Xerox Printer Access Facility XPAF Migration Guide

XPAF 5.0

Upgrade from XPAF 3.0.4/XPAF 4.0
Quick Reference

August 2011

Xerox Corporation
Global Knowledge and Language Services
800 Phillips Road - Bldg. 845-17S
Webster, NY 14580

Copyright © 1996-2011 Xerox Corporation. All rights reserved. XEROX®, Xerox Canada Ltd®, Xerox Limited®, FreeFlow™, The
Document Company® and all identifying numbers used in connection with the Xerox products mentioned in this publication are trademarks
of XEROX CORPORATION. Copyright protection claimed includes all forms and matters of copyrightable material and information now
allowed by statutory or judicial law or hereinafter granted, including without limitations, material generated from the software programs
which are displayed on the screen such as styles, templates, icons, screen displays looks, etc.

While every care has been taken in the preparation of this material, no liability will be accepted by Xerox Corporation arising out of any
inaccuracies or omissions.

Printed in the United States of America.

Xerox welcomes your suggestions and feedback on this document.

Copyright protection claimed includes all forms and matters of copyrightable material and information now allowed by statutory or
judicial law or hereinafter granted, including without limitation, material generated from the software programs that are displayed
on the screen, such as icons, screen displays, looks, etc.

Produced in the United States of America.

Other company trademarks are acknowledged as follows:
Xerox® and the identifying product names and numbers herein are trademarks of Xerox Corporation.
All non-Xerox brands and product names are trademarks or registered trademarks of their respective companies.
Companies, names, and data used in examples herein are fictitious unless otherwise noted.

Changes are periodically made to this document. Changes, technical inaccuracies, and typographical errors will be corrected in
subsequent editions.

ii

1.Table of contents

1. Table of contents iii

2. Introduction 5

Overview .................................................................................................................................................................................... 5

Install the base software .......................................................................................................................... 5

Skip the installation of resources .......................................................................................................... 5

Assemble and install any XPAF User exits ......................................................................................... 5

Add the XPAF 5.0 license key .................................................................................................................. 5

3. Electronic Installation 6

Download the installation files .............................................................................................................. 6

Generate the Stage Two installation members .............................................................................. 7

Run the installation jobs ......................................................................................................................... 10

4. Preparing a test FSS 13

Define the subsystem name ............................................................................................................................................ 13

APF Authorize the XPAF Load Library .......................................................................................................................... 13

ACF Authorize the XOSF started task for TCP/IP .................................................................................................... 13

Preparing a JES2 system ................................................................................................................................................... 14

XPAF 3.0 and XPAF 4.0 to XPAF 5.0 Upgrade (August 15, 2011) iii

Overview

2. Introduction

This document provides an overview of the customization tasks necessary to upgrade
an earlier version of XPAF to XPAF 5.0. It is intended as a quick reference guide for
users familiar with the XPAF installation process.

For additional information on the subjects covered in this document, refer to the XPAF

5.0 User Documentation manual, Section Two.

For more information on the MVS commands, refer to the IBM “MVS System
Commands” manual for your operating system level.

This section provides an overview of the steps necessary to upgrade your XPAF
system.

Install the base software

Upgrading an existing XPAF 3.0 or 4.0 system to XPAF 5.0 simply requires installing
the XPAF 5.0 base software and latest maintenance. The XPAF 5.0 software, by
default, will reside in its own SMPE CSI.

Skip the installation of resources

Since no new resources have been added, or existing resource formats changed, with
XPAF 5.0, existing XPAF 3.0 and 4.0 resource libraries can be used with the XPAF 5.0
system.

Assemble and install any XPAF User exits

If you are using any XPAF user exits in your current XPAF system, you will need to
reassemble and install them in your 5.0 system. Refer to the “Installing User Exits”
section of the XPAF 5.0 User documentation (Page 3-43, PDF page 115) for additional
information.

Add the XPAF 5.0 license key

If you are upgrading from XPAF 4.0, copy your existing XPAF license string from the
XPAF 4.0 XINPARM(XINSLSTR) to your new XPAF 5.0 XINPARM PDS.

If you are upgrading from XPAF 3.0, and do not have a license string for XPAF 5.0,
contact your local Xerox Sales Representative to obtain a license string.

XPAF 5.0 will not function without a valid license string.

XPAF 3.0 and XPAF 4.0 to XPAF 5.0 Upgrade (August 15, 2011) 5