Xerox XAP-172i, XXAP-192i User Manual

User ' s Guide

XAP Series

LCD Monitor

XA7-17i

XA7-17i

XA7-19i

XA7-19i

©2005 by Xerox Corporation. All rights reserved.

Copyright protection claimed includes all forms and matters of copyrightable material

and information now allowed by statutory judicial law or hereinafter granted, including
without limitation, material generated from the software programs which are displayed
on the screen such as icons, screen displays, looks, etc.

XEROX® and all Xerox product names mentioned in this publication are trademarks

of XEROX CORPORATION. Other company trademarks are also acknowledged.

Changes are periodically made to this document. Changes, technical
inaccuracies, and typographic errors will be corrected in subsequent editions.

2

Xerox© LCD Monitor User’s Manual

Table of Contents

CE Marking Declaration Of Conformity .................................................4

Federal Communications Commission (FCC) Statement ....................5

Important Safety Instructions .................................................................6

1 Introduction

Features ........................................................................................................9

Package Contents .......................................................................................10

Front View and Controls .............................................................................. 11

2 Installation

Connecting Your LCD Monitor to a Computer ............................................ 12

Method 1: Analog (D-SUB) Connection ..................................................12

Method 2: Digital (DVI) Connection ........................................................14

Using Your LCD Monitor ..............................................................................16

Installing the Wall Mount (optional) to Your LCD Monitor ............................20

3 OSD Menu

Using the OSD Menu ..................................................................................21

The OSD Options ........................................................................................22

4 Technical Information

Preset Mode Timing Chart ...........................................................................25

DVI Connector PIN Assignment ..................................................................26

D-SUB Connector PIN Assignment .............................................................27

Plug and Play ..............................................................................................28

Visual Inspection .........................................................................................28

Troubleshooting ...........................................................................................29

Specifications ..............................................................................................30

Authorized Service Centers .........................................................................31

RECYCLING PLACE

ENGLISH

3Xerox© LCD Monitor User’s Manual

Recycling Place

EUROPE
When disposing of Proview products in Europe, please contact one of the following three
locations to make arrangements for recycling.

Proview International (UK) Limited
30 The Avenue, Watford, Hertfordshire
WD17 4AE United Kingdom
Timothy Lo
Tel: [phone]
Fax: [phone]
Email: [e-mail]

PGL Europe B.V. (Proview Group Limited Rotterdam)
Satijnbloem 37,
3068 JP
Rotterdam
Hollande
David Hsieh
Tel: [phone]
Fax: [phone]
Email: [e-mail]

Xoal bvba
Raketstraat 100-B1130
Bruessels
Mr. Leo Starckx
Tel: [phone]
Fax: [phone]
Email: [e-mail]
[e-mail]

ASIA
When disposing of Proview products in Asia, please contact the following location to make
arrangements for recycling.

Proview Technology (ShenZhen) Co., Ltd.
North Block 21, 23# Shatoukok Free Trade Zone, ShenZhen, China.
Mr. Dennis Chang
Tel: [phone]

Fax: [phone]
Email:[e-mail]

AMERICA
When disposing of Proview products in America, please call the following location to make
arrangements for recycling.

Proview Technology, Inc. (U.S.A.)
7373 Hunt Avenue, Garden Grove, CA 92841 U.S.A.
Patrick Yen
Tel:[phone]
Fax:[phone]
Email:[e-mail]

“THIS DISPLAY UNIT IS AN ELECTRIC DEVICE WHICH MAY CONTAIN HAZARDOUS MATERIALS
AND COMPONENTS, AND WHICH MUST BE DISPOSED OF AT END OF LIFE ACCORDING TO
THE PROPER PROCEDURE”

FCC/CE

4

Xerox© LCD Monitor User’s Manual

CE Marking
Declaration Of Conformity

This LCD monitor complies with the requirements of the EC
Directive 89/336/EEC “EMC Directive” and 73/23/EEC “Low
Voltage Directive” as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a
level that gives correct operation in residential areas,
business and light industrial premises and small-scale
enterprises, inside as well as outside of the buildings.
All places of operation are characterized by their connection
to the public low voltage power supply system.

