CDX-593/493/393
Natural Sound Compact Disc Player
Lecteur de disque audionumérique de la série “Natural Sound”
Thank you for selecting this YAMAHA Compact Disc Player.
Nous vous remercions d’avoir porté votre choix sur ce lecteur
de disque audionumérique YAMAHA.
U C A
OWNER’S MANUAL
FEA TURES
• Random Access Programmable Play
• Random-Sequence Play
• Single Track/Entire Disc Repeat Play
• Automatic Spacing Capability
• Automatic Programming for Recording to
T ape
• Automatic Peak Level Searching Capability
• CD Synchronized Recording with a
Compatible Y AMAHA T ape Deck
• Adjustable Display Brightness
• Remote Control Capability
• CDX-593 only
Optical and Coaxial Digital Outputs
• CDX-493 only
Optical Digital Output
MODE D’EMPLOI
CARACTERISTIQUES
• Lecture programmable à accès aléatoire
• Lecture en séquence aléatoire
• Lecture répétée de plage unique/disque entier
• Fonction d’espacement automatique
• Programmation automatique de pour
l’enregistrement sur bande
• Fonction de recherche automatique du niveau
de crête
• Enregistrement synchronisé de CD avec un
magnétophone à cassette compatible
YAMAHA
• Fonction de modification de luminosité de
l’affichage
• Fonctionnement par télécommande
• CDX-593 uniquement
Sorties numérique optique et sortie
numérique coaxiale
• CDX-493 uniquement
Sortie numérique optique
CONTENTS
Safety Instructions................................................2
Connections .........................................................4
Identification of Components................................6
Basic Operation....................................................8
Random-Sequence Play .................................... 12
Repeat Play........................................................12
Program Play......................................................13
Index Search ...................................................... 14
Track Programming for Recording to Tape ......... 15
CD Synchronized Recording.............................. 19
Notes about the Remote Control
Transmitter ......................................................... 20
Notes about Handling Compact Discs ............... 20
Troubleshooting.................................................. 21
Specifications .....................................................22
TABLE DES MATIERES
Attention ...............................................................3
Connexions ..........................................................4
Identification des composants.............................. 6
Fonctionnement de base......................................8
Lecture en séquence aléatoire........................... 12
Lecture répétée ..................................................12
Lecture programmée..........................................13
Recherche d’index .............................................14
Programmation des plages pour
enregistrement sur bande .................................. 15
Enregistrement synchronisé d’un CD.................19
Remarques concernant la télécommande ......... 20
Remarques concernant la manipulation des disques
compacts......................................................................
Dépistage de pannes ......................................... 21
Caractéristiques techniques............................... 22
20
SAFETY INSTRUCTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
• Explanation of Graphical Symbols
The lightning flash with arrowhead
symbol, within an equilateral triangle,
is intended to alert you to the
presence of uninsulated “dangerous
voltage” within the product’s
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to alert
you to the presence of important
operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
1 Read Instructions – All the safety and operating
instructions should be read before the unit is operated.
2 Retain Instructions – The safety and operating instructions
should be retained for future reference.
3 Heed Warnings – All warnings on the unit and in the
operating instructions should be adhered to.
4 Follow Instructions – All operating and other instructions
should be followed.
5 Water and Moisture – The unit should not be used near
water – for example, near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming
pool, etc.
6 Carts and Stands – The unit should be used only with a
cart or stand that is recommended by the manufacturer.
6A A unit and cart combination should be
moved with care. Quick stops, excessive
force, and uneven surfaces may cause the
unit and cart combination to overturn.
7 Wall or Ceiling Mounting – The unit should
be mounted to a wall or ceiling only as
recommended by the manufacturer.
8 Ventilation – The unit should be situated so that its location
or position does not interfere with its proper ventilation.
For example, the unit should not be situated on a bed,
sofa, rug, or similar surface, that may block the ventilation
openings; or placed in a built-in installation, such as a
bookcase or cabinet that may impede the flow of air
through the ventilation openings.
9 Heat – The unit should be situated away from heat
sources such as radiators, stoves, or other appliances that
produce heat.
2
10 Power Sources – The unit should be connected to a power
supply only of the type described in the operating
instructions or as marked on the unit.
11 Power-Cord Protection – Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the unit.
12 Cleaning – The unit should be cleaned only as
recommended by the manufacturer.
13 Nonuse Periods – The power cord of the unit should be
unplugged from the outlet when left unused for a long
period of time.
14 Object and Liquid Entry – Care should be taken so that
objects do not fall into and liquids are not spilled into the
inside of the unit.
15 Damage Requiring Service – The unit should be serviced
by qualified service personnel when:
A. The power-supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into the
unit; or
C. The unit has been exposed to rain; or
D. The unit does not appear to operate normally or
exhibits a marked change in performance; or
E. The unit has been dropped, or the cabinet damaged.
16 Servicing – The user should not attempt to service the unit
beyond those means described in the operating
instructions. All other servicing should be referred to
qualified service personnel.
17 Power Lines – An outdoor antenna should be located away
from power lines.
18 Grounding or Polarization – Precautions should be taken
so that the grounding or polarization is not defeated.
