XPiQ inc PU40-10SL, PU40-12SL, PU40-13SL, PU40-23SL, PU40-24SL Datasheet

40 Watts

PU40 Series

Built-in EMI Filter

•

100% Burn-in

•

Input Surge Current Protection

•

Industry Standard 3.0” x 5.0” x 1.2” Size

•

Universal Input Voltage (85-264 VAC)

•

•

•

Specification

All specifications typical at nominal line, full load and 25°C

Intelligent Design Quality Product

XPiQ inc.

Switching Power Supply

Input

Input Voltage • 85 to 264 VAC/115-280 VDC
Input Frequency • 47 to 440 Hz

Input Current • 1.2A (rms for 115 VAC

0.7A (rms) for 230 VAC

Output

Output Voltage: • See Rating Charts
Output Current • See Rating Charts
Output Power Range • 0 to 40 Watts
Ripple and Noise • 1% peak to peak max.
Overvoltage • Provided on output #1 only;

Protection: set at 112-132% of its nominal

output voltage

Overcurrent • All outputs protected to short
Protection: circuit conditions

Temperature • All outputs ±0.04%/°C
coefficient: maximum

General

Efficiency • 65% minimum at 40 watt output
Hold-up time • 10 msec minimum
Line Regulation • ±0.5% maximum at full load
Inrush Current • 15A at 115 VAC or

30A at 240 VAC at 25°C cold start

Withstand Voltage • 3000 VAC from input to output

1500 VAC from input to ground

Insulation Resistance • 10 Mohm minimum from

output to ground

Environmental

Operating • 0°C to +70°C*
Temperature

Storage • -40°C to +85°C
Temperature

MTBF • 100,000 hours minimum at full load

at 25°C ambient

EMI Requirement • Meets the conducted limits of

a) FCC 20780 Level B
b) CISPR 22 (EN 55022) Level B

Safety Requirements • Approved to:

a) UL 1950
b) CSA 22.2 #234
c) TUV per EN60950 (IEC 950)

* Derate linearly from 100% load at 50°C to 50% load at 70°C

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

www.XP-iQ.com

63

OUTPUT VOLTAGE & CURRENT RATINGS PU40

All multi-output units may be operated at no-load without damage. At no-load, output tolerance increases to 10%.

Notes

•

Mechanical Details

Pin Chart

Output #1 Output #2 Output #3 Maximum

Output

Model Vnom Imin Imax Tol. Vnom Imin Imax Tol. Vnom Imin Imax Tol. Power
PU40-10SL 5 V 0.0 A 8.0 A 2% 40 W
PU40-12SL 12 V 0.0 A 3.5 A 1% 40 W
PU40-13SL 15 V 0.0 A 3.0 A 1% 40 W
PU40-14SL 24 V 0.0 A 2.0 A 1% 40 W
PU40-23SL +5 V 0.5 A 3.0 A 3% +12 V 0.2 A 2.0 A 5% 40 W
PU40-24SL +5 V 0.5 A 3.0 A 3% +15 V 0.2 A 2.0 A 5% 40 W
PU40-25SL +5 V 0.5 A 3.0 A 3% +24 V 0.1 A 1.0 A 5% 40 W
PU40-30SL +5 V 0.5 A 3.0 A 3% +12 V 0.2 A 2.0 A 5% -5 V 0.05A 0.3 A 10% 40 W
PU40-31SL +5 V 0.5 A 3.0 A 3% +12 V 0.2 A 2.0 A 5% -12 V 0.05A 0.3 A 10% 40 W
PU40-32SL +5 V 0.5 A 3.0 A 3% +15 V 0.2 A 2.0 A 5% -15 V 0.05A 0.3 A 10% 40 W
PU40-33SL +5 V 0.5 A 3.0 A 3% +15 V 0.2 A 2.0 A 5% -12 V 0.05A 0.3 A 10% 40 W
PU40-39SL +5 V 0.5 A 3.0 A 3% +24 V 0.1 A 1.0 A 5% -12 V 0.05A 0.3 A 10% 40 W

Model 1 2 3 4 5 6

PU40-10SL, PU40-12SL OUTPUT OUTPUT OUTPUT

RETURN RETURN RETURN

PU40-13SL, PU40-14SL #1 #1 #1

PU40-23SL, PU40-24SL OUTPUT OUTPUT OUTPUT COMMON COMMON

PU40-25SL #2 #1 #1 RETURN RETURN

N.C.

PU40-30SL, PU40-31SL

PU40-32SL, PU40-33SL OUTPUT OUTPUT OUTPUT

COMMON COMMON OUTPUT

PU40-39SL #2 #1 #1

RETURN RETURN #3

NOTES:

1. Dimensions shown in inches (mm).

2. Tolerance 0.02 (0.5) maximum.

3. Input connector mates with Molex
housing 09-50-3031 and Molex 2878
series crimp terminal.

4. Output connector mates with Molex
housing 09-50-3061 and Molex 2878
series crimp terminal.

5. Weight 300 grams approx.

PH: 508 429.9883

FAX: [phone]

Email: [e-mail]

Holliston, MA 01746 USA

www.XP-iQ.com

64