XPiQ inc PU65-14, PU65-25, PU65-30, PU65-31, PU65-32 Datasheet

70

70

DESCRIPTION

The PU65 Series are open PCB type 65W AC/DC
switching power supplies. Utilizing the latest technology
and components, these units deliver 65 watts of power in
only a 6.0"x 3.5"x 1.77" package. The PU65 Series is
an 85-264 VAC universal input family which are
ideally suited for use in today's CRT, disc drive,
and small microprocessor based systems. All
units are approved to UL, CSA, and TUV
safety standards.

• UNIVERSAL INPUT

• ONLY 6.0” X 3.5” X 1.77”

FEATURES

• Small size 6.0” x 3.5” x 1.77”

• Universal input (no jumpers required)

• Built-in EMI filter

• High efficiency

• 100% burn-in

• Input surge current protection

• Output overvoltage/overcurrent protection

OUTPUT VOLTAGE/CURRENT RATINGS CHART

Output #1 Output #2 Output #3 Output #4 Maximum

Output

Model Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Power

PU65-10 5V 0.0A 10A 2% N/A N/A N/A 50W
PU65-12 12V 0.0A 5.5A 1% N/A N/A N/A 65W
PU65-13 15V 0.0A 4.5A 1% N/A N/A N/A 65W
PU65-14 24V 0.0A 3.0A 1% N/A N/A N/A 65W
PU65-25 +5V 1.0A 6.0A 3% +24V 0.3A 2.0A 5% N/A N/A 65W
PU65-30 +5V 1.0A 6.0A 3% +12V 0.5A 3.0A 5% -5V 0.1A 0.5A 10% N/A 65W
PU65-31 +5V 1.0A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% N/A 65W
PU65-32 +5V 1.0A 6.0A 3% +15V 0.4A 3.0A 5% -15V 0.1A 0.5A 10% N/A 65W
PU65-40 +5V 1.0A 6.0A 3% +12V 0.5A 3.0A 5% -12V 0.1A 0.5A 10% -5V 0.1A 0.5A 10% 65W

NOTE: All multi-output units maybe operated at no-load without damage. At no-load. output tolerance increases to 10%

International Power Sources, Inc.

65 WATT

SWITCHING

POWER SUPPLY

71

71

GENERAL SPECIFICATIONS

All specifications are typical at nominal line, full load, and 25°C.

Efficiency: 70% minimum at 65W output
Hold-up time: 10 msec minimum
Line regulation: ±0.5% maximum at full load
Inrush current: 15 amps @ 115 VAC, or

30 amps @ 230 VAC at 25°C
cold start

Withstand voltage: 3000 VAC from input to output

1500 VAC from input to ground

Insulation resistance: 10 Mohm minimum from output

to ground
Operating temperature: 0 to 70°C*
Storage temperature: -10 to +85°C
Mean time between 100,000 hours at full load
failure: at 25°C ambient
EMI requirements: Meets conduction limits of

a) FCC 20780 Level B

b) CISPR 22 (EN 55022) Level B
Safety requirements: Approved to:

a) UL 1950

b) CSA C22.2 No. 234

c) IEC 950 (per TUV )

INPUT SPECIFICATIONS

Input voltage: 85 to 264 VAC/115-280VDC
Input frequency: 47 to 440 Hz
Input current: 1.6A (rms) for 115 VAC

1.0A (rms) for 230 VAC

OUTPUT SPECIFICATIONS

Output voltage: See Rating Chart
Output current: See Rating Chart
Output power range: 0 to 65 watts
Ripple and noise: 1% peak to peak maximum
Overvoltage protection: Provided on output #1 only;

set at 112-132% of its nominal
output voltage

Overcurrent protection: All outputs protected to short

circuit conditions

Temperature Coefficient: All outputs ±0.04%/°C maximum

* Derate linearly from 100% load at 50°C to 50% load at 70°C

PIN CHART

MECHANICAL SPECIFICATIONS

1. Dimensions shown in

2. Tolerance maximum

3. Input connector mates with Molex housing
09-50-3031 and Molex 2878 series crimp

terminal

4. Output connector mates with Molex housing
09-50-3081 and Molex 2878 series crimp
terminal.

5. Weight: 380 grams appox.

Model PIN 1 2 3 4 5 6 7 8
PU65-10, PU65-12 OUTPUT OUTPUT OUTPUT OUTPUT RETURN RETURN RETURN RETURN

PU65-13, PU65-14 #1 #1 #1 #1
PU65-25 OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT N.C. N.C.

#1 #1 #2 #2
PU65-30, PU65-31 OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT. N.C
PU65-32 #1 #1 #2 #2 #3
PU65-40 OUTPUT OUTPUT COMMON COMMON OUTPUT OUTPUT OUTPUT. OUTPUT

#1 #1 #2 #2 #3 #4

inch
mm

.02

.5

Your Source of Power ...

260 Hopping Brook Road, Holliston, MA 01746

TEL: [phone] FAX: [phone]

http://www.intlpower.com

International

Power Sources, Inc.