We W ant You Listening For A Lifetime
(for US customers only)
YAMAHA and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your
equipment by playing it at a safe level. One that lets the sound
come through loud and clear without annoying blaring or
distortion – and, most importantly, without affecting your
sensitive hearing. Since hearing damage from loud
sounds is often undetectable until it is too late,
YAMAHA and the Electronic Industries Association’s
Consumer Electronics Group recommend you to
avoid prolonged exposure from excessive volume
levels.
IMPORT ANT!
Please record the serial number of this unit in the space
below.
Model:
Serial No.:
The serial number is located on the rear of the unit.
Retain this Owner’s Manual in a safe place for future
reference.
CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT
English
1 To ensure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install your unit in a cool, dry, clean place – away from
windows, heat sources, vibration, dust, moisture, or cold.
To avoid humming sounds, locate the unit away from other
electrical appliances, motors, and transformers. To prevent
fire or electrical shock, do not expose to rain and water.
3 Do not operate the unit upside-down. It may overheat,
possibly causing damage.
4 Never open the cabinet. If a foreign object drops into the
set, contact your dealer.
5 Do not use force on switches, knobs or cords. When
moving the set, first turn the unit off. Always disconnect the
cords from the AC outlet or other equipment by pulling the
plug itself; never pull on the cord.
6 Do not clean the unit with chemical solvents; this might
damage the finish. Use a clean, dry cloth.
WARNING
CAUTION
Use of controls or adjustments or performance of
procedures other than those specified herein may result in
hazardous radiation exposure.
DANGER
Invisible laser radiation when open and interlock failed or
defeated.
Avoid direct exposure to beam.
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT AND FULLY INSERT.
FOR CANADIAN CUSTOMER
THIS CLASS B DIGITAL APPARATUS MEETS ALL
REQUIREMENTS OF THE CANADIAN INTERFERENCECAUSING EQUIPMENT REGULA TIONS.
7 Be sure to read the “TROUBLESHOOTING” section on
common operating errors before concluding that your unit
is faulty .
8 Do not place another component on top of this unit, as
damage or discoloration on the surface of the unit may
result.
9 To prevent damage by lightning, disconnect the power
cord from the AC outlet during an electrical storm.
10 When disconnecting the power cord from the AC outlet,
grasp the plug; do not pull the cord.
11 V oltage selector (General model only)
The voltage selector (on the rear panel of this unit) must
be correctly set to the voltage used locally before making
any connection to the AC power supply.
As the laser beam used in this compact disc player is harmful
to the eyes, do not attempt to disassemble the cabinet. Refer
servicing to qualified personnel only.
To avoid electrical shock, do not open the unit. Refer servicing
to qualified personnel only.
DANGER: The use of optical instrument with this product will
increase eye hazard.
Laser Diode Properties
• Material: GaAlAs
• Wavelength: 780 nm
• Emission Duration: continuous
• Laser Output: max. 44.6 µW*
* This output is the value measured at a distance of about
200 mm from the objective lens surface on the Optical Pickup Block.
FCC INFORMATION (for US customers only)
1. IMPORT ANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions
contained in this manual, meets FCC requirements.
Modifications not expressly approved by Y amaha may void your
authority, granted by the FCC, to use the product.
2. IMPORTANT: When connecting this product to accessories and/
or another product use only high quality shielded cables. Cable/
s supplied with this product MUST be used. Follow all
installation instructions. Failure to follow instructions could void
your FCC authorization to use this product in the USA.
3. NOTE: This product has been tested and found to comply with
the requirements listed in FCC Regulations, Part 15 for Class
“B” digital devices. Compliance with these requirements
provides a reasonable level of assurance that your use of this
product in a residential environment will not result in harmful
interference with other electronic devices.
This equipment generates/uses radio frequencies and, if not
installed and used according to the instructions found in the
users manual, may cause interference harmful to the operation
of other electronic devices.
Compliance with FCC regulations does not guarantee that
interference will not occur in all installations. If this product is found
to be the source of interference, which can be determined by
turning the unit “OFF” and “ON”, please try to eliminate the problem
by using one of the following measures:
Relocate either this product or the device that is being affected by
the interference.
Utilize power outlets that are on different branch (circuit breaker or
fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the
antenna. If the antenna lead-in is 300 ohm ribbon lead, change the
lead-in to coaxial type cable.
If these corrective measures do not produce satisfactory results,
please contact the local retailer authorized to distribute this type of
product. If you can not locate the appropriate retailer, please
contact Y amaha Electronics Corp., U.S.A. 6660 Orangethorpe A ve,
Buena Park, CA 90620.
The above statements apply ONL Y to those products distributed by
Yamaha Corporation of America or its subsidiaries.
3
CONNECTIONS
• Before making any connections, switch OFF the power to the
unit and the amplifier or other components.
• Connections should be made to the correct input terminals of
the amplifier or other components.
CDX-593
LINE OUT DIGITAL AUDIO OUT
1
OPTICAL COAXIAL
2
Optical fiber cable
(not included)
1
Connection cord
(included)
• If the placement of this unit creates interference (noise) in
other equipment, such as a tuner, relocate this unit away
from the affected equipment.
