Yale SV-4C-2ABFX, SV-8C-4ABFX, SV-4C-2DB4MX Operation Manual
CCTV Menu Operations
Manual
The smarter way to
protect your home.
SV-4C-2ABFX / SV-8C-4ABFX SV-4C-2DB4MX
English
Disclaimer!
This Manual will guide you through the standard settings and operations for normal Residential
CCTV usage. The system is based on a professional system and may contain advanced
features and settings that are typically not needed for residential use.
This manual will be continuously updated and be available at www.yalelock.com/smart-living.
(GB) Index
Plan the camera location
Connect cables as described in the manual that was included in the Kit.
Download App - Personal registration in the App
(It is better to have the App ready before starting the setup of the system. )
Initial setup: Wired Kit
WiFi Kit
Menu overwiev
Setting up recording and motion detection
Searching in recorded video
Backing up a video sequence
Yale info and help desk
03
04
05-06
07-11
12
13-15
16-17
18
19
1
2
3
4
5
6
7
8
PageSection
02
Plan camera locations and connect cables
Connect cables according to the manual that came with your Kit.
Plan the camera location
HDMI
Router
Not included
Nicht enthalten
Non inclusa
Non inclus
No incluido
HDMI
Router
Not included
Nicht enthalten
Non inclusa
Non inclus
No incluido
HDMI / VGA
Router
Not included
Nicht enthalten
Non inclusa
Non inclus
No incluido
IP-cam
IP-cam
03
1
Download App - Personal registration in the App
Download App for Android or IOS: “Yale Smart Living VIEW”
Personal registration in the App
App Log-in page
:
Initial setup:
1) Click Registrér
After registration/initial setup, you open from this page.
E-mail Register page
:
Initial setup:
2) Enter username
3) Enter password
4) Enter email
5) Click Registrér
6) Click Log-in This will take you back to.
Yale Smart Living VIEW
7) Enter username
8) Enter password
9) Click Log-in
04
2
1) Key in password
(Click in box and keybord display will appear)
2) Confirm password
3) Click NEXT
5) Click NEXT
10) Click NEXT
8) Click SAVE
4) Draw unlock pattern
(Min. 4 dots)
Draw again to confirm Draw unlock pattern
6) write e-mail address and complete security Questions
(These are optional and can be switched OFF by “un-ticking”
boxes)
7) Security Questions:
9) As default leave Auto-check for update ticked.
(This will automatically keep your system up to date;
but only if connected to the internet via Router)
Remember this pattern!
This will be your key to
access the system.
Initial setup for system with wired cameras.
Initial setup - Wired Kit
05
3
06
13) If you have only wired cameras in your Kit click NO.
(WiFi cameras can be added later if needed)
11) Click Refresh to update Network connection.
14) If you want access to your system via the Yale View App, scan
the QR code to connect to your DVR system.
(If not click NEXT)
15) Click NEXT
16) Click OK
12) Click NEXT
Initial setup for system with wired cameras.
The App needs to be installed
and registered before scanning.
The DVR system is now turned ON and
cameras are recording. System is as default
running in “Regular Mode”, which means
that cameras are recording 24 hours a day
and will overwrite the hard drive when full.
Other “Modes” and backing up recorded
video will be explained later in the manual.
Initial setup - Wired Kit
3
Loading...