FCC/CE

ENGLISH

5Xerox© LCD Monitor User’s Manual

This equipment has been tested and found to comply with the limits
of a class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

1. Reorient/Relocate the receiving antenna.

2. Increase the separation between the equipment
and receiver.

3. Connect the equipment into an outlet on a circuit which is
different from what the receiver is connected to.

4. Consult the dealer or an experienced radio/TV technician

for help.

CAUTION:

Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user
authority to operate the equipment.

Federal Communications

Commission (FCC) Statement

Important Safety Instructions

6

Xerox© LCD Monitor User’s Manual

To prevent any injuries, the following safety precautions should
be observed in the installation, use, servicing and maintenance
of this equipment.

Before operating this equipment, please read this manual
completely, and keep it nearby for future reference.

Important Safety Instructions

Warnings

• Do not place the equipment on any uneven or unstable
carts, stands, tables, shelves etc. The equipment may fall,
causing serious injury to children or adults and serious
damage to the equipment itself.

• Use only a cart or stand recommended by the manufacturer.
This equipment and recommended cart or stand should be
handled with care. Quick stops, excessive force, and uneven
surfaces may cause the equipment and cart/stand to
overturn.

• Do not disable the 3-wire grounding type plug. The
grounding pin on the 3-prong plug is an important feature.
Removing the grounding pin will increase the risk of
damaging the equipment. If you can not fit the plug into the
electrical outlet, contact an electrician to install a grounding
outlet.

• Always operate this equipment from the type of power
source indicated on the rear of the serial/model plate.

• Never overload wall outlets and extensions.

• Use and handle the power cord with care.

• Do not place any heavy objects on the AC power cord.

• Do not pull the AC power cord. Do not handle the AC power
cord with a wet hand.

Important Safety Instructions

ENGLISH

7Xerox© LCD Monitor User’s Manual

• Do not touch the power cord and antenna cable during
lightning.

• Remove the plug from the wall outlet if the equipment will
not be used for a long period of time.

• Do not place, use or handle this equipment near water.

• Never expose the equipment to liquid, rain, or moisture.

Seek qualified service if any of the above is spilled into the

equipment.

• Do not attempt to service the equipment yourself.

• Opening and removing the covers may expose you to
dangerous voltage or other hazards and may void your
warranty. Refer service to qualified personnel.

• Always remove the power cord from the outlet before
cleaning the equipment.

• Never use liquid or aerosol cleaners on the equipment.
Clean only with a soft dry cloth.

• Do not expose the equipment to extreme temperature or to
direct sunlight, as the equipment may heat up and suffer
damage.

• Do not install the equipment near any heat sources such as
radiators, heat registers, stoves, or any other apparatus that
might produce heat.

• Do not block any ventilating openings. Leave an open space
around the equipment.

• Never place the equipment :on a bed, sofa, rug, or any other
similar surfaces; too close to drapes/curtains/walls, in a
bookcase, built-in cabinet, or any other similar places that
may cause poor ventilation.

(continued on next page)

Important Safety Instructions

8

Xerox© LCD Monitor User’s Manual

• If any of the following conditions occur, unplug the power
cord from the outlet and request service from qualified
personnel.

a. The power cord or plug is damaged.
b. Liquid is spilled into the product .
c. An object falls onto or into the product.
d. The product has been dropped or damaged.
e. The product’s display is abnormal.

DISPOSAL OF WASTE ELECTRONIC EQUIPMENT BY PRIVATE
HOUSEHOLDS WITHIN THE EUROPEAN UNION

This sign indicates that this product may not be disposed of with your
regular household waste. The recycling and separate collection of such
products is your responsibility. Please drop off the above-mentioned
waste at a designated place for recycling waste electrical and electronic
equipment. If you do not know where to drop off your waste equipment
for recycling, please contact your local city office or household waste

collection service.