CDX-593
T o AC outlet
3
Connection cord
(not included)
Amplifier
CDX-493
1
Connection cord
(included)
LINE OUT
1
OPTICAL
CD DIGITAL IN
DIGITAL
AUDIO
OUT
OPTICAL
2
Optical fiber cable
(not included)
COAXIAL
CDX-493
T o AC outlet
Amplifier
OPTICAL
CD DIGITAL IN
4
CDX-393
English
LINE OUT
1
T o AC outlet
1
Connection cord
(included) Amplifier
CD
CDX-393
To connect this unit to your amplifier, choose one of the following procedures:
1 When the LINE OUT (analog) terminals of
this unit are used
• Be sure that the left (“L”) and right (“R”) LINE OUT
terminals are connected to the corresponding (left and
right) terminals of the amplifier or other component.
• Connect the “LINE OUT” terminals to the “CD” (or “AUX”)
terminals of the amplifier. If the amplifier does not have
such terminals, use the “T APE PB” terminals. For
additional details concerning these connections, refer to
the operation instructions for the amplifier being used.
• The LINE OUT terminals of this unit are numbered 1.
When connecting this unit with a YAMAHA amplifier or
receiver whose terminals on the rear panel are
numbered as 1, 2, 3, etc., connect the LINE OUT
terminals of this unit to the input terminals numbered 1
on the rear of the amplifier or receiver.
2 CDX-593 and CDX-493 only
When the DIGITAL OUT (OPTICAL) terminal
of this unit is used
• Before using this terminal, remove the terminal’s cover .
• Make the connection from this terminal to the optical
input terminal of an amplifier by using a commercially
available optical fiber cable.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
• Be sure to replace the terminal’s cover when this
terminal is not being used, in order to protect the
terminal from dust.
• The signal output level to an amplifier can be adjusted by
using the OUTPUT LEVEL button.
• This terminal can also be connected to the optical input
terminal of a digital audio tape deck (DAT) etc. to record
CD onto a tape directly .
3 CDX-593 only
When the DIGITAL OUT (COAXIAL) terminal
of this unit is used
• Make the connection from this terminal to the digital
input terminal of an amplifier by using a connection cord.
• The signal output level to an amplifier can be adjusted by
using the OUTPUT LEVEL button.
5
IDENTIFICATION OF COMPONENTS
( ) indicates the page number on which the control part is best described.
FRONT P ANEL
• The control functions on the main unit and on the remote
control transmitter are virtually identical, with the exceptions
below.
CDX-593, CDX-493
POWER switch (p. 8)
• (PLAY/PAUSE) button on the main unit has both the
functions of the PLAY button and the PAUSE button on the
remote control transmitter.
• The SKIP/SEARCH button on the main unit has both the
functions of the SKIP button and the SEARCH button on the
remote control transmitter.
AUTO DISPLAY OFF indicator
CDX-593 only (p. 11)
SKIP/SEARCH button (p. 9,10)
Display panel
POWER
CDX-393
POWER switch (p. 8)
Disc Tray (p. 8)
AUTO
OPEN/CLOSE
+
101234567890
DISPLAY OFF
Remote control sensor (p. 20)
Display panel
SKIP/SEARCH
OUTPUT LEVEL
PHONES
PHONES jack (p. 1 1)
POWER
Disc Tray (p. 8)
Remote control sensor (p. 20)
OPEN/CLOSE
+
101234567890
SKIP/SEARCH button (p. 9,10)
SKIP/SEARCH
6
REMOTE CONTROL TRANSMITTER
T APE button (p. 15)
English
DIMMER button (p. 1 1)
TIME button (p. 10)
SYNCHRO button (p. 19)
PEAK button (p. 18)
SPACE button (p. 10)
Number buttons (p. 9)
REPEAT button (p. 12)
OUTPUT LEVEL button (p. 11)
CDX-593 and CDX-493 only
STOP button (p. 9)
SYNCHRO
SPACE TAPEPEAK
21
54 6 +I0
87 9 0
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DIMMER TIME
3
REPEAT RANDOM
SEARCH
SKIP
OPEN/
CLOSE
PROGCLEAR
INDEX
OPEN/CLOSE button (p. 8)
CLEAR button (p. 14)
PROG (program) button (p. 13)
INDEX button (p. 14)
RANDOM button (p. 12)
SEARCH button (p. 10)
SKIP button (p. 9)
PLA Y button (p. 8)
PAUSE button (p. 9)
* The CDX-593 is used for illustration purposes in this manual. Any difference in the operation of other models is clearly indicated in
this instruction (for example, “CDX-593 only”).
This manual describes how to operate this unit by using the remote control transmitter. To operate this unit from the front panel, use
the corresponding buttons on the front panel.
7
21
SPACE TAPEPEAK
SYNCHRO
3
INDEX
PROGCLEAR
OPEN/
CLOSE
87 9 0
54 6+I0
DIMMER TIME
REPEAT RANDOM
SEARCH
SKIP
OUTPUT LEVEL
–+
STOP PAUSE PLAY
1 2 3 4 5 6 7 8 9 10 11 12
TOTAL
1
BASIC OPERA TION
2, 3
POWER
4
1 Turn the power on.
POWER
2 Load a disc.
OPEN/
CLOSE
Display information during disc play
Label side up
Disc tray
SINGLE
3 Close the disc tray.
OPEN/
CLOSE
4
PLAY
Play will begin from the first track of the disc.
