PRELIMINARY
Q3 2003
•
•
Input
Input Voltage • 9-36 VDC
18-75 VDC
Input Current • 2.2 A max at 9 VDC input, 15 W output
Remote ON/OFF • ON = Logic High or Open,
OFF = Logic Low or shorted to -Vin
Output
Output Voltage • See Table
Output Power • 15 Watts
Output Voltage • ±10%
Adjustment
Minimum Load • 0 minimum load required
Line Regulation • ±1% maximum
Load Regulation • ±1% maximum for single output
±2% maximum for dual output
Setpoint Accuracy • ±2%
Ripple & Noise • 50 mV pk-pk for single output
75 mV pk-pk for dual output
Transient Response • 4% max deviation,
recovering to 1% of final value in less
than 500 µs after a 25% load change
Temperature • ±0.02%/°C
Coefficient
Overvoltage • See table
Protection
Overcurrent • Continuous with auto recovery
Protection
General
Efficiency • See table
MTBF • 1,000,000 hrs minimum per
MIL-HDBK-217F
Isolation Voltage • 1500 VDC Input to Output
Package Style • Copper case with non-conductive base
Size • 2.00” x 1.60” x 0.45”
Weight • 50 grams approx
Environmental
Operating • -25 °C to +100 °C derate from 100%
Temperature load at +71 °C to 0% load at +100 °C
Cooling • Convection cooled
Storage • -55 °C to +105 °C
Temperature
Humidity • 5-95% RH non-condensing
EMC & Safety
Safety Approvals • UL/cUL 1950
EMI/EMC • EN55022 Class B conducted
15 Watts
JTA15 Series
DC/DC Converters
Specification
•
PH: 508 429.9883
FAX: 800 226.2100
Email: sales@xpiq.com
Holliston, MA 01746 USA
www.XPiQ.com
Small Size 1.60” x 2.00” x 0.45”
•
Ultra Wide 4:1 Input
•
Full Power to +71 °C
•
Industry Standard Pin Out
•
Single & Dual Outputs
•
Overvoltage & Overcurrent Protection
•
UL Safety Approvals
Intelligent Design Quality Product
XPiQ inc.
* Preliminary datasheet - see website for current specs