Xomax FORD-10EU User Manual
User manual
ENGLISH
CAR NAVIGATION SYSTEM
FORD-10EU
2
FORD-10EU
CAR NAVIGATION SYSTEM
User manual
FORD-10EU
Thank you for purchasing one of our FORD-10EU products! We appreciate your
condence. Enjoy your brand new multimedia unit!
Please read the following manual carefully before you install and use the unit.
Please save this manual in case you will need to clarify further possible ques-
tions regarding installation and usage of our product.
We are constantly trying to keep our online-library of user's manuals for our
products up-to-date. In case you miss some information or if something should
be unclear, please visit our homepage www.xomax.de/download for a current
version of user's manual or contact our customer service.
i
Version 1.1
Last update 16.09.2016
Manual's version
We appreciate our environment, so to keep it safe and clean, we
do not print our manuals on paper but provide our products with
manuals in digital version created in *.pdf format.
You can nd and download them anytime on our homepage
www.xomax.de, view them on your mobile devices and print
them for yourself if needed.
Please note: Any alternations and changes of technical data or/and design
due to technical update of some models need no advertisement.
3
FORD-10EU
CAR NAVIGATION SYSTEM
EN
Thema:
List of contents
List of contents
List of contents 3
Safety instructions and precautions 4
Specications 6
Package content 7
Installation 8
Installation notes ............................ 8
Before the installation ..................... 8
Connection schedule
FORD-10EU kabel adapter 10
FORD-10EU kabel adapter
plug pin assignment 11
FORD-10EU kabel adapter
socket pin assignment 12
Connection schedule –
Cinch multicore 13
Startup operations 14
Usage of the remote control ............14
Replacement of the battery .............14
Unit on/off ....................................15
Insert a micro SD card ...................15
Insert a USB ash drive ..................15
Remote control 16
Menu setup 17
Common solutions 27
Recycling of an old unit 29
Recycling of the battery 29
4
FORD-10EU
CAR NAVIGATION SYSTEM
EN
Thema:
Safety instructions and precautions
Safety instructions and
precautions
!
Handling by stop only
To avoid any accidents please don't
handle the unit while you driving.
Please stop and park the vehicle
at safety place and handle the unit
casually.
!
Installation
Please read the following manual
carefully before you install the
unit. We recommend you to let the
technician install the unit in your
vehicle.
!
Regular loudness
Please set the loudness of the unit
to the appropriate level so you were
still able to hear exterior noises
especially trafc warning signals.
Furthermore the higher loudness
level can damage your hearing
organs.
!
Repair of the unit
Do not open the unit. Do not try to
repair the unit by yourself due to
any emerging technical problems.
While opening the unit by yourself
exists the danger to be electrocuted.
Do not use the unit any further since
you detect any kind of technical
problems. Leave all the repair opera-
tions to professional technicians.
Due to awed warranty seal the
warranty becomes invalid.
!
Power supply
Use the unit connected only to 12 Volt
on-board power supply. The minus (-)
should be connected with the ground
(GND) (negative).
Due to the wrong grounding exists the
danger of re. In case of doubt please
consult with professional technicians.
!
Replacement of fuses
While replacing the fuse please make
sure that the new fuse has the same
properties as the old one, especially the
amperage.
!
Overheating
Do not occlude the vent holes to avoid
the heat generation and accumulation
in the unit. Otherwise exists the danger
of re.
!
Regular temperature
Please make sure that the temperature
inside the vehicle amounts to not more
than +60 C. If it's too hot inside the
vehicle, do not turn the unit on until
the inside temperature of the cabin
descends.
!
5
FORD-10EU
CAR NAVIGATION SYSTEM
EN
Thema:
Safety instructions and precautions
!
Cleaning of the unit
Please keep the unit clean and remove
the dust from it regularly. Please use for
that a soft and dry cleaning rag.
Major soilings can be removed carefully
with the wet cleaning rag. Do not use
any chemical or alcohol-containing
detergents to avoid the damage of the
unit's varnish.
!
Handling the touchscreen
Do not press the touch keys or other
symbols too hard – it may lead to image
distortions, unit malfunctions and
touchscreen damages.
Do not use any sharp articles to use
the touchscreen. Please handle the
touchscreen with your nger or with the
appropriate stylus.
!
Moisture
To avoid the danger of re or the
electric shock do not put the unit in to
the moist environment (e.g. adverse
weather conditions, inappropriate wet
cleaning etc.)