Notes
• After closing the disc tray by pressing the OPEN/CLOSE
button, the display shows the total number of tracks and the
total recorded time of the disc for a few seconds.
3 4 5 6 7 8 9 10 11 12
1 Shows the track number selected or being played.
2 Shows the time displays. (Refer to “Selecting time displays”
on page 10.)
3 CDX-593 and CDX-493
Shows the signal output level to an amplifier or the
headphones, adjusted by using the OUTPUT LEVEL
button.
4 Displays the CD track numbers (up to 20). After each track
8
is played, its corresponding number disappears so that
remaining track numbers can be seen at a glance.
To turn off the power
Press the POWER switch again.
* If you turn on the power again with a CD in the tray, you can
start playing the CD automatically .
• Y ou can also close the disc tray by pressing the PLAY button
(or
button on the front panel), a number button, the
RANDOM button, or by pressing the front edge of the disc
tray gently. If the tray is closed in any of these ways, play will
begin automatically, however, the display will not show the
total number of tracks and the total recorded time of the disc.
To stop play temporarily To stop play completely
English
PAUSE
To resume play , press the PAUSE button again (or press the
PLAY button).
* button on the front panel can also be used to stop
play temporarily or to resume play.
To play a desired track on the disc
DIRECT PLAY
Select a desired track using the number buttons.
5
STOP
SKIP PLAY
To skip to a succeeding track, press the SKIP button once
or repeatedly until the desired track number appears.
SKIP
The selected track
number is displayed.
1 2 3 4 5 6 7 8 9
Example: To select track 25,
Press the number 10 button twice, then press the number 5
button once.
+I0
5
(twice)
* If you enter a number that is higher than the last track
number on the disc, the final track is played.
Caution
When the disc tray is open, do not touch the inside gear
wheel. If you touch the gear wheel, your finger may be
caught in the closing tray and injured.
To skip to the beginning of the current track, press the
SKIP
button once.
SKIP
To skip to a preceding track, press the SKIP button
repeatedly until the desired track number appears.
SKIP
• These operations can also be performed when the unit is in
the pause or stop mode.
• When using the SKIP button on the remote control
transmitter:
If the button is pressed and held, the track number
continuously changes to higher numbers (or lower
numbers).
• When using the SKIP/SEARCH button on the front panel:
Be careful not to press and hold the button, otherwise the
selected track is played forward (or backward) rapidly .
Gear wheel
9
T o advance or reverse play rapidly (MANUAL SEARCH)
T o advance rapidly
• The sound can be heard (although slightly garbled) during
manual search in either direction. This is convenient for
locating a precise position within a track, or for reviewing the
SEARCH
contents quickly .
• Manual search can also be performed while disc play is
(Press and hold.)
paused, though no sound will be heard.
• When using the SKIP/SEARCH button on the front panel:
Be careful not to release the button just after it is pressed,
otherwise the play is skipped to the beginning of the next
T o reverse rapidly
SEARCH
track or returned to the beginning of the current track.
(Press and hold.)
Selecting time displays
Y ou can select any of the four time displays by pressing the TIME display mode-select button.
1 Elapsed time of the track now playing
2 3 4 5 6 7 8 9 10 11 12
4 Total remaining time on the disc
2 3 4 5 6 7 8 9 10 11 12
TOTAL
REMAIN
2 Remaining time of the track now playing
REMAIN
2 3 4 5 6 7 8 9 10 11 12
Automatic spacing
If you record a disc onto tape with an insufficient time space
between tracks, the tape deck will not be able to perform blank
search operations on the tape correctly. Such a search mistake
of the deck can be prevented by pressing the auto-SP ACE
button to insert spaces of about 4 seconds between the tracks
before recording.
SPACE
SPACE
TIME
3 Total disc play time
TOTAL
2 3 4 5 6 7 8 9 10 11 12
Note
The remaining time 2 will not be displayed if the track number
is 25 or higher.
Note
When the automatic spacing function is in effect, the display of
the total time and of the total remaining time will include each
of the 4 second non-recorded intervals placed between tracks.
To cancel the automatic spacing function
SPACE
“SP ACE” goes off
from the display .
10
“SPACE” appears
on the display.
Changing the brightness of the display
CDX-593
You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.
English
During play
Normal illumination
DIMMER
Dim
(Off)
* While the display illumination is off,
the AUTO DISPLAY OFF indicator
on the front panel is illuminated.
AUTO
DISPLAY OFF
CDX-493, CDX-393
If desired, you can change the brightness of the display in three
degrees by pressing the DIMMER button.
During stopped or paused
Normal illumination
Dim
Dim
(The AUTO DISPLAY OFF indicator lights up.
In this state, if a disc is played, the display illumination
will be turned off.)
Normal illumination
DIMMER
Slightly dim
Dim
When you listen with headphones
CDX-593 and CDX-493 only
Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL button. Note that this
adjustment will also vary the signal output level to the amplifier.
PHONES
OUTPUT LEVEL
–+
11
RANDOM-SEQUENCE PLAY
The unit can play the tracks on a disc in a random sequence selected by the unit’s microcomputer.
To perform random-sequence play
RANDOM
To cancel random-sequence play
RANDOM
or
STOP
Notes
• This feature will not function during programming, or during
programmed play .
