When the
speaker is in use, take care that all of the vents are free
from obstruction.
8
Functions
NOTE
!7
!4
!5
!4
!5!6 !6
NOTE
Power section
!2
!2 [AC IN] jack
Connect the supplied AC power cord here. First, connect
the power cord to this product, then insert the power cord
plug into the AC outlet. When removing the power cord,
perform this procedure in reverse order.
WARNING
Use only the supplied power cord/plug.
CAUTION
Be sure to turn the power off before connecting or
disconnecting the power cord.
Insert the power cord fully until it is locked by the latching
lock mechanism (V-Lock).
Press the V-Lock latch to disconnect the power cord.
!3 Power switch
Turns the power supply on [–] or off [ ].
WARNING
A small amount of current flows even when the
power switch is off. If you will not use the speaker
for a long time, be sure to unplug the power cord
from the outlet.
• Depending on the timing when the power switch is turned on/
off, it might take up to 15 seconds for the power to turn on.
• When using multiple devices, we recommend turning each
device on one at a time. If multiple devices are turned on at the
same time, the devices might not start up correctly due to a
voltage drop at the power supply.
!3
Dante section (Dante models only)
!4 Dante jacks
These are etherCON jacks for a Dante network. Both jacks
are primary connections. They can be used for daisy
chain connections. For details, refer to the Reference
Manual.
Use STP (Shielded Twisted Pair) cables to prevent electromagnetic interference. Make sure that the metal parts of the plugs are
electrically connected to the STP cable shield by conductive tape
or comparable means.
!5 [LINK] indicator
Shows the Dante communication status. Lights green
when an Ethernet cable is connected correctly to the
Dante jack.
!6 [1G] indicator
Lights orange when the Dante network is functioning as
Gigabit Ethernet.
!7 [SYNC] indicator
Lights steady or flashes green according to the Dante
communication status, as shown in the following table.
Steady
Continuously flashing
Periodically flashing
one time
Periodically flashing
two times
Periodically flashing
three times
Operating normally as a word clock
slave
Operating normally as a word clock
master
Incorrect word clock setting
Dante network cable not connected
Incorrect Dante network connection
9
HOME Screen
Full range
Subwoofer
Example (Dante models)
Full range
Example (Dante models)
Subwoofer
Dante model
Dante model
Full range
Subwoofer
Full range
Subwoofer
Subwoofer
Dante model
Dante model
The HOME screen appears when the power switch is turned on.
q
w
e
uy
Display Description
q UNIT ID, LABEL
w Input Meter (ANA*)
(*IN on standard models)
e Input Meter (DNT)
r MASTER Level Displays and sets the output level (Unit: dB).
t SP Output Meter Shows the output level.
y Protection
(THERMAL, MUTED)
u PRESET Shows the preset No. and title of the currently selected preset. Allows you to store, recall, and edit sound-
i HPF Allows you to configure and display the high-pass filter frequency settings.
LPF Allows you to configure and display the low-pass filter frequency and POLARITY settings. is displayed
o D-CONTOUR
rt
q
rt
i
o
!0
!1
!3
!4
Shows the UNIT ID and label that are used for Dante. Allows you to go to the DANTE SETUP screen to
configure and display Dante settings.
Shows the input level of the analog signal.
Shows the input level of the Dante signal.
Appears when the protection function is active. If the speaker is hot, THERMAL is displayed (and the output level is reduced). If the conditions of the usage environment become even worse, MUTED is displayed (and the output signal is muted).
related settings. E symbol is displayed when you edit a parameter.
when the polarity is set to INVERTED.
Allows you to configure and display the D-CONTOUR mode settings.
w
e
u
y
i
o
!0
!1
!2
!3
!4
D-XSUB Allows you to configure and display the D-XSUB mode settings.
!0 EQ Shows if the equalizer is ON or OFF. Allows you to configure the EQ settings while checking the frequency
!1 DELAY Allows you to configure and display delay settings.
!2 CARDIOID Allows you to configure and display the cardioid mode settings.
!3 ROUTER Allows you to configure the routing of the audio signal.
!4 UTILITY Allows you to configure and display the following settings.
For details, refer to the Reference Manual on the Yamaha Pro Audio global website.
https://www.yamaha.com/proaudio/
10
characteristics.
- PANEL SETUP: Configures display brightness, contrast, and display/indicator auto off settings.
- PANEL LOCK: Configures misoperation prevention setting, saves/loads PIN CODE.
- DEVICE BACKUP: Saves/loads configuration data.
- DANTE SETUP : Configures and displays Dante settings.
- NETWORK : Configures and displays network settings.
- DEVICE INFORMATION: Displays the status and information unique to this product.
- INITIALIZE: Performs initialization.
- LOG: Displays recorded logs. Saves logs to USB flash drive.
- UPDATE FIRMWARE: Update the main firmware and Dante module firmware.
Loading...