6
FORD-10EU
CAR NAVIGATION SYSTEM
EN
Thema:
Specifications
Specifications
Common data
Operating voltage ............................ 12V DC
Fuse ................................................... 15 A
Instalation size .............. 2DIN - FORD specic
Audio
Output power ............................ 4 x 60 Watt
Loudspeaker impedance ............. 4 bis 8 Ohm
Frequency range ................... 20 Hz - 20 KHz
S/N ratio ........................................... 85 dB
Stereo channel separation ................... 80 dB
Display
Diagonal ............................... 7 Zoll (18 cm)
Resolution ........................... 800 x 480 Pixel
TYP ................. TFT LCD Touchscreen Display
FM-tuner
Frequency range .................. 87.5 - 108 MHz
FM sensibility ....................................... 5 dB
S/N ratio .......................................... 60 dB
IF frequency .................................. 10.7 MHz
Stereo channel separation ........ 30 dB (1kHz)
AM-Radioempfänger
Frequency range .................. 522 - 1620 KHz
AM sensibility ..................................... 28 dB
IF frequency ................................... 455 KHz
USB1-por t (front)
Plug type ............................. Typ A, miniUSB
Max. supported volume ..................... 128 GB
File system ................................exFat, Fat32
USB2-port (back)
Plug type ................................... Typ A, USB
Max. supported volume ..................... 128 GB
File system .............................. exFat , Fat32
SD-card slot
Slot typ ....... MicroSD, MicroSDHC, MicroSDXC
Max. supported volume ..................... 128 GB
File system .............................. exFat , Fat32
Bluetooth
Version ..................................... 2.0 Class 2
Prole ............................ Freisprechen, A2DP
Frequency ........................ 2.4GHz Spektrum
Any alternations and changes of
technical data or/and design due
to technical update of some mo-
dels need no advertisement. Errors
expected.
7
FORD-10EU
CAR NAVIGATION SYSTEM
EN
Thema:
Package content
Package content
Please check the accessories on
completeness.
A
The images serve as example. Optically the may vary from the original.
Please note: the package content
may vary due to technical updates.
i
B C
F
E
D
G
H
I
A
car radio
B
remote control with battery
C
Navigation software (MicroSD card)
D
Can-Bus
E
USB-Adapter (mini to normal)
F
Quadlock Adapter
G
USB extension cable
H
GPS aerial
I
installation manual
8
FORD-10EU
CAR NAVIGATION SYSTEM
EN
Thema:
Installation
Installation
Installation notes
Here you can nd relevant installation
notes and common information.
Before the installation
WARNING!
Please read the following manual care-
fully before you install the unit.
Damages caused due to an inapprop-
riate installation will not be covered by
warranty.
If you do not want to risk your warranty
entitlement, please let the technician
install the unit in your vehicle.
» To avoid a short circuit please
disconnect the vehicle battery before
the installation. To do it properly please
The detailed installation manual
you can nd on our homepage www.
xomax.de.
The printed version of a common
installation manual you can nd in
the package.
i
!
read the manual of your vehicle.
» Make sure that your vehicle is
equipped with a car radio slot of
required size (2DIN)
» As may be the case you will need a
suitable faceplate, adapter or other
accessories. These could be provided
from your local specialist supplier.
» The connection cables may not be cutted
or short-circuited. Otherwise the warranty
becomes invalid.
» Before the installation please make
sure that your vehicle has the 12 Volt
on-board power supply.
» The minus (-) should be connected
with the ground (GND) (negative).
» Please tag the polarity of the avai-
lable speakers before you disconnect
the vehicle battery.
» A proper grounding of the unit's
housing requires a clean ground
connection. Thus the grounding area
should be rust-, stain- and dust-free.
» Please ground the cable separately
from other heavy current devices such
as an amplier etc.
» Please ensure that the colored cables
are connected according to the wiring
diagram. The wrong wiring may lead to
malfunctions or even damages of the
electric elements of the vehicle.
» Please note that the connection
cables of this unit and of the other
devices may have the same purpose
Wir empfehlen, die Installation
von einer fachkundigen Person oder
einer Fachwerkstatt durchführen zu
lassen.
!
9
FORD-10EU
CAR NAVIGATION SYSTEM
EN
Thema:
Installation
but the different color. For this reason
while connecting this unit with the
other devices please ensure that both
of the cables in each case have the
same purpose. To connect everything
correctly please refer to the manuals of
the both devices.
» Please ensure that the negative
speaker cable is in each case connected
with the negative speaker terminal of
the ISO port. Do not ever connect the
negative speaker cables with the vehicle
body.
» This unit is designed and construed
for connection with 4 speakers. Do not
combine this unit with devices that are
designed and construed for connection
with 2 speakers.
» The speakers should feature the
impedance of 4-8 Ohm and a sufcient
wattage.
» Please ensure that the speakers you
are connecting with the unit are intact.
Damaged speakers can impair the unit.
» To avoid a short circuit please isolate
all cable junctions and endings of the
unused cables with the electrical tape.
» All the cables should be layed and
xated tidy and properly. The cables
should not contact any movable or hot
objects.
» If your vehicle doesn't have an "ACC"
ignition position, please connect the red
cable with the ignition switch. Otherwise the unit will not turn off automatically, causing the discharging of the
vehicle battery.
» To avoid a rogue and hazardous
short circuit do not lay the yellow cable
through the engine bay in order to
connect it with the vehicle battery.
» Do not ever connect speaker cables
among one another. In case you do not
want to connect all the 4 speakers with
the unit please isolate the endings of
unused cables with the electrical tape
to prevent a short circuit.
» Do not ever connect the negative
speaker cables with the vehicle body.
» To ensure a awless performance of
the unit the intergration angle should
amount to +/- 30.
Loading...