• If the SKIP button is pressed during random-sequence
play, the next randomly programmed track will be played. If
the SKIP button is pressed, play will return to the
beginning of the current track.
• This indication appears during random track
selection.
• Total remaining time on the disc will not be displayed during
random-sequence play .
CDX-593 and CDX-493 only
•
If the power is switched off during the random-sequence play,
pressing the POWER switch again to turn the unit on will
automatically restore the random-sequence play . This feature
is useful for timer play .
REPEAT PLAY
You can play any desired track or the entire disc repeatedly by pressing the REPEA T button. The repeat play mode will change
whenever you press the REPEA T button.
(Off)
SINGLE
REPEAT
FULL
REPEAT
REPEAT
SINGLE REPEAT
A single track is repeatedly played.
* This is also available in the programmed-play mode and the
random-sequence play mode.
* If the repeat play mode is switched off, the programmed-play
mode or the random-sequence play mode will be resumed.
FULL REPEAT
All tracks (the entire disc) are played repeatedly .
* In the programmed-play mode, all programmed tracks are
repeatedly played.
* In the random-sequence play mode, all randomly sequenced
tracks are repeatedly played in the same order.
CDX-593 and CDX-493 only
*
If the power is switched off during FULL REPEAT play mode,
pressing the POWER switch again to turn the unit on will
automatically restore FULL REPEAT play.
12
PROGRAM PLAY
By programming tracks, you can enjoy listening to your favorite tracks in any desired order. As many as 25 tracks can be
programmed in sequence.
English
1 Stop the unit.
2
PROG
STOP
PROGRAM
TOTAL
3
SYNCHRO
SPACE TAPEPEAK
OUTPUT LEVEL
–+
STOP PAUSE PLAY
OPEN/
DIMMER TIME
CLOSE
21
54 6+I0
87 9 0
PROGCLEAR
3
INDEX
REPEAT RANDOM
SEARCH
SKIP
2
41
3 Program a desired track by pressing the corresponding
number button.
6
* Repeat this operation to program more tracks. You can
select the same track again.
4
PLAY
Flashes.
Display information during programming
PROGRAM
TOTAL
PROGRAM
TOTAL
1 2 3 4 5 6
1 Shows the program number for the track to be entered
next.
2 Shows the selected track number.
3 Shows the total time of the tracks currently programmed.
4 Shows only the numbers of programmed tracks.
Notes
• In step 2, if “P-01” does not appear in the display , press the
TIME display mode-select button.
• If, during programming, the TIME display mode-select button
is pressed, the program number display is changed to display
the total time of the programmed tracks. To return to the
previous display , press the TIME display mode-select button
again.
• The SKIP (
and ) button can be used during
Program Play to skip to tracks within the Program.
• The SEARCH (
and ) button can be used during
Program Play to search all tracks, including unprogrammed
tracks.
• You can insert a pause in your program by pressing the
T APE button instead of a number button. (In this case,
B” appears on the display .)
“
• If, for a compact disc with 25 tracks or more, track number 25
or higher is programmed, the total time will disappear from
the display.
* If the total time becomes 100 minutes or more, the highest
position of a figure will not be displayed.
13
To stop program play
T o correct program data
Press the STOP button. The first programmed track number will
be displayed.
To resume play , press the PLAY button. Play will begin from the
beginning of the program.
1. Follow the procedure described in “To check program
data.”
2. Display the track number to be corrected by pressing the
SKIP button.
3. Press a number button to select a track to replace the one
T o check program data
displayed. The previously programmed track will be cleared
from the memory and the new one will be programmed.
1. Press the STOP button to stop the program play.
2. Press the PROG button.
4. After the correction has been completed, press the PROG
button or the PLAY button.
3. Press the SKIP button. Each time you press this
button, the track number and the program number is
T o cancel a program sequence
displayed in the order of the program. When you want to
check the preceding tracks, press the SKIP
button.
There are three methods, as described below.
• Press the STOP button or the CLEAR button while the unit is
stopped.
• Open the disc tray.
• Switch off the power.
INDEX SEARCH
If the disc includes index numbers, play can be started from any desired index number .
DIMMER TIME
3
REPEAT RANDOM
SEARCH
SKIP
CLOSE
INDEX
OPEN/
PROGCLEAR
2
1, 3
SYNCHRO
SPACE TAPEPEAK
OUTPUT LEVEL
–+
STOP PAUSE PLAY
21
54 6 +I0
87 9 0
1 Select a track which has index numbers.
2
INDEX
3 Select the desired index number.
14
5
INDEX
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
6
T o cancel the index search function
Press the INDEX button.
Notes
• Not all discs have index numbers. The index system is a
method for sub-dividing tracks into smaller divisions (for
example, the movements within classical symphonies) for
easier location of those parts. The liner notes with the disc
usually tell if such index numbers are included.
• If an index number is selected that is higher than any index
number on that disc, play will start from the last index
number point on the disc.
• For some discs, play may begin slightly prior to the actual
designated index point.
• If the disc has no encoded index points, play will begin from
the start of the selected track.
• The index number can be designated only while the INDEX
number display is illuminated.