9Xerox© LCD Monitor User’s Manual

Introduction

ENGLISH

• Rapid Video Response
Fast action media such as gaming, DVD and video

conferencing will playback smoothly thanks to the rapid video
8ms response time of the LCD panel.

• Adjustable Ergonomic Xstand
This stand is versatile for users to make any adjustment

comfortable for use. Besides the existing VESA mount ability,
users can tilt, swivel, pivot and adjust the height of the
monitor.

• XshieldTM Protective Glass
Xshield protective glass combines extra LCD protection with

sophisticated visual flair.

• Anti-Reflective Coating
Special panel coating to efficiently reduce distracting glare on

images viewed.

• Multimedia Enhanced Speakers
True multimedia sound without using valuable desktop space.

The XAP series features two built-in 2w stereo speakers
integrated into the stylish design.

• Professional DVI Input
Digital Video Input (DVI) provides precise digital image

display, and the XAP series the flexibility to accept both
digital or analog signals.

1 Introduction

Features

10

Xerox© LCD Monitor User’s Manual

Introduction

Make sure all of the following contents are included in the box.
If any items are missing, please return this product to the
original place of purchase.

CAUTION:

Be sure to save original box and all packing material for future
transport of monitor.

Power Cord*

DVI-I to D-SUB

Adapter

* Power cord specification : H05 VV-F 3G 0.75mm

2

Package Contents

LCD Monitor

Quick
Guide

Warranty

Card

CD-ROM

(Driver/Manual)

11Xerox© LCD Monitor User’s Manual

Introduction

ENGLISH

Front View and Controls

MENU

Press once to display the OSD (On Screen Display). And

press to activate the items you highlight .

DOWN/UP

In OSD mode, press the DOWN/UP buttons to move the

selection highlight to the next menu item counterclockwise
or clockwise, respectively. Adjusts the volume up and down.

AUTO
Press to automatically adjust the display settings to optimize

performance based on the D-SUB signal.

LED

The LED light indicates when the LCD monitor is activated

(blue light indicates power on and amber light indicates
power saving).

POWER

Turns the LCD monitor on and off.

1

2

3

4

5

1

2

3

4

5

Installation

12

Xerox© LCD Monitor User’s Manual

1 Turn off the computer and unplug the power cable.

2 Fit the DVI-I to D-SUB adapter onto the signal cable of the

LCD monitor.

3 Connect the signal cable to the D-SUB port on the back of

the computer.

4 Connect the audio cable to the line-in port on the back of the

computer.

Refer to the owner’s manual of the computer for connections.
In the process of connecting external equipment, do not connect
any AC power cords to wall outlets until all other connections
are completed.

4

2

Attach the DVI-I to D-SUB
adapter and connect to the
D-SUB port

2 Installation

Connecting Your LCD Monitor to a Computer

Connect to the
Line-in port

Method 1: Analog (D-SUB) Connection

3

Installation

ENGLISH

13Xerox© LCD Monitor User’s Manual

Connect to power source

5

5 Connect the power cord to wall outlet and LCD monitor.

6 Press the POWER button, located on the bottom side of the

main unit to turn the monitor on, then turn the computer on. If
the monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.

NOTE:

Unplug the monitor before installation to avoid electric shock or
damage.

Installation

14

Xerox© LCD Monitor User’s Manual

3

Method 2: Digital (DVI) Connection

1 Turn off the computer and unplug the power cable.

2 Connect the signal cable (DVI-I) to the DVI port on the back

of the computer.

3 Connect the audio cable to the line-in port on the back of the

computer.

4 Connect the power cord to wall outlet and LCD monitor.

5 Press the POWER button, located on the bottom side of the

main unit to turn the monitor on, then turn the computer on. If
the monitor displays an image, the monitor is successfully
installed. If no image is displayed, check all connections.

2

Connect to the DVI port

Connect to the
Line-in port

Connect to power source

4

Installation

ENGLISH

15Xerox© LCD Monitor User’s Manual

If the screen displays “out of range”, please follow the
instructions below to set up:

• Press the MENU button to display the OSD.

