Yale AC-100W Instruction Manual

Indoor dome camera with IR
night vision
The AC-100W is a colour CMOS Camera that can be operated in almost all lighting conditions, from bright daylight (provided the camera is not directly pointed at the sun) to complete darkness
The AC-100W is extremely sensitive to lighting conditions. You can make the most of
majority of light conditions. Colour image in the day and Black & White in low light conditions.
Display extreme caution when using ladders or steps. Please follow manufactures instructions.
Be careful when using hand & power tools and follow the manufactures guidelines when using them. Take care that the correct tools are used. Wear goggles or protective clothing where required.
In the event you feel unsure about the installation please consult your local qualified electrician.
Description
• Colour camera lens. Automatically switch to
Black & White mode in the dark.
• Infra-red LED for night vision
• Use supplied hex key to adjust camera angle
• Video output (BNC male connector)
• Power input (12V 500mA)
Pack contents
• 1 x Indoor dome Camera.
• 1 x Screw pack
• 1 x 15m BNC/DC extension cable
• 1 x 12V 500mA Power adaptor
Information and illustrations are subject to change within this document. Yale reserves the right to alter the specification
and product design at anytime without notice.
Yale is a registered trademark. 2014 ASSA ABLOY. All rights reserved
Easy Fit CCTV System
LED for night vision
Camera lens
Angle adjustment
Power
Video
(AC-100W)
Connecting your camera
Connecting to your DVR
Connecting to your TV
15m
BNC/DC cable
DVR
Adaptor
*Do not switch on the socket until everything is connected.
15m
BNC/DC cable
Adaptor
BNC male to
RCA male
adaptor
*not supplied
TV
*Do not switch on the socket until everything is connected.
Mounting the camera
The camera on the AC-100W is adjustable. To adjust the camera:
Unscrew 2 (anti-clockwise) while holding
1. This will release 3 and user can adjust the camera angle accordingly.
Use 1 as a mounting plate and fix it
against a flat surface.
Troubleshooting
Video Loss
Video Loss appears where the camera image should be displaying on my Recorder
Check the Extension cable (power & video) is connected to the camera
Check the video output from the camera is securely connected to a video
input channel on the DVR
Check the power from the camera is connected to the power adapter and connected to a power supply and switched on
Bright Spots at Night
When I view an image from the camera at night I can only see a bright spot with no image
This can be caused by a reflection from the cameras built in infra-red LED’s
looking through a window. Re-position
the camera to the other side of the window or to a different location
Can’t connect to my TV
The BNC extension cable will not connect to my TV
Majority of TV’s do not have a BNC
connection. You will need to purchase
a BNC to RCA adapter (not included).
This will allow the camera to be
connected to a RCA input (Yellow Socket) on the TV.
Technical Support
Email: info@yale.co.uk Telephone: 01902 364606 Fax: 0845 223 2127 Write to: Yale UK, School Street,
Willenhall, West Midlands WV13 3PW
3
1
2
3
1
2
Specification
Video
Image Sensor: Super CMOS Video Quality: 650TVL Minimum Illumination: 0 Lux (IR on) Day/Night Mode: Colour in lit up areas /
Black & White in dark (IR on)
Lens : Fixed 3.6mm Viewing Angle: 60 Degrees
Night Vision
Night Vision distance: 20 Meters IR Cut Filter: Yes for enhanced night
vision Infra-red LED’s: 24
General
Indoor/Outdoor use: Indoor use only Operating power: DC 12V 500mA Dimensions: 80mm(W)x80mm(L)
x70mm(H)
2 Year Instruction Statement:
This product is guaranteed for consumers against faulty workmanship, materials and function for a period of 2 years from the date of purchase providing the full installation and maintenance instructions are followed. Please keep your proof of purchase safe, this must be submitted when making a claim under this guarantee.
Please note that it is a condition of this guarantee that your Yale product:
• Has been correctly installed and
maintained in accordance with the Yale installation and maintenance instructions provided to you at the time of purchase.
• Has not been modified or damaged in
any way.
• Has not been subjected to
unauthorized repairs.
Yale are responsible under this guarantee for repairing the product or replacing the product as we deem necessary. If there is fault with the product, please contact Customer Services on 01902 364606, who will give you the name of an expert and confirm what you need to do to make a claim under this guarantee.
Please do not carry out any repairs without our authority or by using an unauthorised expert. Any repairs or other works carried out without our authorization or by using an unauthorized expert will not be covered under this guarantee.
This guarantee is non transferrable and
applies to products purchased in the United Kingdom only. This guarantee does not apply
to normal wear and tear. This does not affect your statutory rights. A full copy of the product instructions are available upon request or by visiting our website www.yale.co.uk.
E1 07/14
RoHS
Note: Waste electrical products and batteries
should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
Loading...