TRACK PROGRAMMING FOR RECORDING TO TAPE
The unit can automatically program tracks considering the tape’s total time. This convenient feature can help you to program tracks
so that they fit onto the tape with the least amount of unrecorded space remaining at the end of each side (A and B) of the tape.
L Automatic tape-programming
The unit can automatically program tracks on a disc in their
original order.
3
2
5
SYNCHRO
SPACE TAPEPEAK
OUTPUT LEVEL
–+
STOP PAUSE PLAY
DIMMER TIME
21
3
54 6+I0
87 9 0
REPEAT RANDOM
SEARCH
SKIP
INDEX
OPEN/
CLOSE
PROGCLEAR
4
7
4 Otherwise, you can enter the tape’s total possible
recording time manually .
Example: For a C-64 tape (32 minutes on each side)
6
4
+
5 Press the REPEAT button.
REPEAT
1 6, 7
The unit automatically programs tracks for side A and side B
separately considering the tape’s total time.
1 Stop the unit.
STOP
6 Begin recording on the tape deck and press the
PLAY button on this unit at the same time.
English
* The peak level searching function of this unit is useful for
adjusting the recording level on the tape deck. (Refer to
page 18.)
2 You can automatically insert additional time space
between tracks. (Refer to page 10.)
SPACE
SPACE
3 Enter the tape’s total possible recording time.
TAPE
You can select any of four tape lengths by pressing the
T APE button.
7 The unit will pause at the end of side A of the tape.
Turn the tape over to side B, resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
Notes
• All the tracks may not be programmed if the tape’s length is
not enough. To program all tracks, use a longer tape.
• In step 5, you can check the program data for side A and
side B.
PROGRAM
A
1 2 3 4 5
1 The total number of programmed tracks of each side
appears momentarily when the automatic programming is
finished. Then the first programmed track number for side
A reappears.
2 Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
4 Shows the programmed track numbers for each side.
TOTAL
TAPE
(Off)
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
• Y ou can use “CD SYNCHRONIZED RECORDING” if you
have a YAMAHA tape deck with this function. In step 6 and 7,
press the SYNCHRO button then press the PLAY button on
this unit’s remote control transmitter . Recording automatically
begins (for details, refer to page 19.)
15
L Manual tape-programming
For recording tracks in any desired order onto a tape.
4
DIMMER TIME
3
REPEAT RANDOM
SEARCH
SKIP
OPEN/
CLOSE
INDEX
PROGCLEAR
2
3, 5
7
SYNCHRO
SPACE TAPEPEAK
OUTPUT LEVEL
–+
STOP PAUSE PLAY
21
54 6+I0
87 9 0
6, 7
1 Follow steps 1 – 4 on page 15.
5 Select the track numbers to be recorded on side B in
any desired order.
21 3
54 6
87 9 0
+
I0
6 Begin recording on the tape deck and press the PLAY
button on this unit at the same time.
7 The unit will pause at the end of side A of the tape.
Turn the tape over to side B, resume recording and, at
the same time, press the PLAY or PAUSE button on this
unit.
2
PROG
The track numbers you can program flash.
PROGRAM
A
1 2 3 4 5 6 7 8 9 10 11 12
TOTAL
REMAIN
3 Select the track numbers to be recorded on side A in
any desired order.
21 3
54 6
87 9 0
+
I0
The selected track numbers stop flashing and remain lit. If
a track is too long to fit on the remaining portion of side A,
the number stops flashing and disappears. You can not
program a number that stops flashing and disappears.
4 When track selection for side A is finished, press the
TAPE button.
Notes
• If, in step 3 or 5, “E rr” appears on the display, the track
number just selected cannot be programmed because there
is not enough time remaining on the tape. However, at this
time, if any other track number is flashing continuously on the
display, you can program it instead of the unprogrammable
one.
• In step 3 or 5, each time a selection is made, the track number
and the tape’s remaining time will be displayed, and then the
display will change to indicate the next program number.
• Y ou can use “CD SYNCHRONIZED RECORDING” if you
have a YAMAHA tape deck with this function. In step 6 and 7,
press the SYNCHRO button then press the PLAY button on
this unit’s remote control transmitter . Recording automatically
begins (for details, refer to page 19.)
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
• A maximum of 25 tracks can be programed. If you insert a
pause in your program, it is counted as one track.
• This function can be used to program up to track number 24.
If the disc has more than 24 tracks, track number 25 and
thereafter can not be programmed.
16
TAPE
A pause is inserted.
PROGRAM
B
2 3 5 6 7 9 11
TOTAL
REMAIN
L Automatic Random Program tape recording
The unit can automatically program tracks in random order for recording to tape.
English
DIMMER TIME
3
REPEAT RANDOM
SEARCH
SKIP
CLOSE
INDEX
OPEN/
PROGCLEAR
2
4
SYNCHRO
SPACE TAPEPEAK
OUTPUT LEVEL
–+
STOP PAUSE PLAY
21
54 6+I0
87 9 0
3, 4
1 Follow steps 1 – 4 on page 15.
2
RANDOM
The unit will automatically program tracks for side A and
side B separately considering the tape’s total time.
PROGRAM
A
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
TOTAL
1 The total number of programmed tracks of each side
appears momentarily when the automatic programming is
finished. Then the first programmed track number for side
A reappears.
