Page 1
Car Adapter
12-V-Spannungsquelle
(z. B. Energiestation
oder Autobatterie)
Car Adapter
photoLab
®
6xxx
photoLab
®
6100 VIS
photoLab
®
6600 UV-VIS
Bedienungsanleitung
photoLab
Mit dem Car Adapter photoLab® 6xxx können Sie die Spektralphotometer
photoLab
von der örtlichen Stromversorgung betreiben.
Dafür benötigen Sie eine 12 V - Spannungungsversorgung wie z. B. eine
handelsübliche 12 V - Energiestation oder eine 12 V - Autobatterie.
®
6100 VIS und photoLab®6600 UV-VIS mobil und unabhängig
6xxx
®
ba75758de03 08/2009
(baugleich mit Car Adapter spectroFlex)
Page 2
Car Adapter photoLab® 6xxx
Sicherheit Beachten Sie beim Betrieb mit einer externen Batterie die Sicherheitshin-
weise der Batterie.
Stellen Sie sicher, dass die Energiestation für den Betrieb des Spektralphotometers geeignet ist (siehe Technischen Daten der Energiestation und
Technische Daten des Spektralphotometers) .
Betriebsdauer
mit Batterie
Beispiel:
Betriebsdauer
mit einer Batterie
des Typs
12 V / 19 Ah
Technische Daten
Car Adapter
®
photoLab
6xxx
Die maximale Betriebsdauer hängt von verschiedenen Faktoren ab:
z Batterie (z. B. Nennkapazität, Zustand, Alter)
z Betriebsart des Spektralphotometers (z. B. Häufigkeit der Messungen)
z Photometer (Gerätetyp)
Gerätetyp Betriebsdauer bei optimalem
Zustand der Batterie
photoLab
photoLab
®
6100 VIS ca. 6.5 h
®
6600 UV-VIS ca. 16 h
Hinweis
Das Spektralphotometer verbraucht auch im Standby-Betrieb Strom.
Wenn Sie das Gerät bei Batteriebetrieb nicht benutzen, empfehlen wir, den
Car Adapter photoLab
®
6xxx abzuziehen.
Kabellänge 2 m
max. Spannung 12 V
max. Stromstärke 8 A
2
ba75758de03 08/2009
Page 3
Car Adapter
12 V power supply unit
(e.g. portable power
source or car battery )
photoLab
®
6100 UV
photoLab
®
6600 UV-VIS
Car Adapter
photoLab
®
6xxx
Operating manual
photoLab
With the Car Adapter photoLab® 6xxx, you can operate the photoLab®6100
UV and photoLab
pendent of the local power supply.
To do so, a 12 V power supply such as a commercial 12 V portable power
source or a 12 V car battery is required.
®
6600 UV-VIS spectrophotometers on the move and inde-
6xxx
®
ba75758de03 08/2009
(identical to Car Adapter spectroFlex)
Page 4
Car Adapter photoLab® 6xxx
Safety instructions For operation with an external battery, follow the safety instructions of the
battery.
Make sure the power source is suitable for operation of the spectrophotometer (see technical data of the power source and technical data of the spectrophotometer).
Operating time
with a battery
Example:
Operating time
with a battery
of the type
12 V / 19 Ah
Technical data
Car Adapter
photoLab
®
6xxx
The maximum operating time depends on various factors:
z Battery (e.g. nominal capacity, condition, age)
z Operating mode of the photometer (e.g. frequency of measurements)
z Photometer (instrument type)
Instrument type Operating time with the battery
in optimum condition
photoLab
photoLab
®
6100 UV approx. 6.5 h
®
6600 UV-VIS approx. 16 h
Note
The spectrophotometer consumes electricity even while it is in standby
mode.
We recommend to disconnect the Car Adapter photoLab
®
6xxx if you do not
use the spectrophotometer during battery operation.
Cable length 2 m
Max. voltage 12 V
Max. current 8 A
4
ba75758de03 08/2009
Page 5
Car Adapter
12 V power supply unit
(e.g. portable power
source or car battery )
photoLab
®
6100 VIS
photoLab
®
6600 UV-VIS
Car Adapter
photoLab
®
6xxx
Operating manual
photoLab
With the Car Adapter photoLab® 6xxx, you can operate the
photoLab
the move and independent of the local power supply.
To do so, a 12 V power supply such as a commercial 12 V portable power
source or a 12 V car battery is required.
®
6100 VIS and photoLab® 6600 UV-VIS spectrophotometers on
6xxx
®
ba75758de03 08/2009
(identical to Car Adapter spectroFlex)
Page 6
Car Adapter photoLab® 6xxx
Safety instructions For operation with an external battery, follow the safety instructions of the
battery.
Make sure the power source is suitable for operation of the spectrophotometer (see technical data of the power source and technical data of the spectrophotometer).
Operating time
with a battery
Example:
Operating time
with a battery
of the type
12 V / 19 Ah
Technical data
Car Adapter
photoLab
®
6xxx
The maximum operating time depends on various factors:
z Battery (e.g. nominal capacity, condition, age)
z Operating mode of the photometer (e.g. frequency of measurements)
z Photometer (instrument type)
Instrument type Operating time with the battery
in optimum condition
photoLab
photoLab
®
6100 VIS approx. 6.5 h
®
6600 UV-VIS approx. 16 h
Note
The spectrophotometer consumes electricity even while it is in standby
mode.
We recommend to disconnect the Car Adapter photoLab
®
6xxx if you do not
use the spectrophotometer during battery operation.
Cable length 2 m
Max. voltage 12 V
Max. current 8 A
4
ba75758de03 08/2009
Loading...