Yale YRV740WI-693 Quick Start Guide

Add a Device

Step 3

Scan Device ID

Step 5

Yale Look App Quick Start Guide

These steps must be completed before

™

your Look Door Viewer

For app quick start guides and manuals in other languages, visit YaleHome.com/Support

Download the App

will operate.

Step 1

Yale Look App

Install the free Yale Look app, available from the App Store and Google Play Store, on your smartphone. Create your account once you’ve successfully downloaded and opened the app.

Open your Yale Look app. For iOS, tap the ‘Account’ icon in the bottom navigation and then the ‘+’ icon in the top right corner. For Android ‘Account’. Then tap ‘Add Device’. Tap the ‘Account’ icon (the second icon on your bottom navigation bar) and then tap the ‘+’ icon (iOS), shown in the top right corner or ‘

iOS app screen Android app screen

Wi-Fi Direct Mode

After charging, insert the rechargeable battery pack into the Look Door Viewer. The small light on your monitor should be ﬂashing BLUE and RED. If it is not, press and hold the reset button for 5 seconds. Tap ‘Got It’.

Note: Android devices may not see this step.

’ icon (Android), shown in the top left corner.

™

, open the app drawer, and tap

Step 4

Using your smartphone, scan the DID bar code located on the back of the LCD monitor as well as on your installation manual. You can also type in your Device ID # (include hyphens). Tap ‘Next’.

Wi-Fi Connection

Conﬁrm your home’s Wi-Fi network is selected and enter your home Wi-Fi password. Tap ‘Next’. Open your smartphone’s Wi-Fi settings, select the network named ‘DDV-XXXX’, and enter password ‘12345678’. Once connected, go back to the Yale Look app and tap ‘Next’.

Note: This step happens automatically for Android.

Step 6

Connect to Wi-Fi

Ensure your smartphone or tablet is connected to your home Wi-Fi network. The Look Door Viewer requires a password protected 2.4 GHz Wi-Fi network to connect.

Step 2

Final Conﬁguration

Select whether you want photos or video to be taken when there is activity at your front door. Tap ‘Next’. Your Look Door Viewer will go through ﬁnal conﬁguration.

Your device LED will ﬂash RED and PINK after motion and/or a doorbell press if you failed to connect to a network. If your device fails to connect, please double check your Wi-Fi password, signal, device ID, and that you’re using a 2.4GHz Wi-Fi network before attempting connection again.

Step 7