2 Shows the total time of programmed tracks for each side.
3 Shows the side of the tape.
4 Shows the programmed track numbers for each side.
• To check, cancel or correct program data, refer to page 14.
* In checking the program data, note that “Pu” appears
between track numbers for side A and side B.
• Y ou can use “CD SYNCHRONIZED RECORDING” if your
tape deck has this function. In step 3 and 4, press the
SYNCHRO button then press the PLAY button on this unit’s
remote control transmitter. Recording automatically begins
(for details, refer to page 19.)
3 Begin recording on the tape deck and at the same time,
press the PLAY button on this unit.
4 The unit will pause at the end of side A of the tape.
Turn the tape over to side B. Resume recording and, at
the same time, press the PLAY or P AUSE button on this
unit.
Notes
• Because the programmed data changes every time the
RANDOM button is pressed, the amount of time remaining at
the end of the tape also changes accordingly.
• If the tape’s length is not enough, not all tracks can be
programmed. In this case, exchange the tape for a longer
one.
• In step 2, you can check the program data for side A and
side B.
17
Automatic searching for the peak level on a disc
This convenient feature automatically finds level peak in the source. It then plays the peak repeatedly for a few moments in order for
you to adjust the recording level on the tape deck, before you begin recording.
1 Stop the unit.
2
STOP
PEAK
2
1
SYNCHRO
SPACE TAPEPEAK
OUTPUT LEVEL
–+
STOP PAUSE PLAY
OPEN/
DIMMER TIME
CLOSE
21
54 6+I0
87 9 0
PROGCLEAR
3
INDEX
REPEAT RANDOM
SEARCH
SKIP
To cancel this function
Press the STOP button. (Some other buttons can also be used
to cancel this function.)
Notes
• Sound peak levels are randomly selected by this unit’s
internal microcomputer. Therefore, even if a peak search is
performed twice or more on the same disc, the same peak
may not be selected each time. However, this will not greatly
affect the adjustment of recording levels.
• In program play mode, this feature functions with
programmed tracks only . If program play is being performed,
first press the STOP button, and then press the PEAK
button. If program play is not being performed, press only the
PEAK button.
18
PEAK
The peak level search is performed on the disc.
PEAK
REPEAT
1 2 3 4 5 6 7 8 9 10 11 12
PEAK
REPEAT
1 2 3 4 5 6 7 8 9 10 11 12
Next, the part where the source level peaks is
repeatedly played. Adjust the recording level on the tape
deck listening to this sound.
CD SYNCHRONIZED RECORDING
This unit can perform automatic synchronized CD to tape recording. With this function, you can record a CD on tape very easily and
more precisely.
This recording method requires a YAMAHA tape deck compatible with this function. (Refer to the tape deck’s operation manual to
know whether it is compatible or not.)
* This unit and the tape deck must be placed near each other so that both can receive the signals from this unit’s remote control
transmitter.
English
3
4
1 Load the disc.
OPEN/
CLOSE
2 Load a tape on the tape deck.
* The peak level search function of this unit is useful for
adjusting the recording level on the tape deck. (Refer
to page 18.)
SYNCHRO
SPACE TAPEPEAK
OUTPUT LEVEL
–+
STOP PAUSE PLAY
OPEN/
DIMMER TIME
CLOSE
21
3
54 6 +I0
87 9 0
REPEAT RANDOM
SEARCH
SKIP
PROGCLEAR
INDEX
1
4
5
4 If necessary, select a desired track.
5
5
SKIP
or
PLAY
3
SYNCHRO
This unit enters into the pause mode, and the tape deck
enters into the REC/PAUSE mode.
* In this mode, the time display on this unit flashes on and
off.
Both CD play and tape deck recording begin.
* CD play begins a little later than recording starts.
6 If you want to stop recording temporarily and restart
recording from a desired track, follow steps 3 – 5 again.
To cancel this function
Press the STOP button.
Notes
• To finish or stop the recording, press the stop button on your
tape deck.
• A programmed sequence of tracks can also be recorded with
this function, instead of recording an entire disc. (Refer to
page 13 – 14 for the programming procedure.)
• This function can also be used together with the automatic
tape-programming function. (Refer to page 15 – 17.)
19
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER
Battery installation
2
1
3
Battery replacement
If you find that the remote control transmitter must be used
closer to the main unit than usual, the batteries are weak.
Replace both batteries with new ones.
Notes
• Use only AA, R6, UM-3 batteries for replacement.
• Be sure the polarities are correct. (See the illustration inside
the battery compartment.)
• Remove the batteries if the remote control transmitter will not
be used for an extended period of time.
• If batteries leak, dispose of them immediately. Avoid touching
the leaked material or letting it come in contact with clothing,
etc. Clean the battery compartment thoroughly before
installing new batteries.
Remote control transmitter operation range
CDX-593
Remote control
sensor
Within approximately
6 m (19.7 feet)
30°
Notes
• There should be no large obstacles between the remote
control transmitter and the main unit.
• If the remote control sensor is directly illuminated by strong
lighting (especially an inverter type of fluorescent lamp etc.),
it might cause the remote control transmitter not to work
correctly. In this case, reposition the main unit to avoid direct
lighting.