• Press the UP or DOWN button to highlight the (INPUT

SELECT) icon, then press the MENU button. The OSD
displays:

• Press the UP or DOWN button to select DIGITAL INPUT.

1

2

1

2

DIGITAL INPUT

NOTE:

The POWER button is used for switching the LCD monitor on
and off, it does not disconnect the device from the main voltage.
To completely disconnect the main voltage, please remove the
power plug from the socket.

NOTE:

The LED indicator is blue when the monitor operates normally
and will turn to amber when in power saving mode. When the
monitor is off, the LED turns dark.

Installation

16

Xerox© LCD Monitor User’s Manual

Using Your LCD Monitor

In order to ensure a healthy and relaxed body position when
using the monitor at visual display workstations, you are able to
adjust the monitor’s angle or height of the stand.

1 The angle of the LCD monitor may be adjusted

approximately 40 degrees.

-5

o

35

o

2 Use one hand to turn right the monitor. The pivot rotation of

the LCD monitor may be adjusted approximately 90 degrees.

If your display driver supports rotation, you can typically find
the settings for this function in your display driver’s
SETTINGS dialog.

Installation

ENGLISH

17Xerox© LCD Monitor User’s Manual

NOTE:

If you find that your display card driver does not offer this
feature, you can purchase aftermarket rotation software
from manufacturers such as Portrait Displays. This monitor
manufacturer provides no warranty with respect to the use of
aftermarket display software.

To access the SETTINGS dialog box, go to

START>SETTINGS>CONTROL PANEL>DISPLAY. Inside
the DISPLAY PROPERTIES window, go to the SETTINGS
Tab.

If the feature is available, you will find it listed within this

dialog box. If you have trouble locating this feature, you
might also visit the website of your display driver
manufacturer (whose name should be displayed on the
DISPLAY PROPERTIES>SETTINGS tab) for technical
assistance.

Installation

18

Xerox© LCD Monitor User’s Manual

3 The height of the LCD monitor’s stand may be adjusted

approximately 12cm. Be sure to follow the sequence
described below.

Step1.
First, release the LCD monitor’s stand lock.

Use one hand to push the upper end of stand down, while

using the other hand to press the stand’s lock button to
unlock.

Stand Lock Button

Stand Post

Step2.

With the stand lock released, move the stand post up or

down slowly to the desired position.

Installation

ENGLISH

19Xerox© LCD Monitor User’s Manual

4 Use one hand to change the monitor’s swivel angle .

The swivel angle of the LCD monitor may be adjusted

approximately 60 degrees.

30

o

30

o

Step3.
Next, adjust the height of the stand’s post

Use one hand to press down the upper end of stand to

lower the height of the stand’s post, you should feel some
resistance to this motion.

NOTE:

When the stand’s post is moved into lock position, please repeat
Step 1 to release.

Installation

20

Xerox© LCD Monitor User’s Manual

If you wish to lock the LCD monitor on a wall, carefully follow
the instructions below.

Installing the Wall Mount (optional) to Your LCD Monitor

NOTE:

For instructions on wall-mount installation, please refer to the
installation guide provided by the wall-mount kit vendor.

1 Remove the screws on the back of the stand.

2 Affix the VESA mount to the back of the LCD monitor using

the four screws provided in the wall-mount kit.

OSD Menu

ENGLISH

21Xerox© LCD Monitor User’s Manual

To create the best picture, your XAP series has been preset at
the factory with the Preset Mode Timing shown on page 25.
The OSD (On Screen Display) Menu allows the user to adjust
various settings and options by following the steps below.

1 Press the MENU button to display the OSD. The OSD main

menu provides an overview of the selection of controls
available.

2 Press the UP or DOWN button to highlight the desired icon.

Then, press the MENU button to activate the highlighted
icon

3 Press the UP or DOWN button to change the value of the

selected item.

4 Select the EXIT icon to exit the OSD.

5 Repeat steps 1 through 4 to make further adjustments. All

changes are stored immediately.

