30 Watts
PU30 Series
Built-in EMI Filter
•
100% Burn-in
•
Input Surge Current Protection
•
Small Size, 2.76” x 5.12” x 1.20”
•
Universal Input Voltage (85-264 VAC)
•
Overvoltage Protection
•
Overcurrent Protection
•
•
•
Specification
All specifications typical at nominal line, full load and 25°C
Intelligent Design Quality Product
XPiQ inc.
Switching Power Supply
Input
Input Voltage • 85 to 264 VAC
Input Frequency • 47 to 440 Hz
Input Current • 0.8A (rms for 115 VAC
0.5A (rms) for 230 VAC
DC Input Voltage • 115-280 VDC
Output
Output Voltage: • See Rating Charts
Output Current • See Rating Charts
Output Power Range • 0 to 30 Watts
Ripple and Noise • 1% peak to peak max.
Overvoltage • Provided on output #1 only;
Protection: set at 112-132% of its nominal
output voltage
Overcurrent • All outputs protected to short
Protection: circuit conditions
Temperature • All outputs ±0.04%/°C
coefficient: maximum
General
Efficiency • 65% minimum at 30 watt output
Hold-up time • 12 msec minimum
Line Regulation • ±0.5% maximum at full load
Inrush Current • 15A at 115 VAC or
30A at 240 VAC at 25°C cold start
Withstand Voltage • 3000 VAC from input to output
1500 VAC from input to ground
Insulation Resistance • 10 Mohm minimum from
output to ground
Environmental
Operating • 0°C to +70°C*
Temperature
Storage • -40°C to +85°C
Temperature
MTBF • 100,000 hours minimum at full load
at 25°C ambient
EMI Requirement • Meets the conducted limits of
a) FCC 20780 Level B
b) CISPR 22 (EN 55022) Level B
Safety Requirements • Approved to:
a) UL 1950
b) CSA C22.2 No.234
c) TUV per EN60950 (IEC 950)
* Derate linearly from 100% load at 50°C to 50% load at 70°C
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xp-iq.com
Holliston, MA 01746 USA
www.XP-iQ.com
61