30°
NOTES ABOUT HANDLING COMPACT DISCS
• This compact disc player is designed only for playing
compact discs bearing the
any other type of disc into the unit.
The unit will also play 8-cm (3-inch) compact discs.
• To remove a disc from its storage case, open the case and
then press down at the center; with a finger through the
center hole and the outer edges held as shown in the
illustration, lift the disc out carefully .
• Always handle the disc with care so that its surface is not
scratched.
mark. Never attempt to load
• Compact discs are not affected by small particles of dust or
fingerprints on their playing surface, but even so they should
be kept clean. Wipe by using a clean, dry cloth. Do not wipe
with a circular motion; wipe straight outward from the center.
• Do not try to clean the disc’s surface by using any type of
disc cleaner, record spray, anti-static spray or liquid, or any
other chemical-based liquid, because such substances might
irreparably damage the disc’s surface.
• Do not expose discs to direct sunlight, high temperature or
high humidity for a long period of time, because these might
warp or otherwise damage the disc.
No!
• Compact discs are not subjected to wear during play , but
damage to the disc surface when the disc is being handled
can adversely affect the disc’s play.
20
To play a 8-cm (3-inch) CD
Place it in the inner recessed area of the disc tray. Do not put a
normal (12-cm/5-inch) CD on top of a 8-cm CD.
TROUBLESHOOTING
If the unit fails to operate normally , check the following points to determine whether the fault can be corrected by the simple
measures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cord and
contact your authorized YAMAHA dealer or service center for help.
English
SYMPTOM
The player does not switch ON when
the POWER switch is pressed.
It happens that this unit does not
work normally .
The disc tray does not close
completely .
Play does not begin.
Play is delayed, or begins at the
wrong place.
No sound.
Sound “skips.”
Sound “hums.”
Noise from a nearby tuner.
Noise from inside of the disc tray .
The remote control transmitter does
not work.
PROBABLE CAUSE
The power cord is not connected or not
completely connected.
There is an influence of strong external
noise (lightning, excessive static
electricity, etc.) or a misoperation was
performed while using this unit.
A foreign object is obstructing the tray.
The disc is damaged.
There is moisture on the laser pickup.
The disc has been loaded upside down.
The disc is dirty.
The disc may be scratched or damaged.
Improper output cable connections.
Improper amplifier operation.
The player is being subjected to
vibrations or impacts.
The disc is dirty.
Improper cable connections.
The tuner is too close to the player.
The disc may be warped.
The batteries of this remote control
transmitter are too weak.
Direct sunlight or lighting (of an inverter
type of fluorescent lamp etc.) is striking
the remote control sensor of the main
unit.
REMEDY
Securely connect the power cord.
Turn this unit power off and disconnect
the AC power from the AC outlet. After
about 30 seconds have passed, connect
the power and try again.
Carefully check the disc tray and remove
the foreign object.
Check the disc carefully; replace it if
necessary.
Wait 20 to 30 minutes after switching the
unit ON before trying to play a disc.
Reload the disc with the label side up.
Clean the disc.
Check the disc carefully; replace it if
necessary.
Connect the cables properly . If the
problem persists, the cables may be
defective.
Set the amplifier controls to the correct
input selection.
Relocate the player.
Clean the disc.
Securely connect the audio cables. If the
problem persists, the cables may be
defective.
Move the tuner and player farther apart.
Replace the disc.
Replace the batteries with new ones.
Change position of the main unit.
21
SPECIFICATIONS
AUDIO SECTION
Frequency response ...........................2 Hz – 20 kHz, ±0.5 dB
Harmonic distortion + noise (1 kHz)
<CDX-593>................................................... 0.0025% or less
<CDX-493, CDX-393> .................................... 0.003% or less
S/N ratio
<CDX-593>.................................................... 115 dB or more
<CDX-493, CDX-393> ................................... 105 dB or more
Dynamic range
<CDX-593>...................................................... 98 dB or more
<CDX-493, CDX-393> ..................................... 95 dB or more
Wow & flutter .....................................................Unmeasurable
Output voltage (1 kHz, 0 dB) .................................... 2.0±0.5 V
Headphones output (–20 dB)
<CDX-593 and CDX-493 only> ..........200±40 mV/150 ohms
GENERAL
Power requirements
U.S.A. and Canada models ..............................120 V, 60 Hz
Australia model................................................. 240 V, 50 Hz
Europe and U.K. models .................................. 230 V, 50 Hz
General model.........................110/120/220/240 V, 50/60 Hz
Power consumption ......................................................... 20 W
Dimensions (W × H × D)
<CDX-593,CDX-493> .............................. 435 × 96 × 272 mm
(17-1/4” × 3-7/8” × 10-3/4”)
<CDX-393>.............................................. 435 × 96 × 273 mm
(17-1/4” × 3-7/8” × 10-3/4”)
Weight
<CDX-593,CDX-493> ............................ 3.6 kg (7 lbs. 15 oz.)
<CDX-393>............................................ 3.5 kg (7 lbs. 11 oz.)
Accessories ....................................................Connection cord
Remote control transmitter
Batteries (size AA, R6, UM-3)
Please note that all specifications are subject to change
without notice.
22
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD1 7JS, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
VZ57260 Printed in Malaysia
Loading...