BRIGHTNESS

Using the OSD Menu

3 OSD Menu

OSD Menu

22

Xerox© LCD Monitor User’s Manual

The OSD menu includes the following options:

O BRIGHTNESS

Controls the overall brightness.

CONTRAST
Controls the difference between the brightest and darkest

regions of the picture.

H. POSITION
Adjusts the position of the picture left and right in the

window.

V. POSITION
Adjusts the position of the picture up and down in the

window.

H.SIZE
Adjusts the width of the picture.

PHASE

Adjusts signal phase, which can improve focus clarity and
image stability.

The OSD Options

BRIGHTNESS

OSD Menu

ENGLISH

23Xerox© LCD Monitor User’s Manual

INPUT SELECT
Allows selection of ANALOG INPUT or DIGITAL INPUT
depending on the type of input signal currently in use.

RESET

Restores all options to the factory settings.

LANGUAGE

Controls which language is used on all the on-screen menus.

COLOR
Allows selection of the general color tint:
Select User Mode, WARM, or COOL.

RED

WARMCOOL

Select User Mode

Allows the user to adjust red, green and blue color
component levels independently.

COOL

Inclines colors toward the blue end of the spectrum.
Fixes the red, green and blue component levels at
factory settings; they cannot be independently adjusted.

WARM

Inclines colors toward the red end of the spectrum.
Fixes the red, green and blue component levels at
factory settings; they cannot be independently adjusted.

EXIT

Exits the OSD menu.

OSD Menu

24

Xerox© LCD Monitor User’s Manual

EXIT

Exits the OSD.

OSD

Changes the position of the OSD.

H. POSITION

Moves the OSD left and right in the window.

V. POSITION

Moves the OSD up and down in the window.

EXIT

Exits the OSD menu.

Technical Information

ENGLISH

25Xerox© LCD Monitor User’s Manual

The screen image has been optimized during manufacture for
the display modes listed below.

Video signal: (IBM PC/AT)

Dot X Line

Horizontal

Frequency(kHz)

Vertical

Frequency(Hz)

720 x 400 31.47 70.00

640 x 480 31.47 60.00

37.86 72.80

37.50 75.00

800 x 600 35.16 56.25

37.88 60.30

48.08 72.20

46.87 75.00

1024 x 768 48.36 60.00

56.48 70.10

60.02 75.00

1280 x 1024 63.98 60

79.98 75

Preset Mode Timing Chart

4 Technical Information

Technical Information

26

Xerox© LCD Monitor User’s Manual

PIN DESCRIPTION PIN DESCRIPTION

1 TMDS Data 2- 15 GND

2 TMDS Data 2+ 16 Hot Plug Detect

3 TMDS Data 2/4 shield 17 TMDS Data 0-

4 18 TMDS Data 0+

5 19 TMDS Data 0/5 shield

6 DDC Clock 20

7 DDC Data 21

8 Analog Vertical Sync 22 Clock shield

9 TMDS Data 1- 23 Clock +

10 TMDS Data 1+ 24 Clock -

11 TMDS Data 1/3 shield C1 Analog red

12 C2 Analog green

13 C3 Analog blue

14 +5V Power C4 Analog

1 8

169

17 24

C1 C2

C3 C4

DVI Connector PIN Assignment

Technical Information

ENGLISH

27Xerox© LCD Monitor User’s Manual

PIN DESCRIPTION

1 Red

2 Green

3 Blue

4 Ground

5 Self Test

6 Red Ground

7 Green Ground

8 Blue Ground

9 5 VDC

10 Ground

11 Ground

12 SDA (FOR DDC)

13 H. Sync

14 V. Sync

15 SCL (FOR DDC)

1 5

6

11

5

10

1

D-SUB Connector PIN Assignment

Technical Information

28

Xerox© LCD Monitor User’s Manual

Permanently unlit or lit pixels

The standard of production techniques today cannot guarantee
an absolutely fault free LCD display. A few isolated permanently
lit or unlit pixels may be present. The maximum permitted
number of pixel faults is stipulated in the stringent international
standard ISO 13406-2 (Class II).

Example:
A 17” flat-screen monitor with a resolution of 1280 x 1024
has 1280 x 1024 = 1310720 pixels. Each pixel consists of
three subpixels (red, green and blue), so there are about 4
million dots in total.

According to ISO 13406-2 (Class II), a maximum of 6 pixels and
7 subpixels may be defective, i. e. a total of 25 faulted dots. This
corresponds to approx. 0.002 % of the entire screen surface.

Visual Inspection

This monitor conforms to the VESA DDC (Display Data
Channel) standard, which means that when it is used with a
DDC compatible video card, the monitor is easier to set up.
With VESA DDC 1/2B, when the monitor is turned on, it will
automatically notify a windows 9X/2000/XP host computer of its
scanning frequencies, capabilities and characteristics. Windows
9X/2000/XP will automatically recognize the presence of the
monitor and select the appropriate display resolution.

Plug and Play

Technical Information

ENGLISH

29Xerox© LCD Monitor User’s Manual

Before consulting service personnel, check the following
chart for a possible cause and solution to the trouble you are
experiencing.

Monitor will not turn on

• Make sure the power cord is plugged in.

No picture

• Make sure the power cord is plugged in.

• Check the signal cable connecting the LCD monitor

and the computer (refer to page 12-14).

• Press the POWER button on the front panel of the

monitor.

Poor picture or abnormal picture

• Check the DVI cable connecting the LCD monitor and

the computer (refer to page 12-14).

• Press the MENU button to adjust the Brightness

Contrast option in the OSD.

• Adjust the Color Select option in the OSD.

• Press the AUTO button on the front panel of the

monitor, to automatically adjust the display mode.

Out of range message appears

• Press the MENU button. Highlight the INPUT SELECT

icon, then press the MENU button. Press the UP or

DOWN button to select DIGITAL INPUT

(refer to page 15).

• If using Windows 9X/2000/XP, wait a few seconds;

once Windows detects the problem, a dialog will
appear allowing you to manually set up the video
mode according to the preset mode timing chart

(refer to page 25).

Troubleshooting

Technical Information

30

Xerox© LCD Monitor User’s Manual

Specifications

MODEL XAP-172i XXAP-192i

LCD Panel Panel Size 17’ TFT LCD 19” TFT LCD

Brightness 300 300

Contrast Ratio 500:1 500:1

Dot Pitch 0.264mm x 0.264mm 0.294mm x 0.294mm

Max. Resolution 1280x1024 1280x1024

Speakers Built-In Built-In

Input Connector DVI/D-SUB/AUDIO DVI/D-SUB/AUDIO

Power Source AC100-240V, 50-60Hz AC100-240V, 50-60Hz

Power Consumption 48W 48W

Dimension 380x392x205 mm 426x410x205 mm

Changes are periodically made to this specifications.
Current specifications may also be obtained via the internet,
www.xerox-displays.com or www.xerox-displays.info

Technical Information

ENGLISH

31Xerox© LCD Monitor User’s Manual

U.S.A.
CALIFORNIA: AUTHORIZED SERVICE CENTER
7373 HUNT AVENUE
GARDEN GROVE, CA 92841
[phone]
[phone]
[phone] Fax
Hours: 8AM ~ 6PM - Pacific Standard Time

TEXAS: AUTHORIZED SERVICE CENTER
10849 KINGHURST SUITE # 120
HOUSTON, TX 77099
[phone]
[phone] Fax
Hours: 8AM ~ 6PM - Central Time

EUROPE
AUTHORIZED SERVICE CENTER CONTACTS:
XOAL BVBA
RAKETSRAAT 100
B-1130 BRUSSEL BELGIUM
E-EMAIL: [e-mail]
http://www.proview-repair.com
Hotline: [phone]
Fax: [phone]
Hours: 10AM ~ 12PM and 2PM ~ 5PM
Monday through Friday

Authorized Service Centers